Download or read book Finite Element Methods for Flow Problems written by Jean Donea and published by John Wiley & Sons. This book was released on 2003-06-02 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Die Finite-Elemente-Methode, eines der wichtigsten in der Technik verwendeten numerischen Näherungsverfahren, wird hier gründlich und gut verständlich, aber ohne ein Zuviel an mathematischem Formalismus abgehandelt. Insbesondere geht es um die Anwendung der Methode auf Strömungsprobleme. Alle wesentlichen aktuellen Forschungsergebnisse wurden in den Band aufgenommen; viele davon sind bisher nur verstreut in der Originalliteratur zu finden.

Download or read book Finite Element Methods for Incompressible Flow Problems written by Volker John and published by Springer. This book was released on 2016-10-27 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores finite element methods for incompressible flow problems: Stokes equations, stationary Navier-Stokes equations and time-dependent Navier-Stokes equations. It focuses on numerical analysis, but also discusses the practical use of these methods and includes numerical illustrations. It also provides a comprehensive overview of analytical results for turbulence models. The proofs are presented step by step, allowing readers to more easily understand the analytical techniques.

Download or read book Finite Element Methods for Viscous Incompressible Flows written by Max D. Gunzburger and published by Elsevier. This book was released on 2012-12-02 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite Element Methods for Viscous Incompressible Flows examines mathematical aspects of finite element methods for the approximate solution of incompressible flow problems. The principal goal is to present some of the important mathematical results that are relevant to practical computations. In so doing, useful algorithms are also discussed. Although rigorous results are stated, no detailed proofs are supplied; rather, the intention is to present these results so that they can serve as a guide for the selection and, in certain respects, the implementation of algorithms.

Download or read book Finite Element Methods for Computational Fluid Dynamics written by Dmitri Kuzmin and published by SIAM. This book was released on 2014-12-18 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This informal introduction to computational fluid dynamics and practical guide to numerical simulation of transport phenomena covers the derivation of the governing equations, construction of finite element approximations, and qualitative properties of numerical solutions, among other topics. To make the book accessible to readers with diverse interests and backgrounds, the authors begin at a basic level and advance to numerical tools for increasingly difficult flow problems, emphasizing practical implementation rather than mathematical theory.?Finite Element Methods for Computational Fluid Dynamics: A Practical Guide?explains the basics of the finite element method (FEM) in the context of simple model problems, illustrated by numerical examples. It comprehensively reviews stabilization techniques for convection-dominated transport problems, introducing the reader to streamline diffusion methods, Petrov?Galerkin approximations, Taylor?Galerkin schemes, flux-corrected transport algorithms, and other nonlinear high-resolution schemes, and covers Petrov?Galerkin stabilization, classical projection schemes, Schur complement solvers, and the implementation of the k-epsilon turbulence model in its presentation of the FEM for incompressible flow problem. The book also describes the open-source finite element library ELMER, which is recommended as a software development kit for advanced applications in an online component.?

Download or read book Fundamentals of the Finite Element Method for Heat and Fluid Flow written by Roland W. Lewis and published by John Wiley and Sons. This book was released on 2008-02-07 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat transfer is the area of engineering science which describes the energy transport between material bodies due to a difference in temperature. The three different modes of heat transport are conduction, convection and radiation. In most problems, these three modes exist simultaneously. However, the significance of these modes depends on the problems studied and often, insignificant modes are neglected. Very often books published on Computational Fluid Dynamics using the Finite Element Method give very little or no significance to thermal or heat transfer problems. From the research point of view, it is important to explain the handling of various types of heat transfer problems with different types of complex boundary conditions. Problems with slow fluid motion and heat transfer can be difficult problems to handle. Therefore, the complexity of combined fluid flow and heat transfer problems should not be underestimated and should be dealt with carefully. This book: Is ideal for teaching senior undergraduates the fundamentals of how to use the Finite Element Method to solve heat transfer and fluid dynamics problems Explains how to solve various heat transfer problems with different types of boundary conditions Uses recent computational methods and codes to handle complex fluid motion and heat transfer problems Includes a large number of examples and exercises on heat transfer problems In an era of parallel computing, computational efficiency and easy to handle codes play a major part. Bearing all these points in mind, the topics covered on combined flow and heat transfer in this book will be an asset for practising engineers and postgraduate students. Other topics of interest for the heat transfer community, such as heat exchangers and radiation heat transfer, are also included.

Download or read book The Intermediate Finite Element Method written by Darrell W. Pepper and published by Routledge. This book was released on 2017-11-01 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a follow-up to the introductory text written by the same authors. The primary emphasis on this book is linear and nonlinear partial differential equations with particular concentration on the equations of viscous fluid motion. Each chapter describes a particular application of the finite element method and illustrates the concepts through example problems. A comprehensive appendix lists computer codes for 2-D fluid flow and two 3-D transient codes.

Download or read book Characteristics Finite Element Methods in Computational Fluid Dynamics written by Joe Iannelli and published by Springer Science & Business Media. This book was released on 2006-09-24 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details a systematic characteristics-based finite element procedure to investigate incompressible, free-surface and compressible flows. Several sections derive the Fluid Dynamics equations from first thermo-mechanics principles and develop this multi-dimensional and infinite-directional upstream procedure by combining a finite element discretization with an implicit non-linearly stable Runge-Kutta time integration for the numerical solution of the Euler and Navier Stokes equations.

Download or read book The Finite Element Method with Heat Transfer and Fluid Mechanics Applications written by Erian A. Baskharone and published by Cambridge University Press. This book was released on 2014 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook begins with the finite element method (FEM) before focusing on FEM in heat transfer and fluid mechanics.

Download or read book Discontinuous Finite Elements in Fluid Dynamics and Heat Transfer written by Ben Q. Li and published by Springer Science & Business Media. This book was released on 2006-06-29 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past several years, significant advances have been made in developing the discontinuous Galerkin finite element method for applications in fluid flow and heat transfer. Certain unique features of the method have made it attractive as an alternative for other popular methods such as finite volume and finite elements in thermal fluids engineering analyses. This book is written as an introductory textbook on the discontinuous finite element method for senior undergraduate and graduate students in the area of thermal science and fluid dynamics. It also can be used as a reference book for researchers and engineers who intend to use the method for research in computational fluid dynamics and heat transfer. A good portion of this book has been used in a course for computational fluid dynamics and heat transfer for senior undergraduate and first year graduate students. It also has been used by some graduate students for self-study of the basics of discontinuous finite elements. This monograph assumes that readers have a basic understanding of thermodynamics, fluid mechanics and heat transfer and some background in numerical analysis. Knowledge of continuous finite elements is not necessary but will be helpful. The book covers the application of the method for the simulation of both macroscopic and micro/nanoscale fluid flow and heat transfer phenomena.

Download or read book Multiphysics Modeling with Finite Element Methods written by William B J Zimmerman and published by World Scientific Publishing Company. This book was released on 2006-10-25 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite element methods for approximating partial differential equations that arise in science and engineering analysis find widespread application. Numerical analysis tools make the solutions of coupled physics, mechanics, chemistry, and even biology accessible to the novice modeler. Nevertheless, modelers must be aware of the limitations and difficulties in developing numerical models that faithfully represent the system they are modeling. This textbook introduces the intellectual framework for modeling with Comsol Multiphysics, a package which has unique features in representing multiply linked domains with complex geometry, highly coupled and nonlinear equation systems, and arbitrarily complicated boundary, auxiliary, and initial conditions. But with this modeling power comes great opportunities and great perils. Progressively, in the first part of the book the novice modeler develops an understanding of how to build up complicated models piecemeal and test them modularly. The second part of the book introduces advanced analysis techniques. The final part of the book deals with case studies in a broad range of application areas including nonlinear pattern formation, thin film dynamics and heterogeneous catalysis, composite and effective media for heat, mass, conductivity, and dispersion, population balances, tomography, multiphase flow, electrokinetic, microfluidic networks, plasma dynamics, and corrosion chemistry. As a revision of Process Modeling and Simulation with Finite Element Methods, this book uses the very latest features of Comsol Multiphysics. There are new case studies on multiphase flow with phase change, plasma dynamics, electromagnetohydrodynamics, microfluidic mixing, and corrosion. In addition, major improvements to the level set method for multiphase flow to ensure phase conservation is introduced. More information about COMSOL can be found here.

Download or read book Finite Element Techniques in Groundwater Flow Studies written by I. Kazda and published by Elsevier. This book was released on 2012-12-02 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The finite element method (FEM) is one of those modern numerical methods whose rise and development was incited by the rapid development of computers. This method has found applications in all the technical disciplines as well as in the natural sciences.One of the most effective applications of the finite element method is its use for the solution of groundwater flow problems encountered in the design and maintenance of hydraulic structures and tailing dams, in soil mechanics, hydrology, hydrogeology and engineering geology.The stimuli to write this book came from the results obtained in the solution of practical problems connected both with the construction and maintenance of fill-type dams and tailing dams and the utilization of groundwater in Czechoslovakia, and on the other hand from the experience gained in teaching hydraulic structures theory at the Faculty of Civil Engineering of the Technical University of Prague. All the experience so far obtained shows markedly the advantages of the finite element method and the great possibilities of its further development as well as its considerable demands on the algorithmization, programming and use of computer possibilities. The reader will find an explanation of the fundamentals of the finite element method directed mainly toward isoparametric elements having an exceptional adaptability and numerical reliability. The finite element method application to groundwater flow concerns mainly two-dimensional problems, which occur most frequently in practice. Considerable attention is given to non-linear and non-stationary problems, which are most important in application.A computer program (based on the eight-noded isoparametric elements) is included and fully documented.The book will be useful to civil engineers, hydrogeologists and engineering geologists who need the finite element method as a solution tool for the complex problems encountered in engineering practice.

Download or read book Finite Element Methods in Mechanics written by Noboru Kikuchi and published by CUP Archive. This book was released on 1986-06-12 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a textbook written for mechanical engineering students at first-year graduate level. As such, it emphasizes the development of finite element methods used in applied mechanics. The book starts with fundamental formulations of heat conduction and linear elasticity and derives the weak form (i.e. the principle of virtual work in elasticity) from a boundary value problem that represents the mechanical behaviour of solids and fluids. Finite element approximations are then derived from this weak form. The book contains many useful exercises and the author appropriately provides the student with computer programs in both BASIC and FORTRAN for solving them. Furthermore, a workbook is available with additional computer listings, and also an accompanying disc that contains the BASIC programs for use on IBM-PC microcomputers and their compatibles. Thus the usefulness and versatility of this text is enhanced by the student's ability to practise problem solving on accessible microcomputers.

Download or read book Basic Control Volume Finite Element Methods for Fluids and Solids written by Vaughan R. Voller and published by World Scientific. This book was released on 2009 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Control Volume Finite Element Method (CVFEM) is a hybrid numerical methods, combining the physics intuition of Control Volume Methods with the geometric flexibility of Finite Element Methods. The concept of this monograph is to introduce a common framework for the CVFEM solution so that it can be applied to both fluid flow and solid mechanics problems. To emphasize the essential ingredients, discussion focuses on the application to problems in two-dimensional domains which are discretized with linear-triangular meshes. This allows for a straightforward provision of the key information required to fully construct working CVFEM solutions of basic fluid flow and solid mechanics problems.

Download or read book FINITE ELEMENT METHODS written by CHENNAKESAVA R. ALAVALA and published by PHI Learning Pvt. Ltd.. This book was released on 2008-11-10 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite Element Methods form an indispensable part of engineering analysis and design. The strength of FEM is the ease and elegance with which it handles the boundary conditions. This compact and well-organized text presents a comprehensive analysis of Finite Element Methods (FEM). The book gives a clear picture of structural, torsion, free-vibration, heat transfer and fluid flow problems. It also provides detailed description of equations of equilibrium, stress-strain relations, interpolation functions and element design, symmetry and applications of FEM. The text is a synthesis of both the physical and the mathematical characteristics of finite element methods. A question bank at the end of each chapter comprises descriptive and objective type questions to drill the students in self-study. KEY FEATURES Includes step-by-step procedure to solve typical problems using ANSYS® software. Gives numerical problems in SI units. Elaborates shaper functions for higher-order elements. Furnishes a large number of worked-out examples and solved problems. This profusely illustrated, student-friendly text is intended primarily for undergraduate students of Mechanical/Production/Civil and Aeronautical Engineering. By a judicious selection of topics, it can also be profitably used by postgraduate students of these disciplines. In addition, practising engineers and scientists should find it very useful besides students preparing for competitive exams.

Download or read book Finite Element Techniques for Fluid Flow written by J. J. Connor and published by Newnes. This book was released on 2013-09-11 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite Element Techniques for Fluid Flow describes the advances in the applications of finite element techniques to fluid mechanics. Topics covered range from weighted residual and variational methods to interpolation functions, inviscid fluids, and flow through porous media. The basic principles and governing equations of fluid mechanics as well as problems related to dispersion and shallow water circulation are also discussed. This text is comprised of nine chapters; the first of which explains some basic definitions and properties as well as the basic principles of weighted residual and variational methods. The reader is then introduced to the simple finite element concepts and models, and gradually to more complex applications. The chapters that follow focus on the governing equations of fluid flow, the solutions to potential type problems, and viscous flow problems in porous media. The solutions to more specialized problems are also presented. This book also considers how circulation problems can be tackled using finite elements, presents a solution to the mass transfer equation, and concludes with an explanation of how to solve general transient incompressible flows. This source will be of use to engineers, applied mathematicians, physicists, self-taught students, and research workers.

Download or read book Finite Elements in Fluids written by R. Gallagher and published by . This book was released on 1975 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introductory Finite Element Method written by Chandrakant S. Desai and published by CRC Press. This book was released on 2017-12-19 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although there are many books on the finite element method (FEM) on the market, very few present its basic formulation in a simple, unified manner. Furthermore, many of the available texts address either only structure-related problems or only fluid or heat-flow problems, and those that explore both do so at an advanced level. Introductory Finite Element Method examines both structural analysis and flow (heat and fluid) applications in a presentation specifically designed for upper-level undergraduate and beginning graduate students, both within and outside of the engineering disciplines. It includes a chapter on variational calculus, clearly presented to show how the functionals for structural analysis and flow problems are formulated. The authors provide both one- and two-dimensional finite element codes and a wide range of examples and exercises. The exercises include some simpler ones to solve by hand calculation-this allows readers to understand the theory and assimilate the details of the steps in formulating computer implementations of the method. Anyone interested in learning to solve boundary value problems numerically deserves a straightforward and practical introduction to the powerful FEM. Its clear, simplified presentation and attention to both flow and structural problems make Introductory Finite Element Method the ideal gateway to using the FEM in a variety of applications.