Download or read book Fault Tolerant Traction Electric Drives written by Igor Bolvashenkov and published by Springer. This book was released on 2019-07-01 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise book focuses on the reliability of traction electrical drives. The first chapter presents the Lz-transform approach for the comparative analysis of the fault tolerance of multi-motor electrical drives with multi-phase traction motors. The second chapter then provides an estimate of the value of the operational availability and performance of a diesel–electric multi-drive propulsion system, while the third chapter introduces the concept of a more electric aircraft. Lastly, the fourth chapter analyzes the requirements for multi-phase permanent-magnet motors applicable in various aircraft systems.

Download or read book Safety Critical Electrical Drives written by Igor Bolvashenkov and published by Springer. This book was released on 2018-05-07 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on one of the most important aspects of electrical propulsion systems – the creation of highly reliable safety-critical traction electrical drives. It discusses the methods and models for analysis and optimization of reliability and fault tolerance indices, based on which, it proposes and assesses methods for improving the availability, fault tolerance and performance of traction electric drives.

Download or read book Multiple 3 phase Fault Tolerant Permanent Magnet Machine Drives Design and Control written by Bo Wang and published by Wiley-IEEE Press. This book was released on 2024-12-24 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Groundbreaking analysis of a fully functional fault-tolerant machine drive Electrical machine drives have become an increasingly important component of transportation electrification, including electric vehicles, railway and subway traction, aerospace actuation, and more. This expansion of electrical machine drives into safety-critical areas has driven an increasingly urgent demand for high reliability and strong fault tolerance. Machine drives incorporating a permanent magnet (PM)-assisted synchronous reluctance machine drive with a segregated winding have shown to exhibit notably reduced PM flux and correspondingly enhanced fault tolerance. Multiple 3-Phase Fault Tolerant Permanent Magnet Machine Drives: Design and Control offers one of the first fully integrated accounts of a functional fault-tolerant machine drive. It proposes a segregated winding which can be incorporated into multiple machine topologies without affecting performance and brings together cutting-edge technologies to manage these crucial drives in both healthy and fault conditions. The result is a must-own for engineers and researchers alike. Readers will also find: Advanced modeling techniques for different operation conditions Detailed discussion on topics including fault detection techniques, postfault tolerant control strategies, and many more An authorial team with immense experience in the study of fault-tolerant machine drives Multiple 3-Phase Fault Tolerant Permanent Magnet Machine Drives: Design and Control is ideal for researchers and graduate students in engineering and related industries.

Download or read book New Applications of Electric Drives written by Miroslav Chomat and published by BoD – Books on Demand. This book was released on 2015-12-09 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last few decades, electric drives have found their place in a considerable number of diverse applications. They are successfully replacing some other traditional types of drives owing to their better performance and excellent controllability. The introduction of electric drives is in most cases also beneficial from the ecological point of view as they are not directly dependent on fossil fuels and an increasing part of electric energy they consume is generated in renewable energy sources. This book focuses on applications of electric drives that emerged only recently and/or novel aspects that appear in them. Particular attention is given to using electric drives in vehicles, aircraft, non-road mobile machinery, and HVAC systems.

Download or read book Enhancing the Fault Tolerance of the Electric Drive in a Future Steering System by Utilizing Self Sensing written by Kilian Rehorik and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fault Diagnosis and Fault Tolerant Control of Multiphase Voltage Source Converters for Application in Traction Drives written by Mehdi Salehifar and published by . This book was released on 2014 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is an increasing demand for vehicles with less environmental impact and higher fuel efficiency. To meet these requirements, the transportation electrification has been introduced in both academia and industry during last years. Electric vehicle (EV) and hybrid Electric vehicle (HEV) are two practical examples in transportation systems. The typical power train in the EVs consists of three main parts including energy source, power electronics and an electrical motor. Regarding the machine, permanent magnet (PM) motors are the dominant choice for light duty hybrid vehicles in industry due to their higher efficiency and power density. In order to operate the power train, the electrical machine can be supplied and controlled by a voltage source inverter (VSI). The converter is subjected to various fault types. According to the statistics, 38% of faults in a motor drive are due to the power converter. On the other side, the electrical power train should meet a high level of reliability. Multiphase PM machines can meet the reliability requirements due to their fault-tolerant characteristics. The machine can still be operational with faults in multiple phases. Consequently, to realize a multiphase fault-tolerant motor drive, three main concepts should be developed including fault detection (FD), fault isolation and fault-tolerant control. This PhD thesis is therefore focused on FD and fault-tolerant control of a multiphase VSI. To achieve this research goal, the presented FD and control methods of the power converter are thoroughly investigated through literature review. Following that, the operational condition of the multiphase converter supplying the electrical machine is studied. Regarding FD methods in multiphase, three new algorithms are presented in this thesis. These proposed FD methods are also embedded in new fault-tolerant control algorithms. At the first step, a novel model based FD method is proposed to detect multiple open switch faults. This FD method is included in the developed adaptive proportional resonant control algorithm of the power converter. At the second step, two signal based FD methods are proposed. Fault-tolerant control of the power converter with the conventional PI controller is discussed. Furthermore, the theory of SMC is developed. At the last step, finite control set (FCS) model predictive control (MPC) of the five-phase brushless direct current (BLDC) motor is discussed for the first time in this thesis. A simple FD method is derived from the control signals. Inputs to all developed methods are the five-phase currents of the motor. The theory of each method is explained and compared with available methods. To validate the developed theory at each part, FD algorithm is embedded in the fault-tolerant control algorithm. Experimental results are conducted on a five-phase BLDC motor drive. The electrical motor used in the experimental results has an in-wheel outer rotor structure. This motor is suitable for electric vehicles. At the end of each part, the remarkable points and conclusions are presented.

Download or read book The Handbook of Reliability Maintenance and System Safety through Mathematical Modeling written by Amit Kumar and published by Academic Press. This book was released on 2021-01-09 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Reliability, Maintenance, and System Safety through Mathematical Modeling discusses the many factors affect reliability and performance, including engineering design, materials, manufacturing, operations, maintenance, and many more. Reliability is one of the fundamental criteria in engineering systems design, with maintenance serving as a way to support reliability throughout a system’s life. Addressing these issues requires information, modeling, analysis and testing. Different techniques are proposed and implemented to help readers analyze various behavior measures (in terms of the functioning and performance) of systems. Enables mathematicians to convert any process or system into a model that can be analyzed through a specific technique Examines reliability and mathematical modeling in a variety of disciplines, unlike competitors which typically examine only one Includes a table of contents with simple to complex examples, starting with basic models and then refining modeling approaches step-by-step

Download or read book Fault Detection written by Wei Zhang and published by BoD – Books on Demand. This book was released on 2010-03-01 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, a number of innovative fault diagnosis algorithms in recently years are introduced. These methods can detect failures of various types of system effectively, and with a relatively high significance.

Download or read book DC DC Converters for Future Renewable Energy Systems written by Neeraj Priyadarshi and published by Springer Nature. This book was released on 2021-09-27 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the analysis and control of numerous DC-DC converters widely used in several applications such as standalone, grid integration, and motor drives-based renewable energy systems. The book provides extensive simulation and practical analysis of recent and advanced DC-DC power converter topologies. This self-contained book contributes to DC-DC converters design, control techniques, and industrial as well as domestic applications of renewable energy systems. This volume will be useful for undergraduate/postgraduate students, energy planners, designers, system analysis, and system governors.

Download or read book Technological Innovation for Sustainability written by Luis M. Camarinha-Matos and published by Springer. This book was released on 2011-02-14 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the Second IFIP WG 5.5/SOCOLNET Doctoral Conference on Computing, Electrical and Industrial Systems, DoCEIS 2011, held in Costa de Caparica, Portugal, in February 2011. The 67 revised full papers were carefully selected from numerous submissions. They cover a wide spectrum of topics ranging from collaborative enterprise networks to microelectronics. The papers are organized in topical sections on collaborative networks, service-oriented systems, computational intelligence, robotic systems, Petri nets, sensorial and perceptional systems, sensorial systems and decision, signal processing, fault-tolerant systems, control systems, energy systems, electrical machines, and electronics.

Download or read book Mathematical Modelling of System Resilience written by Kanchan Das and published by CRC Press. This book was released on 2022-09-01 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Almost all the systems in our world, including technical, social, economic, and environmental systems, are becoming interconnected and increasingly complex, and as such they are vulnerable to various risks. Due to this trend, resilience creation is becoming more important to system managers and decision makers, this to ensure sustained performance. In order to be able to ensure an acceptable sustained performance under such interconnectedness and complexity, resilience creation with a system approach is a requirement. Mathematical modeling based approaches are the most common approach for system resilience creation.Mathematical Modelling of System Resilience covers resilience creation for various system aspects including a functional system of the supply chain, overall supply chain systems; various methodologies for modeling system resilience; satellite-based approach for addressing climate related risks, repair-based approach for sustainable performance of an engineering system, and modeling measures of the reliability for a vertical take-off and landing system. Each of the chapters contributes state of the art research for the relevant resilience related topic covered in the chapter. Technical topics covered in the book include:1. Supply chain risk, vulnerability and disruptions 2. System resilience for containing failures and disruptions3. Resiliency considering frequency and intensities of disasters4. Resilience performance index5. Resiliency of electric Traction system6. Degree of resilience7. Satellite observation and hydrological risk8. Latitude of Resilience9. On-line repair for resilience10. Reliability design for Vertical Takeoff and landing Prototype

Download or read book Modern Electric Hybrid Electric and Fuel Cell Vehicles written by Mehrdad Ehsani and published by CRC Press. This book was released on 2018-02-02 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book is an introduction to automotive technology, with specic reference to battery electric, hybrid electric, and fuel cell electric vehicles. It could serve electrical engineers who need to know more about automobiles or automotive engineers who need to know about electrical propulsion systems. For example, this reviewer, who is a specialist in electric machinery, could use this book to better understand the automobiles for which the reviewer is designing electric drive motors. An automotive engineer, on the other hand, might use it to better understand the nature of motors and electric storage systems for application in automobiles, trucks or motorcycles. The early chapters of the book are accessible to technically literate people who need to know something about cars. While the rst chapter is historical in nature, the second chapter is a good introduction to automobiles, including dynamics of propulsion and braking. The third chapter discusses, in some detail, spark ignition and compression ignition (Diesel) engines. The fourth chapter discusses the nature of transmission systems.” —James Kirtley, Massachusetts Institute of Technology, USA “The third edition covers extensive topics in modern electric, hybrid electric, and fuel cell vehicles, in which the profound knowledge, mathematical modeling, simulations, and control are clearly presented. Featured with design of various vehicle drivetrains, as well as a multi-objective optimization software, it is an estimable work to meet the needs of automotive industry.” —Haiyan Henry Zhang, Purdue University, USA “The extensive combined experience of the authors have produced an extensive volume covering a broad range but detailed topics on the principles, design and architectures of Modern Electric, Hybrid Electric, and Fuel Cell Vehicles in a well-structured, clear and concise manner. The volume offers a complete overview of technologies, their selection, integration & control, as well as an interesting Technical Overview of the Toyota Prius. The technical chapters are complemented with example problems and user guides to assist the reader in practical calculations through the use of common scientic computing packages. It will be of interest mainly to research postgraduates working in this eld as well as established academic researchers, industrial R&D engineers and allied professionals.” —Christopher Donaghy-Sparg, Durham University, United Kingdom The book deals with the fundamentals, theoretical bases, and design methodologies of conventional internal combustion engine (ICE) vehicles, electric vehicles (EVs), hybrid electric vehicles (HEVs), and fuel cell vehicles (FCVs). The design methodology is described in mathematical terms, step-by-step, and the topics are approached from the overall drive train system, not just individual components. Furthermore, in explaining the design methodology of each drive train, design examples are presented with simulation results. All the chapters have been updated, and two new chapters on Mild Hybrids and Optimal Sizing and Dimensioning and Control are also included • Chapters updated throughout the text. • New homework problems, solutions, and examples. • Includes two new chapters. • Features accompanying MATLABTM software.

Download or read book Vehicle Electrification written by Igor Bolvashenkov and published by Springer Nature. This book was released on 2021-09-15 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive assessment and presentation of various feasible application of electric propulsion system, considering their weight, volume, reliability, and fault tolerance. The results of feasibility analysis can be used today or in the near future for development of electric propulsion system for the ships, planes, helicopters, and spacecrafts. To solve the above task, new theoretical approaches are applied, including combined random process methods, the Lz-transform technique for multistate systems, and statistical data processing.

Download or read book Introduction to Electric Drives written by Ishwar Singh and published by Pencil. This book was released on 2024-05-17 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, "Introduction to Electric Drives," is written to offer readers a background walkthrough from which they will have an ample understanding of electric drive systems and their uses in different industries. This book is an inseparable source for students, apprentices, researchers, developers, and specialists hunting for new knowledge on electric drives. Less commonly, electronic drives are used in electric motor applications in the industry, in infrastructure and transport networks, as well as in renewable energy and electronics. Knowledge of electric drive principles, construction, and operation is required of those whose tasks are to design, implement, or support electric drive electrical systems.

Download or read book Intelligent and Efficient Transport Systems written by Truong Quang Dinh and published by BoD – Books on Demand. This book was released on 2020-04-01 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to present a number of digital and technology solutions to real-world problems across transportation sectors and infrastructures. Nine chapters have been well prepared and organized with the core topics as follows: -A guideline to evaluate the energy efficiency of a vehicle -A guideline to design and evaluate an electric propulsion system -Potential opportunities for intelligent transportation systems and smart cities -The importance of system control and energy-power management in transportation systems and infrastructures -Bespoke modeling tools and real-time simulation platforms for transportation system development This book will be useful to a wide range of audiences: university staff and students, engineers, and business people working in relevant fields.

Download or read book State Estimation and Coordinated Control for Distributed Electric Vehicles written by Wenbo Chu and published by Springer. This book was released on 2015-10-26 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book tackles some of the most challenging problems in state estimation and traction coordinated control systems to improve the dynamic control performance of Distributed Electric Vehicles. The developed methods make it possible to gain more accurate information regarding the vehicle states, ensure more desirable vehicle motions and better robustness in unforeseeable driving environments. Given the impressive features of Distributed Electric Vehicles, including their simple and compact structure, short transmission chains, fast and accurate control response, modular drivetrain design etc., it is widely recognized that they represent an important future development direction and attract many of the brightest engineers and scientists. This book makes a significant contribution to the design of safer and more efficient vehicles.

Download or read book Reliability Modeling in Industry 4 0 written by Mangey Ram and published by Elsevier. This book was released on 2023-03-13 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability Modeling with Industry 4.0 explores the emerging theoretical and practical developments in reliability engineering in highly digitized industries, including power, computer systems, railway systems, and robotics. Drawing on leading research from around the globe, as well as the latest in industry practice, this book provides cutting edge advice on how to integrate a fully digitized industry 4.0 system for enhanced reliability and reduced maintenance cost. Technologies such as big data, artificial intelligence, and the industrial internet of things are addressed in the context of reliability engineering, providing practical advice on applications. Provides innovative reliability modeling tools related to the application of Industry 4.0 technologies Includes case studies from industries such as rail, energy, and computer systems Describes techniques for the successful digital transformation of industries for sophisticated reliability systems