Download or read book Field Manual Fm 7 15 the Army Universal Task List Including All Changes Up to Change 9 Issued December 9 2011 written by United States Army and published by CreateSpace. This book was released on 2012-02-04 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Field Manual FM 7-15 The Army Universal Task List including all changes up to Change 9, issued December 9, 2011 describes the structure and content of the Army Universal Task List (AUTL). The AUTL is a comprehensive, but not all-inclusive listing of Army tasks, missions, and operations. Units and staffs perform these tasks, mission, and operations or capability at corps level and below. For each task, the AUTL provides a numeric reference hierarchy, a task title, a task description, a doctrine reference, and, in most cases, recommended measures of performance (measures) for training developers to develop training and evaluation outline evaluation criteria for supporting tasks. The task proponent is responsible for developing the training and evaluation outlines that supports each AUTL task. As a catalog, the AUTL captures doctrine as it existed on the date of its publication. The AUTL can help commanders develop a mission-essential task list (METL). It (the AUTL) provides tasks, missions and operations or capabilities for a unit, company-sized and above, and staffs. Commanders should use the AUTL as a cross-reference for tasks. Commanders may use the AUTL to supplement their core training focused METL or the directed training focused METL as required. FM 7-0 and FM 7-1 discuss in detail METL development and requirements. The primary source for standards for most Army units is their proponent-approved individual and collective tasks. Proponents revise standards when the factors of mission, enemy, terrain and weather, troops and support available, time available, civil considerations (METT-TC) significantly differ from those associated with a task training and evaluation outline. Significant differences in METT-TC may include new unit equipment; a table of organization; force packaging decisions during deployment; or new unit tasks. Proponents and trainers will use the unit's assigned table of organization and equipment, as the basis for mission analysis during the analysis phase of the Systems Approach to Training process. Trainers may use the AUTL as a catalog of warfighting function tasks when developing collective tasks. The AUTL is not all-inclusive. If the proponent or school identifies or develops a new AUTL task requirement, the new task will be provided to the Collective Training Directorate for approval and the Combined Arms Doctrine Directorate for input to AUTL revision. Task proponents and schools write and define the conditions and standards (training and evaluation outlines) for individual and collective tasks which support the AUTL. The AUTL does not include tasks Army forces perform as part of joint and multinational forces at the strategic and operational levels. Those tasks are included in the Universal Joint Task List (UJTL). The UJTL defines tasks and functions performed by Army elements operating at the operational and strategic levels of war. The UJTL provides an overall description of joint tasks to apply at the national strategic, theater strategic, operational, and tactical levels of command. The UJTL also provides a standard reference system used by United States Army Training and Doctrine Command (TRADOC) combat developers for analysis, such as front-end analysis of force element capabilities. Each military Service is required to publish its own tactical task list to supplement the UJTL. (The UJTL bibliography includes the other Services' task lists.) The AUTL is the Army supplement to the UJTL.

Download or read book The Army Universal Task List written by U. S. Department of the Army and published by www.Militarybookshop.CompanyUK. This book was released on 2010-10 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Field Manual (FM 7-15) describes the structure and content of the Army Universal Task List (AUTL). The AUTL is a comprehensive, but not all-inclusive listing of Army tasks, missions, and operations. Units and staffs perform these tasks, mission, and operations or capability at corps level and below. For each task, the AUTL provides a numeric reference hierarchy, a task title, a task description, a doctrine reference, and, in most cases, recommended measures of performance (measures) for training developers to develop training and evaluation outline evaluation criteria for supporting tasks. The task proponent is responsible for developing the training and evaluation outlines that supports each AUTL task. As a catalog, the AUTL captures doctrine as it existed on the date of its publication. The AUTL can help commanders develop a mission-essential task list (METL). The AUTL provides tasks, missions and operations or capabilities for a unit, company-sized and above, and staffs. Commanders should use the AUTL as a cross-reference for tasks. Commanders may use the AUTL to supplement their core training focused METL or the directed training focused METL as required.

Download or read book Field Manual FM 7 15 the Army Universal Task List with Change 10 29 June 2012 written by United States Government US Army and published by Createspace Independent Pub. This book was released on 2012-11-23 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: FM 7-15 describes the structure and content of the Army Universal Task List (AUTL). The AUTL is a comprehensive, but not all-inclusive listing of Army tasks, missions, and operations. Units and staffs perform these tasks, mission, and operations or capability at corps level and below. For each task, the AUTL provides a numeric reference hierarchy, a task title, a task description, a doctrine reference, and, in most cases, recommended measures of performance (measures) for training developers to develop training and evaluation outline evaluation criteria for supporting tasks. The task proponent is responsible for developing the training and evaluation outlines that supports each AUTL task. As a catalog, the AUTL captures doctrine as it existed on the date of its publication. The AUTL can help commanders develop a mission-essential task list (METL). It (the AUTL) provides tasks, missions and operations or capabilities for a unit, company-sized and above, and staffs. Commanders should use the AUTL as a cross-reference for tasks. Commanders may use the AUTL to supplement their core training focused METL or the directed training focused METL as required. FM 7-0 and FM 7-1 discuss in detail METL development and requirements. The primary source for standards for most Army units is their proponent-approved individual and collective tasks. Proponents revise standards when the factors of mission, enemy, terrain and weather, troops and support available, time available, civil considerations (METT-TC) significantly differ from those associated with a task training and evaluation outline. Significant differences in METT-TC may include new unit equipment; a table of organization; force packaging decisions during deployment; or new unit tasks. Proponents and trainers will use the unit's assigned table of organization and equipment, as the basis for mission analysis during the analysis phase of the Systems Approach to Training process. Trainers may use the AUTL as a catalog of warfighting function tasks when developing collective tasks. The AUTL is not all-inclusive. If the proponent or school identifies or develops a new AUTL task requirement, the new task will be provided to the Collective Training Directorate for approval and the Combined Arms Doctrine Directorate for input to AUTL revision. Task proponents and schools write and define the conditions and standards (training and evaluation outlines) for individual and collective tasks which support the AUTL. The AUTL does not include tasks Army forces perform as part of joint and multinational forces at the strategic and operational levels. Those tasks are included in the Universal Joint Task List (UJTL). The UJTL defines tasks and functions performed by Army elements operating at the operational and strategic levels of war. The UJTL provides an overall description of joint tasks to apply at the national strategic, theater strategic, operational, and tactical levels of command. The UJTL also provides a standard reference system used by United States Army Training and Doctrine Command (TRADOC) combat developers for analysis, such as front-end analysis of force element capabilities. Each military Service is required to publish its own tactical task list to supplement the UJTL. (The UJTL bibliography includes the other Services' task lists.) The AUTL is the Army supplement to the UJTL.

Download or read book The Army Universal Task List FM 7 15 with Changes 1 10 As of June 2012 written by Department of the Army and published by Createspace Independent Pub. This book was released on 2012-11-26 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: FM 7-15, “The Army Universal Task List,” describes the structure and content of the Army Universal Task List (AUTL). The AUTL is a comprehensive, but not all-inclusive listing of Army tasks, missions, and operations. Units and staffs perform these tasks, mission, and operations or capability at corps level and below. For each task, the AUTL provides a numeric reference hierarchy, a task title, a task description, a doctrine reference, and, in most cases, recommended measures of performance (measures) for training developers to develop training and evaluation outline evaluation criteria for supporting tasks. The task proponent is responsible for developing the training and evaluation outlines that supports each AUTL task. As a catalog, the AUTL captures doctrine as it existed on the date of its publication. The AUTL can help commanders develop a mission-essential task list (METL). It (the AUTL) provides tasks, missions and operations or capabilities for a unit, company-sized and above, and staffs. Commanders should use the AUTL as a cross-reference for tasks. Commanders may use the AUTL to supplement their core training focused METL or the directed training focused METL as required. FM 7-0 and FM 7-1 discuss in detail METL development and requirements. The primary source for standards for most Army units is their proponent-approved individual and collective tasks. Proponents revise standards when the factors of mission, enemy, terrain and weather, troops and support available, time available, civil considerations (METT-TC) significantly differ from those associated with a task training and evaluation outline. Significant differences in METT-TC may include new unit equipment; a table of organization; force packaging decisions during deployment; or new unit tasks. Proponents and trainers will use the unit's assigned table of organization and equipment, as the basis for mission analysis during the analysis phase of the Systems Approach to Training process. Trainers may use the AUTL as a catalog of warfighting function tasks when developing collective tasks. The AUTL is not all-inclusive. If the proponent or school identifies or develops a new AUTL task requirement, the new task will be provided to the Collective Training Directorate for approval and the Combined Arms Doctrine Directorate for input to AUTL revision. Task proponents and schools write and define the conditions and standards (training and evaluation outlines) for individual and collective tasks which support the AUTL. The AUTL does not include tasks Army forces perform as part of joint and multinational forces at the strategic and operational levels. Those tasks are included in the Universal Joint Task List (UJTL). The UJTL defines tasks and functions performed by Army elements operating at the operational and strategic levels of war. The UJTL provides an overall description of joint tasks to apply at the national strategic, theater strategic, operational, and tactical levels of command. The UJTL also provides a standard reference system used by United States Army Training and Doctrine Command (TRADOC) combat developers for analysis, such as front-end analysis of force element capabilities. Each military Service is required to publish its own tactical task list to supplement the UJTL.

Download or read book The Army Universal Task List written by Department of the Army and published by . This book was released on 2010-12-09 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: FM 7-15 describes the structure and content of the Army Universal Task List (AUTL). The AUTL is a comprehensive, but not all-inclusive listing of Army tasks, missions, and operations. Units and staffs perform these tasks, mission, and operations or capability at corps level and below. For each task, the AUTL provides a numeric reference hierarchy, a task title, a task description, a doctrine reference, and, in most cases, recommended measures of performance (measures) for training developers to develop training and evaluation outline evaluation criteria for supporting tasks. The task proponent is responsible for developing the training and evaluation outlines that supports each AUTL task. As a catalog, the AUTL captures doctrine as it existed on the date of its publication. The AUTL can help commanders develop a mission-essential task list (METL). It (the AUTL) provides tasks, missions and operations or capabilities for a unit, company-sized and above, and staffs. Commanders should use the AUTL as a cross-reference for tasks. Commanders may use the AUTL to supplement their core training focused METL or the directed training focused METL as required. FM 7-0 and FM 7-1 discuss in detail METL development and requirements. The primary source for standards for most Army units is their proponent-approved individual and collective tasks. Proponents revise standards when the factors of mission, enemy, terrain and weather, troops and support available, time available, civil considerations (METT-TC) significantly differ from those associated with a task training and evaluation outline. Significant differences in METT-TC may include new unit equipment; a table of organization; force packaging decisions during deployment; or new unit tasks. Proponents and trainers will use the unit's assigned table of organization and equipment, as the basis for mission analysis during the analysis phase of the Systems Approach to Training process. Trainers may use the AUTL as a catalog of warfighting function tasks when developing collective tasks. The AUTL is not all-inclusive. If the proponent or school identifies or develops a new AUTL task requirement, the new task will be provided to the Collective Training Directorate for approval and the Combined Arms Doctrine Directorate for input to AUTL revision. Task proponents and schools write and define the conditions and standards (training and evaluation outlines) for individual and collective tasks which support the AUTL. The AUTL does not include tasks Army forces perform as part of joint and multinational forces at the strategic and operational levels. Those tasks are included in the Universal Joint Task List (UJTL). The UJTL defines tasks and functions performed by Army elements operating at the operational and strategic levels of war. The UJTL provides an overall description of joint tasks to apply at the national strategic, theater strategic, operational, and tactical levels of command. The UJTL also provides a standard reference system used by United States Army Training and Doctrine Command (TRADOC) combat developers for analysis, such as front-end analysis of force element capabilities. Each military Service is required to publish its own tactical task list to supplement the UJTL. (The UJTL bibliography includes the other Services' task lists.) The AUTL is the Army supplement to the UJTL.

Download or read book Field Manual FM 7 21 13 the Soldier s Guide Including Change 1 Issued September written by United States Army and published by Createspace Independent Pub. This book was released on 2012-02-05 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Field Manual is dedicated to the men and women of the United States Army in the active component, the Army National Guard and the US Army Reserve-altogether America's finest fighting machine. You are the soldiers that fight and win the Nation's wars. Be proud. FM 7-21.13, The Soldier's Guide, is a pocket reference for subjects in which all soldiers must maintain proficiency, regardless of rank, component or military occupational specialty (MOS). It condenses information from other field manuals, training circulars, soldier training publications, Army regulations, and other sources. It addresses both general subjects and selected combat tasks. While not all-inclusive or intended as a stand-alone document, the guide offers soldiers a ready reference in many subjects. FM 7-21.13 is divided into seven chapters. Chapter 1 describes the importance of Army Values and the obligations of every soldier. Chapter 2 provides a short history of the Army and examines the environment in which it operates. Chapter 3 addresses the duties, responsibilities and authority of the soldier, how to present a military appearance, and an introduction to the Uniform Code of Military Justice. The importance of customs, courtesies, and traditions is in Chapter 4. The soldier's role in training and a brief description of training management are in Chapter 5. Chapter 6 discusses the importance of counseling and professional development. The benefits of serving in the Army are described in Chapter 7. The appendices contain specific combat tasks that are important to every soldier and information on programs the Army offers to assist soldiers and their family members. The Soldier's Guide provides information critical to the success of soldiers in the operational environment. Reading this manual will help prepare soldiers for full spectrum operations and is a tool in building the Future Force soldier. This book will be useful to every soldier who reads it.

Download or read book Field Manual Fm 5 0 the Operations Process Including Change 1 written by U.s. Army and published by Createspace Independent Pub. This book was released on 2012-02-01 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: FM 5-0 (including Change 1), The Operations Process, constitutes the Army's view on planning, preparing, executing, and assessing operations. It describes how commanders-supported by their staffs, subordinate commanders, and other military and civilian partners-exercise mission command during the conduct of full spectrum operations. It describes how design assists commanders with understanding complex problems and developing an operational approach to solve or manage those problems throughout the conduct of operations. This manual applies to all Army forces. The principal audience for this manual is Army commanders and unit staffs (officers, noncommissioned officers, and Soldiers). Commanders and staffs of Army headquarters serving as a joint task force or a multinational headquarters should also refer to applicable joint or multinational doctrine for the exercise of command and control. Trainers and educators throughout the Army also use this manual. Terms that have joint or Army definitions are identified in both the glossary and the text. Glossary references: The glossary lists most terms used in field manual (FM) 5-0 that have joint or Army definitions. Terms for which FM 5-0 is the proponent field manual (the authority) are indicated with an asterisk in the glossary. Text references: Definitions for which FM 5-0 is the proponent field manual are printed in boldface in the text. These terms and their definitions will be incorporated into the next revision of FM 1-02, Operational Terms and Graphics. For other definitions in the text, the term is italicized and the number of the proponent manual follows the definition. FM 5-0 applies to the Active Army, the Army National Guard (ARNG)/Army National Guard of the United States (ARNGUS), and the United States Army Reserve (USAR) unless otherwise stated. Topics: Ch1 - Fundamentals of the Operations Process Ch2 - Planning Ch3 - Design Ch4 - Preparation Ch5 - Execution Ch6 - Assessment Appendix A - Command Post Organization and Operations Appendix B - The Military Decision Making Process Appendix C - Troop Leading Procedures Appendix D - Guidelines for Commander's Planning Guidance Appendix E - Army Operation Plan and Order Format Appendix F - Task Organization Appendix G - Running Estimates Appendix H - Formal Assessment Plans Appendix I - Rehearsals Appendix J - Military Briefings

Download or read book Field Manual FM 3 0 Operations Change 1 6 December 2017 written by United States Government US Army and published by Createspace Independent Publishing Platform. This book was released on 2017-12-22 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication, Field Manual FM 3-0 Operations Change 1 6 December 2017, describes how Army forces, as part of a joint team, shape operational environments (OEs), prevent conflict, conduct large-scale ground combat, and consolidate gains against a peer threat. This manual provides a foundation for how Army forces conduct prompt and sustained large-scale combat operations. FM 3-0 is applicable to all members of the Army Profession: leaders, Soldiers, and Army Civilians. The principle audience for FM 3-0 is commanders, staffs, and leaders. This manual also provides the foundation for training and Army education system curricula and future capabilities development. FM 3-0 contains fundamentals, tactics, and techniques focused on fighting and winning large-scale combat operations. This manual uses historical vignettes, quotes, and graphics to reinforce the doctrine within. FM 3-0 contains 8 chapters and 2 appendixes: Chapter 1 describes large-scale combat operations and associated challenges Army forces face today. It addresses anticipated OEs, threats, joint operations, and the Army's strategic roles in support of joint operations. The chapter then discusses unified land operations and associated topics, including decisive action, operational art, and the operational framework. Chapter 2 is divided into four sections. Section I provides an overview of Army echelons, capabilities, and training. Section II provides a general discussion of Army forces in a theater. Section III describes Army capabilities by warfighting function. Section IV addresses training for large-scale ground combat. Chapter 3 provides an overview of operations to shape the OE. It discusses operation assessments and describes threat activities prior to armed conflict. A discussion of shaping activities performed by Army forces follows. The chapter then describes Army organizations and their roles as they shape the OE. Chapter 4 provides an overview of operations to prevent conflict. It addresses assessing OEs in which Army forces conduct activities to prevent war during crisis action, and it provides a description of threats. The chapter continues with a discussion of the major activities within operations to prevent. The chapter concludes with the roles of the theater army, corps, divisions, and brigades. Chapter 5 is divided into four sections. Section I provides an overview of large-scale combat operations. Section II addresses tactical enabling tasks that apply to both the defense and the offense. Section III provides a discussion of forcible entry operations from which Army forces may defend or continue the offense. Section IV discusses the transition to consolidation of gains. Chapter 6 begins with a general discussion of the defense, followed by a discussion of how an enemy may attack. It continues with sections on planning and preparing corps and division defenses. It then addresses the three primary defensive tasks. Chapter 7 begins with a general discussion of the offense, followed by a discussion of how an enemy may defend. It continues with a section on how corps and divisions plan for the offense. This chapter then provides +a discussion of forms of maneuver and the four offensive tasks. The chapter concludes with a discussion on the subordinate forms of attack. Chapter 8 expands upon operations to consolidate gains discussed in previous chapters. It describes how Army forces transition from large-scale ground combat operations to operations that translate tactical and operational success into lasting gains. An expanded description of the operational framework and the consolidation area follows. The chapter concludes with a description of consolidation activities. Appendix A provides doctrine on command and support relationships that form the basis for unity of command and unity of effort. Appendix B provides commanders with a listing of risk considerations for the planning of large-scale ground combat.

Download or read book Field Manual FM 3 21 8 FM 7 8 written by United States Government US Army and published by CreateSpace. This book was released on 2007-03-28 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: This field manual provides a doctrinal framework on how Infantry rifle platoons and squads fight. It also addresses rifle platoon and squad non-combat operations across the spectrum of conflict. Content discussions include principles, tactics, techniques, procedures, terms, and symbols that apply to small unit operations in the current operational environment (COE). FM 3-21.8 supersedes FM 7-8, Infantry Rifle Platoon and Squad, dated 22 April 1992 (with change 1, dated 1 March 2001). It is not intended to be a stand-alone publication. To fully understand operations of the rifle platoon and squad, leaders must have an understanding of FM 3-21.10, The Infantry Rifle Company, and FM 3-21.20 (FM 7-20), The Infantry Battalion. The primary audiences for this manual are Infantry rifle platoon leaders, platoon sergeants, and squad and fire team leaders. Secondary audiences include, instructors in U.S. Army Training and Doctrine Command (TRADOC) schools, writers of Infantry training literature, other Infantry leaders and staff officers, and Reserve Officer Training Candidate (ROTC) and military academy instructors. Infantry leaders must understand this manual before they can train their companies using ARTEP 7-8 MTP, and ARTEP 7-8 Drill. They should use this manual as a set along with the publications listed in the references. The Summary of Changes list major changes from the previous edition by chapter and appendix. Although these changes include lessons learned from training and U.S. Army operations all over the world, they are not specific to any particular theater of war. They are intended to apply across the entire spectrum of conflict.

Download or read book Army Field Manual FM 7 0 Training the Force written by United States Army and published by Digireads.Com. This book was released on 2007 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The U.S. Army exists for one reason-to serve the Nation. From the earliest days of its creation, the Army has embodied and defended the American way of life and its constitutional system of government. It will continue to answer the call to fight and win our Nation's wars, whenever and wherever they may occur. That is the Army's non-negotiable contract with the American people. FM 7-0 is the Army's capstone training doctrine and is applicable to all units, at all levels, and in all components. While the examples in this manual are principally focused at division and below, FM 7-0 provides essential fundamentals for all individual, leader, and unit training."-From the Preface.

Download or read book Soldier s Manual written by United States. Department of the Army and published by . This book was released on 1976 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book U S Army Ranger Handbook written by U.S. Army Ranger School and published by . This book was released on 2013 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The Official US Army Ranger Handbook, as used in Fort Benning" -- Amazon website.

Download or read book Field Manual FM 3 23 35 FM 23 35 Combat Training with Pistols M9 and M11 with Change 4 Issued August 2008 written by United States Army and published by Createspace Independent Pub. This book was released on 2012-03-13 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication applies to the Active Army, the Army National Guard (ARNG)/Army National Guard of the United States (ARNGUS), and the US Army Reserve (USAR) unless otherwise stated. It provides guidance on the operation and marksmanship of the M9, 9-mm pistol and the M11, 9-mm pistol. It reflects current Army standards in weapons qualification. It is a guide for the instructor to develop training programs, plans, and lessons that meet the objectives of the US Army Marksmanship program for developing combat-effective marksmen. The Soldier develops confidence, knowledge, and skills by following the guidelines in this manual.

Download or read book Field Manual FM 4 02 6 8 10 1 the Medical Company Tactics Techniques and Procedures Including Change 1 Issued April 9 2004 written by United States Government US Army and published by Createspace Independent Pub. This book was released on 2012-09-03 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This field manual (FM) provides information on the employment, functions, and operations of divisional and nondivisional medical companies of Army of Excellence (AOE) and Army XXI divisions to include separate brigades, the Stryker brigade combat team (SBCT), and the armored cavalry regiment. It is intended to serve as doctrine and a primary reference publication for medical planners and the medical commander and his staff.

Download or read book Field Manual FM 1 02 Operational Terms and Graphics W Change 1 February 2010 written by United States Government Us Army and published by CreateSpace. This book was released on 2012-02-02 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual is a dual-Service US Army and US Marine Corps publication introducing new terms and definitions and updating existing definitions as reflected in the latest editions of Army field manuals and Marine Corps doctrinal, warfighting, and reference publications. It complies with DOD Military Standard 2525. When communicating instructions to subordinate units, commanders and staffs from company through corps should use this manual as a dictionary of operational terms and military graphics.This manual incorporates changes in joint terminology and definitions as reflected in JP 1-02 (as amended through June 2003) and provides a single standard for developing and depicting handdrawn and computer-generated military symbols for situation maps, overlays, and annotated aerial photographs for all types of military operations. The symbology chapters of this manual focus primarily on land military symbols applicable for the Army and Marine Corps. In addition to terminology, this manual includes the following updated lists:• Approved acronyms and abbreviations with their expansions.• Two-letter country codes.• Brevity codes and their meanings.• Procedural words.• Tactical tasks.This manual applies to the Active Army, the US Army Reserves, the Army National Guard and the US Marine

Download or read book Field Manual Fm 4 30 13 Fm 9 13 Ammunition Handbook written by United States Government Army and published by Createspace Independent Publishing Platform. This book was released on 2013-03-25 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This field manual provides ready reference and guidance for units and soldiers that handle munitions items. It is not a comprehensive manual, but it does provide useful data on important points of munitions service support. Also, it is a training tool for munitions units and soldiers. Focus is on tactics, techniques, and procedures used by soldiers handling munitions. The information and guidance contained herein will help them to safely receive, ship, store, handle, maintain, and issue munitions. The manual provides information on processing unit turn-ins, destroying unserviceable munitions, and transporting munitions in new, maturing, or mature theaters of operations in support of the force projection Army. The information in this manual conforms to the procedures of MOADS, MOADS-PLS, and modularity, and will take munitions units well into the twenty-first century. The proponent for this publication is United States Army Combined Arms Support Command & Ft Lee.

Download or read book Field Manual Fm 3 21 5 Fm 22 5 Drill and Ceremonies January 20 2012 US Army written by United States Army and published by CreateSpace. This book was released on 2012-02-02 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This training circular provides guidance for Army wide uniformity in the conduct of drill and ceremonies. It includes methods of instructing drill, teaching techniques, individual and unit drill, manual of arms for infantry weapons, and various other aspects of basic drill instruction. This publication is designed for use by Soldiers of all military occupational skills, to include the new Soldier in the initial entry training environment. Since all situations or eventualities pertaining to drill and ceremonies cannot be foreseen, commanders may find it necessary to adjust the procedures to local conditions. However, with the view toward maintaining consistency throughout the Army, the procedures prescribed herein should be followed as closely as possible. Personnel preparing to give drill instruction must be thoroughly familiar with Chapters 3 through 7 before attempting to teach material in Chapters 8 and 9. For ease in distinguishing a preparatory command from a command of execution, the commands of execution appear in BOLD CAP letters and preparatory commands appear in Bold Italic letters. Reference to positions and movements appear in Italics. Army Regulation (AR) 670-1 should be used as a reference for the proper wearing of uniforms and insignia. This publication applies to the Active Army, the U.S. Army National Guard (ARNG)/Army National Guard of the United States (ARNGUS), and the United States Army Reserve (USAR) unless otherwise stated.