Download or read book Fatigue of Structures and Materials written by J. Schijve and published by Springer Science & Business Media. This book was released on 2008-12-16 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue of structures and materials covers a wide scope of different topics. The purpose of the present book is to explain these topics, to indicate how they can be analyzed, and how this can contribute to the designing of fatigue resistant structures and to prevent structural fatigue problems in service. Chapter 1 gives a general survey of the topic with brief comments on the signi?cance of the aspects involved. This serves as a kind of a program for the following chapters. The central issues in this book are predictions of fatigue properties and designing against fatigue. These objectives cannot be realized without a physical and mechanical understanding of all relevant conditions. In Chapter 2 the book starts with basic concepts of what happens in the material of a structure under cyclic loads. It illustrates the large number of variables which can affect fatigue properties and it provides the essential background knowledge for subsequent chapters. Different subjects are presented in the following main parts: • Basic chapters on fatigue properties and predictions (Chapters 2–8) • Load spectra and fatigue under variable-amplitude loading (Chapters 9–11) • Fatigue tests and scatter (Chapters 12 and 13) • Special fatigue conditions (Chapters 14–17) • Fatigue of joints and structures (Chapters 18–20) • Fiber-metal laminates (Chapter 21) Each chapter presents a discussion of a speci?c subject.
Download or read book Al Alloy 2024 T4 Cumulative Biaxial Fatigue under Complex Loading written by Wael Abdulmajeed and published by GRIN Verlag. This book was released on 2013-04-22 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master's Thesis from the year 1997 in the subject Engineering - Mechanical Engineering, , language: English, abstract: A study of metal cumulative fatigue damage at multilevel stress programs using 2024- T 4 AI -Alloy is carried out in this investigation. Specimens are designed and fabricated. The tests are performed under multiaxial fatigue in phase combined loading bending and torsion, with zero mean stress (R=-l) at room temperature. Five groups of multiaxial fatigue experiments are performed, constant amplitude, linear increasing and decreasing, Low-High loading sequence, High-Low loading sequence and equivalent flight loading fatigue. Prediction of life specimens are studied at three methods: Palmgren-Miner, Corten - Dolan, and Marsh. The methods are conservative to some specimens and non-conservative to another. The effects of stage life (ns) have been examined and fatigue life of specimens are decreased when the stage life is decreased. Comparisons between High-Low & Low-High loading sequences in fatigue life (multi stress level) have been investigated. The Low-High loading sequence is less dangerous than High-Low loading sequence at the same stress range (equal loading stages). Studies the effect of stress range fatigue life have been investigated and the fatigue life is decreased with increasing the stress range fatigue (having the same lowest stress). For the fatigue of equivalent flight loading, the life is depend basically on stress range and the cruising interval this two parameters have been studied.
Download or read book Fatigue under Thermal and Mechanical Loading Mechanisms Mechanics and Modelling written by J. Bressers and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Symposium "Fatigue under Thermal and Mechanical Loading", held at Petten (The Netherlands) on May 22-24, 1995, was jointly organized by the Institute for Advanced Materials of The Joint Research Centre, E. C. , and by the Societe Fran~se de Metallurgie et de Materiaux. The fast heating and cooling cycles experienced by many high temperature components cause thermally induced stresses, which often operate in combination with mechanical loads. The resulting thermal / mechanical fatigue cycle leads to material degradation mechanisms and failure modes typical of service cycles. The growing awareness that the synergism between the combined thermal and mechanical loads can not be reproduced by means of isothermal tests, has resulted in an increasing interest in thermal and thermo-mechanical fatigue testing. This trend has been reinforced by the constant pull by industry for more performant, yet safer high temperature systems, pushing the materials to the limit of their properties. Dedicated ASTM meetings in particular have set the scene for this area of research. The proceedings of the symposium organized by D. A. Spera and D. F. Mowbray in 1975 provided a reference book on thermal fatigue which reflects the knowledge and experimental capabilities of the mid-seventies.
Download or read book Development of Fatigue Loading Spectra written by John M. Potter and published by ASTM International. This book was released on 1989 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multiaxial Fatigue written by Darrell Socie and published by SAE International. This book was released on 1999-12-15 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides practicing engineers, researchers, and students with a working knowledge of the fatigue design process and models under multiaxial states of stress and strain. Readers are introduced to the important considerations of multiaxial fatigue that differentiate it from uniaxial fatigue.
Download or read book Fatigue Life Prediction of Composites and Composite Structures written by Anastasios P. Vassilopoulos and published by Woodhead Publishing. This book was released on 2019-10-08 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue Life Prediction of Composites and Composite Structures, Second Edition, is a comprehensive review of fatigue damage and fatigue life modeling and prediction methodologies for composites and their use in practice. In this new edition, existing chapters are fully updated, while new chapters are introduced to cover the most recent developments in the field. The use of composites is growing in structural applications in many industries, including aerospace, marine, wind turbine and civil engineering. However, there are uncertainties about their long-term performance, including performance issues relating to cyclic fatigue loading that hinder the adoption of a commonly accepted credible fatigue design methodology for the life prediction of composite engineering structures. With its distinguished editor and international team of contributors, this book is a standard reference for industry professionals and researchers alike. - Examines past, present and future trends associated with the fatigue life prediction of composite materials and structures - Assesses novel computational methods for fatigue life modeling and prediction of composite materials under constant amplitude loading - Covers a wide range of techniques for predicting fatigue, including their theoretical background and practical applications - Addresses new topics and covers contemporary research developments in the field
Download or read book Failure of Materials in Mechanical Design written by Jack A. Collins and published by John Wiley & Sons. This book was released on 1993-10-06 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failure of Materials in Mechanical Design: Analysis, Prediction, Prevention, 2nd Edition, covers the basic principles of failure of metallic and non-metallic materials in mechanical design applications. Updated to include new developments on fracture mechanics, including both linear-elastic and elastic-plastic mechanics. Contains new material on strain and crack development and behavior. Emphasizes the potential for mechanical failure brought about by the stresses, strains and energy transfers in machine parts that result from the forces, deflections and energy inputs applied.
Download or read book Fatigue of Materials at Very High Numbers of Loading Cycles written by Hans-Jürgen Christ and published by Springer Spektrum. This book was released on 2018-12-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents the final reports of the scientific projects funded within the DFG-SPP1466 and, hence, provides the reader with the possibility to familiarize with the leading edge of VHCF research. It draws a balance on the existing knowledge and its enhancement by the joint research action of the priority program. Three different material classes are dealt with: structural metallic materials, long-fiber-reinforced polymers and materials used in micro-electro-mechanical systems. The project topics address the development of suitable experimental techniques for high-frequency testing and damage monitoring, the characterization of damage mechanisms and damage evolution, the development of mechanism-based models and the transfer of the obtained knowledge and understanding into engineering regulations and applications.
Download or read book Effect of Load Variables on Fatigue Crack Initiation and Propagation written by D. F. Bryan and published by ASTM International. This book was released on 1980 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Vibration and Shock Analysis Fatigue Damage written by Christian Lalanne and published by John Wiley & Sons. This book was released on 2014-04-16 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue damage in a system with one degree of freedom is one of the two criteria applied when comparing the severity of vibratory environments. The same criterion is also used for a specification representing the effects produced by the set of vibrations imposed in a real environment. In this volume, which is devoted to the calculation of fatigue damage, Christian Lalanne explores the hypotheses adopted to describe the behavior of material affected by fatigue and the laws of fatigue accumulation. The author also considers the methods for counting response peaks, which are used to establish the histogram when it is not possible to use the probability density of the peaks obtained with a Gaussian signal. The expressions for mean damage and its standard deviation are established and other hypotheses are tested.
Download or read book Advanced Testing and Characterization of Bituminous Materials Two Volume Set written by Andreas Loizos and published by CRC Press. This book was released on 2009-05-14 with total page 1318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bituminous materials are used to build durable roads that sustain diverse environmental conditions. However, due to their complexity and a global shortage of these materials, their design and technical development present several challenges. Advanced Testing and Characterisation of Bituminous Materials focuses on fundamental and performance testing
Download or read book A Course on Damage Mechanics written by Jean Lemaitre and published by Springer Science & Business Media. This book was released on 2013-12-14 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new branch of science usually develops thus. Somebody publishes the basic ideas. Hesitatingly at first, then little by little, other original contributions appear, until a certain threshold is reached. Then, overview articles are printed, conferences are held, and a first mention is made in textbooks, until specialized monographs are written. Continuum darnage mechanics has reached that status now. To analyze or, if possible, to predict the failure of machine parts or other structures is one of the main goals of engineering science. Consequently fracture mechanics became one of its leading branches. It was based on the analysis of existing cracks. However, especially under conditions of cyclic loading, this might be too late to prevent a disaster. Therefore, the question regarding the precursory state, that is, the evolution of intemal darnage before macrocracks become visible, was then posed. One of the successful approaches to the problern was Weibull's theory which examined, in a statistical manner, the "weakest link" in the material volume under consideration. Unfortunately it proved too difficult mathematically to be applied to complicated parts or structures. Therefore it was highly appreciated by the scientific of material community when L. M. Kachanov published in 1958 a simple model darnage which subsequently could be extended to brittle elastic, plastic or viscous materials under all conditions of uniaxial or multiaxial, simple or cyclic loadings, so that it may be considered nearly universal.
Download or read book Highway Safety Literature written by and published by . This book was released on 1978 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue and Fracture of Traditional and Advanced Structural Alloys written by Filippo Berto and published by MDPI. This book was released on 2021-04-01 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fatigue behavior of traditional and advanced materials is a very relevant topic in different strategic applications impacting and affecting our daily lives. The present Special Issue invites papers to update readers on the state of the art on this important topic. Both review and original manuscripts are welcome. Special attention will be dedicated to innovative materials and innovative manufacturing processes or post-treatments able to improve the fatigue life and reliability of a structural component. Scale effect will be also fully treated focusing on different applications and multiscale approaches aimed at understanding structural integrity under cyclic loadings. This state of the art perspective will help engineers, designers and people from the academy gain an updated view on this very challenging topic which is nowadays very important due to the advances in manufacturing technologies that allow complex new materials to be fabricated.
Download or read book Experiments in Fatigue Under Ranges of Stress in Torsion and Axial Load from Tension to Extreme Compression written by William Nichols Findley and published by . This book was released on 1954 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Current Advances in Mechanical Design and Production VII written by M.F. Hassan and published by Elsevier. This book was released on 2000-01-31 with total page 665 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on Mechanical Design and Production has over the years established itself as an excellent forum for the exchange of ideas in these established fields. The first of these conferences was held in 1979. The seventh, and most recent, conference in the series was held in Cairo during February 15-17, 2000. International engineers and scientists gathered to exchange experiences and highlight the state-of-the-art research in the fields of mechanical design and production. In addition a heavy emphasis was placed on the issue of technology transfer. Over 100 papers were accepted for presentation at the conference. Current Advances in Mechanical Design & Production VII does not, however, attempt to publish the complete work presented but instead offers a sample that represents the quality and breadth of both the work and the conference. Ten invited papers and 54 ordinary papers have been selected for inclusion in these proceedings. They cover a range of basic and applied topics that can be classified into six main categories: System Dynamics, Solid Mechanics, Material Science, Manufacturing Processes, Design and Tribology, and Industrial Engineering and its Applications.
Download or read book Computational Methods In Engineering Advances Applications Proceedings Of The International Conference In 2 Volumes written by Khin-yong Lam and published by World Scientific. This book was released on 1992-10-29 with total page 1556 pages. Available in PDF, EPUB and Kindle. Book excerpt:
