Download or read book Field Rotor Aerodynamics the Rotating Case written by and published by . This book was released on 1996 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Field Rotor Aerodynamics written by A. J. Brand and published by . This book was released on 1994 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rotor body Aerodynamic Interactions written by Mark D. Betzina and published by . This book was released on 1983 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wind-tunnel investigation was conducted in which independent, steady-state aerodynamic forces and moments were measured on a 2.24-m-diam, two- bladed helicopter rotor and on several different bodies. The objective was to determine the mutual interaction effects for variations in velocity, thrust, tip-path-plane angle of attack, body angle of attack, rotor/body position, and body geometry. the results of the investigation show that the body longitudinal aerodynamic characteristics are significantly affected by the presence of a rotor and hub, and that the hub interference may be a major part of such interaction. This report presents the effects of various parameters on the interactions and discusses the difficulties encountered in determining the effect of the body on the rotor performance.
Download or read book Rotary Wing Aerodynamics written by W. Z. Stepniewski and published by Courier Corporation. This book was released on 2013-04-22 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: DIVClear, concise text covers aerodynamic phenomena of the rotor and offers guidelines for helicopter performance evaluation. Originally prepared for NASA. Prefaces. New Indexes. 10 black-and-white photos. 537 figures. /div
Download or read book Field Rotor Aerodynamics with Vortex Generators written by M. Späth and published by . This book was released on 1994 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wind Turbine Aerodynamics and Vorticity Based Methods written by Emmanuel Branlard and published by Springer. This book was released on 2017-04-05 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book introduces the fundamentals of fluid-mechanics, momentum theories, vortex theories and vortex methods necessary for the study of rotors aerodynamics and wind-turbines aerodynamics in particular. Rotor theories are presented in a great level of details at the beginning of the book. These theories include: the blade element theory, the Kutta-Joukowski theory, the momentum theory and the blade element momentum method. A part of the book is dedicated to the description and implementation of vortex methods. The remaining of the book focuses on the study of wind turbine aerodynamics using vortex-theory analyses or vortex-methods. Examples of vortex-theory applications are: optimal rotor design, tip-loss corrections, yaw-models and dynamic inflow models. Historical derivations and recent extensions of the models are presented. The cylindrical vortex model is another example of a simple analytical vortex model presented in this book. This model leads to the development of different BEM models and it is also used to provide the analytical velocity field upstream of a turbine or a wind farm under aligned or yawed conditions. Different applications of numerical vortex methods are presented. Numerical methods are used for instance to investigate the influence of a wind turbine on the incoming turbulence. Sheared inflows and aero-elastic simulations are investigated using vortex methods for the first time. Many analytical flows are derived in details: vortex rings, vortex cylinders, Hill's vortex, vortex blobs etc. They are used throughout the book to devise simple rotor models or to validate the implementation of numerical methods. Several Matlab programs are provided to ease some of the most complex implementations.
Download or read book Rotary wing Aerodynamics written by Wieslaw Zenon Stepniewski and published by Courier Corporation. This book was released on 1984 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent literature related to rotary-wing aerodynamics has increased geometrically; yet, the field has long been without the benefit of a solid, practical basic text. To fill that void in technical data, NASA (National Aeronautics and Space Administration) commissioned the highly respected practicing engineers and authors W. Z. Stepniewski and C. N. Keys to write one. The result: Rotary-Wing Aerodynamics, a clear, concise introduction, highly recommended by U.S. Army experts, that provides students of helicopter and aeronautical engineering with an understanding of the aerodynamic phenomena of the rotor. In addition, it furnishes the tools for quantitative evaluation of both rotor performance and the helicopter as a whole. Now both volumes of the original have been reprinted together in this inexpensive Dover edition. In Volume I: "Basic Theories of Rotor Aerodynamics," the concept of rotary-wing aircraft in general is defined, followed by comparison of the energy effectiveness of helicopters with that of other static-thrust generators in hover, as well as with various air and ground vehicles in forward translation. Volume II: "Performance Prediction of Helicopters" offers practical application of the rotary-wing aerodynamic theories discussed in Volume I, and contains complete and detailed performance calculations for conventional single-rotor, winged, and tandem-rotor helicopters. Graduate students with some background in general aerodynamics, or those engaged in other fields of aeronautical or nonaeronautical engineering, will find this an essential and thoroughly practical reference text on basic rotor dynamics. While the material deals primarily with the conventional helicopter and its typical regimes of flight, Rotary-Wing Aerodynamics also provides a comprehensive insight into other fields of rotary-wing aircraft analysis as well.
Download or read book Final Report of IEA Annex 14 written by J. G. Schepers and published by . This book was released on 1997 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Basic Helicopter Aerodynamics written by John M. Seddon and published by John Wiley & Sons. This book was released on 2011-06-09 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Basic Helicopter Aerodynamics is widely appreciated as an easily accessible, rounded introduction to the first principles of the aerodynamics of helicopter flight. Simon Newman has brought this third edition completely up to date with a full new set of illustrations and imagery. An accompanying website www.wiley.com/go/seddon contains all the calculation files used in the book, problems, solutions, PPT slides and supporting MATLAB® code. Simon Newman addresses the unique considerations applicable to rotor UAVs and MAVs, and coverage of blade dynamics is expanded to include both flapping, lagging and ground resonance. New material is included on blade tip design, flow characteristics surrounding the rotor in forward flight, tail rotors, brown-out, blade sailing and shipborne operations. Concentrating on the well-known Sikorsky configuration of single main rotor with tail rotor, early chapters deal with the aerodynamics of the rotor in hover, vertical flight, forward flight and climb. Analysis of these motions is developed to the stage of obtaining the principal results for thrust, power and associated quantities. Later chapters turn to the characteristics of the overall helicopter, its performance, stability and control, and the important field of aerodynamic research is discussed, with some reference also to aerodynamic design practice. This introductory level treatment to the aerodynamics of helicopter flight will appeal to aircraft design engineers and undergraduate and graduate students in aircraft design, as well as practising engineers looking for an introduction to or refresher course on the subject.
Download or read book Smart Rotor Modeling written by Leonardo Bergami and published by Springer. This book was released on 2014-05-30 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: A smart rotor is a wind turbine rotor that, through a combination of sensors, control units and actuators actively reduces the variation of the aerodynamic loads it has to withstand. Smart rotors feature promising load alleviation potential and might provide the technological breakthrough required by the next generation of large wind turbine rotors. The book presents the aero-servo-elastic model of a smart rotor with Adaptive Trailing Edge Flaps for active load alleviation and provides an insight on the rotor aerodynamic, structural and control modeling. A novel model for the unsteady aerodynamics of an air foil section with flap is presented and coupled with a multi-body structural representation. A smart rotor configuration is proposed, where the Adaptive Trailing Edge Flaps extend along the outer 20 % of the blade span. Linear Quadratic and Model Predictive algorithms are formulated to control the flap deflection. The potential of the smart rotor is finally confirmed by simulations in a turbulent wind field. A significant reduction of the fatigue loads on the blades is reported: the flaps, which cover no more than 1.5 % of the blade surface, reduce the fatigue load by 15 %; a combination of flap and individual pitch control allows for fatigue reductions up to 30 %.
Download or read book Field Rotor Aerodynamics written by A. J. Brand and published by . This book was released on 1996 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Special Opportunities in Helicopter Aerodynamics written by W. J. McCroskey and published by . This book was released on 1983 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerodynamic research relating to modern helicopters includes the study of three-dimensional, unsteady, nonlinear flow fields. A selective review is made of some of the phenomenon that hamper the development of satisfactory engineering prediction techniques, but which provides a rich source of research opportunities: flow separations, compressibility effects, complex vortical wakes, and aerodynamic interference between components. Several examples of work in progress are given, including dynamic stall alleviation, the development of computational methods for transonic flow, rotor-wake predictions, and blade-vortex interactions. (Author).
Download or read book Aerodynamics of a Lifting Rotor Due to Near Field Unsteady Effects written by Robert L. Milliken and published by . This book was released on 1988 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IEA Annex XIV XVIII Field Rotor Aerodynamics written by J. G. Schepers and published by . This book was released on 2001 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Final Report of IEA Annex XIV written by J. G. Schepers and published by . This book was released on 1997 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Wind Energy Aerodynamics written by Bernhard Stoevesandt and published by Springer Nature. This book was released on 2022-08-04 with total page 1495 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides both a comprehensive overview and deep insights on the state-of-the-art methods used in wind turbine aerodynamics, as well as their advantages and limits. The focus of this work is specifically on wind turbines, where the aerodynamics are different from that of other fields due to the turbulent wind fields they face and the resultant differences in structural requirements. It gives a complete picture of research in the field, taking into account the different approaches which are applied. This book would be useful to professionals, academics, researchers and students working in the field.
Download or read book Three dimensional Transonic Rotor Flow Field Reconstructed from Holographic Interferogram Data written by J. K. Kittleson and published by . This book was released on 1985 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: Holographic interferometry and computer-assisted tomography (CAT) are used to determine the transonic flow field of a model rotor blade in hover. A pulsed ruby laser recorded 40 interferograms with a 61 cm-diam view field near the model rotor-blade tip operating at a tipo Mach number of 0.90. After digitizing the interferograms and extracting fringe-order functions, the data are transferred to a CAT code. The CAT code then calculates pressure coefficients in several planes above the blade surface. The values from the holography-CAT method compare favorably with previously obtained numerical computations and laser velocimeter measurements at most locations near the blade tip. The results demonstrate the techniques's potential for three-dimensional transonic rotor flow studies. Keywords: Holographic interferometry; Computer assisted tomography; Helicopter aerodynamics; Transonic aerodynamics.
