Download or read book Fundamentals of Industrial Electronics written by Bogdan M. Wilamowski and published by CRC Press. This book was released on 2018-10-03 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Industrial Electronics Handbook, Second Edition combines traditional and newer, more specialized knowledge that will help industrial electronics engineers develop practical solutions for the design and implementation of high-power applications. Embracing the broad technological scope of the field, this collection explores fundamental areas, including analog and digital circuits, electronics, electromagnetic machines, signal processing, and industrial control and communications systems. It also facilitates the use of intelligent systems—such as neural networks, fuzzy systems, and evolutionary methods—in terms of a hierarchical structure that makes factory control and supervision more efficient by addressing the needs of all production components. Enhancing its value, this fully updated collection presents research and global trends as published in the IEEE Transactions on Industrial Electronics Journal, one of the largest and most respected publications in the field. Fundamentals of Industrial Electronics covers the essential areas that form the basis for the field. This volume presents the basic knowledge that can be applied to the other sections of the handbook. Topics covered include: Circuits and signals Devices Digital circuits Digital and analog signal processing Electromagnetics Other volumes in the set: Power Electronics and Motor Drives Control and Mechatronics Industrial Communication Systems Intelligent Systems
Download or read book FET Fundamentals written by Buck Engineering Technical Writers Staff and published by . This book was released on 1988-01-01 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of MOSFET written by Prasun Barua and published by Prasun Barua. This book was released on with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: Welcome to Fundamentals of MOSFET! This is a nonfiction science book which contains various topics on fundamentals of MOSFET. The most common type of field-effect transistor is the metal-oxide semiconductor field-effect transistor (MOSFET) which is based on the voltage applied to the gate terminal, they act as electrical switches and amplifiers, controlling the amount of electricity that can flow between the source and drain terminals. Most discrete transistors, digital logic, integrated circuits (IC), and thin-film transistor (TFT) LCDs are based on MOSFET technology. They are the workhorse of modern electronics and the most manufactured item in history. A MOSFET is made up of four terminals: the source, drain, gate, and base. The base is typically connected to the source terminal. Positive or negative doped semiconductors are used for the substrate, source, and drain. MOSFET can control the amount of electricity that can flow between their source and drain terminals, based on the voltage applied to their gate terminal. This can be used as a switch to turn another circuit or other transistors on and off, forming the foundation of digital logic. They can also be used as signal amplifiers and to vary the amount of conductivity in analog circuits. Power MOSFETs are used in circuits to control high current or power. Single transistors are frequently packaged as discrete components. These are frequently found in switching power supplies and motor controllers. This is the first edition of the book. Thanks for reading the book.
Download or read book Fundamentals of RF and Microwave Transistor Amplifiers written by Inder Bahl and published by John Wiley & Sons. This book was released on 2009-06-17 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive and Up-to-Date Treatment of RF and Microwave Transistor Amplifiers This book provides state-of-the-art coverage of RF and microwave transistor amplifiers, including low-noise, narrowband, broadband, linear, high-power, high-efficiency, and high-voltage. Topics covered include modeling, analysis, design, packaging, and thermal and fabrication considerations. Through a unique integration of theory and practice, readers will learn to solve amplifier-related design problems ranging from matching networks to biasing and stability. More than 240 problems are included to help readers test their basic amplifier and circuit design skills-and more than half of the problems feature fully worked-out solutions. With an emphasis on theory, design, and everyday applications, this book is geared toward students, teachers, scientists, and practicing engineers who are interested in broadening their knowledge of RF and microwave transistor amplifier circuit design.
Download or read book engineering fundamentals written by and published by Pearson South Africa. This book was released on 2007 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Tunnel Field Effect Transistors written by Sneh Saurabh and published by CRC Press. This book was released on 2016-10-26 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last decade, there has been a great deal of interest in TFETs. To the best authors’ knowledge, no book on TFETs currently exists. The proposed book provides readers with fundamental understanding of the TFETs. It explains the interesting characteristics of the TFETs, pointing to their strengths and weaknesses, and describes the novel techniques that can be employed to overcome these weaknesses and improve their characteristics. Different tradeoffs that can be made in designing TFETs have also been highlighted. Further, the book provides simulation example files of TFETs that could be run using a commercial device simulator.
Download or read book Fundamentals of Tunnel Field Effect Transistors written by Sneh Saurabh and published by CRC Press. This book was released on 2016-10-26 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last decade, there has been a great deal of interest in TFETs. To the best authors’ knowledge, no book on TFETs currently exists. The proposed book provides readers with fundamental understanding of the TFETs. It explains the interesting characteristics of the TFETs, pointing to their strengths and weaknesses, and describes the novel techniques that can be employed to overcome these weaknesses and improve their characteristics. Different tradeoffs that can be made in designing TFETs have also been highlighted. Further, the book provides simulation example files of TFETs that could be run using a commercial device simulator.
Download or read book Materials Fundamentals of Gate Dielectrics written by Alexander A. Demkov and published by Springer Science & Business Media. This book was released on 2006-05-24 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents materials fundamentals of novel gate dielectrics that are being introduced into semiconductor manufacturing to ensure the continuous scalling of the CMOS devices. This is a very fast evolving field of research so we choose to focus on the basic understanding of the structure, thermodunamics, and electronic properties of these materials that determine their performance in device applications. Most of these materials are transition metal oxides. Ironically, the d-orbitals responsible for the high dielectric constant cause sever integration difficulties thus intrinsically limiting high-k dielectrics. Though new in the electronics industry many of these materials are wel known in the field of ceramics, and we describe this unique connection. The complexity of the structure-property relations in TM oxides makes the use of the state of the art first-principles calculations necessary. Several chapters give a detailed description of the modern theory of polarization, and heterojunction band discontinuity within the framework of the density functional theory. Experimental methods include oxide melt solution calorimetry and differential scanning calorimetry, Raman scattering and other optical characterization techniques, transmission electron microscopy, and x-ray photoelectron spectroscopy. Many of the problems encounterd in the world of CMOS are also relvant for other semiconductors such as GaAs. A comprehensive review of recent developments in this field is thus also given. The book should be of interest to those actively engaged in the gate dielectric research, and to graduate students in Materials Science, Materials Physics, Materials Chemistry, and Electrical Engineering.
Download or read book Designing with Field effect Transistors written by Edwin S. Oxner and published by McGraw-Hill Companies. This book was released on 1990 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: projetos eletronicos utilizando transistor de efeito de campo (fet).
Download or read book Electronic Devices and Circuit Fundamentals written by Dale R. Patrick and published by CRC Press. This book was released on 2023-05-08 with total page 971 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores many fundamental topics in a basic and easy-to-understand manner. It, and the accompanying DC-AC Electrical Fundamentals by the same co-authors, have been developed using a classic textbook – Electricity and Electronics: A Survey (5th Edition) by Patrick and Fardo – as a framework. Both new books have been structured using the same basic sequence and organization of the textbook as previous editions. This book has been expanded to 23 chapters, further simplifying content and providing a more comprehensive coverage of fundamental content. The content has been continually updated and revised through new editions and by external reviewers throughout the years. Additional quality checks to ensure technical accuracy, clarity and coverage of content have always been an area of focus. Each edition of the text has been improved through the following features: Improved and updated text content. Improved usage of illustrations and photos. Use of color to add emphasis and clarify content.
Download or read book Fundamentals of Electronics written by Thomas F. Schubert Jr. and published by Springer Nature. This book was released on 2022-06-01 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, Oscillators and Advanced Electronics Topics, is the final book of a larger, four-book set, Fundamentals of Electronics. It consists of five chapters that further develop practical electronic applications based on the fundamental principles developed in the first three books. This book begins by extending the principles of electronic feedback circuits to linear oscillator circuits. The second chapter explores non-linear oscillation, waveform generation, and waveshaping. The third chapter focuses on providing clean, reliable power for electronic applications where voltage regulation and transient suppression are the focus. Fundamentals of communication circuitry form the basis for the fourth chapter with voltage-controlled oscillators, mixers, and phase-lock loops being the primary focus. The final chapter expands upon early discussions of logic gate operation (introduced in Book 1) to explore gate speed and advanced gate topologies. Fundamentals of Electronics has been designed primarily for use in upper division courses in electronics for electrical engineering students and for working professionals. Typically such courses span a full academic year plus an additional semester or quarter. As such, Oscillators and Advanced Electronics Topics and the three companion book of Fundamentals of Electronics form an appropriate body of material for such courses.
Download or read book Electronics Fundamentals and Applications written by D. Chattopadhyay and published by New Age International. This book was released on 2008 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Solid State Electronics written by Chih-Tang Sah and published by World Scientific Publishing Company. This book was released on 1991-10-30 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is perhaps the most comprehensive undergraduate textbook on the fundamental aspects of solid state electronics. It presents basic and state-of-the-art topics on materials physics, device physics, and basic circuit building blocks not covered by existing textbooks on the subject. Each topic is introduced with a historical background and motivations of device invention and circuit evolution. Fundamental physics is rigorously discussed with minimum need of tedious algebra and advanced mathematics. Another special feature is a systematic classification of fundamental mechanisms not found even in advanced texts. It bridges the gap between solid state device physics covered here with what students have learnt in their first two years of study. Used very successfully in a one-semester introductory core course for electrical and other engineering, materials science and physics junior students, the second part of each chapter is also used in an advanced undergraduate course on solid state devices. The inclusion of previously unavailable analyses of the basic transistor digital circuit building blocks and cells makes this an excellent reference for engineers to look up fundamental concepts and data, design formulae, and latest devices such as the GeSi heterostructure bipolar transistors. This book is also available as a set with Fundamentals of Solid-State Electronics — Study Guide and Fundamentals of Solid-State Electronics — Solution Manual.
Download or read book Fundamentals of Electroceramics written by R. K. Pandey and published by John Wiley & Sons. This book was released on 2019-01-07 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first textbook to provide in-depth treatment of electroceramics with emphasis on applications in microelectronics, magneto-electronics, spintronics, energy storage and harvesting, sensors and detectors, magnetics, and in electro-optics and acousto-optics Electroceramics is a class of ceramic materials used primarily for their electrical properties. This book covers the important topics relevant to this growing field and places great emphasis on devices and applications. It provides sufficient background in theory and mathematics so that readers can gain insight into phenomena that are unique to electroceramics. Each chapter has its own brief introduction with an explanation of how the said content impacts technology. Multiple examples are provided to reinforce the content as well as numerous end-of-chapter problems for students to solve and learn. The book also includes suggestions for advanced study and key words relevant to each chapter. Fundamentals of Electroceramics: Materials, Devices and Applications offers eleven chapters covering: 1.Nature and types of solid materials; 2. Processing of Materials; 3. Methods for Materials Characterization; 4. Binding Forces in Solids and Essential Elements of Crystallography; 5. Dominant Forces and Effects in Electroceramics; 6. Coupled Nonlinear Effects in Electroceramics; 7. Elements of Semiconductor; 8. Electroceramic Semiconductor Devices; 9. Electroceramics and Green Energy; 10.Electroceramic Magnetics; and 11. Electro-optics and Acousto-optics. Provides an in-depth treatment of electroceramics with the emphasis on fundamental theoretical concepts, devices, and applications with focus on non-linear dielectrics Emphasizes applications in microelectronics, magneto-electronics, spintronics, energy storage and harvesting, sensors and detectors, magnetics and in electro-optics and acousto-optics Introductory textbook for students to learn and make an impact on technology Motivates students to get interested in research on various aspects of electroceramics at undergraduate and graduate levels leading to a challenging career path. Includes examples and problem questions within every chapter that prepare students well for independent thinking and learning. Fundamentals of Electroceramics: Materials, Devices and Applications is an invaluable academic textbook that will benefit all students, professors, researchers, scientists, engineers, and teachers of ceramic engineering, electrical engineering, applied physics, materials science, and engineering.
Download or read book Fundamentals of RF and Microwave Techniques and Technologies written by Hans L. Hartnagel and published by Springer Nature. This book was released on 2023-07-28 with total page 1554 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increase of consumer, medical and sensors electronics using radio frequency (RF) and microwave (MW) circuits has implications on overall performances if design is not robust and optimized for a given applications. The current and later generation communication systems and Internet of Thing (IoT) demand for robust electronic circuits with optimized performance and functionality, but low cost, size, and power consumption. As a result, there is a need for a textbook that provides a comprehensive treatment of the subject. This book provides state-of-the-art coverage of RF and Microwave Techniques and Technologies, covers important topics: transmission-line theory, passive and semiconductor devices, active and passive microwave circuits and receiver systems, as well as antennas, noise and digital signal modulation schemes. With an emphasis on theory, design, and applications, this book is targeted to students, teachers, scientists, and practicing design engineers who are interested in broadening their knowledge of RF and microwave electronic circuit design. Readers will also benefit from a unique integration of theory and practice, provides the readers a solid understanding of the RF and microwave concepts, active and passive components, antenna, and modulation schemes. Readers will learn to solve common design problems ranging from selection of components, matching networks to biasing and stability, and digital modulation techniques. More importantly, it provides basic understanding in the analysis and design of RF and microwave circuits in a manner that is practiced in industry. This make sure that the know-how learned in this book can be effortlessly and straightway put into practice without any obstacles.
Download or read book Automotive Electronics Design Fundamentals written by Najamuz Zaman and published by Springer. This book was released on 2015-08-19 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the topology behind automotive electronics architectures and examines how they can be profoundly augmented with embedded controllers. These controllers serve as the core building blocks of today’s vehicle electronics. Rather than simply teaching electrical basics, this unique resource focuses on the fundamental concepts of vehicle electronics architecture, and details the wide variety of Electronic Control Modules (ECMs) that enable the increasingly sophisticated "bells & whistles" of modern designs. A must-have for automotive design engineers, technicians working in automotive electronics repair centers and students taking automotive electronics courses, this guide bridges the gap between academic instruction and industry practice with clear, concise advice on how to design and optimize automotive electronics with embedded controllers.
Download or read book Fundamentals of III V Semiconductor MOSFETs written by Serge Oktyabrsky and published by Springer Science & Business Media. This book was released on 2010-03-16 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of III-V Semiconductor MOSFETs presents the fundamentals and current status of research of compound semiconductor metal-oxide-semiconductor field-effect transistors (MOSFETs) that are envisioned as a future replacement of silicon in digital circuits. The material covered begins with a review of specific properties of III-V semiconductors and available technologies making them attractive to MOSFET technology, such as band-engineered heterostructures, effect of strain, nanoscale control during epitaxial growth. Due to the lack of thermodynamically stable native oxides on III-V's (such as SiO2 on Si), high-k oxides are the natural choice of dielectrics for III-V MOSFETs. The key challenge of the III-V MOSFET technology is a high-quality, thermodynamically stable gate dielectric that passivates the interface states, similar to SiO2 on Si. Several chapters give a detailed description of materials science and electronic behavior of various dielectrics and related interfaces, as well as physics of fabricated devices and MOSFET fabrication technologies. Topics also include recent progress and understanding of various materials systems; specific issues for electrical measurement of gate stacks and FETs with low and wide bandgap channels and high interface trap density; possible paths of integration of different semiconductor materials on Si platform.
