Download or read book Fatigue under Thermal and Mechanical Loading Mechanisms Mechanics and Modelling written by J. Bressers and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Symposium "Fatigue under Thermal and Mechanical Loading", held at Petten (The Netherlands) on May 22-24, 1995, was jointly organized by the Institute for Advanced Materials of The Joint Research Centre, E. C. , and by the Societe Fran~se de Metallurgie et de Materiaux. The fast heating and cooling cycles experienced by many high temperature components cause thermally induced stresses, which often operate in combination with mechanical loads. The resulting thermal / mechanical fatigue cycle leads to material degradation mechanisms and failure modes typical of service cycles. The growing awareness that the synergism between the combined thermal and mechanical loads can not be reproduced by means of isothermal tests, has resulted in an increasing interest in thermal and thermo-mechanical fatigue testing. This trend has been reinforced by the constant pull by industry for more performant, yet safer high temperature systems, pushing the materials to the limit of their properties. Dedicated ASTM meetings in particular have set the scene for this area of research. The proceedings of the symposium organized by D. A. Spera and D. F. Mowbray in 1975 provided a reference book on thermal fatigue which reflects the knowledge and experimental capabilities of the mid-seventies.

Download or read book Fatigue under Thermal and Mechanical Loading Mechanisms Mechanics and Modelling written by J. Bressers and published by Springer. This book was released on 2013-01-18 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Symposium "Fatigue under Thermal and Mechanical Loading", held at Petten (The Netherlands) on May 22-24, 1995, was jointly organized by the Institute for Advanced Materials of The Joint Research Centre, E. C. , and by the Societe Fran~se de Metallurgie et de Materiaux. The fast heating and cooling cycles experienced by many high temperature components cause thermally induced stresses, which often operate in combination with mechanical loads. The resulting thermal / mechanical fatigue cycle leads to material degradation mechanisms and failure modes typical of service cycles. The growing awareness that the synergism between the combined thermal and mechanical loads can not be reproduced by means of isothermal tests, has resulted in an increasing interest in thermal and thermo-mechanical fatigue testing. This trend has been reinforced by the constant pull by industry for more performant, yet safer high temperature systems, pushing the materials to the limit of their properties. Dedicated ASTM meetings in particular have set the scene for this area of research. The proceedings of the symposium organized by D. A. Spera and D. F. Mowbray in 1975 provided a reference book on thermal fatigue which reflects the knowledge and experimental capabilities of the mid-seventies.

Download or read book Thermomechanical fatigue behavior of materials written by Michael J. Verrilli and published by ASTM International. This book was released on 1996 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thermo mechanical Fatigue Behavior of Materials written by Huseyin Sehitoglu and published by ASTM International. This book was released on 2000 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Frontiers in Materials Science written by B. Raj and published by Universities Press. This book was released on 2005 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents contributions by a galaxy of eminent scientists and technologists from the world over in broad spectrum of areas in materials science, providing a global perspective on complex issues of current concern and the direction of research in these areas.

Download or read book Temperature Fatigue Interaction written by L. Remy and published by Elsevier. This book was released on 2002-03-11 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a selection of peer-reviewed papers presented at the International Conference on Temperature-Fatigue Interaction, held in Paris, May 29-31, 2001, organised by the Fatigue Committee of the Societé Française de Métallurgie et de Matériaux (SF2M), under the auspices of the European Structural Integrity Society. The conference disseminated recent research results and promoting the interaction and collaboration amongst materials scientists, mechanical engineers and design engineers. Many engineering components and structures used in the automotive, aerospace, power generation and many other industries experience cyclic mechanical loads at high temperature or temperature transients causing thermally induced stresses. The increase of operating temperature and thermal mechanical loading trigger the interaction with time-dependent phenomena such as creep and environmental effects (oxidation, corrosion). A large number of metallic materials were investigated including aluminium alloys for the automotive industry, steels and cast iron for the automotive industry and materials forming, stainless steels for power plants, titanium, composites, intermetallic alloys and nickel base superalloys for aircraft industry, polymers. Important progress was observed in testing practice for high temperature behaviour, including environment and thermo-mechanical loading as well as in observation techniques. A large problem which was emphasized is to know precisely service loading cycles under non-isothermal conditions. This was considered critical for numerous thermal fatigue problems discussed in this conference.

Download or read book Thermomechanical Fatigue Behavior of Materials written by Michael A. McGaw and published by ASTM International. This book was released on 2003 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: "ASTM Stock Number: STP1428. - "Fourth Symposium on Thermomechanical Fatigue Behavior of Materials, held in Dallas, Texas on November 7-8, 2001. The Symposium was sponsored by ASTM Committee E08 on Fatigue and Fracture and its Subcommittee E08.05 on Cyclic Deformation and Fat. - Includes bibliographical references and indexes. ASTM International; 2011.

Download or read book Hydrogen Recycling at Plasma Facing Materials written by C.H. Wu and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the most important issues in the construction of future magnetic confinement fusion machines is that of the materials of which they are constructed, and one of the key points of proper material choice is the recycle of hydrogen isotopes with materials at the plasma face. Tritium machines demand high safety and economy, which in turn requires the lowest possible T inventory and smallest possible permeation through the plasma facing materials. The recycle behaviour of the in-vessel components must also be known if the plasma reaction is to predictable and controllable, and finally, the fuel cycle and plasma operating regimes may be actively controlled by special materials and methods. The book discusses both laboratory experiments exploring the basic properties of non-equilibrium hydrogen-solid systems (diffusion, absorption, boundary processes) and experimental results obtained from existing fusion machines under conditions simulating future situations to some extent. Contributions are from experts in the fields of nuclear fusion, materials science, surface science, vacuum science and technology, and solid state physics.

Download or read book Local Strain and Temperature Measurement written by J Ziebs and published by Woodhead Publishing. This book was released on 1999-03-05 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of a symposium held in Berlin in March 1996, drawing together practical expertise in measurement techniques, with typical applications ranging from in situ measurements of strain and rotation on small specimens through notched specimens and single crystal up to turbine blade shaped samples and full scale component testing. The symposium also highlighted new techniques such as speckle interferometry and image analysis.

Download or read book ECCM 8 European Conference on Composite Materials written by Ignazio Crivelli Visconti and published by Woodhead Publishing. This book was released on 1998 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nickel Base Single Crystals Across Length Scales written by Loeïz Nazé and published by Elsevier. This book was released on 2021-09-28 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nickel Base Single Crystals Across Length Scales is addresses the most advanced knowledge in metallurgy and computational mechanics and how they are applied to superalloys used as bare materials or with a thermal barrier coating system. Joining both aspects, the book helps readers understand the mechanisms driving properties and their evolution from fundamental to application level. These guidelines are helpful for students and researchers who wish to understand issues and solutions, optimize materials, and model them in a cross-check analysis, from the atomistic to component scale. The book is useful for students and engineers as it explores processing, characterization and design. Provides an up-to-date overview on the field of superalloys Covers the relationship between microstructural evolution and mechanical behavior at high temperatures Discusses both basic and advanced modeling and characterization techniques Includes case studies that illustrate the application of techniques presented in the book

Download or read book Thermal Fatigue of Materials and Components written by David A. Spera and published by ASTM International. This book was released on 1976 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thermomechanical Fatigue and Fracture written by M. H. Aliabadi and published by Computational Mechanics. This book was released on 2002 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text covers the leading research, in computational methods and experimental measurements, in thermal and mechanical fatigue problems. One of the fracture problems found in engineering components, such as pressure vessels, high temperature engines and interfaces in computer technology.

Download or read book Comprehensive Structural Integrity Cyclic loading and fatigue written by I. Milne and published by Elsevier. This book was released on 2003 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Mechanics of Constitutive Modeling written by Niels Saabye Ottosen and published by Elsevier. This book was released on 2005-09-28 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Constitutive modelling is the mathematical description of how materials respond to various loadings. This is the most intensely researched field within solid mechanics because of its complexity and the importance of accurate constitutive models for practical engineering problems. Topics covered include: Elasticity - Plasticity theory - Creep theory - The nonlinear finite element method - Solution of nonlinear equilibrium equations - Integration of elastoplastic constitutive equations - The thermodynamic framework for constitutive modelling – Thermoplasticity - Uniqueness and discontinuous bifurcations • More comprehensive in scope than competitive titles, with detailed discussion of thermodynamics and numerical methods. • Offers appropriate strategies for numerical solution, illustrated by discussion of specific models. • Demonstrates each topic in a complete and self-contained framework, with extensive referencing.

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1992 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Comprehensive Structural Integrity written by Ian Milne and published by Elsevier. This book was released on 2003-07-25 with total page 4647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this major reference work is to provide a first point of entry to the literature for the researchers in any field relating to structural integrity in the form of a definitive research/reference tool which links the various sub-disciplines that comprise the whole of structural integrity. Special emphasis will be given to the interaction between mechanics and materials and structural integrity applications. Because of the interdisciplinary and applied nature of the work, it will be of interest to mechanical engineers and materials scientists from both academic and industrial backgrounds including bioengineering, interface engineering and nanotechnology. The scope of this work encompasses, but is not restricted to: fracture mechanics, fatigue, creep, materials, dynamics, environmental degradation, numerical methods, failure mechanisms and damage mechanics, interfacial fracture and nano-technology, structural analysis, surface behaviour and heart valves. The structures under consideration include: pressure vessels and piping, off-shore structures, gas installations and pipelines, chemical plants, aircraft, railways, bridges, plates and shells, electronic circuits, interfaces, nanotechnology, artificial organs, biomaterial prostheses, cast structures, mining... and more. Case studies will form an integral part of the work.