Download or read book Embedded Generation written by Nicholas Jenkins and published by IET. This book was released on 2000-06-30 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, intended for both students and practising engineers, addresses all the issues pertinent to the implementation of embedded generation.
Download or read book Electric Power Distribution Handbook written by Thomas Allen Short and published by CRC Press. This book was released on 2018-09-03 with total page 900 pages. Available in PDF, EPUB and Kindle. Book excerpt: Of the "big three" components of electrical infrastructure, distribution typically gets the least attention. In fact, a thorough, up-to-date treatment of the subject hasn’t been published in years, yet deregulation and technical changes have increased the need for better information. Filling this void, the Electric Power Distribution Handbook delivers comprehensive, cutting-edge coverage of the electrical aspects of power distribution systems. The first few chapters of this pragmatic guidebook focus on equipment-oriented information and applications such as choosing transformer connections, sizing and placing capacitors, and setting regulators. The middle portion discusses reliability and power quality, while the end tackles lightning protection, grounding, and safety. The Second Edition of this CHOICE Award winner features: 1 new chapter on overhead line performance and 14 fully revised chapters incorporating updates from several EPRI projects New sections on voltage optimization, arc flash, and contact voltage Full-color illustrations throughout, plus fresh bibliographic references, tables, graphs, methods, and statistics Updates on conductor burndown, fault location, reliability programs, tree contacts, automation, and grounding and personnel protection Access to an author-maintained support website, distributionhandbook.com, with problems sets, resources, and online apps An unparalleled source of tips and solutions for improving performance, the Electric Power Distribution Handbook, Second Edition provides power and utility engineers with the technical information and practical tools they need to understand the applied science of distribution.
Download or read book Integration of Distributed Generation in the Power System written by Math H. J. Bollen and published by John Wiley & Sons. This book was released on 2011-08-09 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: The integration of new sources of energy like wind power, solar-power, small-scale generation, or combined heat and power in the power grid is something that impacts a lot of stakeholders: network companies (both distribution and transmission), the owners and operators of the DG units, other end-users of the power grid (including normal consumers like you and me) and not in the least policy makers and regulators. There is a lot of misunderstanding about the impact of DG on the power grid, with one side (including mainly some but certainly not all, network companies) claiming that the lights will go out soon, whereas the other side (including some DG operators and large parks of the general public) claiming that there is nothing to worry about and that it's all a conspiracy of the large production companies that want to protect their own interests and keep the electricity price high. The authors are of the strong opinion that this is NOT the way one should approach such an important subject as the integration of new, more environmentally friendly, sources of energy in the power grid. With this book the authors aim to bring some clarity to the debate allowing all stakeholders together to move to a solution. This book will introduce systematic and transparent methods for quantifying the impact of DG on the power grid.
Download or read book Integration of Distributed Generation in the Power System written by Math H. J. Bollen and published by John Wiley & Sons. This book was released on 2011-08-04 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: The integration of new sources of energy like wind power, solar-power, small-scale generation, or combined heat and power in the power grid is something that impacts a lot of stakeholders: network companies (both distribution and transmission), the owners and operators of the DG units, other end-users of the power grid (including normal consumers like you and me) and not in the least policy makers and regulators. There is a lot of misunderstanding about the impact of DG on the power grid, with one side (including mainly some but certainly not all, network companies) claiming that the lights will go out soon, whereas the other side (including some DG operators and large parks of the general public) claiming that there is nothing to worry about and that it's all a conspiracy of the large production companies that want to protect their own interests and keep the electricity price high. The authors are of the strong opinion that this is NOT the way one should approach such an important subject as the integration of new, more environmentally friendly, sources of energy in the power grid. With this book the authors aim to bring some clarity to the debate allowing all stakeholders together to move to a solution. This book will introduce systematic and transparent methods for quantifying the impact of DG on the power grid.
Download or read book Distributed Generation written by Dattatraya Gaonkar and published by BoD – Books on Demand. This book was released on 2010-02-01 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the recent years the electrical power utilities have undergone rapid restructuring process worldwide. Indeed, with deregulation, advancement in technologies and concern about the environmental impacts, competition is particularly fostered in the generation side, thus allowing increased interconnection of generating units to the utility networks. These generating sources are called distributed generators (DG) and defined as the plant which is directly connected to distribution network and is not centrally planned and dispatched. These are also called embedded or dispersed generation units. The rating of the DG systems can vary between few kW to as high as 100 MW. Various new types of distributed generator systems, such as microturbines and fuel cells in addition to the more traditional solar and wind power are creating significant new opportunities for the integration of diverse DG systems to the utility. Interconnection of these generators will offer a number of benefits such as improved reliability, power quality, efficiency, alleviation of system constraints along with the environmental benefits. Unlike centralized power plants, the DG units are directly connected to the distribution system; most often at the customer end. The existing distribution networks are designed and operated in radial configuration with unidirectional power flow from centralized generating station to customers. The increase in interconnection of DG to utility networks can lead to reverse power flow violating fundamental assumption in their design. This creates complexity in operation and control of existing distribution networks and offers many technical challenges for successful introduction of DG systems. Some of the technical issues are islanding of DG, voltage regulation, protection and stability of the network. Some of the solutions to these problems include designing standard interface control for individual DG systems by taking care of their diverse characteristics, finding new ways to/or install and control these DG systems and finding new design for distribution system. DG has much potential to improve distribution system performance. The use of DG strongly contributes to a clean, reliable and cost effective energy for future. This book deals with several aspects of the DG systems such as benefits, issues, technology interconnected operation, performance studies, planning and design. Several authors have contributed to this book aiming to benefit students, researchers, academics, policy makers and professionals. We are indebted to all the people who either directly or indirectly contributed towards the publication of this book.
Download or read book Power Electronic Converter Configuration and Control for DC Microgrid Systems written by Jens Bo Holm-Nielsen and published by MDPI. This book was released on 2020-11-13 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: The DC/AC microgrid system is a crucial empowering technology for the integration of various types of renewable energy sources (RES) accompanied by a smart control approach to enhance the system reliability and efficiency. This book presents cutting-edge technology developments and recent investigations performed with the help of power electronics. Large-scale renewable energy integration presents challenges and issues for power grids. In particular, these issues include microgrid adaption to RES, AC machines, the new configuration of AC/DC converters, and electrification of domestic needs with optimal cost expenses from domestic standalone microgrids. Furthermore, this book elaborates cutting-edge developments in electric vehicle fast charging configuration, battery management, and control schemes with renewable energies through hardware-in-loop testing and validation for performance durability in real-time application. Overall, the book covers the diverse field of microgrids, allowing readers to adopt new technologies and prepare for future power demands with sustainable green engineering.
Download or read book Smart Power Distribution Systems written by Qiang Yang and published by Academic Press. This book was released on 2018-10-17 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Power Distribution Systems: Control, Communication, and Optimization explains how diverse technologies work to build and maintain smart grids around the globe. Yang, Yang and Li present the most recent advances in the control, communication and optimization of smart grids and provide unique insight into power system control, sensing and communication, and optimization technologies. The book covers control challenges for renewable energy and smart grids, communication in smart power systems, and optimization challenges in smart power system operations. Each area discussed focuses on the scientific innovations relating to the approaches, methods and algorithmic solutions presented. Readers will develop sound knowledge and gain insights into the integration of renewable energy generation in smart power distribution systems. - Presents the latest technological advances in electric power distribution networks, with a particular focus on methodologies, approaches and algorithms - Provides insights into the most recent research and developments from expert contributors from across the world - Presents a clear and methodical structure that guides the reader through discussion and analysis, providing unique insights and sound knowledge along the way
Download or read book Handbook of Distributed Generation written by Ramesh Bansal and published by Springer. This book was released on 2017-03-07 with total page 813 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features extensive coverage of all Distributed Energy Generation technologies, highlighting the technical, environmental and economic aspects of distributed resource integration, such as line loss reduction, protection, control, storage, power electronics, reliability improvement, and voltage profile optimization. It explains how electric power system planners, developers, operators, designers, regulators and policy makers can derive many benefits with increased penetration of distributed generation units into smart distribution networks. It further demonstrates how to best realize these benefits via skillful integration of distributed energy sources, based upon an understanding of the characteristics of loads and network configuration.
Download or read book Electrical Distribution Networks written by Nouredine Hadjsaïd and published by John Wiley & Sons. This book was released on 2013-01-22 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamental aspects of the new generation of electrical distribution grids, taking as its starting point the opportunities that exist for restructuring existing infrastructure. It emphasizes the incorporation of renewable energy sources into the distribution grid and the need for a technological evolution towards the implementation of smartgrids. The book is organized into two parts: the first part analyzes the integration of distributed energy sources into the distribution grid and the impact of these sources on grid operation. After a general description of the general characteristics of distribution grids and renewable energy sources, it then analyzes the economics of electrical energy distribution networks and presents the impact of these sources on grid operation. The second part of the book then analyzes the various functions which allow for safe operation of the grid and realization of the path towards real world application of smartgrids.
Download or read book Advanced Intelligent Systems for Sustainable Development AI2SD 2018 written by Mostafa Ezziyyani and published by Springer. This book was released on 2019-03-06 with total page 1021 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes the outcomes of the International Conference on Advanced Intelligent Systems for Sustainable Development (AI2SD-2018), held in Tangier, Morocco on July 12–14, 2018. Presenting the latest research in the field of computing sciences and information technology, it discusses new challenges and provides valuable insights into the field, the goal being to stimulate debate, and to promote closer interaction and interdisciplinary collaboration between researchers and practitioners. Though chiefly intended for researchers and practitioners in advanced information technology management and networking, the book will also be of interest to those engaged in emerging fields such as data science and analytics, big data, internet of things, smart networked systems, artificial intelligence, expert systems and cloud computing.
Download or read book Smart Grid Fundamentals written by Radian Belu and published by CRC Press. This book was released on 2022-02-18 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: The textbook provides a comprehensive overview of smart grids, their role in the development of electricity systems, as well as issues and problems related to smart grid evolution, operation, management, control, protection, entities, and components. The book is divided in eleven chapters, covering core topics such as energy, and environmental issues, basic of power systems, and introduction to renewable energy, distributed generation and energy storage, smart grid challenges, benefits, and divers, smart power transmission and distribution. It includes chapters focusing on smart grid communication, power flow analysis, smart grid design tools, energy management and microgrids. Each chapter ends with several practical and advanced problems that instilling critical thinking and applies to industrial applications. The book can be used as an introductory and basic textbook, reference and training resource by engineers, students, faculty, and interested readers to gain the essential knowledge of the power and energy systems, smart grid fundamentals, concepts and features, as well as the main energy technologies, including how they work and operate, characteristics, and they are evaluated and selected for specific applications.
Download or read book Control and Automation of Electrical Power Distribution Systems written by James Northcote-Green and published by CRC Press. This book was released on 2017-12-19 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Implementing the automation of electric distribution networks, from simple remote control to the application of software-based decision tools, requires many considerations, such as assessing costs, selecting the control infrastructure type and automation level, deciding on the ambition level, and justifying the solution through a business case. Control and Automation of Electric Power Distribution Systems addresses all of these issues to aid you in resolving automation problems and improving the management of your distribution network. Bringing together automation concepts as they apply to utility distribution systems, this volume presents the theoretical and practical details of a control and automation solution for the entire distribution system of substations and feeders. The fundamentals of this solution include depth of control, boundaries of control responsibility, stages of automation, automation intensity levels, and automated device preparedness. To meet specific performance goals, the authors discuss distribution planning, performance calculations, and protection to facilitate the selection of the primary device, associated secondary control, and fault indicators. The book also provides two case studies that illustrate the business case for distribution automation (DA) and methods for calculating benefits, including the assessment of crew time savings. As utilities strive for better economies, DA, along with other tools described in this volume, help to achieve improved management of the distribution network. Using Control and Automation of Electric Power Distribution Systems, you can embark on the automation solution best suited for your needs.
Download or read book Voltage Control and Protection in Electrical Power Systems written by Sandro Corsi and published by Springer. This book was released on 2015-06-19 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the author’s twenty years of experience, this book shows the practicality of modern, conceptually new, wide area voltage control in transmission and distribution smart grids, in detail. Evidence is given of the great advantages of this approach, as well as what can be gained by new control functionalities which modern technologies now available can provide. The distinction between solutions of wide area voltage regulation (V-WAR) and wide area voltage protection (V-WAP) are presented, demonstrating the proper synergy between them when they operate on the same power system as well as the simplicity and effectiveness of the protection solution in this case. The author provides an overview and detailed descriptions of voltage controls, distinguishing between generalities of underdeveloped, on-field operating applications and modern and available automatic control solutions, which are as yet not sufficiently known or perceived for what they are: practical, high-performance and reliable solutions. At the end of this thorough and complex preliminary analysis the reader sees the true benefits and limitations of more traditional voltage control solutions, and gains an understanding and appreciation of the innovative grid voltage control and protection solutions here proposed; solutions aimed at improving the security, efficiency and quality of electrical power system operation around the globe. Voltage Control and Protection in Electrical Power Systems: from System Components to Wide Area Control will help to show engineers working in electrical power companies and system operators the significant advantages of new control solutions and will also interest academic control researchers studying ways of increasing power system stability and efficiency.
Download or read book Operation of Distributed Energy Resources in Smart Distribution Networks written by Kazem Zare and published by Academic Press. This book was released on 2018-06-05 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Operation of Distributed Energy Resources in Smart Distribution Networks defines the barriers and challenges of smart distribution networks, ultimately proposing optimal solutions for addressing them. The book considers their use as an important part of future electrical power systems and their ability to improve the local flexibility and reliability of electrical systems. It carefully defines the concept as a radial network with a cluster of distributed energy generations, various types of loads, and energy storage systems. In addition, the book details how the huge penetration of distributed energy resources and the intermittent nature of renewable generations may cause system problems. Readers will find this to be an important resource that analyzes and introduces the features and problems of smart distribution networks from different aspects. - Integrates different types of elements, including electrical vehicles, demand response programs, and various renewable energy sources in distribution networks - Proposes optimal operational models for the short-term performance and scheduling of a distribution network - Discusses the uncertainties of renewable resources and intermittent load in the decision-making process for distribution networks
Download or read book Electric Power Systems Research written by Ying-Yi Hong and published by MDPI. This book was released on 2018-04-06 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Electric Power Systems Research" that was published in Energies
Download or read book Power System Protection in Smart Grid Environment written by Ramesh Bansal and published by CRC Press. This book was released on 2019-01-15 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: With distributed generation interconnection power flow becoming bidirectional, culminating in network problems, smart grids aid in electricity generation, transmission, substations, distribution and consumption to achieve a system that is clean, safe (protected), secure, reliable, efficient, and sustainable. This book illustrates fault analysis, fuses, circuit breakers, instrument transformers, relay technology, transmission lines protection setting using DIGsILENT Power Factory. Intended audience is senior undergraduate and graduate students, and researchers in power systems, transmission and distribution, protection system broadly under electrical engineering.
Download or read book Data Analytics for Renewable Energy Integration written by Wei Lee Woon and published by Springer. This book was released on 2015-12-14 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes revised selected papers from the third ECML PKDD Workshop on Data Analytics for Renewable Energy Integration, DARE 2015, held in Porto, Portugal, in September 2015. The 10 papers presented in this volume were carefully reviewed and selected for inclusion in this book.