Download or read book High Cycle Fatigue written by Theodore Nicholas and published by Elsevier. This book was released on 2006-07-07 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dr Theodore Nicholas ran the High Cycle Fatigue Program for the US Air Force between 1995 and 2003 at Wright-Patterson Air Force Base, and is one of the world's leading authorities on the subject, having authored over 250 papers in leading archival journals and books. Bringing his plethora of expertise to this book, Dr Nicholas discusses the subject of high cycle fatigue (HCF) from an engineering viewpoint in response to a series of HCF failures in the USAF and the concurrent realization that HCF failures in general were taking place universally in both civilian and military engines. Topic covered include: - Constant life diagrams - Fatigue limits under combined LCF and HCF - Notch fatigue under HCF conditions - Foreign object damage (FOD) - Brings years of the Author's US Air Force experience in high cycle fatigue together in one text - Discusses HCF in the context of recent international military and civilian engine failures
Download or read book TMS 2012 141st Annual Meeting and Exhibition Materials Properties Characterization and Modeling written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2012-05-15 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains chapters on cutting-edge developments presented at the TMS annual conference of 2012.
Download or read book Proceedings of the 5th International Conference on Maintenance Condition Monitoring and Diagnostics 2021 written by Esko Juuso and published by Springer Nature. This book was released on 2023-07-18 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains selected papers from the Fifth Conference on Maintenance, Condition Monitoring and Diagnostics, MCMD 2021, in Oulu, Finland, collected by editors with years of experiences in condition monitoring, signal processing, advanced reasoning and diagnostics, maintenance, risk assessment, and asset management. This work maximizes reader insights into the current trends in novel technologies and maintenance trends in industrial domains, energy production and energy conservation, mechatronics and robot technologies. These proceedings discuss key issues and challenges in the operation, maintenance and risk management of complex engineering systems and will serve as a valuable resource for condition monitoring and risk management professionals from industry and science exchange knowledge, experiences and strengthen multidisciplinary network those in the field. This book will be of benefit to academia, and industry alike.
Download or read book Fatigue and Fracture of Traditional and Advanced Structural Alloys written by Filippo Berto and published by MDPI. This book was released on 2021-04-01 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fatigue behavior of traditional and advanced materials is a very relevant topic in different strategic applications impacting and affecting our daily lives. The present Special Issue invites papers to update readers on the state of the art on this important topic. Both review and original manuscripts are welcome. Special attention will be dedicated to innovative materials and innovative manufacturing processes or post-treatments able to improve the fatigue life and reliability of a structural component. Scale effect will be also fully treated focusing on different applications and multiscale approaches aimed at understanding structural integrity under cyclic loadings. This state of the art perspective will help engineers, designers and people from the academy gain an updated view on this very challenging topic which is nowadays very important due to the advances in manufacturing technologies that allow complex new materials to be fabricated.
Download or read book Proceedings of the 5th International Conference on Industrial Engineering ICIE 2019 written by Andrey A. Radionov and published by Springer Nature. This book was released on 2019-11-30 with total page 1257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 5th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia in March 2019. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.
Download or read book Conference Proceedings of the Fifth International Conference on Composite Materials written by William C. Harrigan and published by . This book was released on 1985 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue and Corrosion in Metals written by Pietro Paolo Milella and published by Springer Nature. This book was released on with total page 965 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue of Micro Molded Materials Aluminum Bronze and Yttria Stabilized Zirconia written by Kennerknecht, Tobias and published by KIT Scientific Publishing. This book was released on 2014-12-04 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Custom built setups were developed to investigate micro samples during quasistatic and cyclic testing in tension, compression and bending. Micro molded CuAl10Ni5Fe4-samples showed similar fatigue behavior compared to macroscopic samples due to both the sample size and microstructure being scaled down with the manufacturing process. Results from cyclic three-point bending tests on micro molded 3Y-TZP suggested that a minimum crack extension is necessary to develop cyclically degradable shielding.
Download or read book Fundamentals of Springs Mechanics written by Vladimir Kobelev and published by Springer Nature. This book was released on with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Fifth Pacific Rim International Conference on Advanced Materials and Processing November 2 5 2004 Beijing China written by Z.Y. Zhong and published by . This book was released on 2005 with total page 1006 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 20th International Ship and Offshore Structures Congress ISSC 2018 Volume 3 written by M.L. Kaminski and published by IOS Press. This book was released on 2020-02-21 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Ship and Offshore Structures Congress (ISSC) is a forum for the exchange of information by experts undertaking and applying marine structural research. The aim of the ISSC is to facilitate the evaluation and dissemination of results from recent investigations, to make recommendations for standard design procedures and criteria, to discuss research in progress and planned, to identify areas requiring future research and to encourage international collaboration in furthering these aims. Ships and other marine structures used for transportation, exploration and exploitation of resources in and under the oceans are in the scope of the ISSC. The 20th International Ship and Offshore Structures Congress (ISSC 2018) was held in (Liège) Belgium and Amsterdam (The Netherlands), 9–14 September 2018. The first volume of the proceedings contains the eight Technical Committee reports presented and discussed at the conference and the second volume contains the reports of the eight Specialist Committees. This third volume contains the Official discusser's reports, written discussions and floor discussions, and the replies by the committees.
Download or read book A novel micro mechanical model for prediction of multiaxial high cycle fatigue at small scales written by Eslami, Reza and published by KIT Scientific Publishing. This book was released on 2017-05-03 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: The grain microstructure and damage mechanisms at the grain level are the key factors that influence fatigue of metals at small scales. This is addressed in this work by establishing a new micro-mechanical model for prediction of multiaxial high cycle fatigue (HCF) at a length scale of 5-100?m. The HCF model considers elasto-plastic behavior of metals at the grain level and microstructural parameters, specifically the grain size and the grain orientation.
Download or read book Load Assumption for Fatigue Design of Structures and Components written by Michael Köhler and published by Springer. This book was released on 2017-06-07 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the fatigue behaviour of structural components under variable load amplitude is an essential prerequisite for safe and reliable light-weight design. For designing and dimensioning, the expected stress (load) is compared with the capacity to withstand loads (fatigue strength). In this process, the safety necessary for each particular application must be ensured. A prerequisite for ensuring the required fatigue strength is a reliable load assumption. The authors describe the transformation of the stress- and load-time functions which have been measured under operational conditions to spectra or matrices with the application of counting methods. The aspects which must be considered for ensuring a reliable load assumption for designing and dimensioning are discussed in detail. Furthermore, the theoretical background for estimating the fatigue life of structural components is explained, and the procedures are discussed for numerous applications in practice. One of the prime intentions of the authors is to provide recommendations which can be implemented in practical applications.
Download or read book Proceedings of the 17th International Conference on New Trends in Fatigue and Fracture written by Ricardo R. Ambriz and published by Springer. This book was released on 2017-11-17 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of one of the major conferences in fatigue, fracture and structural integrity (NT2F). The papers are organized and divided in five different themes: fatigue and fracture mechanics of structures and advanced materials; fatigue and fracture in pressure vessels and pipelines: mechanical behavior and structural integrity of welded, bonded and bolted joints; residual stress and environmental effects on the fatigue behavior; and simulation methods, analytical and computation models in fatigue and fracture.
Download or read book Fatigue of Textile Composites written by Valter Carvelli and published by Elsevier. This book was released on 2015-05-16 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue of Textile Composites provides a current, state-of-art review on recent investigations on the fatigue behavior of composite materials, mainly those reinforced with textiles. As this particular group of composite materials is extremely important for a wide variety of industrial applications, including automotive, aeronautical, and marine, etc., mainly due to their peculiarities and advantages with respect to unidirectional laminated composites, the text presents comprehensive information on the huge variety of interlacement geometric architectures that are suitable for a broad range of different applications, their excellent drapability and versatility, which is highly important for complex double-curvature shape components and three-dimensional woven fabrics without plane reinforcement, and their main mechanical characteristics which are currently in high demand from industry. - Presents the current state-of-the-art investigations on fatigue behavior of composite materials, mainly those reinforced with textiles - Contains invaluable information pertaining to a wide variety of industries, including automotive, aeronautical, and marine, amongst others - Provides comprehensive information on the huge variety of interlacement geometric architectures that are suitable for a broad range of different applications
Download or read book Insights and Innovations in Structural Engineering Mechanics and Computation written by Alphose Zingoni and published by CRC Press. This book was released on 2016-11-25 with total page 3395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Insights and Innovations in Structural Engineering, Mechanics and Computation comprises 360 papers that were presented at the Sixth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2016, Cape Town, South Africa, 5-7 September 2016). The papers reflect the broad scope of the SEMC conferences, and cover a wide range of engineering structures (buildings, bridges, towers, roofs, foundations, offshore structures, tunnels, dams, vessels, vehicles and machinery) and engineering materials (steel, aluminium, concrete, masonry, timber, glass, polymers, composites, laminates, smart materials). Some contributions present the latest insights and new understanding on (i) the mechanics of structures and systems (dynamics, vibration, seismic response, instability, buckling, soil-structure interaction), and (ii) the mechanics of materials and fluids (elasticity, plasticity, fluid-structure interaction, flow through porous media, biomechanics, fracture, fatigue, bond, creep, shrinkage). Other contributions report on (iii) recent advances in computational modelling and testing (numerical simulations, finite-element modeling, experimental testing), and (iv) developments and innovations in structural engineering (planning, analysis, design, construction, assembly, maintenance, repair and retrofitting of structures). Insights and Innovations in Structural Engineering, Mechanics and Computation is particularly of interest to civil, structural, mechanical, marine and aerospace engineers. Researchers, developers, practitioners and academics in these disciplines will find the content useful. Short versions of the papers, intended to be concise but self-contained summaries of the full papers, are collected in the book, while the full versions of the papers are on the accompanying CD.
Download or read book Fatigue of Materials at Very High Numbers of Loading Cycles written by Hans-Jürgen Christ and published by Springer. This book was released on 2018-11-19 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents the final reports of the scientific projects funded within the DFG-SPP1466 and, hence, provides the reader with the possibility to familiarize with the leading edge of VHCF research. It draws a balance on the existing knowledge and its enhancement by the joint research action of the priority program. Three different material classes are dealt with: structural metallic materials, long-fiber-reinforced polymers and materials used in micro-electro-mechanical systems. The project topics address the development of suitable experimental techniques for high-frequency testing and damage monitoring, the characterization of damage mechanisms and damage evolution, the development of mechanism-based models and the transfer of the obtained knowledge and understanding into engineering regulations and applications.
