Download or read book Fault Diagnosis and Failure Prognostics of Lithium ion Battery Based on Least Squares Support Vector Machine and Memory Particle Filter Framework written by Mohammed Ali Lskaafi and published by . This book was released on 2015 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: A novel data driven approach is developed for fault diagnosis and remaining useful life (RUL) prognostics for lithium-ion batteries using Least Square Support Vector Machine (LS-SVM) and Memory-Particle Filter (M-PF). Unlike traditional data-driven models for capacity fault diagnosis and failure prognosis, which require multidimensional physical characteristics, the proposed algorithm uses only two variables: Energy Efficiency (EE), and Work Temperature. The aim of this novel framework is to improve the accuracy of incipient and abrupt faults diagnosis and failure prognosis. First, the LSSVM is used to generate residual signal based on capacity fade trends of the Li-ion batteries. Second, adaptive threshold model is developed based on several factors including input, output model error, disturbance, and drift parameter. The adaptive threshold is used to tackle the shortcoming of a fixed threshold. Third, the M-PF is proposed as the new method for failure prognostic to determine Remaining Useful Life (RUL). The M-PF is based on the assumption of the availability of real-time observation and historical data, where the historical failure data can be used instead of the physical failure model within the particle filter. The feasibility of the framework is validated using Li-ion battery prognostic data obtained from the National Aeronautic and Space Administration (NASA) Ames Prognostic Center of Excellence (PCoE). The experimental results show the following: (1) fewer data dimensions for the input data are required compared to traditional empirical models; (2) the proposed diagnostic approach provides an effective way of diagnosing Li-ion battery fault; (3) the proposed prognostic approach can predict the RUL of Li-ion batteries with small error, and has high prediction accuracy; and, (4) the proposed prognostic approach shows that historical failure data can be used instead of a physical failure model in the particle filter.

Download or read book Fault Diagnosis and Failure Prognostics of Lithium ion Battery written by Mohammed Lskaafi and published by . This book was released on 2016-03-08 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fault Diagnosis of Lithium Ion Battery Using Multiple Model Adaptive Estimation written by Amardeep Singh Sidhu and published by . This book was released on 2013 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lithium ion (Li-ion) batteries have become integral parts of our lives; they are widely used in applications like handheld consumer products, automotive systems, and power tools among others. To extract maximum output from a Li-ion battery under optimal conditions it is imperative to have access to the state of the battery under every operating condition. Faults occurring in the battery when left unchecked can lead to irreversible, and under extreme conditions, catastrophic damage. In this thesis, an adaptive fault diagnosis technique is developed for Li-ion batteries. For the purpose of fault diagnosis the battery is modeled by using lumped electrical elements under the equivalent circuit paradigm. The model takes into account much of the electro-chemical phenomenon while keeping the computational effort at the minimum. The diagnosis process consists of multiple models representing the various conditions of the battery. A bank of observers is used to estimate the output of each model; the estimated output is compared with the measurement for generating residual signals. These residuals are then used in the multiple model adaptive estimation (MMAE) technique for generating probabilities and for detecting the signature faults. The effectiveness of the fault detection and identification process is also dependent on the model uncertainties caused by the battery modeling process. The diagnosis performance is compared for both the linear and nonlinear battery models. The non-linear battery model better captures the actual system dynamics and results in considerable improvement and hence robust battery fault diagnosis in real time. Furthermore, it is shown that the non-linear battery model enables precise battery condition monitoring in different degrees of over-discharge.

Download or read book Fault Diagnosis and Prognosis Techniques for Complex Engineering Systems written by Hamid Reza Karimi and published by Academic Press. This book was released on 2021-06-05 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Diagnosis and Prognosis Techniques for Complex Engineering Systems gives a systematic description of the many facets of envisaging, designing, implementing, and experimentally exploring emerging trends in fault diagnosis and failure prognosis in mechanical, electrical, hydraulic and biomedical systems. The book is devoted to the development of mathematical methodologies for fault diagnosis and isolation, fault tolerant control, and failure prognosis problems of engineering systems. Sections present new techniques in reliability modeling, reliability analysis, reliability design, fault and failure detection, signal processing, and fault tolerant control of engineering systems. Sections focus on the development of mathematical methodologies for diagnosis and prognosis of faults or failures, providing a unified platform for understanding and applicability of advanced diagnosis and prognosis methodologies for improving reliability purposes in both theory and practice, such as vehicles, manufacturing systems, circuits, flights, biomedical systems. This book will be a valuable resource for different groups of readers – mechanical engineers working on vehicle systems, electrical engineers working on rotary machinery systems, control engineers working on fault detection systems, mathematicians and physician working on complex dynamics, and many more. - Presents recent advances of theory, technological aspects, and applications of advanced diagnosis and prognosis methodologies in engineering applications - Provides a series of the latest results, including fault detection, isolation, fault tolerant control, failure prognosis of components, and more - Gives numerical and simulation results in each chapter to reflect engineering practices

Download or read book Fault Detection Diagnosis and Prognosis written by Fausto Pedro García Márquez and published by BoD – Books on Demand. This book was released on 2020-02-05 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the main concepts, state of the art, advances, and case studies of fault detection, diagnosis, and prognosis. This topic is a critical variable in industry to reach and maintain competitiveness. Therefore, proper management of the corrective, predictive, and preventive politics in any industry is required. This book complements other subdisciplines such as economics, finance, marketing, decision and risk analysis, engineering, etc. The book presents real case studies in multiple disciplines. It considers the main topics using prognostic and subdiscipline techniques. It is essential to link these topics with the areas of finance, scheduling, resources, downtime, etc. to increase productivity, profitability, maintainability, reliability, safety, and availability, and reduce costs and downtime. Advances in mathematics, modeling, computational techniques, dynamic analysis, etc. are employed analytically. Computational techniques, dynamic analysis, probabilistic methods, and mathematical optimization techniques are expertly blended to support the analysis of prognostic problems with defined constraints and requirements. The book is intended for graduate students and professionals in industrial engineering, business administration, industrial organization, operations management, applied microeconomics, and the decisions sciences, either studying maintenance or needing to solve large, specific, and complex maintenance management problems as part of their jobs. The work will also be of interest to researches from academia.

Download or read book Prognostics and Health Management of Electronics written by Michael G. Pecht and published by John Wiley & Sons. This book was released on 2018-08-15 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: An indispensable guide for engineers and data scientists in design, testing, operation, manufacturing, and maintenance A road map to the current challenges and available opportunities for the research and development of Prognostics and Health Management (PHM), this important work covers all areas of electronics and explains how to: assess methods for damage estimation of components and systems due to field loading conditions assess the cost and benefits of prognostic implementations develop novel methods for in situ monitoring of products and systems in actual life-cycle conditions enable condition-based (predictive) maintenance increase system availability through an extension of maintenance cycles and/or timely repair actions; obtain knowledge of load history for future design, qualification, and root cause analysis reduce the occurrence of no fault found (NFF) subtract life-cycle costs of equipment from reduction in inspection costs, downtime, and inventory Prognostics and Health Management of Electronics also explains how to understand statistical techniques and machine learning methods used for diagnostics and prognostics. Using this valuable resource, electrical engineers, data scientists, and design engineers will be able to fully grasp the synergy between IoT, machine learning, and risk assessment.

Download or read book Fault Diagnosis for Lithium ion Battery System of Hybrid Electric Aircraft written by Ye Cheng and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aircraft industry, commercial utilities, and federal agencies, such as NASA, are investing in aircraft solutions for a more sustainable, cleaner, and quieter transportation solutions for people and cargo. One option that is actively considered is that of a hybrid-electric aircraft, and in this application the energy storage system (ESS) may consist of thousands or even tens of thousands of cells. These cells are then connected in series and in parallel to form modules, which then are assembled into battery packs to meet energy and power requirements, resulting in systems that are large-dimensional and that have complex interconnections. Because of differences in cell electrical and thermal characteristics and in cell aging, the energy/power density and the durability and safety of the battery packs will be reduced to a certain extent compared with individual cells. It is therefore very important to design a battery management system (BMS) that can enable cell level monitoring and that is capable of diagnosing faults that are considered to be critical. This dissertation presents some design aspects for a battery pack intended for aviation application and its BMS considering safety, health and safety monitoring, and diagnostics. Generalized equivalent circuit models (GECMs) are used to predict the overall battery pack performance and to investigate the different behavior of different battery pack architectures in the case of cell-to-cell parameter variations or in the case of faults. A comparative analysis between different battery pack architectures is conducted as well, to determine a better architecture that is more reliable in the case of a cell fault. A set of critical faults is selected for fault modeling to augment the battery cell model and pack model. The battery pack model with fault modeling is then used in a Software-In-the-Loop (SIL) framework under the NASA ULI hybrid turbo-electric aircraft case scenario with the purpose of understanding the performance of the battery system under different fault cases. A systematic model-based diagnostic methodology called structural analysis is used to determine the sensor placement strategies that are needed by the BMS to improve its ability to monitor and diagnose the battery system. The degree of analytical redundancy (AR) in the battery system that can be used for diagnostic strategies is determined using the tools of structural analysis. Structural models of different battery pack architectures are used to study how different measurements (current, voltage, and temperature) may improve the ability to monitor and diagnose a battery system. Possible sensor placement strategies that would enable the diagnosis of a set of critical faults for different battery pack topologies are analyzed as well. The optimal sensor sets that can meet both typical BMS requirements and also provide the necessary FDI requirements for the two fundamental battery architectures are determined using this novel methodology. A distributed fault diagnosis scheme is then proposed for a lithium-ion battery pack that can effectively detect and isolate individual cell faults, connection faults and sensor faults. The fault diagnostic algorithms are evaluated within the SIL simulation framework to show the functionalities of the proposed FDI scheme. This dissertation represents the first systematic approach to the design of battery systems for aviation applications that explicitly considers fault diagnosis and fault tolerance.

Download or read book Bond Graphs for Modelling Control and Fault Diagnosis of Engineering Systems written by Wolfgang Borutzky and published by Springer. This book was released on 2016-12-31 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents theory and latest application work in Bond Graph methodology with a focus on: • Hybrid dynamical system models, • Model-based fault diagnosis, model-based fault tolerant control, fault prognosis • and also addresses • Open thermodynamic systems with compressible fluid flow, • Distributed parameter models of mechanical subsystems. In addition, the book covers various applications of current interest ranging from motorised wheelchairs, in-vivo surgery robots, walking machines to wind-turbines.The up-to-date presentation has been made possible by experts who are active members of the worldwide bond graph modelling community. This book is the completely revised 2nd edition of the 2011 Springer compilation text titled Bond Graph Modelling of Engineering Systems – Theory, Applications and Software Support. It extends the presentation of theory and applications of graph methodology by new developments and latest research results. Like the first edition, this book addresses readers in academia as well as practitioners in industry and invites experts in related fields to consider the potential and the state-of-the-art of bond graph modelling.

Download or read book International Journal of Prognostics and Health Management Volume 3 color written by PHM Society and published by Lulu.com. This book was released on 2013-09-24 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: PHM Society established International Journal of Prognostics and Health Management (IJPHM) in 2009 to facilitate archival publication of peer-reviewed results from research and development in the area of PHM. As a journal solely dedicated to the emerging field of PHM IJPHM is the first of its kind and has been a focal point for dissemination of peer-reviewed PHM knowledge. While for the first few years the journal maintained only an online presence, the printed volumes will now be available and can be obtained upon request.

Download or read book Bayesian Networks In Fault Diagnosis Practice And Application written by Baoping Cai and published by World Scientific. This book was released on 2018-08-24 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault diagnosis is useful for technicians to detect, isolate, identify faults, and troubleshoot. Bayesian network (BN) is a probabilistic graphical model that effectively deals with various uncertainty problems. This model is increasingly utilized in fault diagnosis.This unique compendium presents bibliographical review on the use of BNs in fault diagnosis in the last decades with focus on engineering systems. Subsequently, eleven important issues in BN-based fault diagnosis methodology, such as BN structure modeling, BN parameter modeling, BN inference, fault identification, validation, and verification are discussed in various cases.Researchers, professionals, academics and graduate students will better understand the theory and application, and benefit those who are keen to develop real BN-based fault diagnosis system.

Download or read book International Journal of Prognostics and Health Management Volume 1 color written by PHM Society and published by Lulu.com. This book was released on 2013-09-24 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt: PHM Society established International Journal of Prognostics and Health Management (IJPHM) in 2009 to facilitate archival publication of peer-reviewed results from research and development in the area of PHM. As a journal solely dedicated to the emerging field of PHM IJPHM is the first of its kind and has been a focal point for dissemination of peer-reviewed PHM knowledge. While for the first few years the journal maintained only an online presence, the printed volumes will now be available and can be obtained upon request. The first IJPHM volume came out in 2010 with three research papers that discussed the key issue of PHM performance that is still relevant to the maturing field of PHM.

Download or read book Filter Based Fault Diagnosis and Remaining Useful Life Prediction written by Yong Zhang and published by CRC Press. This book was released on 2023-02-10 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book unifies existing and emerging concepts concerning state estimation, fault detection, fault isolation and fault estimation on industrial systems with an emphasis on a variety of network-induced phenomena, fault diagnosis and remaining useful life for industrial equipment. It covers state estimation/monitor, fault diagnosis and remaining useful life prediction by drawing on the conventional theories of systems science, signal processing and machine learning. Features: Unifies existing and emerging concepts concerning robust filtering and fault diagnosis with an emphasis on a variety of network-induced complexities. Explains theories, techniques, and applications of state estimation as well as fault diagnosis from an engineering-oriented perspective. Provides a series of latest results in robust/stochastic filtering, multidate sample, and time-varying system. Captures diagnosis (fault detection, fault isolation and fault estimation) for time-varying multi-rate systems. Includes simulation examples in each chapter to reflect the engineering practice. This book aims at graduate students, professionals and researchers in control science and application, system analysis, artificial intelligence, and fault diagnosis.

Download or read book Algorithms for Fault Detection and Diagnosis written by Francesco Ferracuti and published by MDPI. This book was released on 2021-03-19 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the increasing demand for security and reliability in manufacturing and mechatronic systems, early detection and diagnosis of faults are key points to reduce economic losses caused by unscheduled maintenance and downtimes, to increase safety, to prevent the endangerment of human beings involved in the process operations and to improve reliability and availability of autonomous systems. The development of algorithms for health monitoring and fault and anomaly detection, capable of the early detection, isolation, or even prediction of technical component malfunctioning, is becoming more and more crucial in this context. This Special Issue is devoted to new research efforts and results concerning recent advances and challenges in the application of “Algorithms for Fault Detection and Diagnosis”, articulated over a wide range of sectors. The aim is to provide a collection of some of the current state-of-the-art algorithms within this context, together with new advanced theoretical solutions.

Download or read book Predictive Maintenance in Dynamic Systems written by Edwin Lughofer and published by Springer. This book was released on 2019-02-28 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a complete picture of several decision support tools for predictive maintenance. These include embedding early anomaly/fault detection, diagnosis and reasoning, remaining useful life prediction (fault prognostics), quality prediction and self-reaction, as well as optimization, control and self-healing techniques. It shows recent applications of these techniques within various types of industrial (production/utilities/equipment/plants/smart devices, etc.) systems addressing several challenges in Industry 4.0 and different tasks dealing with Big Data Streams, Internet of Things, specific infrastructures and tools, high system dynamics and non-stationary environments . Applications discussed include production and manufacturing systems, renewable energy production and management, maritime systems, power plants and turbines, conditioning systems, compressor valves, induction motors, flight simulators, railway infrastructures, mobile robots, cyber security and Internet of Things. The contributors go beyond state of the art by placing a specific focus on dynamic systems, where it is of utmost importance to update system and maintenance models on the fly to maintain their predictive power.

Download or read book Smart Lithium ion Battery Power System with Fault Diagnosis and Fault Tolerant Design written by Zuchang Gao and published by . This book was released on 2018 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fault Diagnosis Prognosis and Reliability for Electrical Machines and Drives written by Elias G. Strangas and published by John Wiley & Sons. This book was released on 2021-11-19 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Diagnosis, Prognosis, and Reliability for Electrical Machines and Drives An insightful treatment of present and emerging technologies in fault diagnosis and failure prognosis In Fault Diagnosis, Prognosis, and Reliability for Electrical Machines and Drives, a team of distinguished researchers delivers a comprehensive exploration of current and emerging approaches to fault diagnosis and failure prognosis of electrical machines and drives. The authors begin with foundational background, describing the physics of failure, the motor and drive designs and components that affect failure and signals, signal processing, and analysis. The book then moves on to describe the features of these signals and the methods commonly used to extract these features to diagnose the health of a motor or drive, as well as the methods used to identify the state of health and differentiate between possible faults or their severity. Fault Diagnosis, Prognosis, and Reliability for Electrical Machines and Drives discusses the tools used to recognize trends towards failure and the estimation of remaining useful life. It addresses the relationships between fault diagnosis, failure prognosis, and fault mitigation. The book also provides: A thorough introduction to the modes of failure, how early failure precursors manifest themselves in signals, and how features extracted from these signals are processed A comprehensive exploration of the fault diagnosis, the results of characterization, and how they used to predict the time of failure and the confidence interval associated with it A focus on medium-sized drives, including induction, permanent magnet AC, reluctance, and new machine and drive types Perfect for researchers and students who wish to study or practice in the rea of electrical machines and drives, Fault Diagnosis, Prognosis, and Reliability for Electrical Machines and Drives is also an indispensable resource for researchers with a background in signal processing or statistics.

Download or read book Fault Diagnosis for Robust Inverter Power Drives written by Antonio Ginart and published by Institution of Engineering and Technology. This book was released on 2018-11-15 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power drives are used for induction motor control, uninterruptible power supplies, and in electrical vehicles. The increasing penetration of power drives makes their reliability, robustness, and early diagnosis a central point of attention especially in planning, designing, and financing. This book explores fault diagnosis of inverter drives to enable early diagnosis and robust design for efficient long life operation.