Download or read book Public Health Effectiveness of the FDA 510 k Clearance Process written by Institute of Medicine and published by National Academies Press. This book was released on 2010-10-04 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Food and Drug Administration (FDA) is responsible for assuring that medical devices are safe and effective before they go on the market. As part of its assessment of FDA's premarket clearance process for medical devices, the IOM held a workshop June 14-15 to discuss how to best balance patient safety and technological innovation. This document summarizes the workshop.

Download or read book Medical Devices and the Public s Health written by Institute of Medicine and published by National Academies Press. This book was released on 2011-10-25 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Medical devices that are deemed to have a moderate risk to patients generally cannot go on the market until they are cleared through the FDA 510(k) process. In recent years, individuals and organizations have expressed concern that the 510(k) process is neither making safe and effective devices available to patients nor promoting innovation in the medical-device industry. Several high-profile mass-media reports and consumer-protection groups have profiled recognized or potential problems with medical devices cleared through the 510(k) clearance process. The medical-device industry and some patients have asserted that the process has become too burdensome and is delaying or stalling the entry of important new medical devices to the market. At the request of the FDA, the Institute of Medicine (IOM) examined the 510(k) process. Medical Devices and the Public's Health examines the current 510(k) clearance process and whether it optimally protects patients and promotes innovation in support of public health. It also identifies legislative, regulatory, or administrative changes that will achieve the goals of the 510(k) clearance process. Medical Devices and the Public's Health recommends that the U.S. Food and Drug Administration gather the information needed to develop a new regulatory framework to replace the 35-year-old 510(k) clearance process for medical devices. According to the report, the FDA's finite resources are best invested in developing an integrated premarket and postmarket regulatory framework.

Download or read book Innovation and Protection written by I. Glenn Cohen and published by Cambridge University Press. This book was released on 2022-04-07 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: A detailed analysis of the ethical, legal, and regulatory landscape of medical devices in the US and EU.

Download or read book Medical Devices Law and Regulation Answer Book written by Suzan Onel and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book FDA Regulatory Affairs written by Douglas J. Pisano and published by CRC Press. This book was released on 2008-08-11 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines harmonization of the US Federal Food, Drug, and Cosmetic Act with international regulations as they apply to human drug and device development, research, manufacturing, and marketing. The Second Edition focuses on the new drug approval process, cGMPs, GCPs, quality system compliance, and corresponding documentation requirements. Written in

Download or read book An Overview of FDA Regulated Products written by Eunjoo Pacifici and published by Academic Press. This book was released on 2018-06-13 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's challenge, especially for many newcomers to the regulated industry, is not necessarily to gather regulatory information, but to know how to interpret and apply it. The ability to discern what is important from what is not, and to interpret regulatory documents correctly, provides a valuable competitive advantage to any newcomer or established professional in this field. An Overview of FDA Regulated Products: From Drugs and Medical Devices to Food and Tobacco provides a valuable summary of the key information to unveil the meaning of critical, and often complex, regulatory concepts. Concise and easy to read with practical explanations, key points, summaries and case studies, this book highlights the regulatory processes involved in bringing an FDA regulated product from research and development to approval and market. Although the primary focus will be on the US system, this book also features global perspectives where appropriate. A valuable resource for students, professors and professionals, An Overview of FDA Regulated Products illustrates the most important elements and concepts so that the reader can focus on the critical issues and make the necessary connections to be successful. - Provides an overview of key regulatory requirements using a practical approach that features detailed discussions of hypothetical and real-world case studies in order to highlight the concepts and applications of regulations - Covers all FDA regulated products, including drugs, biologics, medical devices, cosmetics, foods, dietary supplements, cosmetics, veterinary products, tobacco and more in one single reference - Illustrates complex topics in a clear, succinct and engaging manner by breaking down technical terms and offering straightforward and easy to understand explanations

Download or read book FDA Regulatory Affairs written by David Mantus and published by CRC Press. This book was released on 2014-02-28 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: FDA Regulatory Affairs is a roadmap to prescription drug, biologics, and medical device development in the United States. Written in plain English, the concise and jargon-free text demystifies the inner workings of the US Food and Drug Administration (FDA) and facilitates an understanding of how the agency operates with respect to compliance and product approval, including clinical trial exemptions, fast track status, advisory committee procedures, and more. The Third Edition of this highly successful publication: Examines the harmonization of the US Federal Food, Drug, and Cosmetic Act with international regulations on human drug, biologics and device development, research, manufacturing, and marketing Includes contributions from experts at organizations such as the FDA, National Institutes of Health (NIH), and PAREXEL Focuses on the new drug application (NDA) process, cGMPs, GCPs, quality system compliance, and corresponding documentation requirements Provides updates to the FDA Safety and Innovation Act (FDASIA), incorporating pediatric guidelines and follow-on biologics regulations from the 2012 Prescription Drug User Fee Act (PDUFA) V Explains current FDA inspection processes, enforcement options, and how to handle FDA meetings and required submissions Co-edited by an industry leader (Mantus) and a respected academic (Pisano), FDA Regulatory Affairs, Third Edition delivers a compilation of the selected US laws and regulations as well as a straightforward commentary on the FDA product approval process that’s broadly useful to both business and academia.

Download or read book The FDA and Worldwide Quality System Requirements Guidebook for Medical Devices written by Amiram Daniel and published by Quality Press. This book was released on 2008-01-01 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: How have recent changes in domestic and international regulations affected quality management in the development and marketing of medical devices in the US and abroad? Consultants Daniel and Kimmelman take a close look at the Quality System Regulation (QsReg), the ISO 13485: 2003 standard and the ISO/TR 14969: 2004 guidance document as well as a number of US Food and Drug Administration (FDA) and Global Harmonization Task Force (GHTF) guidance documents. The authors provide extensive commentary and notes an update their material to include such topics as the incorporation of principles of risk management into the medical device organizations' quality management systems (QMSs) and considerations of combination products. Daniel and Kimmelman include full coverage of the QSReg requirements, descriptions of comparable requirements in the ISO documents, excerpts of the FDA's responses to the QSReg preamble and excerpts from FDA guidance documents related to QMSs.

Download or read book Medical Regulatory Affairs written by Jack Wong and published by CRC Press. This book was released on 2022-01-27 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook covers medical device regulatory systems in different countries, ISO standards for medical devices, clinical trial and regulatory requirements, and documentation for application. It is the first to cover the medical device regulatory affairs in Asia. Experts from influential international regulatory bodies, including the US Food and Drug Administration (FDA), UK Medicines and Healthcare Products Regulatory Agency, Japan Pharmaceuticals and Medical Devices Agency, Saudi Food and Drug Authority, Korea Testing Laboratory, Taiwan FDA, World Health Organization, Asian Harmonization Working Party, Regulatory Affairs Professionals Society, and British Standards Institution, have contributed to the book. Government bodies, the medical device industry, academics, students, and general readers will find the book immensely useful for understanding the global regulatory environment and in their research and development projects.

Download or read book Medical Device Design and Regulation written by Carl T. DeMarco and published by Quality Press. This book was released on 2011-01-01 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Promotion of FDA regulated Medical Products written by Joanne S. Hawana and published by . This book was released on 2018 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: Promotion of FDA-Regulated Medical Products is the update of the 2013 publication, FDA requirements for prescription drug promotion, by John Driscoll.

Download or read book Medical Device Development written by Jonathan S. Kahan and published by . This book was released on 2020 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rare Diseases and Orphan Products written by Institute of Medicine and published by National Academies Press. This book was released on 2011-04-03 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rare diseases collectively affect millions of Americans of all ages, but developing drugs and medical devices to prevent, diagnose, and treat these conditions is challenging. The Institute of Medicine (IOM) recommends implementing an integrated national strategy to promote rare diseases research and product development.

Download or read book FDA Regulation of Medical Devices written by Judith A. Johnson and published by CreateSpace. This book was released on 2012-07-06 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: On June 20, 2012, the House of Representatives passed, by voice vote and under suspension of the rules, S. 3187 (EAH), the Food and Drug Administration Safety and Innovation Act, as amended. This bill would reauthorize the FDA prescription drug and medical device user fee programs (which would otherwise expire on September 30, 2012), create new user fee programs for generic and biosimilar drug approvals, and make other revisions to other FDA drug and device approval processes. It reflects bicameral compromise on earlier versions of the bill (S. 3187 [ES], which passed the Senate on May 24, 2012, and H.R. 5651 [EH], which passed the House on May 30, 2012). The following CRS reports provide overview information on FDA's processes for approval and regulation of drugs: CRS Report R41983, How FDA Approves Drugs and Regulates Their Safety and Effectiveness, by Susan Thaul; CRS Report RL33986, FDA's Authority to Ensure That Drugs Prescribed to Children Are Safe and Effective, by Susan Thaul; CRS Report R42130, FDA Regulation of Medical Devices, by Judith A. Johnson; CRS Report R42508, The FDA Medical Device User Fee Program, by Judith A. Johnson. (Note: The rest of this report has not been updated since December 28, 2011.) Prior to and since the passage of the Medical Device Amendments of 1976, Congress has debated how best to ensure that consumers have access, as quickly as possible, to new and improved medical devices and, at the same time, prevent devices that are not safe and effective from entering or remaining on the market. Medical devices regulation is complex, in part, because of the wide variety of items that are categorized as medical devices; examples range from a simple tongue depressor to a life-sustaining heart valve. The regulation of medical devices can affect their cost, quality, and availability in the health care system. In order to be legally marketed in the United States, many medical devices must be reviewed by the Food and Drug Administration (FDA), the agency responsible for protecting the public health by overseeing medical products, including devices. FDA's Center for Devices and Radiological Health (CDRH) is primarily responsible for medical device review. CDRH activities are funded through a combination of public money (i.e., direct FDA appropriations from Congress) and private money (i.e., user fees collected from device manufacturers) which together comprise FDA's total. User fees account for 33% of FDA's total FY2011 program level and 15% of CDRH's program level, which is $378 million in FY2011 including $56 million in user fees. FDA's authority to collect user fees, originally authorized in 2002 (P.L. 107-250), has been reauthorized in five-year increments. It will expire on October 1, 2012, under the terms of the Medical Device User Fee Act of 2007 (MDUFA), Title II of the FDA Amendments Act of 2007 (FDAAA, P.L. 110-85). FDA requires all medical product manufacturers to register their facilities, list their devices with FDA, and follow general controls requirements. FDA classifies devices according to the risk they pose to consumers. Premarket review is required for moderate- and high-risk devices. There are two paths that manufacturers can use to bring such devices to market. One path consists of conducting clinical studies, submitting a premarket approval (PMA) application and requires evidence providing reasonable assurance that the device is safe and effective. The other path involves submitting a 510(k) notification demonstrating that the device is substantially equivalent to a device already on the market (a predicate device) that does not require a PMA. The 510(k) process results in FDA clearance and tends to be much less expensive and less time- consuming than seeking FDA approval via PMA.

Download or read book Medical Device Regulations written by Michael Cheng and published by World Health Organization. This book was released on 2003-09-16 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: The term 'medical devices' covers a wide range of equipment essential for patient care at every level of the health service, whether at the bedside, at a health clinic or in a large specialised hospital. Yet many countries lack access to high-quality devices, particularly in developing countries where health technology assessments are rare and there is a lack of regulatory controls to prevent the use of substandard devices. This publication provides a guidance framework for countries wishing to create or modify their own regulatory systems for medical devices, based on best practice experience in other countries. Issues highlighted include: the need for harmonised regulations; and the adoption, where appropriate, of device approvals of advanced regulatory systems to avoid an unnecessary drain on scarce resources. These approaches allow emphasis to be placed on locally-assessed needs, including vendor and device registration, training and surveillance and information exchange systems.

Download or read book Medical Device Design and Regulation written by Carl T. DeMarco and published by Quality Press. This book was released on 2011-01-24 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: The intent of this book (MDDR, for short) is to present an introduction to, and overview of, the world of medical device regulation by the United States Food and Drug Administration (FDA), and the relationship of this regulatory scheme to the design and development of medical devices. In providing this information, the book covers the broad range of requirements, which are presented within eight major topics: background and regulatory environment, device design control, nonclinical testing, clinical testing, marketing applications, post-market requirements, quality systems/GMPs, and compliance/enforcement. This book provides students and professionals in the medical device industry with a road map to the regulation of medical devices. It provides a broad understanding of the breadth and depth of medical device regulation by collecting in one textbook coverage of the regulatory scheme for medical devices in terms that are suitable for engineers, scientists, and healthcare providers. The vast amount of information available on the subject is distilled into a concise and coherent presentation. There also are problems and projects at the end of each chapter. In addition to the usual questions requiring specific answers, the projects include the drafting of a device control plan, the development of a nonclinical test procedure, the resolution of a recall, the response to a Warning Letter, and the creation of a CAPA for a device deficiency. A solutions manual for these exercises is available to teachers who adopt the textbook for classroom use or for employee training. Medical Device Design and Regulation (MDDR) also makes available over 100 complimentary live hyperlinks to web pages with additional relevant information, and offers users the opportunity to join and participate in the “MDDR Users Group” on LinkedIn.

Download or read book Medical Device Regulation written by Elijah Wreh and published by Elsevier. This book was released on 2023-02-22 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: Medical Device Regulation provides the current FDA-CDRH thinking on the regulation of medical devices. This book offers information on how devices meet criteria for being a medical device, which agencies regulate medical devices, how policies regarding regulation affect the market, rules regarding marketing, and laws and standards that govern testing. This practical, well-structured reference tool helps medical device manufacturers both in and out of the United States with premarket application and meeting complex FDA regulatory requirements. The book delivers a comprehensive overview of the field from an author with expertise in regulatory affairs and commercialization of medical devices. - Offers a unique focus on the regulatory affairs industry, specifically targeted at regulatory affairs professionals and those seeking certification - Puts regulations in the context of contemporary design - Includes case studies and applications of regulations