Download or read book FIDIC Red Yellow and Silver Book written by Leo Grutters and published by . This book was released on 2018-10-31 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: FIDIC 2nd Edition Red, Yellow and Silver books provides a unique drafter's-perspective clause-by-clause analysis of the 2016 editions of the FIDIC contracts. Readers will understand how each sub-clause is interlinked and how to minimise and avoid future disputes through the accurate interpretation of clauses.
Download or read book The 2017 FIDIC Contracts written by William Godwin and published by John Wiley & Sons. This book was released on 2020-02-19 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a clear and comprehensive guide to the 2017 FIDIC contracts—written by a member of the FIDIC Updates Task Group FIDIC contracts are the most widely used engineering standard form contracts internationally but until 2017 the three main forms (the Red, Yellow and Silver Books) had not been amended or updated for nearly two decades, since the first editions were published in 1999. Written by a specialist lawyer who was member of the FIDIC Updates Task Group responsible for writing the new contracts, this book examines in detail the many substantial changes they have introduced. After providing an overview the contracts are examined clause by clause with the aim of showing how each compares and contrasts with the others and how the second editions compare and contrast with the first. The first chapter describes how the Red, Yellow and Silver Books evolved from earlier contract forms and the distinctive characteristics of each, before providing an overview of the updates, including new potential risks for both Employer and Contractor, and then examining, in the second chapter, key general provisions such as the new rules on notices and limitation of liability. Chapter 3 examines the enhanced role of the Engineer in the Red and Yellow Books/Employer’s Representative’s function in the Silver including the new procedure for determinations as well as the Employer’s obligations and contract administration. The Contractor’s obligations are considered in chapter 4 while chapter 5 examines his responsibility for design in the Yellow and Silver Books. Chapters 6 to 14 deal respectively with plant, materials and workmanship and staff and labour; time-related provisions in the three contracts including extensions of time, and the Employer’s right to suspend the works; testing on and after completion and the Employer’s taking over of the works; defects after taking over, acceptance of the works and unfulfilled obligations; measurement (in the Red Book), the Contract Price and payment; the new variations regime and adjustments to the Price; termination and suspension; care of the works and indemnities and Exceptional Events (previously, Force Majeure). An important feature of the new contracts is their increased emphasis on clarity in the claims process and on dispute avoidance. These topics are examined in the final two chapters, 15 and 16, which deal respectively with the new claims and dispute resolution provisions of the 2017 forms. FIDIC contracts are the most widely used standard forms of contract for international engineering and construction projects Provides a clear and comprehensive guide to the 2017 FIDIC Red, Yellow and Silver Books Written by a senior specialist lawyer and member of the FIDIC 2017 Updates Task Group responsible for writing the new contracts Accessible to those with little or no familiarity with FIDIC contracts The 2017 FIDIC Contracts is an important guide for anyone engaged in international projects, including employers, contractors, engineers, lawyers, suppliers and project financiers/sponsors.
Download or read book FIDIC Silver Book written by Jakob B. Sørensen and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The FIDIC Forms of Contract written by Nael G. Bunni and published by John Wiley & Sons. This book was released on 2013-02-05 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: In September 1999, FIDIC introduced its new Suite of Contracts, which included a “new” Red, Yellow, Silver and Green forms of contract. The “new” Red Book was intended to replace the 1992 fourth edition of the Red Book, with the ambition that its use would cease with time. This ambition has not materialised and is unlikely to do so in the future. Despite the importance of the 1999 Forms, there has been very little published on the new concepts adopted in them and how they interact with the previous forms. This important work considers these aspects together with the many developments affecting the fourth edition of the Red Book that have taken place since 1997, when the second edition of this book was published, and relates them to key contracting issues. It is written by a chartered engineer, conciliator and international arbitrator with wide experience in the use of the FIDIC Forms and in the various dispute resolution mechanisms specified in them. Important features of this book include: · background and concepts of the various forms of contract; · a detailed comparison of the wording of the1999 three main forms, which although similar in nature; it nevertheless significantly differs in certain areas where the three forms diverge due to their intended purpose; · analysis of the rights and obligations of the parties involved in the contract and the allocation of risks concerned; · a range of ‘decision tree’ charts, analysing the main features of the 1992 Red Book, including risks, indemnities and insurances, claims and counterclaims, variations, procedure for claims, programme and delay, suspension, payments and certificates, dispute resolution mechanisms, and dispute boards; · a much enlarged discussion of the meaning of “claim” and “dispute” and the types of claim with a discussion of the Notice provision in the 1999 forms of contract for the submittal of claims by a contractor and by an employer; · the FIDIC scheme of indemnities and insurance requirements; and the methods of dispute resolution provided by the various forms of contract; and · five new chapters in this third edition, the first four chapters deal with each of the 1999 forms and the fifth chapter is confined to the topic of Dispute Boards.
Download or read book FIDIC Conditions of Contract for Design Build and Operate Projects written by International Federation of Consulting Engineers and published by . This book was released on 2008 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book FIDIC A Guide for Practitioners written by Axel-Volkmar Jaeger and published by Springer Science & Business Media. This book was released on 2009-11-11 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1999, a suite of three new conditions of contract was published by FIDIC, following the basic structure and wording harmonised and updated around the previous FIDIC Design-Build and Turnkey Contract (the 1992 ‘‘Orange Book’’). These conditions, known as the ‘‘FIDIC rainbow, were the Conditions of C- tract for: l Construction, the so-called Red Book, for works designed by the Employer l Plant and Design-Build, the so-called Yellow Book, for works designed by the Contractor l EPC/Turnkey Projects, the so-called Silver Book, for works designed by the Contractor The ?rst is intended for construction works where the Employer is responsible for the design, as for per the previous so-called Red Book 4th Edition (1987), with an important role for the Engineer. The other two conditions of contract are intended for situations when the Contractor is responsible for the design. The Plant and Design-Build Contract has the traditional Engineer while the EPC/Turnkey Contract has a two-party arran- ment, generally with an Employer’s Representative as one of the parties.
Download or read book Conditions of Contract for Design build and Turnkey written by Fédération internationale des ingénieurs-conseils and published by . This book was released on 1995 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt: The terms of the Conditions of Contract for Design - Build and Turnkey have been prepared by the Federation Internationale des Ingenieurs Conseils (FIDIC) and are recommended for general use for the purpose of the design and construction of works where tenders are invited on an international basis; with minor modifications, the Conditions are also suitable for use on domestic contracts.
Download or read book Construction Claims and Responses written by Andy Hewitt and published by John Wiley & Sons. This book was released on 2016-03-22 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical, step-by-step guide on how to prepare and respond to construction claims. Everyone involved in the preparation or review of construction claims should have this book to hand. The book examines the different types of claim common to construction contracts and presents a step-by-step guide to demonstrate the process of building up a fully detailed claim submission. It includes advice on: Contract administration for claims and claims avoidance. Identifying the various types of claim. The key points for an effective claim or response document. The essential elements to be included in a claim or response. Extension of time claims. Claims for additional payment. Principles of delay analysis. Quantum calculations. Responses and determinations to achieve agreement and avoid disputes. A note on dispute boards. The advice given in the book is supported by worked examples of typical claims and responses with sample wording. The book includes a foreword by Roger Knowles, who has this to say: “The book is without a doubt fully comprehensive and goes though the preparation of a claim from A to Z. I have no hesitation in recommending it to students, beginners, those involved on a day-to-day basis with time and cost on projects, as well as the seasoned claims consultants”. This book is suitable for contracts managers, commercial managers, project managers, quantity surveyors, engineers and architects. A practical, step-by-step guide on how to prepare and respond to construction claims. Everyone involved in the preparation or review of construction claims should have this book to hand. The book examines the different types of claim common to construction contracts and presents a step-by-step guide to demonstrate the process of building up a fully detailed claim submission. It includes advice on: Contract administration for claims and claims avoidance. Identifying the various types of claim. The key points for an
Download or read book Understanding FIDIC written by Kelvin Hughes and published by Routledge. This book was released on 2020-12-20 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding FIDIC explains in simple and practical terms what is often seen as a very complex range of international engineering and construction contracts. Covering the FIDIC 2017 Red, Yellow and Silver Books (referred to as "The Rainbow Suite"), the book gives an overview of all three contracts, including coverage of changes between the 1999 contracts and the present 2017 suite. FIDIC contracts are widely used as far afield as Europe, the Middle East, Asia and Australia, and this book provides a practical yet thorough guide to the key elements that practitioners preparing and administering these contracts would need to be aware of. In his approachable and readable style, Kelvin Hughes covers: The obligations and responsibilities of the Employer, the Employer’s Representative, the Engineer and the Contractor Quality and Defects Liability Design Responsibility and Liability Variations, Measurement and Payment Procedures Progress, Delays, Extensions of Time and Completion Suspension and Termination Insurances Employer’s and Contractor’s Claims The Dispute Avoidance/Adjudication Board and the Resolution of Disputes Tendering Anyone working with FIDIC contracts whether as the Employer, Employer’s Representative, Engineer or Contractor will benefit greatly from this easy-to-read guide to the Rainbow Suite. Students on professional courses or researching the contracts for project work will also find this book extremely useful.
Download or read book The ICE Conditions of Contract written by Brian Eggleston and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ICE Conditions continues to be the dominant form of contract for civil engineering, despite the growing importance of the New Engineering Contract. The Seventh Edition of the ICE Conditions, published in 1999, introduced a number of changes, including: incorporating some of the concepts of the Latham Report amending certain provisions of the Sixth Edition which had attracted criticism rectifying conspicuous omissions from the text of earlier editions of the contract correcting small errors and faults from the previous edition modernising certain provisions and terms Brian Eggleston, whose previous book on the ICE Conditions was described as 'likely to become the authoritative reference source for the Sixth Edition', examines the contract clause by clause from a practical and legal viewpoint. There is extensive coverage of case law. Written by an experienced civil engineer and recognized authority on construction contracts, this book is an essential guide.
Download or read book International Construction Contract Law written by Lukas Klee and published by John Wiley & Sons. This book was released on 2018-10-22 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt: The updated second edition of the practical guide to international construction contract law The revised second edition of International Construction Contract Law is a comprehensive book that offers an understanding of the legal and managerial aspects of large international construction projects. This practical resource presents an introduction to the global construction industry, reviews the basics of construction projects and examines the common risks inherent in construction projects. The author — an expert in international construction contracts — puts the focus on FIDIC standard forms and describes their use within various legal systems. This important text contains also a comparison of other common standard forms such as NEC, AIA and VOB, and explains how they are used in a global context. The revised edition of International Construction Contract Law offers additional vignettes on current subjects written by international panel of numerous contributors. Designed to be an accessible resource, the book includes a basic dictionary of construction contract terminology, many sample letters for Claim Management and a wealth of examples and case studies that offer helpful aids for construction practitioners. The second edition of the text includes: • Updated material in terms of new FIDIC and NEC Forms published in 2017 • Many additional vignettes that clearly exemplify the concepts presented within the text • Information that is appropriate for a global market, rather than oriented to any particular legal system • The essential tools that were highlighted the first edition such as sample letters, dictionary and more • A practical approach to the principles of International Construction Contract Law and construction contract management. Does not get bogged down with detailed legal jargon Written for consulting engineers, lawyers, clients, developers, contractors and construction managers worldwide, the second edition of International Construction Contract Law offers an essential guide to the legal and managerial aspects of large international construction projects.
Download or read book A Contractor s Guide to the FIDIC Conditions of Contract written by Michael D. Robinson and published by John Wiley & Sons. This book was released on 2011-02-16 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide will help the contractor’s staff overcome some of the difficulties encountered on a typical international contract using FIDIC forms. The majority of FIDIC-based contracts use the Red Book (Conditions of Contract for Construction), so this book concentrates on the use of those particular forms. Supplementary comments are included in Appendix C for the Yellow Book (Plant & Design-Build) recommended for use where the contractor has a design responsibility. The Contractor is represented on site by the Contractor’s Representative who carries the overall responsibility for all the Contractor’s on-site activities. In order to provide guidance to the Contractor’s Representative and his staff, this book is divided into five sections: A summarized general review of the Red Book from the Contractor’s perspective. A review of the activities and duties of the Contractor’s Representative in the same clause sequencing as they appear in the Red Book. A summary of these activities and duties but arranged in order of their likely time sequence on site. This has the added intention of providing the Contractor’s Representative with a means of ensuring that documents are not only properly provided to the Employer and Engineer, but most importantly that they are provided within the time limits specified in the Contract. A selection of model letters is provided which make reference to the various clauses of the contract requiring the Contractor to make submissions to the Employer or Engineer. Various appendices. The guide is not intended to be a review of the legal aspects of FIDIC- based contracts; legal advice should be obtained as and when necessary, particularly if the Contractor has little or no knowledge of the local law. Armed on site with a copy of The Contractor and the FIDIC Contract, the Contractor’s Representative will be more able to avoid contractual problems rather than spend considerable time and energy resolving those problems once they have arisen.
Download or read book An Employer s and Engineer s Guide to the FIDIC Conditions of Contract written by Michael D. Robinson and published by John Wiley & Sons. This book was released on 2013-04-22 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: When all parties involved in the construction process fully understand their roles and are able to anticipate potential points of conflict, disputes and delays will be minimised. The Employer’s and Engineer’s Guide to the FIDIC Conditions of Contract sets out the essential administrative requirements of a FIDIC based contract by reference to the FIDIC 1999 Red Book. The obligations and duties of the Employer and the Engineer are identified and discussed. Potential pitfalls are highlighted and likely consequences pointed out. The importance of the Employer’s role in the preparation of tenders, which fully reflect his requirements and duties and obligations arising in the execution of the works, is emphasised. The key role of the Engineer in the effective administration of contracts after award is examined and commentary provided. Included in the guide are a number of appendices, including model letters which will be of value to less experienced staff (particularly those whose mother-tongue is not the English language). Engineers, quantity surveyors and project managers engaged in the contractual administration of international projects using FIDIC forms of contract will find the concise guidance in simple and jargon-free language provided here invaluable. This, together with the author’s earlier book, Contractor’s Guide to the FIDIC Conditions of Contract - which describes the duties, rights and responsibilities of the Contractor – represents the totality of supervision, design and execution of construction projects executed under the FIDIC Conditions of Contract. This book’s companion website offers invaluable resources to freely download, adapt and use: Model letters for use by the Employer Model letters for use by the Contractor Sample Interim Payment Certificate Model Form for Submissions to the Engineer Model Form of Engineer’s Order for Varied Works Model Form of Daywork/Daily Record Sheets
Download or read book FIDIC Red Book written by Jakob B. Sørensen and published by . This book was released on 2019-03-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Construction Contracts written by William Godwin and published by John Wiley & Sons. This book was released on 2012-12-12 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many large construction projects, such as those in the Middle East or Asia Pacific, are international in scope with a range of contractors and subcontractors signing contracts for delivery of specified work or services. The contractual situation in these instances may be complex and potentially includes a range of standard and bespoke contractual arrangements. In addition, the parties to these contracts may be based in different parts of the world, and are often working to different legal systems and understandings. This can lead to confusion in the understanding, interpretation and execution of a given contract. International Construction Contracts provides concise and practical guidance to those involved in the negotiation and management of international construction and engineering contracts. It sets out in clear, straightforward language the main features of construction contracts and international dispute resolution procedures. It ensures the reader is aware of the issues that might arise on the contractual side of their project so that they may better protect their party's interests. Many of the features and points discussed are illustrated by reference to the popular FIDIC contracts and the book includes a commentary on the two most widely used FIDIC design-build forms, the Yellow and Silver Books. Also included in the book is a fully worked example of a typical ICC arbitration from start to finish, with "pleadings", a detailed case narrative and commentary on events, and an example arbitration award. The ICC and SIAC arbitration rules are also provided. Written for construction professionals, the book will be of great interest to engineers, architects, project managers, quantity surveyors, contract managers and contract administrators working on international projects.
Download or read book Understanding the FIDIC Red and Yellow Books written by Jeremy Glover and published by . This book was released on 2018 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book FIDIC Contracts Law and Practice written by Ellis Baker and published by CRC Press. This book was released on 2013-07-31 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt: FIDIC Contracts: Law and Practice is sure to become the leading industry standard guide to using the FIDIC forms, and is the only book to date which deals with the whole suites of contracts, including the new gold book for Design, Build and Operate projects. The White & Case work is outstanding in its detailed consideration and treatment of the legal aspects of the interpretation and application of the Conditions, touching on many points that most people would not have encountered. Humphrey LLoyd, International Construction Law Review [2010] ICLR 386
