Download or read book Field Testing of Integral Abutments written by R. Abendroth and published by . This book was released on 1998 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integral abutment bridges are constructed without an expansion joint in the superstructure of the bridge; therefore, the bridge girders, deck, abutment diaphragms, and abutments are monolithically constructed. The abutment piles in an integral abutment bridge are vertically orientated, and they are embedded into the pile cap. When this type of a bridge experiences thermal expansion or contraction, horizontal displacements are induced at the top of the abutment piles. The flexibility of the abutment piles eliminates the need to provide an expansion joint at the inside face to the abutments: Integral abutment bridge construction has been used in Iowa and other states for many years. This research is evaluating the performance of integral abutment bridges by investigating thermally induced displacements, strains, and temperatures in two Iowa bridges. Each bridge has a skewed alignment, contains five prestressed concrete girders that support a 30-ft wide roadway for three spans, and involves a water crossing. The bridges will be monitored for about two years.
Download or read book Field Testing of Integral Abutments written by Robert E. Abendroth and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The objectives of this research program were to evaluate the state-of-art for the design of prestressed-concrete (PC), integralabutment bridges; to validate the assumptions that are incorporated in the current-design procedures for these types of bridges when they are subjected to thermal-loading conditions; and, as appropriate, to revise and improve the current-design procedures for this type of a bridge, as that design relates to the thermally-induced displacements of the abutments and the thermally-induced forces in the abutments and abutment piles. Two, skewed, PC girder, integral-abutment bridges in the State of Iowa were instrumented over a two-year period to measure structural behavior. Longitudinal and transverse displacements and rotation of the integral abutments, strains in the steel piles and in the PC girders, and temperature distributions were recorded throughout the monitoring period for both bridges. The coefficient of thermal expansion and contraction for the concrete in core specimens that were taken from 20 bridge decks and from several PC girders was experimentally measured at the 100%-dry and 100%-saturated conditions. The longitudinal displacements of the integral abutments correlated well with the recorded change in the bridge temperature. Total, longitudinal, pile strains exceeded the minimum, specified, yield strain of the steel for both bridges. Longitudinal strains in the PC girders were well within acceptable limits. The experimental data were used to calibrate and refine finite-element models of both bridges. Discrepancies were not fully explained for the differences between the predicted and measured, thermal expansion of the bridge and vertical rotations of the integral abutments.
Download or read book Instrumentation and Field Testing Procedures for Testing Integral Abutments on Prestressed Concrete Piles written by Brian Keith Calloway and published by . This book was released on 2001 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Long Term Behavior of Integral Abutment Bridges written by Robert J. Frosch and published by Joint Transportation Research Program. This book was released on 2011-08-15 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integral abutment (IA) construction has become the preferred method over conventional construction for use with typical highway bridges. However, the use of these structures is limited due to state mandated length and skew limitations. To expand their applicability, studies were implemented to define limitations supported by rational analysis rather than simply engineering judgment. Previous research investigations have resulted in larger length limits and an overall better understanding of these structures. However, questions still remain regarding IA behavior; specifically questions regarding long-term behavior and effects of skew. To better define the behavior of these structures, a study was implemented to specifically investigate the long term behavior of IA bridges. First, a field monitoring program was implemented to observe and understand the in-service behavior of three integral abutment bridges. The results of the field investigation were used to develop and calibrate analytical models that adequately capture the long-term behavior. Second, a single-span, quarter-scale integral abutment bridge was constructed and tested to provide insight on the behavior of highly skewed structures. From the acquired knowledge from both the field and laboratory investigations, a parametric analysis was conducted to characterize the effects of a broad range of parameters on the behavior of integral abutment bridges. This study develops an improved understanding of the overall behavior of IA bridges. Based on the results of this study, modified length and skew limitations for integral abutment bridge are proposed. In addition, modeling recommendations and guidelines have been developed to aid designers and facilitate the increased use of integral abutment bridges.
Download or read book Development of Field Testing Procedures to Determine the Behavior of Steel Piles Supporting Integral Abutments written by Anthony Francis Zeind and published by . This book was released on 1997 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Testing of Integral Abutments written by James Joseph Lewis and published by . This book was released on 1999 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Integral Abutment Bridge with Precast Concrete Piles written by Robert Emil Abendroth and published by . This book was released on 2007 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents the details of the first integral abutment bridge in the state of Iowa that utilized precast, prestressed concrete piles in the abutment. The bridge, which was constructed in Tama County in 2000, consists of a 110 ft. long, 30 ft. wide, single-span PC girder superstructure with a left-side-ahead 20 degree skew angle. The bridge was instrumented with a variety of strain gages, displacement sensors, and thermocouples to monitor and help in the assessment of structural behavior. The results of this monitoring are presented, and recommendations are made for future application of precast, prestressed concrete piles in integral abutment bridges.
Download or read book Instrumentation and Monitoring of Integral Bridge Abutment to approach Slab Connection written by and published by . This book was released on 2008 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Iowa Department of Transportation has long recognized that approach slab pavements of integral abutment bridges are prone to settlement and cracking, which manifests as the "bump at the end of the bridge". A commonly recommended solution is to integrally attach the approach slab to the bridge abutment. Two different approach slabs, one being precast concrete and the other being cast-in-place concrete, were integrally connected to side-by-side bridges and investigated. The primary objective of this investigation was to evaluate the approach slab performance and the impacts the approach slabs have on the bridge. To satisfy the research needs, the project scope involved a literature review, survey of Midwest Department of Transportation current practices, implementing a health monitoring system on the bridge and approach slab, interpreting the data obtained during the evaluation, and conducting periodic visual inspections. Based on the information obtained from the testing the following general conclusions were made: The integral connection between the approach slabs and the bridges appear to function well with no observed distress at this location and no relative longitudinal movement measured between the two components; Tying the approach slab to the bridge appears to impact the bridge; The two different approach slabs, the longer precast slab and the shorter cast-in-place slab, appear to impact the bridge differently; The measured strains in the approach slabs indicate a force exists at the expansion joint and should be taken into consideration when designing both the approach slab and the bridge; The observed responses generally followed an annual cyclic and/or short term cyclic pattern over time.
Download or read book Advances in Analysis and Design of Deep Foundations written by Murad Abu-Farsakh and published by Springer. This book was released on 2017-07-11 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume on “Advances in Analysis and Design of Deep Foundations” contains 22 technical papers which cover various aspects of analysis and design of deep foundations based on full-scale field testing, numerical modeling, and analytical solutions. The technical papers are 8-10 pages long that present the results and findings from research as well as practical-oriented studies on deep foundations that are of interest to civil/geotechnical engineering community. The topics cover a wide spectrum of applications that include evaluation of the axial and lateral capacity of piles, pile group effects, evaluation of the increase in pile capacity with time (or pile setup), influence of excavation on pile capacity, study the behavior of pile raft caisson foundations, evaluate the bearing capacity and settlement of piles from cone penetration tests, etc. This volume is part of the proceedings of the 1st GeoMEast International Congress and Exhibition on Sustainable Civil Infrastructures, Egypt 2017.
Download or read book Behavior of Integral Abutment Bridges written by Christine Bonczar and published by . This book was released on 2005 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This project investigated the seasonal behavior of integral abutment bridges through field monitoring and finite element modeling (FEM). The Orange-Wendell Bridge was used as a case study for the project. The structure was instrumented with 85 gages measuring bridge movements and forces (temperature gages, joint meters, tilt meters, strain gages, earth pressure cells, thermistors and four inclinometer casings for manual readings). Instruments were monitored by the University of Massachusetts at Amherst from January 2002 through December 2004. Both 2-D and 3-D FEM of the bridge were developed using GTSTRUDL and calibrated to the field data. Parametric FEM was performed to evaluate the influence of soil properties and construction practices on bridge behavior.
Download or read book Evaluation of Integral Abutments written by and published by . This book was released on 2006 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Maintenance Safety Risk Management and Life Cycle Performance of Bridges written by Nigel Powers and published by CRC Press. This book was released on 2018-07-04 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges contains lectures and papers presented at the Ninth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2018), held in Melbourne, Australia, 9-13 July 2018. This volume consists of a book of extended abstracts and a USB card containing the full papers of 393 contributions presented at IABMAS 2018, including the T.Y. Lin Lecture, 10 Keynote Lectures, and 382 technical papers from 40 countries. The contributions presented at IABMAS 2018 deal with the state of the art as well as emerging concepts and innovative applications related to the main aspects of bridge maintenance, safety, risk, management and life-cycle performance. Major topics include: new design methods, bridge codes, heavy vehicle and load models, bridge management systems, prediction of future traffic models, service life prediction, residual service life, sustainability and life-cycle assessments, maintenance strategies, bridge diagnostics, health monitoring, non-destructive testing, field testing, safety and serviceability, assessment and evaluation, damage identification, deterioration modelling, repair and retrofitting strategies, bridge reliability, fatigue and corrosion, extreme loads, advanced experimental simulations, and advanced computer simulations, among others. This volume provides both an up-to-date overview of the field of bridge engineering and significant contributions to the process of more rational decision-making on bridge maintenance, safety, risk, management and life-cycle performance of bridges for the purpose of enhancing the welfare of society. The Editors hope that these Proceedings will serve as a valuable reference to all concerned with bridge structure and infrastructure systems, including students, researchers and engineers from all areas of bridge engineering.
Download or read book Bridge Maintenance Safety Management Life Cycle Sustainability and Innovations written by Hiroshi Yokota and published by CRC Press. This book was released on 2021-04-20 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridge Maintenance, Safety, Management, Life-Cycle Sustainability and Innovations contains lectures and papers presented at the Tenth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2020), held in Sapporo, Hokkaido, Japan, April 11–15, 2021. This volume consists of a book of extended abstracts and a USB card containing the full papers of 571 contributions presented at IABMAS 2020, including the T.Y. Lin Lecture, 9 Keynote Lectures, and 561 technical papers from 40 countries. The contributions presented at IABMAS 2020 deal with the state of the art as well as emerging concepts and innovative applications related to the main aspects of maintenance, safety, management, life-cycle sustainability and technological innovations of bridges. Major topics include: advanced bridge design, construction and maintenance approaches, safety, reliability and risk evaluation, life-cycle management, life-cycle sustainability, standardization, analytical models, bridge management systems, service life prediction, maintenance and management strategies, structural health monitoring, non-destructive testing and field testing, safety, resilience, robustness and redundancy, durability enhancement, repair and rehabilitation, fatigue and corrosion, extreme loads, and application of information and computer technology and artificial intelligence for bridges, among others. This volume provides both an up-to-date overview of the field of bridge engineering and significant contributions to the process of making more rational decisions on maintenance, safety, management, life-cycle sustainability and technological innovations of bridges for the purpose of enhancing the welfare of society. The Editors hope that these Proceedings will serve as a valuable reference to all concerned with bridge structure and infrastructure systems, including engineers, researchers, academics and students from all areas of bridge engineering.
Download or read book Behavior of Pile supported Integral Abutments at Bridge Sites with Shallow Bedrock written by John G. DeLano and published by . This book was released on 2005 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Maine, there are often cases where the depth to bedrock prohibits integral abutments bridges from being used. The goal of this research is to determine the feasibility of constructing integral abutments in conditions that cannot provide the fixed support conditions that are traditionally assumed. A finite element model was created that incorporates realistic constitutive and surface interaction models.
Download or read book Design of Structures 2004 written by National Research Council (U.S.). Transportation Research Board and published by . This book was released on 2004 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integral Bridges written by George L. England and published by Thomas Telford. This book was released on 2000 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work was commissioned by the Highways Agency to produce guidance for bridge designers by addressing the thermally induced soil/structure integration problem created by environmental changes of temperature and the associated cyclical displacements imposed on the granular backfill to the bridge abutments. It develops a better theoretical understanding of the cyclic performance, in particular the strain racheting in the backfill soil when in contact with a stiff structure. It also identifies the governing soil parameters and examines their influence in the interaction problem, develops numerical modelling procedures to predict interactive soil behaviour, and identifies and quantifies the controlling features of bridge structures relevant to the interaction problem.
Download or read book Behavior of Concrete Integral Abutment Bridges written by Jimin Huang and published by . This book was released on 2004 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt:
