Download or read book Field Manual FM 1 02 2 Military Symbols November 2020 This Publication Supersedes ADP 1 02 Terms and Military Symbols written by U. S. Department U.S. Department of the Army and published by . This book was released on 2020-12-10 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: *This publication supersedes ADP 1-02, dated 14 August 2018. This publication compiles Department of Defense (DOD) Military Standard (MIL-STD) 2525D approved military symbols applicable to land operations for use in U.S. Army doctrinal publications and command and control systems. FM 1-02.2 is the proponent for all U.S. Army military symbols in use or that apply to doctrine that are not currently included in MIL-STD 2525D. MIL-STD 2525D establishes the single standard for developing and depicting hand-drawn and computer-generated military symbols for situation maps, overlays, and annotated aerial photographs for all types of military operations. When communicating instructions to subordinate units, commanders and staffs from company through corps echelons use this publication as the standard for properly constructing land operations associated military symbols.

Download or read book Field Manual FM 1 02 2 Military Symbols November 2020 written by United States Government Us Army and published by . This book was released on 2020-11-13 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This United States Army publication, Field Manual FM 1-02.2 Military Symbols November 2020, FM 1-02.2 constitutes approved Army military symbols for general use to depict land operations. The principal audience for FM 1-02.2 is all members of the profession of arms. Trainers and educators throughout the Army will also use this publication. This publication compiles Department of Defense (DOD) Military Standard (MIL-STD) 2525D approved military symbols applicable to land operations for use in U.S. Army doctrinal publications and command and control systems. FM 1-02.2 is the proponent for all U.S. Army military symbols in use or that apply to doctrine that are not currently included in MIL-STD 2525D. When communicating instructions to subordinate units, commanders and staffs from company through corps echelons use this publication as the standard for properly constructing land operations associated military symbols.

Download or read book Operational Terms and Graphics written by Department of the Army and published by CreateSpace. This book was released on 2014-04-28 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual is a dual-Service US Army and US Marine Corps publication introducing new terms and definitions and updating existing definitions as reflected in the latest editions of Army field manuals and Marine Corps doctrinal, warfighting, and reference publications. It complies with DOD Military Standard 2525. When communicating instructions to subordinate units, commanders and staffs from company through corps should use this manual as a dictionary of operational terms and military graphics. This manual incorporates changes in joint terminology and definitions as reflected in JP 1-02 (asamended through June 2003) and provides a single standard for developing and depicting handdrawnand computer-generated military symbols for situation maps, overlays, and annotatedaerial photographs for all types of military operations. The symbology chapters of this manualfocus primarily on land military symbols applicable for the Army and Marine Corps. In additionto terminology, this manual includes the following updated lists:• Approved acronyms and abbreviations with their expansions.• Two-letter country codes.• Brevity codes and their meanings.• Procedural words.• Tactical tasks.This manual applies to the Active Army, the US Army Reserves, the Army National Guard andthe US Marine Corps.

Download or read book Army Doctrine Publication Adp 1 02 Terms and Military Symbols August 2018 written by United States Government U. S. Army and published by Createspace Independent Publishing Platform. This book was released on 2018-09-04 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication supersedes and combines ADP 1-02, dated 31 August 2012, and ADRP 1-02, dated 16 November 2016 into a single modernized, updated, document for the next generation of warfare. This manual, Army Doctrine Publication ADP 1-02 Terms and Military Symbols August 2018, compiles definitions of all Army terms approved for use in Army doctrinal publications, including ADPs, FMs, and ATPs. It also includes joint terms appearing in the glossaries of Army doctrinal publications. ADP 1-02 also lists shortened forms (whether considered acronyms or abbreviations) approved for use in Army doctrinal publications. In addition, ADP 1-02 incorporates North Atlantic Treaty Organization (NATO) terms appearing in the glossaries of Army doctrinal publications. ADP 1-02 also provides a single standard for developing and depicting hand-drawn and computer-generated military symbols for situation maps, overlays, and annotated aerial photographs for all types of military operations. It is the Army proponent publication for all military symbols, and it complies with Department of Defense (DOD) Military Standard (MIL-STD) 2525D. The symbology chapters of this ADP focus primarily on military symbols applicable to Army land operations. When communicating instructions to subordinate units, commanders and staffs from company through corps echelons should use this publication as a dictionary of operational terms and military symbols. ADP 1-02 is organized as follows: Chapter 1 presents terms. Chapter 2 presents acronyms, abbreviations, and country codes. Chapter 3 introduces military symbology fundamentals. Chapters 4 through 7 provide icons for units, individuals, organizations, equipment, installations, and activities. Chapter 8 introduces control measure symbols. Chapter 9 discusses tactical mission tasks. Chapter 10 discusses the course of action sketch. The terminology entries in chapter 1 of this publication fall into three categories: 1) Definitions applicable to the Army only. 2) Joint (DOD) definitions commonly used in Army publications. 3) North Atlantic Treaty Organization (NATO) definitions commonly used in Army publications. For each term and definition, a proponent publication is cited in parentheses after the definition.

Download or read book ADP 1 02 Terms and Military Symbols August 2018 Replaces ADRP 1 02 Headquarters Department of the Army written by Zachary Willey and published by . This book was released on 2020-04-14 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: We're passionate about the Army. We share our passion by helping our Soldiers and Leaders master the basics. ADP 1-02 is the definitive doctrinal foundation for military terms and symbols and their application in mission planning and briefs. The Army Doctrine Publication 1-02 covers topics to include Army acronyms and abbreviations, military symbology basics, terms and symbols for units and organizations, terms and symbols for equipment and installations, terms and symbols for military activities and control measures, tactical mission tasks, and course of action sketches.

Download or read book Operational Terms and Military Symbols Us Army Adp 1 02 written by U. S. Army and published by Createspace Independent Publishing Platform. This book was released on 2017-11-12 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: THE LANGUAGE OF ARMY TERMINOLOGY, ACRONYMS AND SYMBOLOGY Current edition ADP 1-02, big 8.5" x 11" format - large, clear text & illustrations. "Batteries last hours, books last decades. Get the print edition!" Army Doctrine Publication (ADP) 1-02 provides foundational doctrine for establishing and using Army terms, acronyms, and symbols. It discusses how a common language is essential to the effective conduct of military operations. It describes how doctrinal terms and symbols enhance communication among military professionals and ensure a common understanding of doctrinal principles. ADP 1-02 addresses why terms and symbols are important. A common set of doctrinal terms and military symbols is one of the most important elements in a military force's ability to communicate when conducting operations; the force cannot function effectively without it. Terms and symbols can communicate a great deal of information with a simple word, phrase, or image. Each time a term or symbol is used, it helps eliminate the need for a lengthy explanation of a complex idea. For example, when a unit leader tells Soldiers to conduct a zone reconnaissance, they know exactly what they must accomplish. This publication begins by discussing the professional language of land warfare. It then discusses terminology, followed by acronyms and abbreviations. It concludes by discussing the role of symbology in relation to doctrine. This is tied together by their importance in conducting military operations. Search for 'CARLILE MILITARY LIBRARY' to find more TOP-FLIGHT, SQUARED-AWAY publications for your professional bookshelf! Proudly published in the U.S.A. by CARLILE MEDIA. Information purposes only.

Download or read book Army Doctrine Reference Publication Adrp 1 02 Operational Terms and Military Symbols Change 2 28 November 2012 written by United States Government Us Army and published by Createspace Independent Pub. This book was released on 2012-12-05 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is Change 2 to ADRP 1-02. Change 2 incorporates numerous changes in doctrinal terminology. Army Doctrine Reference Publication (ADRP) 1-02 constitutes approved operational terminology and symbology for general use. It builds on the foundational doctrine established in Army Doctrine Publication (ADP) 1-02. The principal audience for ADRP 1-02 is all members of the profession of Arms. Commanders and staffs of Army headquarters serving as joint task force or multinational headquarters should also refer to applicable joint or multinational doctrine concerning the range of military operations and joint or multinational forces. Trainers and educators throughout the Army will also use this manual. Commanders, staffs, and subordinates ensure their decisions and actions comply with applicable U.S., international, and, in some cases, host-nation laws and regulations. Commanders at all levels ensure their Soldiers operate in accordance with the law of war and the rules of engagement. (See Field Manual [FM] 27-10.) This publication implements the following international agreements: - STANAG 3680/AAP-06(2012), NATO Glossary of Terms and Definitions (English and French). - AAP-15(2012), NATO Glossary of Abbreviations Used in NATO Documents and Publications (English and French). - STANAG 2019 (Edition 6)/APP-6(C), NATO Joint Military Symbology. - STANAG 1241 (Edition 5), NATO Standard Identity Description Structure for Tactical Use. ADRP 1-02 uses joint terms where applicable. ADRP 1-02 applies to the Active Army, Army National Guard/Army National Guard of the United States, and United States Army Reserve unless otherwise stated. The proponent of ADRP 1-02 is the United States Army Combined Arms Center. The preparing agency is the Combined Arms Doctrine Directorate, United States Army Combined Arms Center.

Download or read book Field Manual FM 1 02 1 Operational Terms November 2019 written by United States Government Us Army and published by . This book was released on 2019-12-19 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first edition of Field Manual FM 1-02.1 Operational Terms November 2019 compiles definitions of all Army terms approved for use in Army doctrinal publications, including ADPs, FMs, and ATPs. It also includes joint terms defined in the glossaries of Army doctrinal publications. FM 1-02.1 also lists shortened forms (whether considered acronyms or abbreviations) approved for use in Army doctrinal publications. In addition, FM 1-02.1 incorporates North Atlantic Treaty Organization (NATO) terms appearing in the glossaries of Army doctrinal publications. When communicating instructions to subordinate units, commanders and staffs from company through corps echelons should use this publication as a dictionary of operational terms and military symbols. FM 1-02.1 is organized as follows: Chapter 1 presents terms. Chapter 2 presents acronyms, abbreviations, and country codes. The terminology entries in chapter 1 of this publication fall into three categories: Definitions applicable to the Army only. Joint (DOD) definitions commonly used in Army publications. North Atlantic Treaty Organization (NATO) definitions commonly used in Army publications. For each term and definition, a proponent publication is cited in parentheses after the definition.The acronym and abbreviation entries listed in section I of chapter 2 are Army and joint. Shortened forms applicable only to Army doctrine are shown in boldface, to distinguish Army from joint usage. Acronyms are added to FM 1-02.1 and the online "Army Dictionary" when a defined term has an associated acronym or if an acronym has doctrinal cross branch or functional usage. The cross branch usage criterion for considering an acronym for inclusion is that it must appear in two or more doctrinal publications that are not branch specific or related. FM 1-02.1 is now the proponent of terms for which ADP 1-02 had been the proponent.

Download or read book Army Doctrine Publication ADP 1 02 Terms and Military Symbols written by Department of the Army and published by . This book was released on 2020-01-30 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Army Doctrine Publication ADP 1-02 Terms and Military Symbols August 2018 Notice: This is a Paperback book version of the "Army Doctrine Publication ADP 1-02 Terms and Military Symbols August 2018". Full version, All Chapters included. This publication is available (Electronic version) in the official website of the United states HEADQUARTERS, DEPARTMENT OF THE ARMY. This document is properly formatted and printed as a perfect sized copy 8.5x11 (black ink)", making it easy for you to read details in some figures/illustrations and tables. * The version of this publication is as described above (this article is updated after each new edition). Disclaimer: "The use or appearance of United States Department of Army publications, text, images or logos on a non-Federal Government website does not imply or constitute Department of Army endorsement of the distribution service."

Download or read book Army Doctrine Reference Publication ADP 1 02 Operational Terms and Military Symbols August 2012 written by United States Government US Army and published by CreateSpace. This book was released on 2012-09-05 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: Army Doctrine Reference Publication (ADRP) 1-02 constitutes approved operational terminology and symbology for general use. It builds on the foundational doctrine established in Army Doctrine Publication (ADP) 1-02. The principal audience for ADRP 1-02 is all members of the profession of Arms. Commanders and staffs of Army headquarters serving as joint task force or multinational headquarters should also refer to applicable joint or multinational doctrine concerning the range of military operations and joint or multinational forces. Trainers and educators throughout the Army will also use this manual. Commanders, staffs, and subordinates ensure their decisions and actions comply with applicable U.S., international, and, in some cases, host-nation laws and regulations. Commanders at all levels ensure their Soldiers operate in accordance with the law of war and the rules of engagement. (See Field Manual [FM] 27-10.) This publication implements the following international agreements: - STANAG 3680/AAP-06(2012), NATO Glossary of Terms and Definitions (English and French). - AAP-15(2012), NATO Glossary of Abbreviations Used in NATO Documents and Publications (English and French). - STANAG 2019 (Edition 6)/APP-6(C), NATO Joint Military Symbology. - STANAG 1241 (Edition 5), NATO Standard Identity Description Structure for Tactical Use. ADRP 1-02 uses joint terms where applicable. ADRP 1-02 applies to the Active Army, Army National Guard/Army National Guard of the United States, and United States Army Reserve unless otherwise stated. The proponent of ADRP 1-02 is the United States Army Combined Arms Center. The preparing agency is the Combined Arms Doctrine Directorate, United States Army Combined Arms Center.

Download or read book Field Manual FM 1 02 Operational Terms and Graphics W Change 1 February 2010 US Army written by United States Army and published by CreateSpace. This book was released on 2012-04-07 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual is a dual-Service US Army and US Marine Corps publication introducing new terms and definitions and updating existing definitions as reflected in the latest editions of Army field manuals and Marine Corps doctrinal, warfighting, and reference publications. It complies with DOD Military Standard 2525. When communicating instructions to subordinate units, commanders and staffs from company through corps should use this manual as a dictionary of operational terms and military graphics.This manual incorporates changes in joint terminology and definitions as reflected in JP 1-02 (as amended through June 2003) and provides a single standard for developing and depicting handdrawn and computer-generated military symbols for situation maps, overlays, and annotated aerial photographs for all types of military operations. The symbology chapters of this manual focus primarily on land military symbols applicable for the Army and Marine Corps. In addition to terminology, this manual includes the following updated lists:• Approved acronyms and abbreviations with their expansions.• Two-letter country codes.• Brevity codes and their meanings.• Procedural words.• Tactical tasks.This manual applies to the Active Army, the US Army Reserves, the Army National Guard and the US Marine Corps.

Download or read book Army Doctrine Reference Publication Adrp 1 02 Terms and Military Symbols December 2015 written by United States Government Us Army and published by Createspace Independent Publishing Platform. This book was released on 2015-12-20 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication, Army Doctrine Reference Publication ADRP 1-02 Terms and Military Symbols December 2015, constitutes approved Army doctrinal terminology and symbology for general use. It builds on the foundational doctrine established in Army Doctrine Publication (ADP) 1-02. The principal audience for ADRP 1-02 is all members of the profession of Arms. Commanders and staffs of Army headquarters serving as joint task force or multinational headquarters should also refer to applicable joint or multinational doctrine concerning the range of military operations and joint or multinational forces. Trainers and educators throughout the Army will also use this publication. This revision of Army Doctrine Reference Publication (ADRP) 1-02 compiles definitions of all Army terms approved for use in Army doctrinal publications, including Army doctrine publications (ADPs), Army Doctrine Reference Publications (ADRPs), field manuals (FMs), and Army techniques publications (ATPs). It also includes joint terms appearing in the glossaries of Army doctrinal publications as of September 2015. ADRP 1-02 also lists shortened forms (whether considered acronyms or abbreviations) approved for use in Army doctrinal publications. In addition, unlike the 2013 edition of ADRP 1-02, this revision incorporates North Atlantic Treaty Organization (NATO) terms appearing in the glossaries of Army doctrinal publications as of January 2014.

Download or read book Field Manual FM 1 02 Operational Terms and Graphics W Change 1 February 2010 written by United States Government Us Army and published by CreateSpace. This book was released on 2012-02-02 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual is a dual-Service US Army and US Marine Corps publication introducing new terms and definitions and updating existing definitions as reflected in the latest editions of Army field manuals and Marine Corps doctrinal, warfighting, and reference publications. It complies with DOD Military Standard 2525. When communicating instructions to subordinate units, commanders and staffs from company through corps should use this manual as a dictionary of operational terms and military graphics.This manual incorporates changes in joint terminology and definitions as reflected in JP 1-02 (as amended through June 2003) and provides a single standard for developing and depicting handdrawn and computer-generated military symbols for situation maps, overlays, and annotated aerial photographs for all types of military operations. The symbology chapters of this manual focus primarily on land military symbols applicable for the Army and Marine Corps. In addition to terminology, this manual includes the following updated lists:• Approved acronyms and abbreviations with their expansions.• Two-letter country codes.• Brevity codes and their meanings.• Procedural words.• Tactical tasks.This manual applies to the Active Army, the US Army Reserves, the Army National Guard and the US Marine

Download or read book Army Doctrine Reference Publication ADRP 1 02 Operational Terms and Military Symbols August 2012 written by United States Government US Army and published by CreateSpace. This book was released on 2012-10-07 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: Army Doctrine Reference Publication (ADRP) 1-02 constitutes approved operational terminology and symbology for general use. It builds on the foundational doctrine established in Army Doctrine Publication (ADP) 1-02. The principal audience for ADRP 1-02 is all members of the profession of Arms. Commanders and staffs of Army headquarters serving as joint task force or multinational headquarters should also refer to applicable joint or multinational doctrine concerning the range of military operations and joint or multinational forces. Trainers and educators throughout the Army will also use this manual. Commanders, staffs, and subordinates ensure their decisions and actions comply with applicable U.S., international, and, in some cases, host-nation laws and regulations. Commanders at all levels ensure their Soldiers operate in accordance with the law of war and the rules of engagement. (See Field Manual [FM] 27-10.) This publication implements the following international agreements: - STANAG 3680/AAP-06(2012), NATO Glossary of Terms and Definitions (English and French). - AAP-15(2012), NATO Glossary of Abbreviations Used in NATO Documents and Publications (English and French). - STANAG 2019 (Edition 6)/APP-6(C), NATO Joint Military Symbology. - STANAG 1241 (Edition 5), NATO Standard Identity Description Structure for Tactical Use. ADRP 1-02 uses joint terms where applicable. ADRP 1-02 applies to the Active Army, Army National Guard/Army National Guard of the United States, and United States Army Reserve unless otherwise stated. The proponent of ADRP 1-02 is the United States Army Combined Arms Center. The preparing agency is the Combined Arms Doctrine Directorate, United States Army Combined Arms Center.

Download or read book Operational Terms and Graphics written by Department of the Army and published by . This book was released on 2004-09-21 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual is a dual-Service US Army and US Marine Corps publication introducing new terms and definitions and updating existing definitions as reflected in the latest editions of Army field manuals and Marine Corps doctrinal, warfighting, and reference publications. It complies with DOD Military Standard 2525. When communicating instructions to subordinate units, commanders and staffs from company through corps should use this manual as a dictionary of operational terms and military graphics. This manual incorporates changes in joint terminology and definitions as reflected in JP 1-02 (as amended through June 2003) and provides a single standard for developing and depicting handdrawn and computer-generated military symbols for situation maps, overlays, and annotated aerial photographs for all types of military operations. The symbology chapters of this manual focus primarily on land military symbols applicable for the Army and Marine Corps. In addition to terminology, this manual includes the following updated lists: * Approved acronyms and abbreviations with their expansions.* Two-letter country codes.* Brevity codes and their meanings.* Procedural words.* Tactical tasks.This manual applies to the Active Army, the US Army Reserves, the Army National Guard and the US Marine Corps.This manual implements the following international agreements:* STANAG 3680/AAP-6 (2003), NATO Glossary of Terms and Definitions.* AAP-15, NATO Glossary of Abbreviations Used in NATO Documents and Publications.* STANAG 1059, National Distinguishing Letters for Use by NATO Armed Forces, where appropriate for Army- and/or Marine Corps-specific usage.* STANAG 2019/APP-6A, Military Symbols For Land Based Systems.* QSTAG 509, Military Symbols.* STANAG 2022, Intelligence Reports, for the evaluation ratings in annex A.* STANAG 2961, Classes of Supply of NATO Land Forces, for reference and comparison with US classes of supply.

Download or read book Army Doctrine Reference Publication Adrp 1 02 Terms and Military Symbols September 2013 written by United States Government Army and published by Createspace Independent Publishing Platform. This book was released on 2013-10-17 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revision of Army Doctrine Reference Publication (ADRP) 1-02 compiles definitions of all Army terms approved for use in Army doctrinal publications (Army doctrine publications [ADPs], ADRPs, field manuals [FMs], and Army techniques publications [ATPs]) as of June 2013. ADRP 1-02 also lists shortened forms (whether considered acronyms or abbreviations) approved for use in Army doctrinal publications. In addition, unlike the 2012 edition of ADRP 1-02, this revision incorporates joint terms appearing in the glossaries of Army doctrinal publications, as of June 2013. This publication's name has been updated to reflect the inclusion of these joint terms. Moreover, the Army's terminology and symbology database, which was under development in 2012, now augments this publication. ADRP 1-02 also provides a single standard for developing and depicting hand drawn and computer generated military symbols for situation maps, overlays, and annotated aerial photographs for all types of military operations. It is the Army proponent publication for all military symbols and complies with Department of Defense (DOD) Military Standard (MIL-STD) 2525C. The symbology chapters of this ADRP focus primarily on military symbols applicable to Army land operations. When communicating instructions to subordinate units, commanders and staffs from company through corps level should use this publication as a dictionary of operational terms and military symbols. ADRP 1-02 is organized as follows: Chapter 1 presents terms. Chapter 2 presents acronyms and abbreviations. Chapter 3 introduces military symbology basics. Chapters 4 through 7 provide icons for units, individuals, organizations, equipment, installations, and activities. Chapter 8 introduces control measure symbols. Chapter 9 discusses tactical mission tasks. Chapter 10 discusses the course of action sketch.

Download or read book Army Doctrine Publication Adp 1 02 Operational Terms and Military Symbols August 2012 written by United States Government US Army and published by Createspace Independent Pub. This book was released on 2012-09-05 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: Army Doctrine Publication (ADP) 1-02 provides foundational doctrine for establishing and using Army terms, acronyms, and symbols. It discusses how a common language is essential to the effective conduct of military operations. It describes how doctrinal terms and symbols enhance communication among military professionals and ensure a common understanding of doctrinal principles. ADP 1-02 addresses why terms and symbols are important. ADP 1-02 establishes the basis for Army doctrinal terms, acronyms, and symbols in Army Doctrine Reference Publication (ADRP) 1-02, Operational Terms and Military Symbols. ADP 1-02 and ADRP 1-02 are part of the Doctrine 2015 Initiative, which also includes a terminology database that will contain all doctrinal terms established in Army doctrinal publications. The principal audience for ADP 1-02 is all members of the profession of arms. Commanders and staffs of Army headquarters serving as joint task force or multinational headquarters should also refer to applicable joint or multinational doctrine concerning the range of military operations and joint or multinational forces. Trainers and educators throughout the Army will also use this manual. Commanders, staffs, and subordinates ensure their decisions and actions comply with applicable U.S., international, and, in some cases, host-nation laws and regulations. Commanders at all levels ensure their Soldiers operate in accordance with the law of war and the rules of engagement. (See Field Manual [FM] 27-10.) ADP 1-02 uses joint terms where applicable. Selected joint and Army terms and definitions appear in both the glossary and the text. For definitions shown in the text, the term is italicized and the number of the proponent publication follows the definition. ADP 1-02 is not the proponent for any Army terms. ADP 1-02 applies to the Active Army, Army National Guard/Army National Guard of the United States, and United States Army Reserve unless otherwise stated. References to the Marine Corps in this publication acknowledge the common terminology shared by the land services and contained in ADRP 1-02 but do not imply that ADP 1-02 is a Marine Corps publication. The proponent of ADP 1-02 is the United States Army Combined Arms Center. The preparing agency is the Combined Arms Doctrine Directorate, United States Army Combined Arms Center.