Download or read book Field Guide to Molded Optics written by Alan Symmons and published by SPIE-International Society for Optical Engineering. This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most common optical molding technologies are injection molding of optical plastics and precision glass molding. This Field Guide primarily focuses on these two technologies but also covers the full spectrum of optical molding. It provides a convenient and concise source of knowledge on optical molding technologies and is a valuable addition to the publication base.
Download or read book Field Guide to Molded Optics written by Alan Symmons and published by . This book was released on 2016 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Molding processes continue to innovate and push the boundaries of optical systems, not only for state-of-the-art, high-volume consumer products but also touching on almost every application where optics are used, from automotive headlights and medical endoscopes to thermal weapon sights for the warfighter. The most common optical molding technologies are injection molding of optical plastics and precision glass molding. This Field Guide primarily focuses on these two technologies but also covers the full spectrum of optical molding. It provides a convenient and concise source of knowledge on optical molding technologies and will be a valuable addition to a publication base that is rather limited"--
Download or read book Molded Optics written by Michael Schaub and published by CRC Press. This book was released on 2016-04-19 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: While several available texts discuss molded plastic optics, none provide information on all classes of molded optics. Filling this gap, Molded Optics: Design and Manufacture presents detailed descriptions of molded plastic, glass, and infrared optics. Since an understanding of the manufacturing process is necessary to develop cost-effective, produ
Download or read book Handbook of Plastic Optics written by Stefan Bäumer and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of plastic optics instead of glass offers a number of advantages. Most importantly, it is far less expensive, and therefore opens a huge potential for mass production. It also offers the opportunity to use unique element configuration. This book gives a coherent overview over the current status of injection molded optics describing in detail all aspects of plastic optics, from design issues to production technology and quality control. The focus is firmly set on practical applications, making this an indispensable information source for all those working in optics research and development. The contributors, each one a leading expert in his chosen discipline, possess either a background in industry or close relations to the industry, thus bringing in an ample amount of practical experience.
Download or read book Handbook of Optomechanical Engineering written by Anees Ahmad and published by CRC Press. This book was released on 2017-07-11 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook covers all major aspects of optomechanical engineering - from conceptual design to fabrication and integration of complex optical systems. The practical information within is ideal for optical and optomechanical engineers and scientists involved in the design, development and integration of modern optical systems for commercial, space, and military applications. Charts, tables, figures, and photos augment this already impressive text. Fully revised, the new edition includes 4 new chapters: Plastic optics, Optomechanical tolerancing and error budgets, Analysis and design of flexures, and Optomechanical constraint equations.
Download or read book Harnessing Light written by National Research Council and published by National Academies Press. This book was released on 1998-09-25 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical science and engineering affect almost every aspect of our lives. Millions of miles of optical fiber carry voice and data signals around the world. Lasers are used in surgery of the retina, kidneys, and heart. New high-efficiency light sources promise dramatic reductions in electricity consumption. Night-vision equipment and satellite surveillance are changing how wars are fought. Industry uses optical methods in everything from the production of computer chips to the construction of tunnels. Harnessing Light surveys this multitude of applications, as well as the status of the optics industry and of research and education in optics, and identifies actions that could enhance the field's contributions to society and facilitate its continued technical development.
Download or read book Optics Inspections and Tests written by Michael Hausner and published by SPIE-International Society for Optical Engineering. This book was released on 2016-06-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book instructs inspectors and designers of optical elements and assemblies with the primary means of inspection and testing, as well as the relevant tools and instruments"--
Download or read book Diffractive Optics written by Donald C. O'Shea and published by SPIE Press. This book was released on 2004 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the reader with the broad range of materials that were discussed in a series of short courses presented at Georgia Tech on the design, fabrication, and testing of diffractive optical elements (DOEs). Although there are not long derivations or detailed methods for specific engineering calculations, the reader should be familiar and comfortable with basic computational techniques. This text is not a 'cookbook' for producing DOEs, but it should provide readers with sufficient information to assess whether this technology would benefit their work, and to understand the requirements for using the concepts and techniques presented by the authors.
Download or read book Fiber Optics Engineering written by Mohammad Azadeh and published by Springer Science & Business Media. This book was released on 2009-08-05 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within the past few decades, information technologies have been evolving at a tremendous rate, causing profound changes to our world and our ways of life. In particular, fiber optics has been playing an increasingly crucial role within the telecommunication revolution. Not only most long-distance links are fiber based, but optical fibers are increasingly approaching the individual end users, providing wide bandwidth links to support all kinds of data-intensive applications such as video, voice, and data services. As an engineering discipline, fiber optics is both fascinating and challenging. Fiber optics is an area that incorporates elements from a wide range of techno- gies including optics, microelectronics, quantum electronics, semiconductors, and networking. As a result of rapid changes in almost all of these areas, fiber optics is a fast evolving field. Therefore, the need for up-to-date texts that address this growing field from an interdisciplinary perspective persists. This book presents an overview of fiber optics from a practical, engineering perspective. Therefore, in addition to topics such as lasers, detectors, and optical fibers, several topics related to electronic circuits that generate, detect, and process the optical signals are covered. In other words, this book attempts to present fiber optics not so much in terms of a field of “optics” but more from the perspective of an engineering field within “optoelectronics.
Download or read book Field Guide to Infrared Optical Materials written by Alan Symmons and published by SPIE-International Society for Optical Engineering. This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Today's SWIR, MWIR, LWIR and multispectral technologies cover a wide range of commercial and military applications and continue to rapidly expand in almost every aspect of our lives. This Field Guide focuses on the most common infrared crystals and glasses used in these systems, from their manufacturing methods through modern optical fabrication technologies to the end-use applications. Detailed optical, crystallographic, mechanical, chemical, and thermal properties of the most popular infrared materials are reviewed in detail along with process flows and relative comparisons. The Field Guide to Infrared Optical Materials provides a concise and convenient resource for those interested in the materials used in infrared optical systems"--
Download or read book Handbook of Carbon Graphite Diamonds and Fullerenes written by Hugh O. Pierson and published by William Andrew. This book was released on 2012-12-02 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a review of the science and technology of the element carbon and its allotropes: graphite, diamond and the fullerenes. This field has expanded greatly in the last three decades stimulated by many major discoveries such as carbon fibers, low-pressure diamond, and the fullerenes. The need for such a book has been felt for some time. These carbon materials are very different in structure and properties. Some are very old (charcoal), others brand new (the fullerenes). They have different applications and markets and are produced by different segments of the industry.Few studies are available that attempt to review the entire field of carbon as a whole discipline. Moreover these studies were written several decades ago and a generally outdated since the development of the technology is moving very rapidly and scope of applications is constantly expanding and reaching into new fields such as aerospace, automotive, semiconductors, optics, and electronics. In this book the author provides a valuable, up-to-date account of both the newer and traditional forms of carbon, both naturally occurring and man-made. This volume will be a valuable resource for both specialists in, and occasional users of carbon materials.
Download or read book Field Guide to Infrared Systems Detectors and FPAs written by Arnold Daniels and published by SPIE-International Society for Optical Engineering. This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "Field Guide to Infrared Systems, Detectors, and FPAs, Third Edition is devoted to fundamental background issues for optical detection processes. It compares the characteristics of cooled and uncooled detectors with an emphasis on spectral and blackbody responsivity, detectivity, as well as the noise mechanisms related to optical detection. It introduces the concepts of barrier infrared detector technologies, and encompasses the capabilities and challenges of third-generation infrared focal plane arrays as well as the advantages of using dual-band technology. The book combines numerous engineering disciplines necessary for the development of an infrared system. It considers the development of search infrared systems and specifies the main descriptors used to characterize thermal imaging systems. Furthermore, this guide clarifies, identifies, and evaluates the engineering tradeoffs in the design of an infrared system"--
Download or read book Fabrication of Complex Optical Components written by Ekkard Brinksmeier and published by Springer Science & Business Media. This book was released on 2012-09-13 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: High quality optical components for consumer products made of glass and plastic are mostly fabricated by replication. This highly developed production technology requires several consecutive, well-matched processing steps called a "process chain" covering all steps from mold design, advanced machining and coating of molds, up to the actual replication and final precision measurement of the quality of the optical components. Current market demands for leading edge optical applications require high precision and cost effective parts in large volumes. For meeting these demands it is necessary to develop high quality process chains and moreover, to crosslink all demands and interdependencies within these process chains. The Transregional Collaborative Research Center "Process chains for the replication of complex optical elements" at Bremen, Aachen and Stillwater worked extensively and thoroughly in this field from 2001 to 2012. This volume will present the latest scientific results for the complete process chain giving a profound insight into present-day high-tech production.
Download or read book The Mosquito written by Timothy C. Winegard and published by Penguin. This book was released on 2019-08-06 with total page 639 pages. Available in PDF, EPUB and Kindle. Book excerpt: **The instant New York Times bestseller.** *An international bestseller.* Finalist for the Lane Anderson Award Finalist for the RBC Taylor Award “Hugely impressive, a major work.”—NPR A pioneering and groundbreaking work of narrative nonfiction that offers a dramatic new perspective on the history of humankind, showing how through millennia, the mosquito has been the single most powerful force in determining humanity’s fate Why was gin and tonic the cocktail of choice for British colonists in India and Africa? What does Starbucks have to thank for its global domination? What has protected the lives of popes for millennia? Why did Scotland surrender its sovereignty to England? What was George Washington's secret weapon during the American Revolution? The answer to all these questions, and many more, is the mosquito. Across our planet since the dawn of humankind, this nefarious pest, roughly the size and weight of a grape seed, has been at the frontlines of history as the grim reaper, the harvester of human populations, and the ultimate agent of historical change. As the mosquito transformed the landscapes of civilization, humans were unwittingly required to respond to its piercing impact and universal projection of power. The mosquito has determined the fates of empires and nations, razed and crippled economies, and decided the outcome of pivotal wars, killing nearly half of humanity along the way. She (only females bite) has dispatched an estimated 52 billion people from a total of 108 billion throughout our relatively brief existence. As the greatest purveyor of extermination we have ever known, she has played a greater role in shaping our human story than any other living thing with which we share our global village. Imagine for a moment a world without deadly mosquitoes, or any mosquitoes, for that matter? Our history and the world we know, or think we know, would be completely unrecognizable. Driven by surprising insights and fast-paced storytelling, The Mosquito is the extraordinary untold story of the mosquito’s reign through human history and her indelible impact on our modern world order.
Download or read book A Practical Guide to Handling Laser Diode Beams written by Haiyin Sun and published by Springer. This book was released on 2015-02-20 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers the reader a practical guide to the control and characterization of laser diode beams. Laser diodes are the most widely used lasers, accounting for 50% of the global laser market. Correct handling of laser diode beams is the key to the successful use of laser diodes, and this requires an in-depth understanding of their unique properties. Following a short introduction to the working principles of laser diodes, the book describes the basics of laser diode beams and beam propagation, including Zemax modeling of a Gaussian beam propagating through a lens. The core of the book is concerned with laser diode beam manipulations: collimating and focusing, circularization and astigmatism correction, coupling into a single mode optical fiber, diffractive optics and beam shaping, and manipulation of multi transverse mode beams. The final chapter of the book covers beam characterization methods, describing the measurement of spatial and spectral properties, including wavelength and linewidth measurement techniques. The book is a significantly revised and expanded version of the title Laser Diode Beam Basics, Manipulations and Characterizations by the same author. New topics introduced in this volume include: laser diode types and working principles, non-paraxial Gaussian beam, Zemax modeling, numerical analysis of a laser diode beam, spectral property characterization methods, and power and energy characterization techniques. The book approaches the subject in a practical way with mathematical content kept to the minimum level required, making the book a convenient reference for laser diode users.
Download or read book Materials Science and Technology of Optical Fabrication written by Tayyab I. Suratwala and published by John Wiley & Sons. This book was released on 2018-10-16 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the fundamental science of grinding and polishing by examining the chemical and mechanical interactions over many scale lengths Manufacturing next generation optics has been, and will continue to be, enablers for enhancing the performance of advanced laser, imaging, and spectroscopy systems. This book reexamines the age-old field of optical fabrication from a materials-science perspective, specifically the multiple, complex interactions between the workpiece (optic), slurry, and lap. It also describes novel characterization and fabrication techniques to improve and better understand the optical fabrication process, ultimately leading to higher quality optics with higher yield. Materials Science and Technology of Optical Fabrication is divided into two major parts. The first part describes the phenomena and corresponding process parameters affecting both the grinding and polishing processes during optical fabrication. It then relates them to the critical resulting properties of the optic (surface quality, surface figure, surface roughness, and material removal rate). The second part of the book covers a number of related topics including: developed forensic tools used to increase yield of optics with respect to surface quality (scratch/dig) and fracture loss; novel characterization and fabrication techniques used to understand/quantify the fundamental phenomena described in the first part of the book; novel and recent optical fabrication processes and their connection with the fundamental interactions; and finally, special techniques utilized to fabricate optics with high damage resistance. Focuses on the fundamentals of grinding and polishing, from a materials science viewpoint, by studying the chemical and mechanical interactions/phenomena over many scale lengths between the workpiece, slurry, and lap Explains how these phenomena affect the major characteristics of the optic workpiece—namely surface figure, surface quality, surface roughness, and material removal rate Describes methods to improve the major characteristics of the workpiece as well as improve process yield, such as through fractography and scratch forensics Covers novel characterization and fabrication techniques used to understand and quantify the fundamental phenomena of various aspects of the workpiece or fabrication process Details novel and recent optical fabrication processes and their connection with the fundamental interactions Materials Science and Technology of Optical Fabrication is an excellent guidebook for process engineers, fabrication engineers, manufacturing engineers, optical scientists, and opticians in the optical fabrication industry. It will also be helpful for students studying material science and applied optics/photonics.
Download or read book Plastics Materials and Processes written by Charles A. Harper and published by John Wiley & Sons. This book was released on 2003-10-10 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics Materials and Processes: A Concise Encyclopedia is a resource for anyone with an interest in plastic materials and processes, from seasoned professionals to laypeople. Arranged in alphabetical order, it clearly explains all of the materials and processes as well as their major application areas and usages. Plastics Materials and Processes: A Concise Encyclopedia: Discusses and describes applications and practical uses of the materials and processes. Clear definitions and sufficient depth to satisfy the information seekers needs
