Download or read book Feedback Systems Input output Properties written by C.A. Desoer and published by Elsevier. This book was released on 2012-12-02 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Feedback Systems: Input-output Properties deals with the basic input-output properties of feedback systems. Emphasis is placed on multiinput-multioutput feedback systems made of distributed subsystems, particularly continuous-time systems. Topics range from memoryless nonlinearities to linear systems, the small gain theorem, and passivity. Norms and general theorems are also considered. This book is comprised of six chapters and begins with an overview of a few simple facts about feedback systems and simple examples of nonlinear systems that illustrate the important distinction between the questions of existence, uniqueness, continuous dependence, and boundedness with respect to bounded input and output. The next chapter describes a number of useful properties of norms and induced norms and of normed spaces. Several theorems are then presented, along with the main results concerning linear systems. These results are used to illustrate the applications of the small gain theorem to different classes of systems. The final chapter outlines the framework necessary to discuss passivity and demonstrate the applications of the passivity theorem. This monograph will be a useful resource for mathematically inclined engineers interested in feedback systems, as well as undergraduate engineering students.
Download or read book On the Input output Properties of Convolution Feedback Systems written by Frank Maria Callier and published by . This book was released on 1972 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book FEEDBACK SYSTEMS INPUT OUTPUT PROPERTIES BY C A DESOER UND M VIDYASAGAR written by Charles A. Desoer and published by . This book was released on 1975 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Feedback Systems written by Karl Johan Åström and published by Princeton University Press. This book was released on 2021-02-02 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The essential introduction to the principles and applications of feedback systems—now fully revised and expanded This textbook covers the mathematics needed to model, analyze, and design feedback systems. Now more user-friendly than ever, this revised and expanded edition of Feedback Systems is a one-volume resource for students and researchers in mathematics and engineering. It has applications across a range of disciplines that utilize feedback in physical, biological, information, and economic systems. Karl Åström and Richard Murray use techniques from physics, computer science, and operations research to introduce control-oriented modeling. They begin with state space tools for analysis and design, including stability of solutions, Lyapunov functions, reachability, state feedback observability, and estimators. The matrix exponential plays a central role in the analysis of linear control systems, allowing a concise development of many of the key concepts for this class of models. Åström and Murray then develop and explain tools in the frequency domain, including transfer functions, Nyquist analysis, PID control, frequency domain design, and robustness. Features a new chapter on design principles and tools, illustrating the types of problems that can be solved using feedback Includes a new chapter on fundamental limits and new material on the Routh-Hurwitz criterion and root locus plots Provides exercises at the end of every chapter Comes with an electronic solutions manual An ideal textbook for undergraduate and graduate students Indispensable for researchers seeking a self-contained resource on control theory
Download or read book Biomolecular Feedback Systems written by Domitilla Del Vecchio and published by Princeton University Press. This book was released on 2014-10-26 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an accessible introduction to the principles and tools for modeling, analyzing, and synthesizing biomolecular systems. It begins with modeling tools such as reaction-rate equations, reduced-order models, stochastic models, and specific models of important core processes. It then describes in detail the control and dynamical systems tools used to analyze these models. These include tools for analyzing stability of equilibria, limit cycles, robustness, and parameter uncertainty. Modeling and analysis techniques are then applied to design examples from both natural systems and synthetic biomolecular circuits. In addition, this comprehensive book addresses the problem of modular composition of synthetic circuits, the tools for analyzing the extent of modularity, and the design techniques for ensuring modular behavior. It also looks at design trade-offs, focusing on perturbations due to noise and competition for shared cellular resources. Featuring numerous exercises and illustrations throughout, Biomolecular Feedback Systems is the ideal textbook for advanced undergraduates and graduate students. For researchers, it can also serve as a self-contained reference on the feedback control techniques that can be applied to biomolecular systems. Provides a user-friendly introduction to essential concepts, tools, and applications Covers the most commonly used modeling methods Addresses the modular design problem for biomolecular systems Uses design examples from both natural systems and synthetic circuits Solutions manual (available only to professors at press.princeton.edu) An online illustration package is available to professors at press.princeton.edu
Download or read book Feedback Control Theory written by John C. Doyle and published by Courier Corporation. This book was released on 2013-04-09 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: An excellent introduction to feedback control system design, this book offers a theoretical approach that captures the essential issues and can be applied to a wide range of practical problems. Its explorations of recent developments in the field emphasize the relationship of new procedures to classical control theory, with a focus on single input and output systems that keeps concepts accessible to students with limited backgrounds. The text is geared toward a single-semester senior course or a graduate-level class for students of electrical engineering. The opening chapters constitute a basic treatment of feedback design. Topics include a detailed formulation of the control design program, the fundamental issue of performance/stability robustness tradeoff, and the graphical design technique of loopshaping. Subsequent chapters extend the discussion of the loopshaping technique and connect it with notions of optimality. Concluding chapters examine controller design via optimization, offering a mathematical approach that is useful for multivariable systems.
Download or read book The Analysis of Feedback Systems written by Jan C. Willems and published by Mit Press. This book was released on 1970-12-01 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph is an attempt to develop further and refine methods based on input -output descriptions for analyzing feedback systems. Contrary to previous work in this area, the treatment heavily emphasizes and exploits the causality of the operators involved. This brings the work into closer contact with the theory of dynamical systems and automata.
Download or read book Dynamics of Feedback Systems written by A. I. Mees and published by John Wiley & Sons. This book was released on 1981 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stability and Stabilization of Nonlinear Systems written by Iasson Karafyllis and published by Springer Science & Business Media. This book was released on 2011-04-02 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, the subject of nonlinear control systems analysis has grown rapidly and this book provides a simple and self-contained presentation of their stability and feedback stabilization which enables the reader to learn and understand major techniques used in mathematical control theory. In particular: the important techniques of proving global stability properties are presented closely linked with corresponding methods of nonlinear feedback stabilization; a general framework of methods for proving stability is given, thus allowing the study of a wide class of nonlinear systems, including finite-dimensional systems described by ordinary differential equations, discrete-time systems, systems with delays and sampled-data systems; approaches to the proof of classical global stability properties are extended to non-classical global stability properties such as non-uniform-in-time stability and input-to-output stability; and new tools for stability analysis and control design of a wide class of nonlinear systems are introduced. The presentational emphasis of Stability and Stabilization of Nonlinear Systems is theoretical but the theory’s importance for concrete control problems is highlighted with a chapter specifically dedicated to applications and with numerous illustrative examples. Researchers working on nonlinear control theory will find this monograph of interest while graduate students of systems and control can also gain much insight and assistance from the methods and proofs detailed in this book.
Download or read book Quantitative Feedback Design of Linear and Nonlinear Control Systems written by Oded Yaniv and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quantitative Feedback Design of Linear and Nonlinear Control Systems is a self-contained book dealing with the theory and practice of Quantitative Feedback Theory (QFT). The author presents feedback synthesis techniques for single-input single-output, multi-input multi-output linear time-invariant and nonlinear plants based on the QFT method. Included are design details and graphs which do not appear in the literature, which will enable engineers and researchers to understand QFT in greater depth. Engineers will be able to apply QFT and the design techniques to many applications, such as flight and chemical plant control, robotics, space, vehicle and military industries, and numerous other uses. All of the examples were implemented using Matlab® Version 5.3; the script file can be found at the author's Web site. QFT results in efficient designs because it synthesizes a controller for the exact amount of plant uncertainty, disturbances and required specifications. Quantitative Feedback Design of Linear and Nonlinear Control Systems is a pioneering work that illuminates QFT, making the theory - and practice - come alive.
Download or read book Diagnostic Reliablility and Control Systems written by Cornelius T. Leondes and published by CRC Press. This book was released on 2000-09-11 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technical committee on mechatronics formed by the International Federation for the Theory of Machines and Mechanisms, in Prague, Czech Republic, adopted the following definition for the term: Mechatronics is the synergistic combination of precision mechanical engineering, electronic control and systems thinking in the design products and manufa
Download or read book The Control Systems Handbook written by William S. Levine and published by CRC Press. This book was released on 2018-10-03 with total page 1800 pages. Available in PDF, EPUB and Kindle. Book excerpt: At publication, The Control Handbook immediately became the definitive resource that engineers working with modern control systems required. Among its many accolades, that first edition was cited by the AAP as the Best Engineering Handbook of 1996. Now, 15 years later, William Levine has once again compiled the most comprehensive and authoritative resource on control engineering. He has fully reorganized the text to reflect the technical advances achieved since the last edition and has expanded its contents to include the multidisciplinary perspective that is making control engineering a critical component in so many fields. Now expanded from one to three volumes, The Control Handbook, Second Edition organizes cutting-edge contributions from more than 200 leading experts. The third volume, Control System Advanced Methods, includes design and analysis methods for MIMO linear and LTI systems, Kalman filters and observers, hybrid systems, and nonlinear systems. It also covers advanced considerations regarding — Stability Adaptive controls System identification Stochastic control Control of distributed parameter systems Networks and networked controls As with the first edition, the new edition not only stands as a record of accomplishment in control engineering but provides researchers with the means to make further advances. Progressively organized, the first two volumes in the set include: Control System Fundamentals Control System Applications
Download or read book Frequency Domain Analysis and Design of Distributed Control Systems written by Yu-Ping Tian and published by John Wiley & Sons. This book was released on 2012-08-24 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a unified frequency-domain method for the analysis of distributed control systems. The following important topics are discussed by using the proposed frequency-domain method: (1) Scalable stability criteria of networks of distributed control systems; (2) Effect of heterogeneous delays on the stability of a network of distributed control system; (3) Stability of Internet congestion control algorithms; and (4) Consensus in multi-agent systems. This book is ideal for graduate students in control, networking and robotics, as well as researchers in the fields of control theory and networking who are interested in learning and applying distributed control algorithms or frequency-domain analysis methods.
Download or read book Realization and Modelling in System Theory written by A.C. Ran and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the first of the three volume publication containing the proceedings of the 1989 International Symposium on the Mathematical Theory of Networks and Systems (MTNS-89), which was held in Amsterdam, The Netherlands, June 19-23, 1989. The International Symposia MTNS focus attention on problems from system and control theory, circuit theory and signal processing, which, in general, require application of sophisticated mathematical tools, such as from function and operator theory, linear algebra and matrix theory, differential and algebraic geometry. The interaction between advanced mathematical methods and practical engineering problems of circuits, systems and control, which is typical for MTNS, turns out to be most effective and is, as these proceedings show, a continuing source of exciting advances. The first volume contains invited papers and a large selection of other symposium presentations on the general theory of deterministic and stochastic systems with an emphasis on realization and modelling. A wide variety of recent results on approximate realization and system identification, stochastic dynamical systems, discrete event systems,- o systems, singular systems and nonstandard models IS presented. Preface vi Also a few papers on applications in hydrology and hydraulics are included. The titles of the two other volumes are: Robust Control of Linear Sys tems and Nonlinear Control (volume 2) and Signal Processing. Scatter ing and Operator Theory. and Numerical Methods (volume 3). The Editors are most grateful to the about 300 reviewers for their help in the refereeing process. The Editors thank Ms. G. Bijleveld and Ms.
Download or read book CONTROL SYSTEMS ROBOTICS AND AUTOMATION Volume III written by Heinz Unbehauen and published by EOLSS Publications. This book was released on 2009-10-11 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Control Systems, Robotics, and Automation is a component of the global Encyclopedia of Life Support Systems EOLSS, which is an integrated compendium of twenty one Encyclopedias. This 22-volume set contains 240 chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It is the only publication of its kind carrying state-of-the-art knowledge in the fields of Control Systems, Robotics, and Automation and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.
Download or read book Robust Control Engineering written by Mario Garcia-Sanz and published by CRC Press. This book was released on 2017-06-26 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book thoroughly covers the fundamentals of the QFT robust control, as well as practical control solutions, for unstable, time-delay, non-minimum phase or distributed parameter systems, plants with large model uncertainty, high-performance specifications, nonlinear components, multi-input multi-output characteristics or asymmetric topologies. The reader will discover practical applications through a collection of fifty successful, real world case studies and projects, in which the author has been involved during the last twenty-five years, including commercial wind turbines, wastewater treatment plants, power systems, satellites with flexible appendages, spacecraft, large radio telescopes, and industrial manufacturing systems. Furthermore, the book presents problems and projects with the popular QFT Control Toolbox (QFTCT) for MATLAB, which was developed by the author.
Download or read book European Control Conference 1995 written by and published by European Control Association. This book was released on 1995-09-05 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the European Control Conference 1995, Rome, Italy 5-8 September 1995
