Download or read book Finite Element Method Applied to Groundwater Contamination Problems written by Guillermo Cabrera and published by . This book was released on 1975 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Finite Element Techniques in Groundwater Flow Studies written by I. Kazda and published by Elsevier. This book was released on 2012-12-02 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The finite element method (FEM) is one of those modern numerical methods whose rise and development was incited by the rapid development of computers. This method has found applications in all the technical disciplines as well as in the natural sciences.One of the most effective applications of the finite element method is its use for the solution of groundwater flow problems encountered in the design and maintenance of hydraulic structures and tailing dams, in soil mechanics, hydrology, hydrogeology and engineering geology.The stimuli to write this book came from the results obtained in the solution of practical problems connected both with the construction and maintenance of fill-type dams and tailing dams and the utilization of groundwater in Czechoslovakia, and on the other hand from the experience gained in teaching hydraulic structures theory at the Faculty of Civil Engineering of the Technical University of Prague. All the experience so far obtained shows markedly the advantages of the finite element method and the great possibilities of its further development as well as its considerable demands on the algorithmization, programming and use of computer possibilities. The reader will find an explanation of the fundamentals of the finite element method directed mainly toward isoparametric elements having an exceptional adaptability and numerical reliability. The finite element method application to groundwater flow concerns mainly two-dimensional problems, which occur most frequently in practice. Considerable attention is given to non-linear and non-stationary problems, which are most important in application.A computer program (based on the eight-noded isoparametric elements) is included and fully documented.The book will be useful to civil engineers, hydrogeologists and engineering geologists who need the finite element method as a solution tool for the complex problems encountered in engineering practice.

Download or read book Numerical Models in Groundwater Pollution written by Karel Kovarik and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical models are powerful tools used in the prediction of pollutant movement. This book discusses the Finite Element Method (FEM) and Boundary Element Method (BEM), and takes a look at the advantages of these methods in groundwater hydrology. The combination of the BEM and the random-walk particle tracking method is also presented. The book includes computer programs, source code, and examples developed on the basis of the theoretical backgrounds of these methods. These Visual C++ programs are compatible with the Windows platform.

Download or read book A Control Volume Finite Element Method for Three Dimensional NAPL Groundwater Contamination written by University of Waterloo. Dept. of Computer Science and published by . This book was released on 1990 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: "A three dimensional control volume finite element method is developed for NAPL groundwater contamination problems. Tetrahedral elements are formed by decomposing deformed blocks. The decomposition is carried out in such a way as to minimize the size of the negative transmissibilities. Negative transmissibilities produce non- physical discrete fluid flow paths, and can cause oscillatory behaviour in the Newton iteration. Example results are presented for a three dimensional NAPL contamination scenario using typical geophysical data."

Download or read book Groundwater Modeling by the Finite Element Method written by J. D. Istok and published by American Geophysical Union. This book was released on 1989 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Published by the American Geophysical Union as part of the Water Resources Monograph Series, Volume 13. The finite element method is now widely used to solve a variety of important problems in the field of groundwater hydrology. Thus a clear understanding of the method is essential to scientists and engineers working in this field. The goal of this book is to provide the reader with the basic skills needed to use the finite element method to solve "real-world" problems. Examples are used throughout the text to illustrate each step in the solution process.

Download or read book Finite Elements in Water Resources written by J. P. Laible and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the edited proceedings of the Fifth International Conference on Finite Elements in Water Resources, held at the University of Vermont, USA in June 1984. This Conference cont inues the successful series started at Princeton University in 1976, followed by the Conference in Imperial College, London, UK in 1978, the third Conference at the University of Mississippi, USA in 1980 and the fourth at the University of Hannover, Germany in 1982. The objective of this Conference is to provide engineers and scientists interested in water resources with the state-of-t- art on finite element modelling. The Proceedings review the basic theory and applications of the technique in groundwater and seepage, transport phenomena, viscous flow, river, lake and ocean modelling. The fundamentals of the numerical techniques employed in finite elements are also discussed. Many applications illus trate the versatility and generality of the Finite Element Method for the simulation of a wide range of problems in water resources. More recent schemes, in particular, boundary elements, are also presented, together with a series of advanced numerical techniques. The Conference has become an internationally accepted forum for the presentation of new developments of finite elements in water resources techniques. Because of this, a large number of abstracts were submitted to the Organizing Committee and it is our only reg ret that it was impossible to accept all these contributions. The overwhelming response to our Call for Papers has ensured the high quality of these proceedings.

Download or read book A Two dimensional Finite Element Model of Groundwater Contamination written by Il Whan Chung and published by . This book was released on 1979 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Finite Element Simulation in Surface and Subsurface Hydrology written by George F. Pinder and published by Elsevier. This book was released on 2013-09-03 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite Element Simulation in Surface and Subsurface Hydrology provides an introduction to the finite element method and how the method is applied to problems in surface and subsurface hydrology. The book presents the basic concepts of the numerical methods and the finite element approach; applications to problems on groundwater flow and mass and energy transport; and applications to problems that involve surface water dynamics. Computational methods for the solution of differential equations; classification of partial differential equations; finite difference and weighted residual integral techniques; and The Galerkin finite element method are discussed as well. The text will be of value to engineers, hydrologists, and students in the field of engineering.

Download or read book Finite Element Analysis of Groundwater Contamination written by N. Mahomed and published by . This book was released on 1990 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Finite Elements in Water Resources written by K.-P. Holz and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 1095 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings contain the papers presented at the Fourth International Conference on Finite Elements in Water Resources, held in June, 1982, at the University of Hannover, Federal Re public of Germany. This Conference continued the successful series of previous conferences held at Princeton University in 1976, at Imperial College in 1978, and at the University of Mississippi in 1980. Since Finite Elements have proved to be a powerful means for analysing water resource problems, the principal objective of the Conference was to provide an exchange of experiences in practical applications of the finite element method and to establish a forum for discussion regarding accuracy, economy, limitations and improvements. Related discretization methods were included within the scope of the Conference. New develop ments in numerical and computational techniques, basic mathe matical formulations, and soft- and hardware aspects were considered to be equally important topics for an exchange of ideas between both theoretically and practically oriented re searchers. The Conference Organizing Committee is very grateful to the many distinguished scientists who attended the Conference, and for their contributions towards the proceedings. This collection of papers in being made available to a wider audience of en gineers and scientists by CML Publications in Southampton, U.K.

Download or read book Modeling Groundwater Flow and Pollution written by Jacob Bear and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Groundwater constitutes an important component of many water resource systems, supplying water for domestic use, for industry, and for agriculture. Management of a groundwater system, an aquifer, or a system of aquifers, means making such decisions as to the total quantity of water to be withdrawn annually, the location of wells for pumping and for artificial recharge and their rates, and control conditions at aquifer boundaries. Not less important are decisions related to groundwater qUality. In fact, the quantity and quality problems cannot be separated. In many parts of the world, with the increased withdrawal of ground water, often beyond permissible limits, the quality of groundwater has been continuously deteriorating, causing much concern to both suppliers and users. In recent years, in addition to general groundwater quality aspects, public attention has been focused on groundwater contamination by hazardous industrial wastes, by leachate from landfills, by oil spills, and by agricultural activities such as the use of fertilizers, pesticides, and herbicides, and by radioactive waste in repositories located in deep geological formations, to mention some of the most acute contamination sources. In all these cases, management means making decisions to achieve goals without violating specified constraints. In order to enable the planner, or the decision maker, to compare alternative modes of action and to ensure that the constraints are not violated, a tool is needed that will provide information about the response of the system (the aquifer) to various alternatives.

Download or read book Finite Element Modeling of Environmental Problems written by Graham F. Carey and published by . This book was released on 1995-12-04 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of its ability to treat both regions with irregular boundaries and with different material types, the finite element method is increasingly being applied to surface water and soil transport problems and this is the focus of the present volume. The method is ideally suited to simulation of complex real applications for resolving environmental issues and for conducting environmental impact studies. The present volume focuses on the two main areas of environmental modeling with finite elements and the supporting finite element methodology. Five chapters are devoted to ocean and coastal engineering, one to other surface water problems, several to ground water modeling and contaminant transport, including radioactive waste, and the remainder to mathematical models, particularly for mixed finite elements and nonlinear problems. Environmental problems are of increasing topicality and importance today. Special care has been taken in organizing and editing the material to form the right combination of modeling, methodology, and applications studies to form a cohesive treatment appropriate for a graduate course or seminar on the subject. It is aimed in particular at engineers working in computational environmental fluid mechanics and transport processes.

Download or read book Finite Element Methods Applied to Steady State Seepage and Groundwater Flow Problems written by Owunari A. Ogiliye-Carrie and published by . This book was released on 1981 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mathematical Modeling of Groundwater Pollution written by Ne-Zheng Sun and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Groundwater is one of the most important resources in the world. In many areas, water supplies for industrial, domestic, and agricultural uses are de pendent on groundwater. As an "open" system, groundwater may exchange mass and energy with its neighboring systems (soil, air, and surface water) through adsorption, ion-exchange, infiltration, evaporation, inflow, outflow, and other exchange forms. Consequently, both the quantity and quality of groundwater may vary with environmental changes and human activities. Due to population growth, and industrial and agricultural development, more and more groundwater is extracted, especially in arid areas. If the groundwater management problem is not seriously considered, over extraction may lead to groundwater mining, salt water intrusion, and land subsidence. In fact, the quality of groundwater is gradually deteriorating throughout the world. The problem of groundwater pollution has appeared, not only in developed countries, but also in developing countries. Ground water pollution is a serious environmental problem that may damage human health, destroy the ecosystem, and cause water shortage.

Download or read book Assessing Groundwater Vulnerability to Contamination Using Finite Element Modeling and Geographic Information Systems written by Alan Rea and published by . This book was released on 1988 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: A method was developed for assessing the vulnerability of groundwater to contamination from contaminant sources at the soil surface, using a numerical groundwater flow model linked to a digital map database. The method was applied using the pcARC/INFO Geographic Information System (GIS) to input, store, and manipulate base maps, resulting in a database of digital maps for the alluvial aquifer system in the Willamette Valley of western Oregon. Digital elevation maps were created by digitizing topographic maps of land surface (1:250,000 scale), water surface, and the base of the Tertiary-Quaternary sedimentary deposits (1:500,000 scales). Soil association and aquifer unit maps digitized from 1:500,000 scale map sheets were also used. Data were extracted from ARC/INFO to the SURFER software package to create a 3-D surface model for each of the digital elevation maps. An ARC/INFO point coverage was then used to store and overlay these surfaces, allowing the creation of maps of depth to water, saturated thickness, and water table gradient. These data became the input to a numerical finite element groundwater flow model. The model solves a dual formulation problem for the potential function and the stream function to calculate the time-of-travel for water to flow from the surface to the water table and laterally for 100 meters as an index of groundwater vulnerability. A cluster analysis is used to condense the data and form a training data set for a multiple regression model. The regression model is fit to the results of the finite element model with an R-squared of greater than 0.96. The simpler regression model is then used for mapping travel times for the entire study area. When properly calibrated against the finite element model and when combined with the digital map database and Geographic Information System (GIS) procedures described, the regression model can be conveniently used to assess the vulnerability of groundwater to contamination over large areas.

Download or read book A Finite Element Model of Groundwater Contamination at the Lowry Landfill Colorado written by Onofre Gabaldo-Sancho and published by . This book was released on 1983 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis· seminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) *at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac· tivity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 20 (thesis year 1975) a total of 10,374 theses titles from 28 Canadian and 239 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. The organization of Volume 20 is identical to that of past years. It consists of theses titles arranged by discipline and by university within each discipline.