Download or read book Field Test of High Efficiency Residential Buildings with Ground source and Air source Heat Pump Systems written by and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper describes the field performance of space conditioning and water heating equipment in four single-family residential structures with advanced thermal envelopes. Each structure features a different, advanced thermal envelope design: structural insulated panel (SIP); optimum value framing (OVF); insulation with embedded phase change materials (PCM) for thermal storage; and exterior insulation finish system (EIFS). Three of the homes feature ground-source heat pumps (GSHPs) for space conditioning and water heating while the fourth has a two-capacity air-source heat pump (ASHP) and a heat pump water heater (HPWH). Two of the GCHP-equipped homes feature horizontal ground heat exchange (GHX) loops that utillize the existing foundation and utility service trenches while the third features a vertical borehole with vertical u-tube GHX. All of the houses were operated under the same simulated occupancy conditions. Operational data on the house HVAC/Water heating (WH) systems are presented and factors influencing overall performance are summarized.
Download or read book Geothermal Heating and Cooling written by Stephen P. Kavanaugh and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geothermal Heating and Cooling is a complete revision of Ground-Source Heat Pumps: Design of Geothermal Systems for Commercial and Institutional Buildings, which is recognized as the primary reference for nonresidential ground-source heat pump (GSHP) installations. This new work takes advantage of the many lessons learned since the time of the original publication, when GSHPs were primarily residential applications. Many improvements have evolved, and performance data, both positive and negative, is now available to guide the development of best practices. This essential guide for HVAC design engineers, design-build contractors, GSHP subcontractors, and energy/construction managers also provides building owners and architects with insights into characteristics of quality engineering firms and the information that should be provided by design firms competing for GSHP projects.This revision draws on new ASHRAE and industry research in critical areas, as well as measured data from long-term installations and optimized installation practices used by high-production GSHP contractors. Nearly all chapters and appendices were completely rewritten, and they include coverage of closed-loop ground (ground-coupled), groundwater, and surface-water systems plus GSHP equipment and piping. Additional information on site characterization has been added, including a new hydrogeological chapter. Another new chapter contains results of recent field studies, energy and demand characteristics, and updated information to optimize GSHP system cost. While other publications deal primarily with ground-coupled heat pumps, this text includes detailed coverage of groundwater, surface-water, and GSHP costs.Tables, graphs, and equations are provided in both Inch-Pound (I-P) and International System (SI) units. As a bonus, supplemental Microsoft® Excel® macro-enabled spreadsheets for a variety of GSHP calculations accompany the text.
Download or read book Energy Abstracts for Policy Analysis written by and published by . This book was released on 1989 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1983 with total page 1368 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Ground Source Heat Pump Systems written by Simon Rees and published by Woodhead Publishing. This book was released on 2016-05-13 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Ground-Source Heat Pump Systems relates the latest information on source heat pumps (GSHPs), the types of heating and/or cooling systems that transfer heat from, or to, the ground, or, less commonly, a body of water. As one of the fastest growing renewable energy technologies, they are amongst the most energy efficient systems for space heating, cooling, and hot water production, with significant potential for a reduction in building carbon emissions. The book provides an authoritative overview of developments in closed loop GSHP systems, surface water, open loop systems, and related thermal energy storage systems, addressing the different technologies and component methods of analysis and optimization, among other subjects. Chapters on building integration and hybrid systems complete the volume. - Provides the geological aspects and building integration covered together in one convenient volume - Includes chapters on hybrid systems - Presents carefully selected chapters that cover areas in which there is significant ongoing research - Addresses geothermal heat pumps in both heating and cooling modes
Download or read book Design and Installation of Ground Source Heat Pump Systems for Commercial and Residential Buildings written by and published by . This book was released on 2016 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optimization of Energy Systems written by Ibrahim Din¿er and published by John Wiley & Sons. This book was released on 2017-05-15 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential resource for optimizing energy systems to enhance design capability, performance and sustainability Optimization of Energy Systems comprehensively describes the thermodynamic modelling, analysis and optimization of numerous types of energy systems in various applications. It provides a new understanding of the system and the process of defining proper objective functions for determination of the most suitable design parameters for achieving enhanced efficiency, cost effectiveness and sustainability. Beginning with a general summary of thermodynamics, optimization techniques and optimization methods for thermal components, the book goes on to describe how to determine the most appropriate design parameters for more complex energy systems using various optimization methods. The results of each chapter provide potential tools for design, analysis, performance improvement, and greenhouse gas emissions reduction. Key features: Comprehensive coverage of the modelling, analysis and optimization of many energy systems for a variety of applications. Examples, practical applications and case studies to put theory into practice. Study problems at the end of each chapter that foster critical thinking and skill development. Written in an easy-to-follow style, starting with simple systems and moving to advanced energy systems and their complexities. A unique resource for understanding cutting-edge research in the thermodynamic analysis and optimization of a wide range of energy systems, Optimization of Energy Systems is suitable for graduate and senior undergraduate students, researchers, engineers, practitioners, and scientists in the area of energy systems.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-03 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 11th International Symposium on Heating Ventilation and Air Conditioning ISHVAC 2019 written by Zhaojun Wang and published by Springer Nature. This book was released on 2020-03-19 with total page 931 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the 11th International Symposium on Heating, Ventilation and Air Conditioning (ISHVAC 2019), with a focus on HVAC techniques for improving indoor environment quality and the energy efficiency of heating and cooling systems. Presenting inspiration for implementing more efficient and safer HVAC systems, the book is a valuable resource for academic researchers, engineers in industry, and government regulators.
Download or read book Building Technology Publications written by Center for Building Technology and published by . This book was released on 1982 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NBS Special Publication written by and published by . This book was released on 1982 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Progress in Exergy Energy and the Environment written by Ibrahim Dincer and published by Springer. This book was released on 2014-06-17 with total page 1055 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thorough and highly relevant volume examines exergy, energy and the environment in the context of energy systems and applications and as a potential tool for design, analysis, optimization. It further considers their role in minimizing and/or eliminating environmental impacts and providing for sustainable development. In this regard, several key topics ranging from the basics of the thermodynamic concepts to advanced exergy analysis techniques in a wide range of applications are covered.
Download or read book Energy a Continuing Bibliography with Indexes written by and published by . This book was released on 1980 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Building Industry Technology written by and published by . This book was released on 1990 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Sustainable Technologies written by Martin Abraham and published by Elsevier. This book was released on 2017-07-04 with total page 2276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encyclopedia of Sustainable Technologies, Eight Volume Set provides an authoritative assessment of the sustainable technologies that are currently available or in development. Sustainable technology includes the scientific understanding, development and application of a wide range of technologies and processes and their environmental implications. Systems and lifecycle analyses of energy systems, environmental management, agriculture, manufacturing and digital technologies provide a comprehensive method for understanding the full sustainability of processes. In addition, the development of clean processes through green chemistry and engineering techniques are also described. The book is the first multi-volume reference work to employ both Life Cycle Analysis (LCA) and Triple Bottom Line (TBL) approaches to assessing the wide range of technologies available and their impact upon the world. Both approaches are long established and widely recognized, playing a key role in the organizing principles of this valuable work. Provides readers with a one-stop guide to the most current research in the field Presents a grounding of the fundamentals of the field of sustainable technologies Written by international leaders in the field, offering comprehensive coverage of the field and a consistent, high-quality scientific standard Includes the Life Cycle Analysis and Triple Bottom Line approaches to help users understand and assess sustainable technologies
Download or read book Green Building Materials and Civil Engineering written by Jimmy C.M. Kao and published by CRC Press. This book was released on 2014-10-21 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains select green building, materials, and civil engineering papers from the 4th International Conference on Green Building, Materials and Civil Engineering (GBMCE), which was held in Hong Kong, August 21-22, 2014. This volume of proceedings aims to provide a platform for researchers, engineers, academics, and industry professionals f
