Download or read book Field Validated Utility scale Battery Storage Control Models for Quasi static Analyses written by Aadil Latif and published by . This book was released on 2019 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modelling Control and Stability Analysis of Photovoltaic Systems in Power System Dynamic Studies written by Gustav Lammert and published by kassel university press GmbH. This book was released on 2019 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis investigates the impact of: i) the low voltage ride-through and dynamic voltage support capability; ii) the active current recovery rate; iii) the local voltage control; and iv) the plant-level voltage control of large-scale photovoltaic systems on short-term voltage stability and fault-induced delayed voltage recovery as well as transient and frequency stability. The power system dynamic performance is analysed using state-of-the-art methods, such as phasor mode time-domain simulations and the calculation of the critical clearing time that determines the stability margin. Moreover, the recently developed Kullback-Leibler divergence measure is applied to assess the quality of the voltage recovery. Drawbacks of this metric are outlined and a novel metric, the so-called voltage recovery index, is defined that quantifies the delayed voltage recovery more systematically. The studies are performed with a generic photovoltaic system model and typical model parameters are used that were determined in collaboration with a manufacturer. The stability analysis is performed in DIgSILENT PowerFactory using: i) a one-load infinite-bus system; and ii) an IEEE multi-machine voltage stability test system, namely the Nordic test system. The results show that with the adequate control of photovoltaic systems, power system dynamic performance can be significantly improved.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1989 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Enhancing the Resilience of the Nation s Electricity System written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2017-10-25 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: Americans' safety, productivity, comfort, and convenience depend on the reliable supply of electric power. The electric power system is a complex "cyber-physical" system composed of a network of millions of components spread out across the continent. These components are owned, operated, and regulated by thousands of different entities. Power system operators work hard to assure safe and reliable service, but large outages occasionally happen. Given the nature of the system, there is simply no way that outages can be completely avoided, no matter how much time and money is devoted to such an effort. The system's reliability and resilience can be improved but never made perfect. Thus, system owners, operators, and regulators must prioritize their investments based on potential benefits. Enhancing the Resilience of the Nation's Electricity System focuses on identifying, developing, and implementing strategies to increase the power system's resilience in the face of events that can cause large-area, long-duration outages: blackouts that extend over multiple service areas and last several days or longer. Resilience is not just about lessening the likelihood that these outages will occur. It is also about limiting the scope and impact of outages when they do occur, restoring power rapidly afterwards, and learning from these experiences to better deal with events in the future.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1987 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Power System Dynamics and Stability written by Peter W. Sauer and published by . This book was released on 1998 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a one-semester senior or beginning graduate level course in power system dynamics. This text begins with the fundamental laws for basic devices and systems in a mathematical modeling context. It includes systematic derivations of standard synchronous machine models with their fundamental controls. These individual models are interconnected for system analysis and simulation. Singular perturbation is used to derive and explain reduced-order models.
Download or read book Wind Energy Explained written by James F. Manwell and published by John Wiley & Sons. This book was released on 2010-09-14 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind energy’s bestselling textbook- fully revised. This must-have second edition includes up-to-date data, diagrams, illustrations and thorough new material on: the fundamentals of wind turbine aerodynamics; wind turbine testing and modelling; wind turbine design standards; offshore wind energy; special purpose applications, such as energy storage and fuel production. Fifty additional homework problems and a new appendix on data processing make this comprehensive edition perfect for engineering students. This book offers a complete examination of one of the most promising sources of renewable energy and is a great introduction to this cross-disciplinary field for practising engineers. “provides a wealth of information and is an excellent reference book for people interested in the subject of wind energy.” (IEEE Power & Energy Magazine, November/December 2003) “deserves a place in the library of every university and college where renewable energy is taught.” (The International Journal of Electrical Engineering Education, Vol.41, No.2 April 2004) “a very comprehensive and well-organized treatment of the current status of wind power.” (Choice, Vol. 40, No. 4, December 2002)
Download or read book Handbook of Energy Storage written by Michael Sterner and published by Springer. This book was released on 2019-09-27 with total page 821 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors of this Handbook offer a comprehensive overview of the various aspects of energy storage. After explaining the importance and role of energy storage, they discuss the need for energy storage solutions with regard to providing electrical power, heat and fuel in light of the Energy Transition. The book’s main section presents various storage technologies in detail and weighs their respective advantages and disadvantages. Sections on sample practical applications and the integration of storage solutions across all energy sectors round out the book. A wealth of graphics and examples illustrate the broad field of energy storage, and are also available online. The book is based on the 2nd edition of the very successful German book Energiespeicher. It features a new chapter on legal considerations, new studies on storage needs, addresses Power-to-X for the chemical industry, new Liquid Organic Hydrogen Carriers (LOHC) and potential-energy storage, and highlights the latest cost trends and battery applications. “Finally – a comprehensive book on the Energy Transition that is written in a style accessible to and inspiring for non-experts.” Franz Alt, journalist and book author “I can recommend this outstanding book to anyone who is truly interested in the future of our country. It strikingly shows: it won’t be easy, but we can do it.” Prof. Dr. Harald Lesch, physicist and television host
Download or read book The Common Information Model CIM written by Mathias Uslar and published by Springer Science & Business Media. This book was released on 2012-02-01 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within the Smart Grid, the combination of automation equipment, communication technology and IT is crucial. Interoperability of devices and systems can be seen as the key enabler of smart grids. Therefore, international initiatives have been started in order to identify interoperability core standards for Smart Grids. IEC 62357, the so called Seamless Integration Architecture, is one of these very core standards, which has been identified by recent Smart Grid initiatives and roadmaps to be essential for building and managing intelligent power systems. The Seamless Integration Architecture provides an overview of the interoperability and relations between further standards from IEC TC 57 like the IEC 61970/61968: Common Information Model - CIM. CIM has proven to be a mature standard for interoperability and engineering; consequently, it is a cornerstone of the IEC Smart Grid Standardization Roadmap. This book provides an overview on how the CIM developed, in which international projects and roadmaps is has already been covered and describes the basic use cases for CIM. This book has been written for both Power Engineers trying to get to know the EMS and business IT part of Smart Grid and for Computer Scientist finding out where ICT technology is applied in EMS and DMS Systems. The book is divided into two parts dealing with the theoretical foundations and a practical part describing tools and use cases for CIM.
Download or read book Vehicle Propulsion Systems written by Lino Guzzella and published by Springer Science & Business Media. This book was released on 2007-09-21 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors of this text have written a comprehensive introduction to the modeling and optimization problems encountered when designing new propulsion systems for passenger cars. It is intended for persons interested in the analysis and optimization of vehicle propulsion systems. Its focus is on the control-oriented mathematical description of the physical processes and on the model-based optimization of the system structure and of the supervisory control algorithms.
Download or read book Advancements in Real Time Simulation of Power and Energy Systems written by Panos Kotsampopoulos and published by MDPI. This book was released on 2021-05-20 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern power and energy systems are characterized by the wide integration of distributed generation, storage and electric vehicles, adoption of ICT solutions, and interconnection of different energy carriers and consumer engagement, posing new challenges and creating new opportunities. Advanced testing and validation methods are needed to efficiently validate power equipment and controls in the contemporary complex environment and support the transition to a cleaner and sustainable energy system. Real-time hardware-in-the-loop (HIL) simulation has proven to be an effective method for validating and de-risking power system equipment in highly realistic, flexible, and repeatable conditions. Controller hardware-in-the-loop (CHIL) and power hardware-in-the-loop (PHIL) are the two main HIL simulation methods used in industry and academia that contribute to system-level testing enhancement by exploiting the flexibility of digital simulations in testing actual controllers and power equipment. This book addresses recent advances in real-time HIL simulation in several domains (also in new and promising areas), including technique improvements to promote its wider use. It is composed of 14 papers dealing with advances in HIL testing of power electronic converters, power system protection, modeling for real-time digital simulation, co-simulation, geographically distributed HIL, and multiphysics HIL, among other topics.
Download or read book Best Practices Handbook for the Collection and Use of Solar Resource Data for Solar Energy Applications written by M. Sengupta and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1998 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Storage Devices written by M. Taha Demirkan and published by BoD – Books on Demand. This book was released on 2019-12-18 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy storage will be a very important part of the near future, and its effectiveness will be crucial for most future technologies. Energy can be stored in several different ways and these differ in terms of the type and the conversion method of the energy. Among those methods; chemical, mechanical, and thermal energy storage are some of the most favorable methods for containing energy. Current energy storage devices are still far from meeting the demands of new technological developments. Therefore, much effort has been put to improving the performance of different types of energy storage technologies in the last few decades.
Download or read book Battery Management Systems written by Valer Pop and published by Springer Science & Business Media. This book was released on 2008-05-28 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the field of State-of-Charge (SoC) indication for rechargeable batteries. An overview of the state-of-the-art of SoC indication methods including available market solutions from leading semiconductor companies is provided. All disciplines are covered, from electrical, chemical, mathematical and measurement engineering to understanding battery behavior. This book will therefore is for persons in engineering and involved in battery management.
Download or read book Silicon Heterojunction Solar Cells written by W.R. Fahrner and published by Trans Tech Publications Ltd. This book was released on 2006-08-15 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world of today must face up to two contradictory energy problems: on the one hand, there is the sharply growing consumer demand in countries such as China and India. On the other hand, natural resources are dwindling. Moreover, many of those countries which still possess substantial gas and oil supplies are politically unstable. As a result, renewable natural energy sources have received great attention. Among these, solar-cell technology is one of the most promising candidates. However, there still remains the problem of the manufacturing costs of such cells. Many attempts have been made to reduce the production costs of conventional solar cells (manufactured from monocrystalline silicon using diffusion methods) by instead using cheaper grades of silicon, and simpler pn-junction fabrication. That is the hero of this book; the heterojunction solar cell.
Download or read book Pyomo Optimization Modeling in Python written by William E. Hart and published by Springer Science & Business Media. This book was released on 2012-02-15 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a complete and comprehensive reference/guide to Pyomo (Python Optimization Modeling Objects) for both beginning and advanced modelers, including students at the undergraduate and graduate levels, academic researchers, and practitioners. The text illustrates the breadth of the modeling and analysis capabilities that are supported by the software and support of complex real-world applications. Pyomo is an open source software package for formulating and solving large-scale optimization and operations research problems. The text begins with a tutorial on simple linear and integer programming models. A detailed reference of Pyomo's modeling components is illustrated with extensive examples, including a discussion of how to load data from data sources like spreadsheets and databases. Chapters describing advanced modeling capabilities for nonlinear and stochastic optimization are also included. The Pyomo software provides familiar modeling features within Python, a powerful dynamic programming language that has a very clear, readable syntax and intuitive object orientation. Pyomo includes Python classes for defining sparse sets, parameters, and variables, which can be used to formulate algebraic expressions that define objectives and constraints. Moreover, Pyomo can be used from a command-line interface and within Python's interactive command environment, which makes it easy to create Pyomo models, apply a variety of optimizers, and examine solutions. The software supports a different modeling approach than commercial AML (Algebraic Modeling Languages) tools, and is designed for flexibility, extensibility, portability, and maintainability but also maintains the central ideas in modern AMLs.
