Download or read book Field Mathematics for Electromagnetics Photonics and Materials Science written by Bernard Maxum and published by SPIE Press. This book was released on 2005 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary objective of this book is to offer a review of vector calculus needed for the physical sciences and engineering. This review includes necessary excursions into tensor analysis intended as the reader's first exposure to tensors, making aspects of tensors understandable at the undergraduate level.
Download or read book Introduction to Complex Mediums for Optics and Electromagnetics written by Werner S. Weiglhofer and published by SPIE Press. This book was released on 2003 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complex-mediums electromagnetics (CME) describes the study of electromagnetic fields in materials with complicated response properties. This truly multidisciplinary field commands the attentions of scientists from physics and optics to electrical and electronic engineering, from chemistry to materials science, to applied mathematics, biophysics, and nanotechnology. This book is a collection of essays to explain complex mediums for optical and electromagnetic applications. All contributors were requested to write with two aims: first, to educate; second, to provide a state-of-the-art review of a particular subtopic. The vast scope of CME exemplified by the actual materials covered in the essays should provide a plethora of opportunities to the novice and the initiated alike.
Download or read book Fundamentals of Electromagnetics with MATLAB written by Karl Erik Lonngren and published by SciTech Publishing. This book was released on 2007 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accompanying CD-ROM contains a MATLAB tutorial.
Download or read book Mathematical Models and Numerical Methods for Full Wave Analysis of Prolate and Oblate Spheroidal Conformal Microwave Components written by Saif Al-Hasson and published by Cuvillier Verlag. This book was released on 2014-08-29 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conformal components are used nowadays at higher rate than ever before. They can be found in curved mobile phones, communication, navigation, and imaging systems in land, water, air, and space vehicles. The integration of those components within the external structure became of significant importance for aerodynamic, electromagnetic, aesthetic, or physical reasons. As a result, many mathematical models were previously developed to analyze and optimize such conformed devices. In this thesis, we contributed to this field by developing various models for full wave analysis of spheroidal components. As a starting point, mathematical formulas for conforming antennas on oblate and prolate spheroids were obtained. Those conformation methods were validated by conforming many antennas on spheroidal surfaces. They were then used to formulate Method of Moments equations with spheroidally curved current functions for analyzing wire antennas of random shape conformed to spheroids in the frequency domain. The complete model was applied to a conformal Archimedean spiral antenna on an oblate spheroid and showed that the conformed spiral has similar current distribution as its planar counterpart but produces an unsymmetrical radiation pattern. The obtained model was then extended to spheroidal multi-layer structures by integrating the spheroidal dyadic Green’s Function within its mathematical derivation. However, due to a detected divergence in that function, the model couldn’t be implemented. On the side of time based analysis methods, a Finite Difference Time Domain method was developed for closed oblate and prolate spheroidal structures. Alternative formulas for the structure’s singularities and the condition of numerical stability were derived as well. The obtained model was then validated and used to characterize spheroidal cavities in the time and frequency domains. The method was extended later to unbounded spheroidal domain by deriving the Absorbing Boundary Conditions using the One Way Wave method. The whole model was then applied to characterize a patch antenna conformed to a prolate spheroid. Finally, an analytical solution for the transient fields in spherical multilayer media energized by spherical harmonics source and an algorithm for tracing back the path of all the reflected waves were obtained. The model was applied to different multilayer structures where the transient response was obtained and validated against a numerical solution.
Download or read book Fundamentals of Polarimetric Remote Sensing written by John Robert Schott and published by SPIE Press. This book was released on 2009 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is for those who need an introduction to polarimetric signals to begin working in the field of polarimetric remote sensing, particularly where the contrast between manmade objects and natural backgrounds are the subjects of interest. The book takes a systems approach to the physical processes involved with formation, collection, and analysis of polarimetric remote sensing data in the visible through longwave infrared. (pBRDF) is then introduced as a way to characterize the reflective and emissive polarimetric behavior of materials. With Dr. Schott's text, you will gain an introduction to polarimetric remote sensing, an appreciation of its issues, and the tools to begin to work in the field.
Download or read book Fundamentals of Infrared Detector Materials written by Michael A. Kinch and published by SPIE Press. This book was released on 2007 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: The choice of available infrared (IR) detectors for insertion into modern IR systems is both large and confusing. The purpose of this volume is to provide a technical database from which rational IR detector selection criteria evolve, and thus clarify the options open to the modern IR system designer. Emphasis concentrates mainly on high-performance IR systems operating in a tactical environment, although there also is discussion of both strategic environments and low- to medium-performance system requirements.
Download or read book Infrared Optics and Zoom Lenses written by Allen Mann and published by SPIE Press. This book was released on 2009 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ten years after the publication of Infrared Optics and Zoom Lenses, this text is still the only current publication devoted exclusively to infrared zoom lenses. This updated second edition includes 18 new refractive and reflective infrared zoom systems, bringing the total number of infrared zoom optical systems to 41 systems. Other additions include a section on focal plane arrays and a new closing chapter specifically devoted to applications of infrared zoom lenses. Coverage of wavelength region has been expanded to include the near infrared. Additional topics include an examination of the importance of principal planes, methods for athermalization by means of computer glass substitution, and global optimization techniques for zoom lens design.
Download or read book Dielectric Metamaterials and Metasurfaces in Transformation Optics and Photonics written by Elena Semouchkina and published by Woodhead Publishing. This book was released on 2021-08-06 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dielectric Metamaterials and Metasurfaces in Transformation Optics and Photonics addresses the complexity of electromagnetic responses from arrays of dielectric resonators, which are often omitted from consideration when using simplified metamaterials concepts. The book's authors present a thorough consideration of dielectric resonances in different environments which is needed to design optical and photonic devices. Dielectric metamaterials and photonic crystals are compared, with their effects analyzed. Design approaches and examples of designs for invisibility cloaks based on artificial media are also included. Current challenge of incorporating artificial materials into transformation optics-based and photonics devices are also covered. Presents advanced concepts of utilizing artificial materials for optical and photonic device applications Includes design approaches of materials for transformation optics, cloaking, applications and examples of these designs Compares photonic crystals and metamaterials, their effects, properties and characteristics
Download or read book Matrix Methods for Optical Layout written by Gerhard Kloos and published by SPIE Press. This book was released on 2007 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to familiarize the reader with the method of Gaussian matrices and some related tools of optical design. The matrix method provides a means to study an optical system in the paraxial approximation. This text contains new results such as theorems on the design of variable optics, on integrating rods, on the optical layout of prism devices, etc. The results are derived in a step-by-step way so that the reader might apply the methods presented here to resolve design problems with ease.
Download or read book Radiation Thermometry written by Peter Saunders and published by SPIE Press. This book was released on 2007 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers an introduction to the subject of radiation thermometry, focusing on sources of measurement error and giving advice on methods for minimizing or eliminating these errors. This title cover such topics as: blackbody radiation, emissivity, reflection errors, and atmospheric absorption and emission; and common radiation thermometers.
Download or read book The Physics and Engineering of Solid State Lasers written by Yehoshua Y. Kalisky and published by SPIE Press. This book was released on 2006 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains the mutual influences between the physical and dynamic processes in solids and their lasing properties. This book provides insight into the physics and engineering of solid state lasers by integrating information from several disciplines, including solid state physics, materials science, photophysics, and dynamic processes in solids.
Download or read book Artificial Neural Networks written by Kevin L. Priddy and published by SPIE Press. This book was released on 2005 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This tutorial text provides the reader with an understanding of artificial neural networks (ANNs), and their application, beginning with the biological systems which inspired them, through the learning methods that have been developed, and the data collection processes, to the many ways ANNs are being used today. The material is presented with a minimum of math (although the mathematical details are included in the appendices for interested readers), and with a maximum of hands-on experience. All specialized terms are included in a glossary. The result is a highly readable text that will teach the engineer the guiding principles necessary to use and apply artificial neural networks.
Download or read book Metrics for High quality Specular Surfaces written by Lionel R. Baker and published by SPIE Press. This book was released on 2004 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book supplies the optical component and systems designer, and quality assurance engineers and managers with the definitions, measurement principles, and standard metrics used to characterize high-quality specular surfaces. The author covers both the traditional visual methods as well as newer (but not necessarily better) computer-aided techniques and describes the metrics adopted by the new ISO standards, including the setting of form and finish tolerances. Key issues of industry are raised, to help stimulate research and development of new methods and standards that blend the best of the old and new approaches to surface assessment.
Download or read book Introduction to Confocal Fluorescence Microscopy written by Michiel Muller and published by SPIE Press. This book was released on 2006 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive account of the theory of image formation in a confocal fluorescence microscope as well as a practical guideline to the operation of the instrument, its limitations, and the interpretation of confocal microscopy data. The appendices provide a quick reference to optical theory, microscopy-related formulas and definitions, and Fourier theory.
Download or read book Logic based Nonlinear Image Processing written by Stephen Marshall and published by SPIE Press. This book was released on 2007 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides insight into the design of optimal image processing operators for implementation directly into digital hardware. Starting with simple restoration examples and using the minimum of statistics, the book provides a design strategy for a wide range of image processing applications. The text is aimed principally at electronics engineers and computer scientists, but will also be of interest to anyone working with digital images.
Download or read book Practical Applications of Infrared Thermal Sensing and Imaging Equipment written by Herbert Kaplan and published by SPIE Press. This book was released on 2007 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: \- Preface - List of Figures - List of Tables - List of Acronyms and Abbreviations - Preface - Introduction - Basics of Noncontact Thermal Measurement - Matching the Instrument to the Application - Instruments Overview - Using IR Sensing and Imaging Instruments - Introduction to Applications - Plant Condition Monitoring and Predictive Maintenance - Buildings and Infrastructure - Materials Testing - Product and Process Monitoring Control - Night Vision, Security, and Surveillance - Life Sciences Thermography - Appendix A: Commercial Instrument Performance Characteristics - Appendix B: Manufacturers of IR Sensing and Imaging Instruments - Appendix C: Table of Generic Normal Emissivities of Materials - Appendix D: A Glossary of Terms for the Infrared Thermographer
Download or read book Optical Imaging in Projection Microlithography written by Alfred Kwok-Kit Wong and published by SPIE Press. This book was released on 2005 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here for the first time is an integrated mathematical view of the physics and numerical modeling of optical projection lithography that efficiently covers the full spectrum of the important concepts. Alfred Wong offers rigorous underpinning, clarity in systematic formulation, physical insight into emerging ideas, as well as a system-level view of the parameter tolerances required in manufacturing. Readers with a good working knowledge of calculus can follow the step-by-step development, and technologists can gather general concepts and the key equations that result. Even the casual reader will gain a perspective on the key concepts, which will likely help facilitate dialog among technologists.
