Download or read book FICON Implementation Guide written by IBM Redbooks and published by IBM. This book was released on 2005-01-01 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book IBM Storage Networking c type FICON Implementation Guide written by William White and published by IBM Redbooks. This book was released on 2022-01-11 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: The next-generation IBM® c-type Directors and switches for IBM Storage Networking provides high-speed Fibre Channel (FC) and IBM Fibre Connection (IBM FICON®) connectivity from the IBM Z® platform to the storage area network (SAN) core. It enables enterprises to rapidly deploy high-density virtualized servers with the dual benefit of higher bandwidth and consolidation. This IBM Redpaper Redbooks publication helps administrators understand how to implement or migrate to an IBM c-type SAN environment. It provides an overview of the key hardware and software products, and it explains how to install, configure, monitor, tune, and troubleshoot your SAN environment.

Download or read book Fibre Connection Planning and Implementation Guide written by and published by . This book was released on 2012 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book FICON Native Implementation and Reference Guide written by and published by . This book was released on 2002 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book FICON Planning and Implementation Guide written by and published by Vervante. This book was released on 2009 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This IBM Redbooks publication covers the planning, implementation, and management of IBM System z FICON environments. It discusses the FICON and Fibre Channel architectures, terminology, and supported topologies. The book focuses on the hardware installation and the software definitions that are needed to provide connectivity to FICON environments. You will find configuration examples required to support FICON control units, FICON Channel-to-Channel (FCTC), and FICON Directors. It also discusses utilities and commands that are useful for monitoring and managing the FICON environment"--Resource description p.

Download or read book IBM S 390 FICON Implementation Guide written by and published by . This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ficon Native Implementation and Reference Guide written by Ibm Redbooks and published by . This book was released on 2001 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book FICON Native Implementation and Reference Guide written by IBM Redbooks and published by IBM. This book was released on 2002-01-01 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book System z End to End Extended Distance Guide written by Frank Kyne and published by IBM Redbooks. This book was released on 2014-03-06 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication will help you design and manage an end-to-end, extended distance connectivity architecture for IBM System z®. This solution addresses your requirements now, and positions you to make effective use of new technologies in the future. Many enterprises implement extended distance connectivity in a silo manner. However, effective extended distance solutions require the involvement of different teams within an organization. Typically there is a network group, a storage group, a systems group, and possibly other teams. The intent of this publication is to help you design and manage a solution that will provide for all of your System z extended distance needs in the most effective and flexible way possible. This book introduces an approach to help plan, optimize, and maintain all of the moving parts of the solution together.

Download or read book IBM PowerVM Virtualization Introduction and Configuration written by Scott Vetter and published by IBM Redbooks. This book was released on 2015-11-24 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication provides an introduction to PowerVMTM virtualization technologies on Power System servers. PowerVM is a combination of hardware, firmware, and software that provides CPU, network, and disk virtualization. These are the main virtualization technologies: POWER7, POWER6, and POWER5 hardware POWER Hypervisor Virtual I/O Server Though the PowerVM brand includes partitioning, management software, and other offerings, this publication focuses on the virtualization technologies that are part of the PowerVM Standard and Enterprise Editions. This publication is also designed to be an introduction guide for system administrators, providing instructions for these tasks: Configuration and creation of partitions and resources on the HMC Installation and configuration of the Virtual I/O Server Creation and installation of virtualized partitions Examples using AIX, IBM i, and Linux This edition has been updated with the latest updates available and an improved content organization.

Download or read book IBM z14 Configuration Setup written by Octavian Lascu and published by IBM Redbooks. This book was released on 2017-09-25 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication helps you install, configure, and maintain the IBM z14. The z14 offers new functions that require a comprehensive understanding of the available configuration options. This book presents configuration setup scenarios, and describes implementation examples in detail. This publication is intended for systems engineers, hardware planners, and anyone who needs to understand IBM Z configuration and implementation. Readers should be generally familiar with current IBM Z technology and terminology. For more information about the functions of the z14, see IBM z14 Technical Introduction, SG24-8450 and IBM z14 Technical Guide, SG24-8451.

Download or read book IBM z14 Model ZR1 Configuration Setup written by Octavian Lascu and published by IBM Redbooks. This book was released on 2019-11-19 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication helps you install, configure, and maintain the IBM z14® Model ZR1 (Machine Type 3907). The z14 ZR1 offers new functions that require a comprehensive understanding of the available configuration options. This book presents configuration setup scenarios and describes implementation examples in detail. This publication is intended for systems engineers, hardware planners, and anyone who needs to understand IBM Z® configuration and implementation. Readers should be generally familiar with current IBM Z technology and terminology. For more information about the functions of the z14 Model ZR1, see IBM z14 Model ZR1 Technical Introduction, SG24-8550, and IBM z14 Model ZR1 Technical Guide, SG24-8651.

Download or read book IBM TS7700 Release 4 2 Guide written by Larry Coyne and published by IBM Redbooks. This book was released on 2019-04-19 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication covers IBM TS7700 R4.2. The IBM TS7700 is part of a family of IBM Enterprise tape products. This book is intended for system architects and storage administrators who want to integrate their storage systems for optimal operation. Building on over 20 years of virtual tape experience, the TS7760 now supports the ability to store virtual tape volumes in an object store. The TS7700 has supported off loading to physical tape for over two decades. Off loading to physical tape behind a TS7700 is utilized by hundreds of organizations around the world. Using the same hierarchical storage techniques, the TS7700 can also off load to object storage. Given object storage is cloud based and accessible from different regions, the TS7760 Cloud Storage Tier support essentially allows the cloud to be an extension of the grid. As of the release of this document, the TS7760C supports the ability to off load to IBM Cloud Object Storage as well as Amazon S3. To learn about the TS7760 cloud storage tier function, planning, implementation, best practices, and support see IBM Redpaper IBM TS7760 R4.2 Cloud Storage Tier Guide, redp-5514 at: http://www.redbooks.ibm.com/abstracts/redp5514.html The IBM TS7700 offers a modular, scalable, and high-performance architecture for mainframe tape virtualization for the IBM Z® environment. It is a fully integrated, tiered storage hierarchy of disk and tape. This storage hierarchy is managed by robust storage management microcode with extensive self-management capability. It includes the following advanced functions: Improved reliability and resiliency Reduction in the time that is needed for the backup and restore process Reduction of services downtime that is caused by physical tape drive and library outages Reduction in cost, time, and complexity by moving primary workloads to virtual tape More efficient procedures for managing daily backup and restore processing Infrastructure simplification through reduction of the number of physical tape libraries, drives, and media TS7700 delivers the following new capabilities: TS7760C supports the ability to off load to IBM Cloud Object Storage as well as Amazon S3 8-way Grid Cloud consisting of any generation of TS7700 Synchronous and asynchronous replication Tight integration with IBM Z and DFSMS policy management Optional Transparent Cloud Tiering Optional integration with physical tape Cumulative 16Gb FICON throughput up to 4.8GB/s 8 IBM Z hosts view up to 496 8 equivalent devices Grid access to all data independent of where it exists The TS7760T writes data by policy to physical tape through attachment to high-capacity, high-performance IBM TS1150 and IBM TS1140 tape drives installed in an IBM TS4500 or TS3500 tape library. The TS7760 models are based on high-performance and redundant IBM POWER8® technology. They provide improved performance for most IBM Z tape workloads when compared to the previous generations of IBM TS7700.

Download or read book IBM TS7700 Release 5 2 2 Guide written by Larry Coyne and published by IBM Redbooks. This book was released on 2022-07-07 with total page 1076 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication covers IBM TS7700 R5.2. The IBM TS7700 is part of a family of IBM Enterprise tape products. This book is intended for system architects and storage administrators who want to integrate their storage systems for optimal operation. Building on 25 years of experience, the R5.2 release includes many features that enable improved performance, usability, and security. Highlights include IBM TS7700 Advanced Object Store, an all flash TS7770, grid resiliency enhancements, and Logical WORM retention. By using the same hierarchical storage techniques, the TS7700 (TS7770 and TS7760) can also off load to object storage. Because object storage is cloud-based and accessible from different regions, the TS7700 Cloud Storage Tier support essentially allows the cloud to be an extension of the grid. As of this writing, the TS7700C supports the ability to off load to IBM Cloud® Object Storage, Amazon S3, and RSTOR. This publication explains features and concepts that are specific to the IBM TS7700 as of release R5.2. The R5.2 microcode level provides IBM TS7700 Cloud Storage Tier enhancements, IBM DS8000® Object Storage enhancements, Management Interface dual control security, and other smaller enhancements. The R5.2 microcode level can be installed on the IBM TS7770 and IBM TS7760 models only. Note: The latest Release 5.2 was split into two phases: R5.2 Phase 1 (also referred to as and ) R5.2 Phase 2 ( and R) TS7700 provides tape virtualization for the IBM z environment. Off loading to physical tape behind a TS7700 is used by hundreds of organizations around the world. Tape virtualization can help satisfy the following requirements in a data processing environment. New and existing capabilities of the TS7700 5.2.2 release includes the following highlights: Eight-way Grid Cloud, which consists of up to three generations of TS7700 Synchronous and asynchronous replication of virtual tape and TCT objects Grid access to all logical volume and object data that is independent of where it exists An all-flash TS7770 option for improved performance Full Advanced Object Store Grid Cloud support of DS8000 Transparent Cloud Tier Full AES256 encryption for data that is in-flight and at-rest Tight integration with IBM Z® and DFSMS policy management DS8000 Object Store AES256 in-flight encryption and compression Regulatory compliance through Logical WORM and LWORM Retention support Cloud Storage Tier support for archive, logical volume version, and disaster recovery Optional integration with physical tape 16 Gb IBM FICON® throughput that exceeds 5 GBps per TS7700 cluster Grid Resiliency Support with Control Unit Initiated Reconfiguration (CUIR) support IBM Z hosts view up to 3,968 common devices per TS7700 grid TS7770 Cache On-demand feature that is based capacity licensing TS7770 support of SSD within the VED server The TS7700T writes data by policy to physical tape through attachment to high-capacity, high-performance IBM TS1160, IBM TS1150, and IBM TS1140 tape drives that are installed in an IBM TS4500 or TS3500 tape library. The TS7770 models are based on high-performance and redundant IBM POWER9TM technology. They provide improved performance for most IBM Z tape workloads when compared to the previous generations of IBM TS7700.

Download or read book IBM z15 Configuration Setup written by Octavian Lascu and published by IBM Redbooks. This book was released on 2020-08-04 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication helps you install, configure, and maintain the IBM z15TM (machine types 8561 and 8562) systems. The z15 systems offers new functions that require a comprehensive understanding of the available configuration options. This book presents configuration setup scenarios, and describes implementation examples in detail. This publication is intended for systems engineers, hardware planners, and anyone who needs to understand IBM Z® configuration and implementation. Readers should be familiar with IBM Z technology and terminology. For more information about the functions of the z15 systems, see IBM z15 Technical Introduction, SG24-8850, IBM z15 (8561) Technical Guide, SG24-8851 and IBM z15 (8562) Technical Guide, SG24-8852.

Download or read book OSA Express Implementation Guide written by Mike Ebbers and published by IBM Redbooks. This book was released on 2014-06-04 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication will help you to install, tailor, and configure the Open Systems Adapter (OSA) features that are available on IBM zEnterprise® servers. It focuses on the hardware installation and the software definitions that are necessary to provide connectivity to LAN environments. This information will help you with planning and system setup. This book also includes helpful utilities and commands for monitoring and managing the OSA features. This information will be helpful to systems engineers, network administrators, and system programmers who plan for and install OSA features. The reader is expected to have a good understanding of IBM System z® hardware, Hardware Configuration Definition (HCD) or the input/output configuration program (IOCP), Open Systems Adapter Support Facility (OSA/SF), Systems Network Architecture/Advanced Peer-to-Peer Networking (SNA/APPN), and TCP/IP protocol.

Download or read book IBM zEnterprise BC12 Technical Guide written by Octavian Lascu and published by IBM Redbooks. This book was released on 2015-03-03 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: The popularity of the Internet and the affordability of information technology (IT) hardware and software have resulted in an explosion dramatic increase in the number of applications, architectures, and platforms. Workloads have changed. Many applications, including mission-critical ones, are deployed on a variety of platforms, and the IBM® System z® design has adapted to this change. It takes into account a wide range of factors, including compatibility and investment protection, to match the IT requirements of an enterprise. This IBM Redbooks® publication provides information about the IBM zEnterprise® BC12 (zBC12), an IBM scalable mainframe server. IBM is taking a revolutionary approach by integrating separate platforms under the well-proven System z hardware management capabilities, while extending System z qualities of service to those platforms. The zEnterprise System consists of the zBC12 central processor complex, the IBM zEnterprise Unified Resource Manager, and the IBM zEnterprise BladeCenter® Extension (zBX). The zBC12 is designed with improved scalability, performance, security, resiliency, availability, and virtualization. The zBC12 provides the following improvements over its predecessor, the IBM zEnterprise 114 (z114): Up to a 36% performance boost per core running at 4.2 GHz Up to 58% more capacity for traditional workloads Up to 62% more capacity for Linux workloads The zBX infrastructure works with the zBC12 to enhance System z virtualization and management through an integrated hardware platform that spans mainframe, IBM POWER7®, and IBM System x® technologies. The federated capacity from multiple architectures of the zEnterprise System is managed as a single pool of resources, integrating system and workload management across the environment through the Unified Resource Manager. This book provides an overview of the zBC12 and its functions, features, and associated software support. Greater detail is offered in areas relevant to technical planning. This book is intended for systems engineers, consultants, planners, and anyone who wants to understand zEnterprise System functions and plan for their usage. It is not intended as an introduction to mainframes. Readers are expected to be generally familiar with existing IBM System z technology and terminology.