Download or read book Automated Diagnostics and Analytics for Buildings written by Barney L. Capehart and published by CRC Press. This book was released on 2021-01-07 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the widespread availability of high-speed, high-capacity microprocessors and microcomputers with high-speed communication ability, and sophisticated energy analytics software, the technology to support deployment of automated diagnostics is now available, and the opportunity to apply automated fault detection and diagnostics to every system and piece of equipment in a facility, as well as for whole buildings, is imminent. The purpose of this book is to share information with a broad audience on the state of automated fault detection and diagnostics for buildings applications, the benefits of those applications, emerging diagnostic technology, examples of field deployments, the relationship to codes and standards, automated diagnostic tools presently available, guidance on how to use automated diagnostics, and related issues.

Download or read book Model based Fault Diagnosis in Dynamic Systems Using Identification Techniques written by Silvio Simani and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety in industrial process and production plants is a concern of rising importance but because the control devices which are now exploited to improve the performance of industrial processes include both sophisticated digital system design techniques and complex hardware, there is a higher probability of failure. Control systems must include automatic supervision of closed-loop operation to detect and isolate malfunctions quickly. A promising method for solving this problem is "analytical redundancy", in which residual signals are obtained and an accurate model of the system mimics real process behaviour. If a fault occurs, the residual signal is used to diagnose and isolate the malfunction. This book focuses on model identification oriented to the analytical approach of fault diagnosis and identification covering: choice of model structure; parameter identification; residual generation; and fault diagnosis and isolation. Sample case studies are used to demonstrate the application of these techniques.

Download or read book Fault Detection and Diagnosis in Industrial Systems written by L.H. Chiang and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Early and accurate fault detection and diagnosis for modern chemical plants can minimize downtime, increase the safety of plant operations, and reduce manufacturing costs. This book presents the theoretical background and practical techniques for data-driven process monitoring. It demonstrates the application of all the data-driven process monitoring techniques to the Tennessee Eastman plant simulator, and looks at the strengths and weaknesses of each approach in detail. A plant simulator and problems allow readers to apply process monitoring techniques.

Download or read book A Dictionary of Business Research Methods written by John Duignan and published by Oxford University Press. This book was released on 2016-02-18 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: This accessible new dictionary provides clear and authoritative definitions of terms, approaches, and techniques in the area of business research methods. It covers research philosophies including research design and qualitative and quantitative methods, types of data and data collection techniques, and organizing and reporting research finding. It is an invaluable resource for students, academics, and professionals learning about research methods as part of a business degree, and undertaking research in many fields including sociology, psychology, and marketing.

Download or read book Sensor Fault Diagnosis written by Vasso Reppa and published by Now Publishers. This book was released on 2016-05-04 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in information and communication technologies, embedded systems and sensor networks have generated significant research activity in the development of so-called cyber-physical systems. An example of a large network of cyber-physical systems is a smart city with intelligent infrastructures for supporting the environment, energy and water distribution, transportation, telecommunication, health care, home automation, and so on. From a systems point of view, safety, reliability and fault tolerance become key challenges in designing cyber-physical systems. One of the major issues is detecting and correcting faults in the sensors that form a critical part of these networks and systems. For example, if two sensors should provide similar information, how do you know which one is at fault should their readings suddenly greatly differ? Sensor Fault Diagnosis addresses all the issues in sensor fault detection and isolation. It provides a clear tutorial on the challenges and models that can be used to address them. It describes, in detail, the requirements for modeling the systems, designing the architecture, detecting faults, isolating those faults, and presents learning techniques for enhancing performance. This monograph will appeal to all researchers and students working on large sensor networks and systems.

Download or read book Automotive Air Conditioning written by Quansheng Zhang and published by Springer. This book was released on 2016-08-10 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents research advances in automotive AC systems using an interdisciplinary approach combining both thermal science, and automotive engineering. It covers a variety of topics, such as: control strategies, optimization algorithms, and diagnosis schemes developed for when automotive air condition systems interact with powertrain dynamics. In contrast to the rapid advances in the fields of building HVAC and automotive separately, an interdisciplinary examination of both areas has long been neglected. The content presented in this book not only reveals opportunities when interaction between on-board HVAC and powertrain is considered, but also provides new findings to achieve performance improvement using model-based methodologies.

Download or read book Advanced Automotive Fault Diagnosis written by Tom Denton and published by Routledge. This book was released on 2006-08-14 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diagnostics, or fault finding, is a fundamental part of an automotive technician's work, and as automotive systems become increasingly complex there is a greater need for good diagnostic skills. Advanced Automotive Fault Diagnosis is the only book to treat automotive diagnostics as a science rather than a check-list procedure. Each chapter includes basic principles and examples of a vehicle system followed by the appropriate diagnostic techniques, complete with useful diagrams, flow charts, case studies and self-assessment questions. The book will help new students develop diagnostic skills and help experienced technicians improve even further. This new edition is fully updated to the latest technological developments. Two new chapters have been added – On-board diagnostics and Oscilloscope diagnostics – and the coverage has been matched to the latest curricula of motor vehicle qualifications, including: IMI and C&G Technical Certificates and NVQs; Level 4 diagnostic units; BTEC National and Higher National qualifications from Edexcel; International Motor Vehicle qualifications such as C&G 3905; and ASE certification in the USA.

Download or read book Model Based Fault Diagnosis Techniques written by Steven X. Ding and published by Springer Science & Business Media. This book was released on 2012-12-20 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guaranteeing a high system performance over a wide operating range is an important issue surrounding the design of automatic control systems with successively increasing complexity. As a key technology in the search for a solution, advanced fault detection and identification (FDI) is receiving considerable attention. This book introduces basic model-based FDI schemes, advanced analysis and design algorithms, and mathematical and control-theoretic tools. This second edition of Model-Based Fault Diagnosis Techniques contains: • new material on fault isolation and identification and alarm management; • extended and revised treatment of systematic threshold determination for systems with both deterministic unknown inputs and stochastic noises; • addition of the continuously-stirred tank heater as a representative process-industrial benchmark; and • enhanced discussion of residual evaluation which now deals with stochastic processes. Model-based Fault Diagnosis Techniques will interest academic researchers working in fault identification and diagnosis and as a text it is suitable for graduate students in a formal university-based course or as a self-study aid for practising engineers working with automatic control or mechatronic systems from backgrounds as diverse as chemical process and power engineering.

Download or read book Advancements in Smart City and Intelligent Building written by Qiansheng Fang and published by Springer. This book was released on 2019-04-03 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book entitled “Advancements in Smart City and Intelligent Building” is the Proceedings of the International Conference on Smart City and Intelligent Building (ICSCIB 2018) held in Hefei, China, September 15-16, 2018. It contains 58 papers in total categorized into 8 different tracks, on Building Energy Efficiency, Construction Robot and Automation, Intelligent Community and Urban Safety, Intelligentialization of Heating Ventilation Air Conditioning System, Information Technology and Intelligent Transportation Systems, New Generation Intelligent Building Platform Techniques, Smart Home and Utility, and Smart Underground Space, which cover a wide range areas of smart cities and intelligent buildings. ICSCIB2018 provided an international forum for professionals, academics, and researchers to present the latest developments from interdisciplinary theoretical studies, computational algorithm developments and engineering applications in smart cities and smart buildings. This academic event featured many opportunities to network with colleagues from around the world in a wonderful environment. Its program covered invitation and presentations from scientists, researchers, and practitioners who have been working in the related areas to establish platforms for collaborative research projects in these fields. The conference invited leaders from industry and academia to exchange and share their experiences, present research results, explore collaborations and to spark new ideas, with the aim of developing new projects and exploiting new technology in these fields, and bridge theoretical studies and emerging applications in various science and engineering branches. This book addresses the recent development and achievement in the field of smart city and intelligent building. It is primarily intended for researchers and students for undergraduate and postgraduate programs in the background of multiple disciplines including computer science, information systems, information technology, automatic control and automation, electrical and electronic engineering, and telecommunications who wish to develop and share their ideas, knowledge and new findings in smart city and intelligent building.

Download or read book Three Approaches to Data Analysis written by Igor Chikalov and published by Springer Science & Business Media. This book was released on 2012-07-28 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the following three approaches to data analysis are presented: - Test Theory, founded by Sergei V. Yablonskii (1924-1998); the first publications appeared in 1955 and 1958, - Rough Sets, founded by Zdzisław I. Pawlak (1926-2006); the first publications appeared in 1981 and 1982, - Logical Analysis of Data, founded by Peter L. Hammer (1936-2006); the first publications appeared in 1986 and 1988. These three approaches have much in common, but researchers active in one of these areas often have a limited knowledge about the results and methods developed in the other two. On the other hand, each of the approaches shows some originality and we believe that the exchange of knowledge can stimulate further development of each of them. This can lead to new theoretical results and real-life applications and, in particular, new results based on combination of these three data analysis approaches can be expected. - Logical Analysis of Data, founded by Peter L. Hammer (1936-2006); the first publications appeared in 1986 and 1988. These three approaches have much in common, but researchers active in one of these areas often have a limited knowledge about the results and methods developed in the other two. On the other hand, each of the approaches shows some originality and we believe that the exchange of knowledge can stimulate further development of each of them. This can lead to new theoretical results and real-life applications and, in particular, new results based on combination of these three data analysis approaches can be expected. These three approaches have much in common, but researchers active in one of these areas often have a limited knowledge about the results and methods developed in the other two. On the other hand, each of the approaches shows some originality and we believe that the exchange of knowledge can stimulate further development of each of them. This can lead to new theoretical results and real-life applications and, in particular, new results based on combination of these three data analysis approaches can be expected.

Download or read book Smart Buildings Systems for Architects Owners and Builders written by James M Sinopoli and published by Butterworth-Heinemann. This book was released on 2009-11-09 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Buildings Systems for Architects, Owners and Builders is a practical guide and resource for architects, builders, engineers, facility managers, developers, contractors, and design consultants. The book covers the costs and benefits of smart buildings, and the basic design foundations, technology systems, and management systems encompassed within a smart building. Unlike other resources, Smart Buildings is organized to provide an overview of each of the technology systems in a building, and to indicate where each of these systems is in their migration to and utilization of the standard underpinnings of a smart building. Written for any professional interested in designing or building smart Buildings systems, this book provides you with the fundamentals needed to select and utilize the most up to date technologies to serve your purpose. In this book, you'll find simple to follow illustrations and diagrams, detailed explanations of systems and how they work and their draw backs. Case studies are used to provide examples of systems and the common problems encountered during instillation. Some simple Repair and Trouble shooting tips are also included. After reading this book, builders, architects and owners will have a solid understanding of how these systems work which of these system is right for their project. Concise and easy to understand, the book will also provide a common language for ensure understanding across the board. Thereby, eliminating confusion and creating a common understanding among professionals. - Ethernet, TCP/IP protocols, SQL datebases, standard fiber optic - Data Networks and Voice Networks - Fire Alarm Systems, Access Control Systems and Video Surveillance Systems - Heating, Ventilating and Air Conditioning Systems and Electric Power Management Systems, Lighting Control Systems - Facility Management Systems

Download or read book Proceedings of the 25th International Symposium on Advancement of Construction Management and Real Estate written by Xinhai Lu and published by Springer Nature. This book was released on 2021-10-11 with total page 1524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings book focuses on innovation, cooperation, and sustainable development in the fields of construction management and real estate. The book provides a detailed analysis and description of the disciplinary frontiers in the field of building management and real estate and how they can be promoted in the context of the epidemic. A wide variety of papers provide a reference value for both scholars and practitioners. The proceedings book is the documentation of “the 25th International Symposium on Advancement of Construction Management and Real Estate” (CRIOCM 2020), which was held at the School of Public Administration, Central China Normal University, Wuhan, China, in 2020.

Download or read book Sensors for Everyday Life written by Subhas Chandra Mukhopadhyay and published by Springer. This book was released on 2016-11-14 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers an up-to-date overview of the concepts, modeling, technical and technological details and practical applications of different types of sensors, and discusses the trends of next generation of sensors and systems for environmental and food engineering. This book is aimed at researchers, graduate students, academics and industry professionals working in the field of environmental and food engineering, environmental monitoring, precision agriculture and food quality control.

Download or read book Information Science and Applications ICISA 2016 written by Kuinam J. Kim and published by Springer. This book was released on 2016-02-15 with total page 1439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected papers from the 7th International Conference on Information Science and Applications (ICISA 2016) and provides a snapshot of the latest issues encountered in technical convergence and convergences of security technology. It explores how information science is core to most current research, industrial and commercial activities and consists of contributions covering topics including Ubiquitous Computing, Networks and Information Systems, Multimedia and Visualization, Middleware and Operating Systems, Security and Privacy, Data Mining and Artificial Intelligence, Software Engineering, and Web Technology. The contributions describe the most recent developments in information technology and ideas, applications and problems related to technology convergence, illustrated through case studies, and reviews converging existing security techniques. Through this volume, readers will gain an understanding of the current state-of-the-art information strategies and technologies of convergence security. The intended readers are researchers in academia, industry and other research institutes focusing on information science and technology.

Download or read book Management of Legionella in Water Systems written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2020-02-20 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Legionnaires' disease, a pneumonia caused by the Legionella bacterium, is the leading cause of reported waterborne disease outbreaks in the United States. Legionella occur naturally in water from many different environmental sources, but grow rapidly in the warm, stagnant conditions that can be found in engineered water systems such as cooling towers, building plumbing, and hot tubs. Humans are primarily exposed to Legionella through inhalation of contaminated aerosols into the respiratory system. Legionnaires' disease can be fatal, with between 3 and 33 percent of Legionella infections leading to death, and studies show the incidence of Legionnaires' disease in the United States increased five-fold from 2000 to 2017. Management of Legionella in Water Systems reviews the state of science on Legionella contamination of water systems, specifically the ecology and diagnosis. This report explores the process of transmission via water systems, quantification, prevention and control, and policy and training issues that affect the incidence of Legionnaires' disease. It also analyzes existing knowledge gaps and recommends research priorities moving forward.

Download or read book Intelligent Fault Diagnosis and Prognosis for Engineering Systems written by George Vachtsevanos and published by Wiley. This book was released on 2006-09-29 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expert guidance on theory and practice in condition-based intelligent machine fault diagnosis and failure prognosis Intelligent Fault Diagnosis and Prognosis for Engineering Systems gives a complete presentation of basic essentials of fault diagnosis and failure prognosis, and takes a look at the cutting-edge discipline of intelligent fault diagnosis and failure prognosis technologies for condition-based maintenance. It thoroughly details the interdisciplinary methods required to understand the physics of failure mechanisms in materials, structures, and rotating equipment, and also presents strategies to detect faults or incipient failures and predict the remaining useful life of failing components. Case studies are used throughout the book to illustrate enabling technologies. Intelligent Fault Diagnosis and Prognosis for Engineering Systems offers material in a holistic and integrated approach that addresses the various interdisciplinary components of the field--from electrical, mechanical, industrial, and computer engineering to business management. This invaluably helpful book: * Includes state-of-the-art algorithms, methodologies, and contributions from leading experts, including cost-benefit analysis tools and performance assessment techniques * Covers theory and practice in a way that is rooted in industry research and experience * Presents the only systematic, holistic approach to a strongly interdisciplinary topic

Download or read book Advances in Production Management Systems Smart Manufacturing for Industry 4 0 written by Ilkyeong Moon and published by Springer. This book was released on 2018-08-24 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set IFIP AICT 535 and 536 constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2018, held in Seoul, South Korea, in August 2018. The 129 revised full papers presented were carefully reviewed and selected from 149 submissions. They are organized in the following topical sections: lean and green manufacturing; operations management in engineer-to-order manufacturing; product-service systems, customer-driven innovation and value co-creation; collaborative networks; smart production for mass customization; global supply chain management; knowledge based production planning and control; knowledge based engineering; intelligent diagnostics and maintenance solutions for smart manufacturing; service engineering based on smart manufacturing capabilities; smart city interoperability and cross-platform implementation; manufacturing performance management in smart factories; industry 4.0 - digital twin; industry 4.0 - smart factory; and industry 4.0 - collaborative cyber-physical production and human systems.