Download or read book Final Disposition of Electric Vehicle Batteries written by Julia Bush and published by SAE International. This book was released on 2022-11-15 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: The battery electric vehicle (EV) industry has experienced considerable growth over the last few years, demonstrating a clear acceleration in adoption and deployment. However, there are still many questions concerning what will happen to batteries as they reach their end of life (EOL), as batteries that have “aged out” can either be reused, recycled, or go to a landfill. Final Disposition of Electric Vehicle Batteries addresses some unsettled issues around lithium-ion battery reuse and recycling. Insufficient investment and regulations are a current barrier to a robust reuse system, and safety concerns potentially hinder adoption. Despite the benefits of battery recycling, there are also many challenges when considering their transportation and disassembly. These challenges will need to be addressed as the industry sees an influx of EV batteries reaching their EOL within the next 10 years. Click here to access the full SAE EDGETM Research Report portfolio. https://doi.org/10.4271/EPR2022026

Download or read book Developing Charging Infrastructure and Technologies for Electric Vehicles written by Alam, Mohammad Saad and published by IGI Global. This book was released on 2021-12-31 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increase in air pollution and vehicular emissions has led to the development of the renewable energy-based generation and electrification of transportation. Further, the electrification shift faces an enormous challenge due to limited driving range, long charging time, and high initial cost of deployment. Firstly, there has been a discussion on renewable energy such as how wind power and solar power can be generated by wind turbines and photovoltaics, respectively, while these are intermittent in nature. The combination of these renewable energy resources with available power generation system will make electric vehicle (EV) charging sustainable and viable after the payback period. Recently, there has also been a significant discussion focused on various EV charging types and the level of power for charging to minimize the charging time. By focusing on both sustainable and renewable energy, as well as charging infrastructures and technologies, the future for EV can be explored. Developing Charging Infrastructure and Technologies for Electric Vehicles reviews and discusses the state of the art in electric vehicle charging technologies, their applications, economic, environmental, and social impact, and integration with renewable energy. This book captures the state of the art in electric vehicle charging infrastructure deployment, their applications, architectures, and relevant technologies. In addition, this book identifies potential research directions and technologies that facilitate insights on EV charging in various charging places such as smart home charging, parking EV charging, and charging stations. This book will be essential for power system architects, mechanics, electrical engineers, practitioners, developers, practitioners, researchers, academicians, and students interested in the problems and solutions to the state-of-the-art status of electric vehicles.

Download or read book Recycling of Lithium Ion Batteries written by Arno Kwade and published by Springer. This book was released on 2017-12-12 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses recycling technologies for many of the valuable and scarce materials from spent lithium-ion batteries. A successful transition to electric mobility will result in large volumes of these. The book discusses engineering issues in the entire process chain from disassembly over mechanical conditioning to chemical treatment. A framework for environmental and economic evaluation is presented and recommendations for researchers as well as for potential operators are derived.

Download or read book The Electric Car written by Michael Hereward Westbrook and published by IET. This book was released on 2001 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considerable work has gone into electric car and battery development in the last ten years, with the prospect of substantial improvements in range and performance in battery cars as well as in hybrids and those using fuel cells. This book covers the development of electric cars, from their early days, to new hybrid models in production. Most of the coverage is focused on the very latest technological issues faced by automotive engineers working on electric cars, as well as the key business factors vital for the successful transfer of electric cars into the mass market.

Download or read book Lithium Process Chemistry written by Alexandre Chagnes and published by Elsevier. This book was released on 2015-06-14 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lithium Process Chemistry: Resources, Extraction, Batteries and Recycling presents, for the first time, the most recent developments and state-of-the-art of lithium production, lithium-ion batteries, and their recycling. The book provides fundamental and theoretical knowledge on hydrometallurgy and electrochemistry in lithium-ion batteries, including terminology related to these two fields. It is of particular interest to electrochemists who usually have no knowledge in hydrometallurgy and hydrometallurgists not familiar with electrochemistry applied to Li-ion batteries. It is also useful for both teachers and students, presenting an overview on Li production, Li-ion battery technologies, and lithium battery recycling processes that is accompanied by numerous graphical presentations of different battery systems and their electrochemical performances. The book represents the first time that hydrometallurgy and electrochemistry on lithium-ion batteries are assembled in one unique source. - Provides fundamental and theoretical knowledge on hydrometallurgy and electrochemistry in lithium-ion batteries - Represents the first time that hydrometallurgy and electrochemistry on lithium-ion batteries are assembled in one unique source. - Ideal for both electrochemists who usually have no knowledge in hydrometallurgy and hydrometallurgists not familiar with electrochemistry applied to Li-ion batteries - Presents recent developments, as well as challenges in lithium production and lithium-ion battery technologies and their recycling - Covers examples of Li processes production with schematics, also including numerous graphical presentations of different battery systems and their electrochemical performances

Download or read book Recycling of Spent Lithium Ion Batteries written by Liang An and published by Springer Nature. This book was released on 2019-10-15 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: ​This book presents a state-of-the-art review of recent advances in the recycling of spent lithium-ion batteries. The topics covered include: introduction to the structure of lithium-ion batteries; development of battery-powered electric vehicles; potential environmental impact of spent lithium-ion batteries; pretreatment of spent lithium-ion batteries for recycling processing; pyrometallurgical processing for recycling spent lithium-ion batteries; hydrometallurgical processing for recycling spent lithium-ion batteries; direct processing for recycling spent lithium-ion batteries; high value-added products from recycling of spent lithium-ion batteries; and effects of recycling of spent lithium-ion batteries on environmental burdens. The book provides an essential reference resource for professors, researchers, and policymakers in academia, industry, and government around the globe.

Download or read book The Handbook of Lithium Ion Battery Pack Design written by John T. Warner and published by Elsevier. This book was released on 2024-05-14 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Lithium-Ion Battery Pack Design: Chemistry, Components, Types and Terminology,?Second Edition provides a clear and concise explanation of EV and Li-ion batteries for readers that are new to the field. The second edition expands and updates all topics covered in the original book, adding more details to all existing chapters and including major updates to align with all of the rapid changes the industry has experienced over the past few years. This handbook offers a layman's explanation of the history of vehicle electrification and battery technology, describing the various terminology and acronyms and explaining how to do simple calculations that can be used in determining basic battery sizing, capacity, voltage, and energy. By the end of this book the reader will have a solid understanding of the terminology around Li-ion batteries and be able to undertake simple battery calculations. The book is immensely useful to beginning and experienced engineers alike who are moving into the battery field. Li-ion batteries are one of the most unique systems in automobiles today in that they combine multiple engineering disciplines, yet most engineering programs focus on only a single engineering field. This book provides the reader with a reference to the history, terminology and design criteria needed to understand the Li-ion battery and to successfully lay out a new battery concept. Whether you are an electrical engineer, a mechanical engineer or a chemist, this book will help you better appreciate the inter-relationships between the various battery engineering fields that are required to understand the battery as an Energy Storage System. It gives great insights for readers ranging from engineers to sales, marketing, management, leadership, investors, and government officials. - Adds a brief history of battery technology and its evolution to current technologies? - Expands and updates the chemistry to include the latest types - Discusses thermal runaway and cascading failure mitigation technologies? - Expands and updates the descriptions of the battery module and pack components and systems?? - Adds description of the manufacturing processes for cells, modules, and packs? - Introduces and discusses new topics such as battery-as-a-service, cell to pack and cell to chassis designs, and wireless BMS?

Download or read book Lithium Ion Batteries written by Gianfranco Pistoia and published by Newnes. This book was released on 2013-12-16 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lithium-Ion Batteries features an in-depth description of different lithium-ion applications, including important features such as safety and reliability. This title acquaints readers with the numerous and often consumer-oriented applications of this widespread battery type. Lithium-Ion Batteries also explores the concepts of nanostructured materials, as well as the importance of battery management systems. This handbook is an invaluable resource for electrochemical engineers and battery and fuel cell experts everywhere, from research institutions and universities to a worldwide array of professional industries. - Contains all applications of consumer and industrial lithium-ion batteries, including reviews, in a single volume - Features contributions from the world's leading industry and research experts - Presents executive summaries of specific case studies - Covers information on basic research and application approaches

Download or read book Advances in Molten Slags Fluxes and Salts written by Ramana Reddy and published by Springer. This book was released on 2017-01-10 with total page 1373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection focuses on ferrous and non-ferrous metallurgy where ionic melts, slags, fluxes, or salts play important roles in industrial growth and economy worldwide. Technical topics included are: thermodynamic properties and phase diagrams and kinetics of slags, fluxes, and salts; physical properties of slags, fluxes, and salts; structural studies of slags; interfacial and process phenomena involving foaming, bubble formation, and drainage; slag recycling, refractory erosion/corrosion, and freeze linings; and recycling and utilization of metallurgical slags and models and their applications in process improvement and optimization. These topics are of interest to not only traditional ferrous and non-ferrous metal industrial processes but also new and upcoming technologies.

Download or read book Handbook on Battery Energy Storage System written by Asian Development Bank and published by Asian Development Bank. This book was released on 2018-12-01 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook serves as a guide to deploying battery energy storage technologies, specifically for distributed energy resources and flexibility resources. Battery energy storage technology is the most promising, rapidly developed technology as it provides higher efficiency and ease of control. With energy transition through decarbonization and decentralization, energy storage plays a significant role to enhance grid efficiency by alleviating volatility from demand and supply. Energy storage also contributes to the grid integration of renewable energy and promotion of microgrid.

Download or read book Mapping of Lithium ion Batteries for Vehicles written by Lisbeth Dahllöf and published by . This book was released on 2019 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: The number of electric vehicles (cars, buses, e-bikes, electric scooters and electric motorcycles) sold in the Nordic countries is currently increasing quickly. That means that more electricity is used for driving, and also that more of some important metals are being used than earlier. This report regards the fate of the lithium-ion batteries used in vehicles in the Nordic countries. Currently the "Battery Directive" (EC, 2006) which is a producer's responsibility directive, is under revision and this study is a knowledge base intended for use by the Nordic Environmental Protection Agencies for their referral response in the revision process. This report focuses on the aspect of metal resources, but it does not elaborate on a broader range of environmental impacts, as these were outside the scope of this study.

Download or read book Racing Toward Zero written by Kelly Senecal and published by SAE International. This book was released on 2021-06-01 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Racing Toward Zero, the authors explore the issues inherent in developing sustainable transportation. They review the types of propulsion systems and vehicle options, discuss low-carbon fuels and alternative energy sources, and examine the role of regulation in curbing emissions. All technologies have an impact on the environment, from internal combustion engine vehicles to battery electric vehicles, fuel cell electric vehicles, and hybrids-there is no silver bullet. The battery electric vehicle may seem the obvious path to a sustainable, carbon-free transportation future, but it's not the only, nor necessarily the best, path forward. The vast majority of vehicles today use the internal combustion engine (ICE), and this is unlikely to change anytime soon. Improving the ICE and its fuels-entering a new ICE age-must be a main route on the road to zero emissions. How do we go green? The future requires a balanced approach to transportation. It's not a matter of choosing between combustion or electrification; it's combustion and electrification. As the authors say, "The future is eclectic." By harnessing the best qualities of both technologies, we will be in the best position to address our transportation future as quickly as possible. (ISBN:9781468601466 ISBN:9781468601473 ISBN:9781468602005 DOI:10.4271/9781468601473)

Download or read book Life Cycle Impact Assessment written by Michael Z. Hauschild and published by Springer. This book was released on 2015-03-24 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a detailed presentation of the principles and practice of life cycle impact assessment. As a volume of the LCA compendium, the book is structured according to the LCIA framework developed by the International Organisation for Standardisation (ISO)passing through the phases of definition or selection of impact categories, category indicators and characterisation models (Classification): calculation of category indicator results (Characterisation); calculating the magnitude of category indicator results relative to reference information (Normalisation); and converting indicator results of different impact categories by using numerical factors based on value-choices (Weighting). Chapter one offers a historical overview of the development of life cycle impact assessment and presents the boundary conditions and the general principles and constraints of characterisation modelling in LCA. The second chapter outlines the considerations underlying the selection of impact categories and the classification or assignment of inventory flows into these categories. Chapters three through thirteen exploreall the impact categories that are commonly included in LCIA, discussing the characteristics of each followed by a review of midpoint and endpoint characterisation methods, metrics, uncertainties and new developments, and a discussion of research needs. Chapter-length treatment is accorded to Climate Change; Stratospheric Ozone Depletion; Human Toxicity; Particulate Matter Formation; Photochemical Ozone Formation; Ecotoxicity; Acidification; Eutrophication; Land Use; Water Use; and Abiotic Resource Use. The final two chapters map out the optional LCIA steps of Normalisation and Weighting.

Download or read book Electric Vehicle Technology Explained written by James Larminie and published by John Wiley & Sons. This book was released on 2012-07-11 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fully updated throughout, Electric Vehicle Technology, Second Edition, is a complete guide to the principles, design and applications of electric vehicle technology. Including all the latest advances, it presents clear and comprehensive coverage of the major aspects of electric vehicle development and offers an engineering-based evaluation of electric motor scooters, cars, buses and trains. This new edition includes: important new chapters on types of electric vehicles, including pickup and linear motors, overall efficiencies and energy consumption, and power generation, particularly for zero carbon emissions expanded chapters updating the latest types of EV, types of batteries, battery technology and other rechargeable devices, fuel cells, hydrogen supply, controllers, EV modeling, ancillary system design, and EV and the environment brand new practical examples and case studies illustrating how electric vehicles can be used to substantially reduce carbon emissions and cut down reliance on fossil fuels futuristic concept models, electric and high-speed trains and developments in magnetic levitation and linear motors an examination of EV efficiencies, energy consumption and sustainable power generation. MATLAB® examples can be found on the companion website www.wiley.com/go/electricvehicle2e Explaining the underpinning science and technology, this book is essential for practicing electrical, automotive, power, control and instrumentation engineers working in EV research and development. It is also a valuable reference for academics and students in automotive, mechanical, power and electrical engineering.

Download or read book ANL CNSV written by and published by . This book was released on 1981 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Lithium Ion Batteries Hazard and Use Assessment written by Celina Mikolajczak and published by Springer Science & Business Media. This book was released on 2012-03-23 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lithium-Ion Batteries Hazard and Use Assessment examines the usage of lithium-ion batteries and cells within consumer, industrial and transportation products, and analyzes the potential hazards associated with their prolonged use. This book also surveys the applicable codes and standards for lithium-ion technology. Lithium-Ion Batteries Hazard and Use Assessment is designed for practitioners as a reference guide for lithium-ion batteries and cells. Researchers working in a related field will also find the book valuable.

Download or read book EcoDesign and Sustainability I written by Yusuke Kishita and published by Springer Nature. This book was released on 2020-11-02 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights cutting-edge ecodesign research, covering product and service design, smart manufacturing, and social perspectives in ecodesign. Featuring selected papers presented at EcoDesign 2019: 11th International Symposium on Environmentally Conscious Design and Inverse Manufacturing, it also includes diverse, interdisciplinary approaches to foster ecodesign research and activities. In the context of Sustainable Development Goals (SDGs), it addresses the need for the manufacturing industry to design innovations for sustainable value creation, taking into account technological developments, legislation, and consumer lifestyles. Further, the book discusses the concept of circular economy, which originated in Europe and aims to increase resource efficiency by shifting away from the linear economy. Focusing on product life cycle design and management, smart manufacturing, circular economy, and business strategies, and providing useful approaches and solutions to these emerging concepts, this book is intended for both researchers and practitioners working in the broad field of ecodesign and sustainability.