Download or read book Final Environmental Assessment for Air Products and Chemicals Inc Recovery Act Demonstration of CO2 Capture and Sequestration of Steam Methane Reforming Process Gas Used for Large Scale Hydrogen Production DOE EA 1846 written by U. S Department of Energy and published by Createspace Independent Pub. This book was released on 2013-02-12 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: DOE prepared this EA to evaluate the potential environmental consequences of providing a financial assistance grant under the American Recovery and Reinvestment Act of 2009 (Recovery Act) (Recovery Act; Public Law 111-5, 123 Stat. 115) to Air Products and Chemicals, Inc. (Air Products). If Air Products received the funding, the company would demonstrate the capture of carbon dioxide (CO2) from steam methane reformers at Air Products facilities in Port Arthur, Texas; transporting the CO2 via pipeline; and conducting monitoring, verification, and accounting (MVA) related to enhanced oil recovery (EOR) at the West Hastings Field. The CO2 would be sequestered in the Frio formation as part of the EOR activities. Air Products would capture approximately one million short tons of CO2 per year using vacuum swing adsorption. The compressed CO2 would be piped approximately 12.8 miles to the existing Green Pipeline, which would in turn convey the CO2 to the West Hastings Field south of Houston, Texas. Denbury Onshore, LLC. is a subcontractor to Air Products for the use of the Green Pipeline and will share responsibility for conducting the MVA activities. DOE's proposed action would provide approximately $284 million in financial assistance in a cost-sharing arrangement to Air Products. The cost of the proposed project would be approximately $431 million. This EA evaluates the environmental resource areas DOE commonly addresses in its EAs and identifies no significant adverse environmental impacts for the proposed project. The proposed project could result in beneficial impacts to the nation's energy efficiency, through capture of CO2 at existing Air Products facilities within the Valero Port Arthur Refinery, and to the local economy; increase domestic oil production; and could contribute to a minor reduction of greenhouse gases.
Download or read book Negative Emissions Technologies and Reliable Sequestration written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-04-08 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: To achieve goals for climate and economic growth, "negative emissions technologies" (NETs) that remove and sequester carbon dioxide from the air will need to play a significant role in mitigating climate change. Unlike carbon capture and storage technologies that remove carbon dioxide emissions directly from large point sources such as coal power plants, NETs remove carbon dioxide directly from the atmosphere or enhance natural carbon sinks. Storing the carbon dioxide from NETs has the same impact on the atmosphere and climate as simultaneously preventing an equal amount of carbon dioxide from being emitted. Recent analyses found that deploying NETs may be less expensive and less disruptive than reducing some emissions, such as a substantial portion of agricultural and land-use emissions and some transportation emissions. In 2015, the National Academies published Climate Intervention: Carbon Dioxide Removal and Reliable Sequestration, which described and initially assessed NETs and sequestration technologies. This report acknowledged the relative paucity of research on NETs and recommended development of a research agenda that covers all aspects of NETs from fundamental science to full-scale deployment. To address this need, Negative Emissions Technologies and Reliable Sequestration: A Research Agenda assesses the benefits, risks, and "sustainable scale potential" for NETs and sequestration. This report also defines the essential components of a research and development program, including its estimated costs and potential impact.
Download or read book Advances in Carbon Capture written by Mohammad Reza Rahimpour and published by Woodhead Publishing. This book was released on 2020-08-04 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Carbon Capture reviews major implementations of CO2 capture, including absorption, adsorption, permeation and biological techniques. For each approach, key benefits and drawbacks of separation methods and technologies, perspectives on CO2 reuse and conversion, and pathways for future CO2 capture research are explored in depth. The work presents a comprehensive comparison of capture technologies. In addition, the alternatives for CO2 separation from various feeds are investigated based on process economics, flexibility, industrial aspects, purification level and environmental viewpoints. Explores key CO2 separation and compare technologies in terms of provable advantages and limitations Analyzes all critical CO2 capture methods in tandem with related technologies Introduces a panorama of various applications of CO2 capture
Download or read book Carbon Capture written by Jennifer Wilcox and published by Springer Science & Business Media. This book was released on 2012-03-28 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book approaches the energy science sub-field carbon capture with an interdisciplinary discussion based upon fundamental chemical concepts ranging from thermodynamics, combustion, kinetics, mass transfer, material properties, and the relationship between the chemistry and process of carbon capture technologies. Energy science itself is a broad field that spans many disciplines -- policy, mathematics, physical chemistry, chemical engineering, geology, materials science and mineralogy -- and the author has selected the material, as well as end-of-chapter problems and policy discussions, that provide the necessary tools to interested students.
Download or read book Process Intensification written by David Reay and published by Butterworth-Heinemann. This book was released on 2013-06-05 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Intensification: Engineering for Efficiency, Sustainability and Flexibility is the first book to provide a practical working guide to understanding process intensification (PI) and developing successful PI solutions and applications in chemical process, civil, environmental, energy, pharmaceutical, biological, and biochemical systems. Process intensification is a chemical and process design approach that leads to substantially smaller, cleaner, safer, and more energy efficient process technology. It improves process flexibility, product quality, speed to market and inherent safety, with a reduced environmental footprint. This book represents a valuable resource for engineers working with leading-edge process technologies, and those involved research and development of chemical, process, environmental, pharmaceutical, and bioscience systems. No other reference covers both the technology and application of PI, addressing fundamentals, industry applications, and including a development and implementation guide Covers hot and high growth topics, including emission prevention, sustainable design, and pinch analysis World-class authors: Colin Ramshaw pioneered PI at ICI and is widely credited as the father of the technology
Download or read book Biomass Gasification and Pyrolysis written by Prabir Basu and published by Academic Press. This book was released on 2010-07-19 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers comprehensive coverage of the design, analysis, and operational aspects of biomass gasification, the key technology enabling the production of biofuels from all viable sources--some examples being sugar cane and switchgrass. This versatile resource not only explains the basic principles of energy conversion systems, but also provides valuable insight into the design of biomass gasifiers. The author provides many worked out design problems, step-by-step design procedures and real data on commercially operating systems. After fossil fuels, biomass is the most widely used fuel in the world. Biomass resources show a considerable potential in the long term if residues are properly handled and dedicated energy crops are grown. Includes step-by-step design procedures and case studies for Biomass Gasification Provides worked process flow diagrams for gasifier design. Covers integration with other technologies (e.g. gas turbine, engine, fuel cells)
Download or read book Biohydrogen written by Ayhan Demirbas and published by Springer Science & Business Media. This book was released on 2009-06-30 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biohydrogen: For Future Engine Fuel Demands covers the production, purification, storage, pipeline transport, usage, and safety of biohydrogen. Hydrogen promises to be the most significant fuel source of the future, due to its global availability and the fact that water is its only by-product. Biofuels such as bioethanol, biodiesel, bio-oil, and biohydrogen are produced using technologies for thermochemically and biologically converting biomass. Hydrogen fuel production technologies can make use of either non-renewable sources, or renewable sources such as wind, solar, and biorenewable resources. Biohydrogen: For Future Engine Fuel Demands reviews all of the modern biomass-based transportation fuels, including bioethanol, biodiesel, biogas, biohydrogen, and fuel cells. The book also discusses issues of biohydrogen economy, policy and environmental impact. Biohydrogen looks set to be the fuel of choice in the future, replacing both fossil fuels and biorenewable liquid fuels.
Download or read book Global Political Ecology written by Richard Peet and published by Routledge. This book was released on 2010-12-17 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world is caught in the mesh of a series of environmental crises. So far attempts at resolving the deep basis of these have been superficial and disorganized. Global Political Ecology links the political economy of global capitalism with the political ecology of a series of environmental disasters and failed attempts at environmental policies. This critical volume draws together contributions from twenty-five leading intellectuals in the field. It begins with an introductory chapter that introduces the readers to political ecology and summarizes the books main findings. The following seven sections cover topics on the political ecology of war and the disaster state; fuelling capitalism: energy scarcity and abundance; global governance of health, bodies, and genomics; the contradictions of global food; capital’s marginal product: effluents, waste, and garbage; water as a commodity, a human right, and power; the functions and dysfunctions of the global green economy; political ecology of the global climate, and carbon emissions. This book contains accounts of the main currents of thought in each area that bring the topics completely up-to-date. The individual chapters contain a theoretical introduction linking in with the main themes of political ecology, as well as empirical information and case material. Global Political Ecology serves as a valuable reference for students interested in political ecology, environmental justice, and geography.
Download or read book Selective Catalysis for Renewable Feedstocks and Chemicals written by Kenneth M. Nicholas and published by Springer. This book was released on 2014-09-13 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Topics in Current Chemistry presents critical reviews of the present and future trends in modern chemical research. The scope of coverage is all areas of chemical science including the interfaces with related disciplines such as biology, medicine and materials science. The goal of each thematic volume is to give the non-specialist reader, whether in academia or industry, a comprehensive insight into an area where new research is emerging which is of interest to a larger scientific audience. Each review within the volume critically surveys one aspect of that topic and places it within the context of the volume as a whole. The most significant developments of the last 5 to 10 years are presented using selected examples to illustrate the principles discussed. The coverage is not intended to be an exhaustive summary of the field or include large quantities of data, but should rather be conceptual, concentrating on the methodological thinking that will allow the non-specialist reader to understand the information presented. Contributions also offer an outlook on potential future developments in the field.
Download or read book Synthetic Fuels Handbook written by James Speight and published by McGraw Hill Professional. This book was released on 2008-06-22 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Capitalize on the Vast Potential of Alternative Energy Sources Such as Fuel Cells and Biofuels Synthetic Fuels Handbook is a comprehensive guide to the benefits and trade-offs of numerous alternative fuels, presenting expert analyses of the different properties, processes, and performance characteristics of each fuel. It discusses the concept systems and technology involved in the production of fuels on both industrial and individual scales. Written by internationally renowned fuels expert James G. Speight, this vital resource describes the production and properties of fuels from natural gas and natural gas hydrates...tar sand bitumen...coal...oil shale...synthesis gas...crops...wood sources...biomass...industrial and domestic waste...landfill gas...and much more. Using both U.S. and SI units, Synthetic Fuels Handbook features: Information on conventional and nonconventional fuel sources Discussion of the production of alternative fuels on both industrial and individual scales Analyses of properties and uses of gaseous, liquid, and solid fuels from different sources Comparison of properties of alternative fuels with petroleum-based fuels Discover All the Benefits and Trade-Offs of Synthetic Fuels • Fuel sources: conventional and nonconventional • Natural gas and natural gas hydrates • Petroleum and heavy oil • Tar sand bitumen • Coal • Oil shale • Synthesis gas • Crops • Wood sources • Biomass • Industrial and domestic waste • Landfill gas • Comparison of the properties and uses of gaseous fuels from different sources • Comparison of the properties and uses of liquid fuels from different sources • Comparison of the properties and uses of solid fuels from different sources
Download or read book Molten Carbonate Fuel Cells written by Kai Sundmacher and published by John Wiley & Sons. This book was released on 2007-09-24 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adopting a unique, integrated engineering approach, this text simultaneously covers all aspects of design and operation, process analysis, optimization, monitoring and control. It clearly presents the multiple advantages of molten carbonate fuel cells for the efficient conversion of energy, and also includes recent developments in this innovative technology. The whole is rounded off by an appendix featuring benchmark problems with equations and parameters. Vital reading for process, chemical and power engineers, as well as those working in power technology, chemists and electrochemists, materials scientists, and energy-supplying companies.
Download or read book The Third Industrial Revolution written by Jeremy Rifkin and published by Macmillan + ORM. This book was released on 2011-10-04 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Industrial Revolution, powered by oil and other fossil fuels, is spiraling into a dangerous endgame. The price of gas and food are climbing, unemployment remains high, the housing market has tanked, consumer and government debt is soaring, and the recovery is slowing. Facing the prospect of a second collapse of the global economy, humanity is desperate for a sustainable economic game plan to take us into the future. Here, Jeremy Rifkin explores how Internet technology and renewable energy are merging to create a powerful "Third Industrial Revolution." He asks us to imagine hundreds of millions of people producing their own green energy in their homes, offices, and factories, and sharing it with each other in an "energy internet," just like we now create and share information online. Rifkin describes how the five-pillars of the Third Industrial Revolution will create thousands of businesses, millions of jobs, and usher in a fundamental reordering of human relationships, from hierarchical to lateral power, that will impact the way we conduct commerce, govern society, educate our children, and engage in civic life. Rifkin's vision is already gaining traction in the international community. The European Union Parliament has issued a formal declaration calling for its implementation, and other nations in Asia, Africa, and the Americas, are quickly preparing their own initiatives for transitioning into the new economic paradigm. The Third Industrial Revolution is an insider's account of the next great economic era, including a look into the personalities and players — heads of state, global CEOs, social entrepreneurs, and NGOs — who are pioneering its implementation around the world.
Download or read book Encyclopedia of Environmental Science and Engineering Sixth Edition Print Version written by Edward N. Ziegler and published by CRC Press. This book was released on 2012-06-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The authors ... continue the pursuit of new knowledge, calculated to bring new fruits of health, safety, and comfort to man and his environs. The charms, as well as the subtle hazards, of the terms ‘conservation, preservation, and ecology’ need to be crystallized so that the public and their decision-makers practice this complex art with clearer conception and perception than is apparent in recent bitter confrontations." —From the Foreword to the Fourth Edition by Abel Wolman What’s New in This Edition: New entries on environmental and occupational toxicology, geoengineering, and lead abatement Twenty-five significantly updated entries, including expanded discussion of water supplies and waste water treatment, biomass and renewable energy, and international public health issues An expanded list of acronyms and abbreviations Encyclopedia of Environmental Science and Engineering, Sixth Edition is still the most comprehensive, authoritative reference available in the field. This monumental two-volume encyclopedia now includes entries on topics ranging from acid rain, air pollution, and community health to environmental law, instrumentation, modeling, alternative energy, radioactive waste, and water treatment. The broad coverage includes highly specialized topics as well as those that transcend traditional disciplinary boundaries, reflecting the interdisciplinary skills and knowledge required by environmental researchers and engineers. Featuring expert contributors representing industry, academia, and government agencies, the encyclopedia presents fundamental concepts and applications in environmental science and engineering. The entries are supported by extensive figures, photographs, tables, and equations. This sixth edition includes new material on water supplies and wastewater treatment, biomass and renewable energy, and international public health issues. New entries cover environmental and occupational toxicology, geoengineering, and lead abatement. The Encyclopedia of Environmental Science and Engineering provides a view of the field that helps readers understand, manage, and respond to threats to the human environment. Contact us to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367 / (email) [email protected] International: (Tel) +44 (0) 20 7017 6062 / (email) [email protected]
Download or read book Making Healthy Places written by Andrew L. Dannenberg and published by Island Press. This book was released on 2012-09-18 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: The environment that we construct affects both humans and our natural world in myriad ways. There is a pressing need to create healthy places and to reduce the health threats inherent in places already built. However, there has been little awareness of the adverse effects of what we have constructed-or the positive benefits of well designed built environments. This book provides a far-reaching follow-up to the pathbreaking Urban Sprawl and Public Health, published in 2004. That book sparked a range of inquiries into the connections between constructed environments, particularly cities and suburbs, and the health of residents, especially humans. Since then, numerous studies have extended and refined the book's research and reporting. Making Healthy Places offers a fresh and comprehensive look at this vital subject today. There is no other book with the depth, breadth, vision, and accessibility that this book offers. In addition to being of particular interest to undergraduate and graduate students in public health and urban planning, it will be essential reading for public health officials, planners, architects, landscape architects, environmentalists, and all those who care about the design of their communities. Like a well-trained doctor, Making Healthy Places presents a diagnosis of--and offers treatment for--problems related to the built environment. Drawing on the latest scientific evidence, with contributions from experts in a range of fields, it imparts a wealth of practical information, with an emphasis on demonstrated and promising solutions to commonly occurring problems.
Download or read book Transformation and Utilization of Carbon Dioxide written by Bhalchandra M. Bhanage and published by Springer Science & Business Media. This book was released on 2014-01-27 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transformation and Utilization of Carbon Dioxide shows the various organic, polymeric and inorganic compounds which result from the transformation of carbon dioxide through chemical, photocatalytic, electrochemical, inorganic and biological processes. The book consists of twelve chapters demonstrating interesting examples of these reactions, depending on the types of reaction and catalyst. It also includes two chapters dealing with the utilization of carbon dioxide as a reaction promoter and presents a wide range of examples of chemistry and chemical engineering with carbon dioxide. Transformation and Utilization of Carbon Dioxide is a collective work of reviews illustrative of recent advances in the transformation and utilization of carbon dioxide. This book is interesting and useful to a wide readership in the various fields of chemical science and engineering. Bhalchandra Bhanage is a professor of industrial and engineering chemistry at Institute of Chemical Technology, India. Masahiko Arai is a professor of chemical engineering at Hokkaido University, Japan.
Download or read book Modeling Design Construction and Operation of Power Generators with Solid Oxide Fuel Cells written by Jakub Kupecki and published by Springer. This book was released on 2018-12-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book summarizes the current state of the solid oxide fuel cell (SOFC) technology in power generation applications. It describes the single cells, SOFC stacks, micro-combined heat and power systems, large-scale stationary power generators and polygeneration units. The principles of modeling, simulation and controls of power systems with solid oxide fuel cells are presented and discussed. Authors provide theoretical background of the technology followed by the essential insights into the integrated power systems. Selected aspects of the design, construction and operation of power units in range from single kilowatts to hundreds of kilowatts are presented. Finally, the book reports the selected studies on prototype systems which have been constructed in Europe. The book discusses the theoretical and practical aspects of operation of power generators with solid oxide fuel cells including fabrication of cells, design of stacks, system modeling, simulation of stationary and non-stationary operation of systems, fuel preparation and controls.
Download or read book Microbial Biotechnology written by Jayanta Kumar Patra and published by Springer. This book was released on 2018-02-07 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited book, is a collection of 20 articles describing the recent advancements in the application of microbial technology for sustainable development of agriculture and environment. This book covers many aspects like agricultural nanotechnology, promising applications of biofuels production by algae, advancements and application of microbial keratinase, biocontrol agents, plant growth promoting rhizobacteria, bacterial siderophore, use of microbes in detoxifying organophosphate pesticides, bio-surfactants, biofilms, bioremediation degradation of phenol and phenolic compounds and bioprospecting of endophytes. This book intends to bring the latest research advancements and technologies in the area of microbial technology in one platform, providing the readers an up-to-date view on the area. This book would serve as an excellent reference book for researchers and students in the agricultural, environmental and microbiology fields.
