Download or read book Finite Element Analysis of Reinforced Concrete Structures Under Impact Loading written by Hany Labib Riad and published by . This book was released on 1991 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modelling and Analysis of Reinforced Concrete Structures for Dynamic Loading written by Christian Meyer and published by Springer. This book was released on 2014-05-04 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of the material behavior of concrete under dynamic loads, especially impact and impuls, opens the volume. It is followed by a summary of the various analytical tools available to engineers interested in analyzing the nonlinear behavior of reinforced concrete members for dynamic load. These range from relatively simple and practice-oriented push-over analysis to sophisticated layered finite element models. Important design-related topics are discussed, with special emphasis on performance of concrete frames subjected to seismic loads. The significance of modern software systems is recognized by including extensive examples. For readers not current in dynamic analysis methods, an appendix contains a review of the mathematical methods most commonly used for such analysis.
Download or read book Finite Element Design of Concrete Structures written by Guenter Axel Rombach and published by Thomas Telford. This book was released on 2004 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Finite Element Design of Concrete Structures: practical problems and their solutions the author addresses this blind belief in computer results by offering a useful critique that important details are overlooked due to the flood of information from the output of computer calculations. Indeed, errors in the numerical model may lead in extreme cases to structural failures as the collapse of the so-called Sleipner platform has demonstrated.
Download or read book Additional Finite Element Method for Analysis of Reinforced Concrete Structures at Limit States written by Ermakova A.V. and published by Издательство АСВ. This book was released on 2012 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: The work presents the theoretical basis of Additional Finite Element Method (AFEM), which is a variant of the Finite Element Method (FEM) for analysis of reinforced concrete structures at limit state. AFEM adds to the traditional sequence of problem by FEM the units of the two well-known methods of the structural design: method of additional loads and limit state method. The problem is solved by introduction of ideal failure models and additional design diagrams formed from additional finite elements, where each AFE describes the limit state reached by the main element. The main relations defining the properties of AFEs as well as the examples of the use of Additional Finite Element Method for analysis of reinforced concrete structures at limit state are given in the work too.
Download or read book CIGOS 2021 Emerging Technologies and Applications for Green Infrastructure written by Cuong Ha-Minh and published by Springer Nature. This book was released on 2021-10-28 with total page 1861 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the key role of green infrastructure (GI) in providing natural and ecosystem solutions, helping alleviate many of the environmental, social, and economic problems caused by rapid urbanization. The book gathers the emerging technologies and applications in various disciplines involving geotechnics, civil engineering, and structures, which are presented in numerous high-quality papers by worldwide researchers, practitioners, policymakers, and entrepreneurs at the 6th CIGOS event, 2021. Moreover, by sharing knowledge and experiences around emerging GI technologies and policy issues, the book aims at encouraging adoption of GI technologies as well as building capacity for implementing GI practices at all scales. This book is useful for researchers and professionals in designing, building, and managing sustainable buildings and infrastructure.
Download or read book Finite Element Analysis of Reinforced Concrete Structures Under Monotonic Loads written by Hyo-Gyoung Kwak and published by . This book was released on 1990 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Finite Element Analysis of Reinforced Concrete Structures II written by Jeremy Isenberg and published by . This book was released on 1993 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection contains 10 papers discussing finite element analysis of reinforced concrete structures presented at an international workshop held in New York, New York, June 2-5, 1991.
Download or read book Structural Concrete written by M. D. Kotsovos and published by Thomas Telford. This book was released on 1995 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shows the unifying generality of the proposed approach and the reliability of the ensuing computer package, for which the sole input is the specified cylinder strength of concrete and the yield is the stress of steel. This book offers an understanding of structural concrete behaviour, and illustrates the revision required for improving methods.
Download or read book Structures Under Shock and Impact written by P S Bulson and published by Thomas Telford Limited. This book was released on 1992-04-02 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work brings together the experience of specialists in the behaviour of concrete and metal structures, both above and below the ground, to actions of blast, penetration and high speed collisions. From the second international conference, 'Structures under shock and impact', this volume aims to help stimulate future research analysis.
Download or read book Finite Element Modelling of Structural Concrete written by Michael D. Kotsovos and published by CRC Press. This book was released on 2015-05-20 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Powerful Tool for the Analysis and Design of Complex Structural ElementsFinite-Element Modelling of Structural Concrete: Short-Term Static and Dynamic Loading Conditions presents a finite-element model of structural concrete under short-term loading, covering the whole range of short-term loading conditions, from static (monotonic and cyclic) to
Download or read book Concrete Structures Under Impact and Impulsive Loading written by and published by . This book was released on 1983 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Finite Element Analysis of Prestressed Concrete Structures Using Post Tensioning Steel written by Yu Huang and published by Cambridge Scholars Publishing. This book was released on 2020-05-28 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the theory and applications of finite element (FE) modeling of post-tensioned (PT) concrete structures, and provides the updated MATLAB code (as of 2019). The challenge of modeling PT prestressed concrete structures lies in the treatment of the interface between the concrete and prestressing tendons. Using MATLAB, this study develops an innovative nonlinear FE formulation which incorporates contact techniques and engineering elements to considerably reduce the need of computational power. This FE formulation has the ability to simulate different PT frame systems with fully bonded, fully unbonded or partially bonded tendons, as well as actual sliding behavior and frictional effects in the tendons. It also allows for the accurate simulation of anchor seating loss.
Download or read book Finite Element Analysis of Reinforced Concrete Structures 2003 written by Laura N. Lowes and published by . This book was released on 2006 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Practitioners Guide to Finite Element Modelling of Reinforced Concrete Structures written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2008-01-01 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-linear computer analysis methods have seen remarkable advancement in the last half-century. The state-of-the-art in non-linear finite element analysis of reinforced concrete has progressed to the point where such procedures are close to being practical, every-day tools for design office engineers. Non-linear computer analysis procedures can be used to provide reliable assessments of the strength and integrity of damaged or deteriorated structures, or of structures built to previous codes, standards or practices deemed to be deficient today. They can serve as valuable tools in assessing the expected behaviour from retrofitted structures, or in investigating and rationally selecting amongst various repair alternatives. fib Bulletin 45 provides an overview of current concepts and techniques relating to computer-based finite element modelling of structural concrete. It summarises the basic knowledge required for use of nonlinear analysis methods as applied to practical design, construction and maintenance of concrete structures, and attempts to provide a diverse and balanced portrayal of the current technical knowledge, recognizing that there are often competing and conflicting viewpoints. This report does not give advice on picking one model over another but, rather, provides guidance to designers on how to use existing and future models as tools in design practice, in benchmarking of their models against established and reliable test data and in selecting an appropriate safety factor as well as recognising various pitfalls. fib Bulletin 45 is intended for practicing engineers, and therefore focuses more on practical application and less on the subtleties of constitutive modelling.
Download or read book Strengthening of Reinforced Concrete Structures written by L C Hollaway and published by Elsevier. This book was released on 1999-03-05 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: The in situ rehabilitation or upgrading of reinforced concrete members using bonded steel plates is an effective, convenient and economic method of improving structural performance. However, disadvantages inherent in the use of steel have stimulated research into the possibility of using fibre reinforced polymer (FRP) materials in its place, providing a non-corrosive, more versatile strengthening system. This book presents a detailed study of the flexural strengthening of reinforced and prestressed concrete members using fibre reinforces polymer composite plates. It is based to a large extent on material developed or provided by the consortium which studied the technology of plate bonding to upgrade structural units using carbon fibre / polymer composite materials. The research and trial tests were undertaken as part of the ROBUST project, one of several ventures in the UK Government's DTI-LINK Structural Composites Programme. The book has been designed for practising structural and civil engineers seeking to understand the principles and design technology of plate bonding, and for final year undergraduate and postgraduate engineers studying the principles of highway and bridge engineering and structural engineering. Detailed study of the flexural strengthening of reinforced and prestressed concrete members using fibre reinforced polymer composites Contains in-depth case histories
Download or read book Nonlinear Finite Element Analysis of Reinforced Concrete Structures Subjected to Blast Loading written by Fouad Bakheet Aboud Beshara and published by . This book was released on 1991 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Finite Element Analysis of Reinforced Concrete Structures written by Tadaaki Tanabe and published by Aci International. This book was released on 2001 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
