Download or read book Feasibility Analysis and Design of a Fault Tolerant Computing System written by Huseyin B. Eken and published by . This book was released on 2001-03-01 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this thesis is to analyze and determine the feasibility of implementing a fault tolerant computing system that is able to function in the presence of radiation induced Single Event Upsets (SEU) by using the Triple Modular Redundancy (TMR) technique with 64-bit Commercial-Off-The- Shelf (COTS) microprocessors. Due to the radiation environment in space, electronic devices must be designed to tolerate the radiation effects. While there are radiation-hardened devices that can tolerate radiation effects, they offer lower performance and higher cost than COTS devices. On the other hand, COTS devices offer lower cost, orders of magnitude higher performance, shorter design time and better software availability and compatibility. However, COTS devices are susceptible to the radiation effects. In order to use COTS devices in space environment, a fault tolerance technique such as TMR needs to be implemented. This thesis presents the design and analysis of a TMR 64-bit COTS microprocessor implementation. The system incorporates three 64-bit microprocessors, the memory system including SRAM and PROM memory modules and the programmable logic devices that are used to implement the IMR technique. The validity of the design is verified by the timing analysis conducted on read and write operations.
Download or read book Design and Analysis of Reliable and Fault Tolerant Computer Systems written by Mostafa Abd-El-Barr and published by World Scientific. This book was released on 2006-12-15 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering both the theoretical and practical aspects of fault-tolerant mobile systems, and fault tolerance and analysis, this book tackles the current issues of reliability-based optimization of computer networks, fault-tolerant mobile systems, and fault tolerance and reliability of high speed and hierarchical networks. The book is divided into six parts to facilitate coverage of the material by course instructors and computer systems professionals. The sequence of chapters in each part ensures the gradual coverage of issues from the basics to the most recent developments. A useful set of references, including electronic sources, is listed at the end of each chapter. Contents:Fundamental Concepts in Fault Tolerance and Reliability AnalysisFault Modeling, Simulation and DiagnosisError Control and Self-Checking CircuitsFault Tolerance in Multiprocessor SystemsFault-Tolerant Routing in Multi-Computer NetworksFault Tolerance and Reliability in Hierarchical Interconnection NetworksFault Tolerance and Reliability of Computer NetworksFault Tolerance in High Speed Switching NetworksFault Tolerance in Distributed and Mobile Computing SystemsFault Tolerance in Mobile NetworksReliability and Yield Enhancement of VLSI/WSI CircuitsDesign of fault-tolerant Processor ArraysAlgorithm-Based Fault ToleranceSystem Level Diagnosis ISystem Level Diagnosis IIFault Tolerance and Reliability of RAID SystemsHigh Availability in Computer Systems Readership: Computer engineers, computer scientists, information scientists, graduate and senior undergraduate students in information science and computer engineering. Keywords:Fault Tolerance;Reliability;Availability;Fault Modeling;Fault Diagnosis;Network ReliabilityKey Features:Comprehensive coverage of issues in fault tolerance and reliability analysisSimple treatment of difficult issues via examples with figures, tables and graphs
Download or read book Design and Analysis of Fault tolerant Digital Systems written by Barry W. Johnson and published by . This book was released on 1989 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reliability of Computer Systems and Networks written by Martin L. Shooman and published by Wiley-Interscience. This book was released on 2002-01-18 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: With computers becoming embedded as controllers in everything from network servers to the routing of subway schedules to NASA missions, there is a critical need to ensure that systems continue to function even when a component fails. In this book, bestselling author Martin Shooman draws on his expertise in reliability engineering and software engineering to provide a complete and authoritative look at fault tolerant computing. He clearly explains all fundamentals, including how to use redundant elements in system design to ensure the reliability of computer systems and networks. Market: Systems and Networking Engineers, Computer Programmers, IT Professionals.
Download or read book Software Design for Resilient Computer Systems written by Igor Schagaev and published by Springer. This book was released on 2016-02-13 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the question of how system software should be designed to account for faults, and which fault tolerance features it should provide for highest reliability. The authors first show how the system software interacts with the hardware to tolerate faults. They analyze and further develop the theory of fault tolerance to understand the different ways to increase the reliability of a system, with special attention on the role of system software in this process. They further develop the general algorithm of fault tolerance (GAFT) with its three main processes: hardware checking, preparation for recovery, and the recovery procedure. For each of the three processes, they analyze the requirements and properties theoretically and give possible implementation scenarios and system software support required. Based on the theoretical results, the authors derive an Oberon-based programming language with direct support of the three processes of GAFT. In the last part of this book, they introduce a simulator, using it as a proof of concept implementation of a novel fault tolerant processor architecture (ERRIC) and its newly developed runtime system feature-wise and performance-wise. The content applies to industries such as military, aviation, intensive health care, industrial control, space exploration, etc.
Download or read book Development and Analysis of the Software Implemented Fault Tolerance SIFT Computer written by and published by . This book was released on 1984 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fault Tolerant Systems written by Israel Koren and published by Morgan Kaufmann. This book was released on 2020-09-01 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault-Tolerant Systems, Second Edition, is the first book on fault tolerance design utilizing a systems approach to both hardware and software. No other text takes this approach or offers the comprehensive and up-to-date treatment that Koren and Krishna provide. The book comprehensively covers the design of fault-tolerant hardware and software, use of fault-tolerance techniques to improve manufacturing yields, and design and analysis of networks. Incorporating case studies that highlight more than ten different computer systems with fault-tolerance techniques implemented in their design, the book includes critical material on methods to protect against threats to encryption subsystems used for security purposes. The text’s updated content will help students and practitioners in electrical and computer engineering and computer science learn how to design reliable computing systems, and how to analyze fault-tolerant computing systems. Delivers the first book on fault tolerance design with a systems approach Offers comprehensive coverage of both hardware and software fault tolerance, as well as information and time redundancy Features fully updated content plus new chapters on failure mechanisms and fault-tolerance in cyber-physical systems Provides a complete ancillary package, including an on-line solutions manual for instructors and PowerPoint slides
Download or read book Fault tolerant Computer System Design written by Dhiraj K. Pradhan and published by Prentice Hall. This book was released on 1996 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the ten years since the publication of the first edition of this book, the field of fault-tolerant design has broadened in appeal, particularly with its emerging application in distributed computing. This new edition specifically deals with this dynamically changing computing environment, incorporating new topics such as fault-tolerance in multiprocessor and distributed systems.
Download or read book Methods Models and Tools for Fault Tolerance written by Michael Butler and published by Springer. This book was released on 2009-03-03 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growing complexity of modern software systems increases the di?culty of ensuring the overall dependability of software-intensive systems. Complexity of environments, in which systems operate, high dependability requirements that systems have to meet, as well as the complexity of infrastructures on which they rely make system design a true engineering challenge. Mastering system complexity requires design techniques that support clear thinking and rigorous validation and veri?cation. Formal design methods help to achieve this. Coping with complexity also requires architectures that are t- erant of faults and of unpredictable changes in environment. This issue can be addressed by fault-tolerant design techniques. Therefore, there is a clear need of methods enabling rigorous modelling and development of complex fault-tolerant systems. This bookaddressessuchacuteissues indevelopingfault-tolerantsystemsas: – Veri?cation and re?nement of fault-tolerant systems – Integrated approaches to developing fault-tolerant systems – Formal foundations for error detection, error recovery, exception and fault handling – Abstractions, styles and patterns for rigorousdevelopment of fault tolerance – Fault-tolerant software architectures – Development and application of tools supporting rigorous design of depe- able systems – Integrated platforms for developing dependable systems – Rigorous approaches to speci?cation and design of fault tolerance in novel computing systems TheeditorsofthisbookwereinvolvedintheEU(FP-6)projectRODIN(R- orous Open Development Environment for Complex Systems), which brought together researchers from the fault tolerance and formal methods communi- 1 ties. In 2007 RODIN organized the MeMoT workshop held in conjunction with the Integrated Formal Methods 2007 Conference at Oxford University.
Download or read book The Evolution of Fault tolerant Computing written by William Caswell Carter and published by Springer. This book was released on 1987 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dependable Computing EDCC 2005 written by Mario Dal Cin and published by Springer. This book was released on 2005-03-31 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is always a special honor to chair the European Dependable Computing C- ference (EDCC). EDCC has become one of the well-established conferences in the ?eld of dependability in the European research area. Budapest was selected as the host of this conference due to its traditions in organizing international scienti?c events and its traditional role of serving as a meeting point between East and West. EDCC-5 was the ?fth in the series of these high-quality scienti?c conf- ences. In addition to the overall signi?cance of such a pan-European event, this year’s conference was a special one due to historic reasons. The roots of EDCC date back to the moment when the Iron Curtain fell. Originally, two groups of scientists from di?erent European countries in Western and Eastern Europe – who were active in research and education related to dependability created a – joint forum in order to merge their communities as early as in 1989. This trend has continued up to today. This year’s conference was the ?rst one where the overwhelming majority of the research groups belong to the family of European nations united in the European Union. During the past 16 years we observed that the same roots in all the professional, cultural and scienti?c senses led to a seamless integration of these research communities previously separated ar- ?cially for a long time. EDCC has become one of the main European platforms to exchange new - searchideasinthe?eldofdependability.
Download or read book Predictably Dependable Computing Systems written by Brian Randell and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rigorous Development of Complex Fault Tolerant Systems written by Michael Butler and published by Springer. This book was released on 2006-11-23 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together 19 papers focusing on the application of rigorous design techniques to the development of fault-tolerant, software-based systems. It is an outcome of the REFT 2005 Workshop on Rigorous Engineering of Fault-Tolerant Systems held in conjunction with the Formal Methods 2005 conference at Newcastle upon Tyne, UK, in July 2005.
Download or read book Space Station Systems written by and published by . This book was released on 1986 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fault Tolerance Techniques for High Performance Computing written by Thomas Herault and published by Springer. This book was released on 2015-07-01 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: This timely text presents a comprehensive overview of fault tolerance techniques for high-performance computing (HPC). The text opens with a detailed introduction to the concepts of checkpoint protocols and scheduling algorithms, prediction, replication, silent error detection and correction, together with some application-specific techniques such as ABFT. Emphasis is placed on analytical performance models. This is then followed by a review of general-purpose techniques, including several checkpoint and rollback recovery protocols. Relevant execution scenarios are also evaluated and compared through quantitative models. Features: provides a survey of resilience methods and performance models; examines the various sources for errors and faults in large-scale systems; reviews the spectrum of techniques that can be applied to design a fault-tolerant MPI; investigates different approaches to replication; discusses the challenge of energy consumption of fault-tolerance methods in extreme-scale systems.
Download or read book Measurement Modeling and Evaluation of Computing Systems and Dependability and Fault Tolerance written by Jens B. Schmitt and published by Springer. This book was released on 2012-03-08 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 16th International GI/ITG Conference on Measurement, Modeling and Evaluation of Computing Systems and Dependability and Fault Tolerance, MMB & DFT 2012, held in Kaiserslautern, Germany, in March 2012. The 16 revised full papers presented together with 5 tool papers and 5 selected workshop papers were carefully reviewed and selected from 54 submissions. MMB & DFT 2012 covers diverse aspects of performance and dependability evaluation of systems including networks, computer architectures, distributed systems, software, fault-tolerant and secure systems.
