Download or read book Bridge Evaluation Repair and Rehabilitation written by A.S. Nowak and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Evaluation, repair and rehabilitation of bridges are increasingly important topics in the effort to deal with the deteriorating infrastructure. For example, in the United States about 40 percent of the nation's 570,000 bridges are classified, according to the Federal Highway Administra tion's (FHW A) criteria, as deficient and in need of rehabilitation and replacement. In other countries the situation is similar. FHW A estimates the cost of a bridge replacement and reha bilitation program at 50 billion dollars. The major factors that have contributed to the present situation are: the age, inadequate maintenance, increasing load spectra and environmental contamination. The deficient bridges are posted, repaired or replaced. The disposition of bridges involves clear economical and safety implications. To avoid high costs of replacement or repair, the evaluation must accurately reveal the present load carrying capacity of the struc ture and predict loads and any further changes in the capacity (deterioration) in the applicable time span. Accuracy of bridge evaluation can be improved by using the recent developments in bridge diagnostics, structural tests, material tests, structural analysis and probabilistic methods. There is a need for an international exchange of advanced experience to increase the research effi ciency. The Workshop is organized on the premise that the exchange of existing American and European experience in the area of bridge evaluation, repair and rehabilitation is beneficial for both parties involved.
Download or read book Canadian Journal of Civil Engineering written by and published by . This book was released on 2004 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book HRIS Abstracts written by National Research Council (U.S.). Highway Research Information Service and published by . This book was released on 1988 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings written by and published by . This book was released on 1982 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Timber Bridges written by Michael A. Ritter and published by . This book was released on 1990 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wood Design Focus written by and published by . This book was released on 1990 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bridges written by Baidar Bakht and published by Springer. This book was released on 2015-10-09 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a valuable guide for practicing bridge engineers and graduate students in structural engineering; its main purpose is to present the latest concepts in bridge engineering in fairly easy-to-follow terms. The book provides details of easy-to-use computer programs for: · Analysing slab-on-girder bridges for live load distribution. · Analysing slab and other solid bridge components for live load distribution. · Analysing and designing concrete deck slab overhangs of girder bridges under vehicular loads. · Determining the failure loads of concrete deck slabs of girder bridges under concentrated wheel loads. In addition, the book includes extensive chapters dealing with the design of wood bridges and soil-steel bridges. Further, a unique chapter on structural health monitoring (SHM) will help bridge engineers determine the actual load carrying capacities of bridges, as opposed to their perceived analytical capacities. The chapter addressing structures made with fibre-reinforced polymers will allow engineers to design highly durable, economical and sustainable structures. This chapter also provides guidance on rehabilitating deteriorated structures with these new materials. The book also deals with the philosophy of bridge design without resorting to complex equations. Additional material to this book can be downloaded from http://extras.springer.com
Download or read book Final Report written by International Association for Bridge and Structural Engineering. Congress and published by . This book was released on 1984 with total page 1280 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Timber Bridges written by Michael A. Ritter and published by . This book was released on 2005 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Timber's strength, light weight, and energy-absorbing properties furnish features desirable for bridge construction. Timber is capable of supporting short-term overloads without adverse effects. Contrary to popular belief, large wood members provide good fire resistance qualities that meet or exceed those of other materials in severe fire exposures. From an economic standpoint, wood is competitive with other materials on a first-cost basis and shows advantages when life cycle costs are compared. Timber bridges can be constructed in virtually any weather conditions, without detriment to the material. Wood is not damaged by continuous freezing and thawing and resists harmful effects of de-icing agents, which cause deterioration in other bridge materials. Timber bridges do not require special equipment for installation and can normally be constructed without highly skilled labor. They also present a natural and aesthetically pleasing appearance, particularly in natural surroundings. The misconception that wood provides a short service life has plagued timber as a construction material. Although wood is susceptible to decay or insect attack under specific conditions, it is inherently a very durable material when protected from moisture. Many covered bridges built during the 19th century have lasted over 100 years because they were protected from direct exposure to the elements. In modem applications, it is seldom practical or economical to cover bridges; however, the use of wood preservatives has extended the life of wood used in exposed bridge applications. Using modem application techniques and preservative chemicals, wood can now be effectively protected from deterioration for periods of 50 years or longer. In addition, wood treated with preservatives requires little maintenance and no painting. Another misconception about wood as a bridge material is that its use is limited to minor structures of no appreciable size. This belief is probably based on the fact that trees for commercial timber are limited in size and are normally harvested before they reach maximum size. Although tree diameter limits the size of sawn lumber, the advent of glued-laminated timber (glulam) some 40 years ago provided designers with several compensating alternatives. Glulam, which is the most widely used modem timber bridge material, is manufactured by bonding sawn lumber laminations together with waterproof structural adhesives. Thus, glulam members are virtually unlimited in depth, width, and length and can be manufactured in a wide range of shapes. Glulam provides higher design strengths than sawn lumber and provides better utilization of the available timber resource by permitting the manufacture of large wood structural elements from smaller lumber sizes. Technological advances in laminating over the past four decades have further increased the suitability and performance of wood for modern highway bridge applications.
Download or read book Application and Performance of Structural Materials and Exterior Facades written by James W. Richardson and published by . This book was released on 1986 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transportation Research Record written by and published by . This book was released on 2000 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Fibre Reinforced Polymer FRP Composites for Structural Applications written by Jiping Bai and published by Woodhead Publishing. This book was released on 2022-12-05 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Fibre-reinforced Polymer (FRP) Composites for Structural Applications, Second Edition provides updates on new research that has been carried out on the use of FRP composites for structural applications. These include the further development of advanced FRP composites materials that achieve lighter and stronger FRP composites, how to enhance FRP integrated behavior through matrix modification, along with information on pretension treatments and intelligence technology. The development of new technology such as automated manufacturing and processing of fiber-reinforced polymer (FRP) composites have played a significant role in optimizing fabrication processing and matrix formation. In this new edition, all chapters have been brought fully up-to-date to take on the key aspects mentioned above. The book's chapters cover all areas relevant to advanced FRP composites, from the material itself, its manufacturing, properties, testing and applications in structural and civil engineering. Applications span from civil engineering, to buildings and the energy industry. - Covers all areas relevant to advanced FRP composites, from the material itself, its manufacturing, properties, testing and applications in structural engineering - Features new manufacturing techniques, such as automated fiber placement and 3D printing of composites - Includes various applications, such as prestressed-FRP, FRP made of short fibers, continuous structural health monitoring using advanced optical fiber Bragg grating (FBG), durability of FRP-strengthened structures, and the application of carbon nano-tubes or platelets for enhancing durability of FRP-bonded structures
Download or read book Advanced fibre reinforced polymer FRP composites for structural applications written by F. Sarasini and published by Elsevier Inc. Chapters. This book was released on 2013-09-30 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: This chapter discusses the use of vinylester resin as a matrix in polymer composite materials to be used in civil engineering applications. The chapter begins by discussing the increasing trend of composite development and use in civil engineering along with the related reasons. It then reviews the chemistry of vinylester resins together with their mechanical and chemical properties as well as the applications of vinylester resin and composites in the construction industry. The chapter includes indications on future applications of vinylester-based fibre-reinforced composites along with a section devoted to sources of further and relevant information.
Download or read book 12e Congr s Vancouver BC Sep t 3 7 1984 written by International Association for Bridge and Structural Engineering. Congress and published by . This book was released on 1984 with total page 1286 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geodex Structural Information Service written by Geodex International and published by . This book was released on 1987 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Timber Bridges written by National Research Council (U.S.). Transportation Research Board and published by Transportation Research Board National Research. This book was released on 1986 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International SAMPE Symposium and Exhibition written by and published by . This book was released on 1997 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt:
