Download or read book Multiaxial Notch Fatigue written by Luca Susmel and published by Elsevier. This book was released on 2009-03-20 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal and composite components used in structural engineering not only contain geometrical features resulting in stress concentration phenomena, but they are also subjected to in-service multiaxial fatigue loading. To address the problem, structural engineers need reliable methodologies which allow for an adequate margin of safety. The book summarises methods devised by the author to design real components against multiaxial fatigue by taking full advantage not only of nominal but also of local stress-strain quantities.The book begins by reviewing definitions suitable for calculating the stress-strain quantities commonly used to perform fatigue assessment. The Modified Wöhler Curve Method is then explained in detail, by focusing attention on both the high- and the medium-cycle fatigue regime. The existing links between the multiaxial fatigue criterion and physical properties are also discussed. A procedure suitable for employing the method developed by the author to estimate fatigue damage both in notched and in welded components is explained. The Modified Manson-Coffin Curve method is investigated in depth, by reviewing those concepts playing a fundamental role in the so-called strain based approach. Lastly, the problem of performing the fatigue assessment of composite materials is addressed by considering design parameters influencing composite behaviour under complex cyclic loading paths and those criteria suitable for designing real components against multiaxial fatigue. The book also contains two appendices summarising experimental data from the technical literature. These appendices provide a unique and highly valuable resource for engineers. The appendices summarise around 100 values of the material characteristic length L, experimentally determined by testing specimens made of different engineering materials and about 4500 experimental fatigue results generated by testing plain, notched and welded specimens under constant-amplitude proportional and non-proportional multiaxial fatigue loading are listed. - Summarises methods devised by the author to design real components against multiaxial fatigue - Reviews definitions suitable for calculating the stress-strain quantities commonly used to perform fatigue assessment - Includes an in-depth explanation of both the Modified Wöhler Curve and Modified Manson-Coffin Curve Method

Download or read book Multiaxial Notch Fracture and Fatigue written by Xiangqiao Yan and published by CRC Press. This book was released on 2023-02-28 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the unified fatigue life prediction equation for low/medium/high cycle fatigue of metallic materials relevant to plain materials and notched components. The unified fatigue life prediction equation is the Wöhler equation, in which the "stress-based intensity parameter" is calculated based on the linear-elastic analysis. A local approach for the static fracture analysis for notched components is presented based on the notch linear-elastic stress field. In the local approach, a stress intensity parameter is taken as a stress-based intensity parameter. Experimental verifications show that the local approach is also suited for the static fracture analysis for notched components made of ductile materials. The book is also concerned with a material failure problem under the multiaxial stress states. A concept of the material intensity parameter is introduced in this book. It is a material property parameter that depends on both Mode-I fracture toughness and Mode-II (or Mode-III) fracture toughness and the multiaxial parameter to characterize the variation of the material failure resistance (notch fracture toughness) with the multiaxial stresses states. The failure condition to assess mixed-mode fracture of notched (or cracked) components is stated as the stress-based intensity parameter being equal to the material intensity parameter. With respect to the traditional S-N equation, a similar S-N equation is presented and verified to have high accuracy. This book will be of interest to professionals in the field of fatigue and fracture for both brittle and ductile materials.

Download or read book Multiaxial Fatigue and Fracture written by E. Macha and published by Elsevier. This book was released on 1999-09-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 18 papers selected from 90 presented at the Fifth International Conference on Biaxial/Multiaxial Fatigue and Fracture held in Cracow, Poland 8-12 September 1997. The papers in this book deal with theoretical, computational and experimental aspects of the multiaxial fatigue and fracture of engineering materials and structures. The papers are divided into the following four categories: 1. Proportional cyclic loading 2. Non-proportional cyclic loading 3. Variable amplitude and random loading 4. Crack growthMost papers in this publication talk about the behaviour of constructional materials and elements of machines under non-proportional loading and under variable amplitude and random loading, which are more realistic load histories met in industrial practice. Variable amplitude loading under cyclic load with basic frequency and random loading under load with a continuous band of frequency is classified here. This book gives a review of the latest world success and directions of investigations on multiaxial fatigue and fracture. More and more often publications are results of the co-operation of researchers from different laboratories and countries. Seven out of eighteen papers included here were worked out by international authors teams. This is a symptom of the times, when science and investigations know no borders.

Download or read book Fatigue multiaxiale en endurance de l acier 30 NCD 16 written by Catherine Froustey and published by . This book was released on 1987 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: De nombreux critères de dimensionnement en fatigue multiaxiale sont proposes dans la bibliographie mais leur validité n'est pas démontrée car trop peu d'essais ont été effectues dans ce domaine. Une machine susceptible de réaliser des essais de fatigue sous chargements simples, radiaux et complexes a été mise au point et est décrite dans son principe. Ce prototype permet d'imposer à une éprouvette des sollicitations de flexion dissymétrique et de torsion combinées; ces sollicitations peuvent être en phase ou non, à la même fréquence ou non. Les essais ont été réalises sur un acier utilise en construction aéronautique: l'acier 30 ncd 16. Les résultats obtenus permettent de discuter de la validité des trois critères retenus pour cette étude (sines, crossland, dang van). Une expression dérivée d'un modèle existant est proposée ainsi qu'une méthode de dimensionnement simple corrélant l'ensemble de ces résultats d'essais. Cette dernière méthode semble plus fiable que les critères étudient mais demande une justification théorique et une validation dans des cas de chargements autres que flexion torsion combinées

Download or read book Frattura ed Integrit Strutturale Annals 2011 written by Francesco Iacoviello and published by Gruppo Italiano Frattura. This book was released on 2011-12-20 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Alloys Index written by and published by . This book was released on 1988 with total page 1058 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metals Abstracts written by and published by . This book was released on 1992 with total page 1592 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Cycle Metal Fatigue written by Ky Dang Van and published by Springer. This book was released on 2014-05-04 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the high-cycle fatigue behaviour of metal components, thus covering essential needs of current industrial design. The new developments included in the book rely on the use of the mesoscopic scale approach in metal fatigue and allow the specific handling of such difficult fatigue problems as multiaxial, non-proportional loading conditions.

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1989 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Notch Effects in Fatigue and Fracture written by G. Pluvinage and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: As Directors of this NATO Workshop, we welcome this opportunity to record formally our thanks to the NATO Scientific Affairs Division for making our meeting possible through generous financial support and encouragement. This meeting has two purposes: the first obvious one because we have collected scientists from East, far East and west to discuss new development in the field of fracture mechanics: the notch fracture mechanics. The second is less obvious but perhaps in longer term more important that is the building of bridges between scientists in the frame of a network called Without Walls Institute on Notch Effects in Fatigue and Fracture". Physical perception of notch effects is not so easy to understand as the presence of a geometrical discontinuity as a worst effect than the simple reduction of cross section. Notch effects in fatigue and fracture is characterised by the following fundamental fact: it is not the maximum local stress or stress which governs the phenomena of fatigue and fracture. The physic shows that a process volume is needed probably to store the necessary energy for starting and propagating the phenomenon. This is a rupture of the traditional "strength of material" school which always give the prior importance of the local maximum stress. This concept of process volume was strongly affirmed during this workshop.

Download or read book Natural Fibers Plastics and Composites written by Frederick T. Wallenberger and published by Springer Science & Business Media. This book was released on 2011-06-28 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book International Aerospace Abstracts written by and published by . This book was released on 1989 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dorland s Dictionary of Medical Acronyms and Abbreviations written by Dorland and published by Elsevier Health Sciences. This book was released on 2015-07-24 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Medical acronyms and abbreviations offer convenience, but those countless shortcuts can often be confusing. Now a part of the popular Dorland's suite of products, this reference features thousands of terms from across various medical specialties. Its alphabetical arrangement makes for quick reference, and expanded coverage of symbols ensures they are easier to find. Effective communication plays an important role in all medical settings, so turn to this trusted volume for nearly any medical abbreviation you might encounter. - Symbols section makes it easier to locate unusual or seldom-used symbols. - Convenient alphabetical format allows you to find the entry you need more intuitively. - More than 90,000 entries and definitions. - Many new and updated entries including terminology in expanding specialties, such as Nursing; Physical, Occupational, and Speech Therapies; Transcription and Coding; Computer and Technical Fields. - New section on abbreviations to avoid, including Joint Commission abbreviations that are not to be used. - Incorporates updates suggested by the Institute for Safe Medication Practices (ISMP).

Download or read book Fatigue of Materials and Structures written by Claude Bathias and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of mechanical structures with improved and predictable durability cannot be achieved without a thorough understanding of the mechanisms of fatigue damage and more specifically the relationships between the microstructure of materials and their fatigue properties. Written by leading experts in the field, this book (which is complementary to Fatigue of Materials and Structures: Application to Damage and Design, also edited by Claude Bathias and André Pineau), provides an authoritative, comprehensive and unified treatment of the mechanics and micromechanisms of fatigue in metals, polymers and composites. Each chapter is devoted to one of the major classes of materials or to different types of fatigue damage, thereby providing overall coverage of the field. The book deals with crack initiation, crack growth, low-cycle fatigue, gigacycle fatigue, shorts cracks, fatigue micromechanisms and the local approach to fatigue damage, corrosion fatigue, environmental effects and variable amplitude loadings, and will be an important and much used reference for students, practicing engineers and researchers studying fracture and fatigue in numerous areas of mechanical, structural, civil, design, nuclear, and aerospace engineering as well as materials science.

Download or read book Fatigue of Metallic Materials written by M. Klesnil and published by Elsevier. This book was released on 1992-04-13 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews problems in the mechanical behaviour of cyclically loaded metallic materials, primarily with regard to the nature of the fatigue process. The first edition of the book appeared in 1980. The present second edition represents a revised form of the original book and also covers recent developments in the field. As the book focuses on physical-metallurgical aspects, it occupies a unique and important position in the technical literature, which has so far been devoted mainly to engineering metal fatigue problems and their technical solution in specific practical cases. The book provides a compact review of current knowledge on physical metallurgical processes that accompany and affect the fatigue of metallic materials, and also presents the background for applying the new results to practical designing and to the selection of materials in engineering practice. The authors present an updated review of results from countries both in the east and the west and cover a relatively large field in a concise manner. The work will be of value to research workers and students following advanced and post-graduate courses in the fields of materials science and mechanical engineering.

Download or read book Dictionary of Medical Acronyms and Abbreviations written by Stanley Jablonski and published by Hanley & Belfus. This book was released on 2004-09 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This dictionary lists acronyms and abbreviations occurring with a reasonable frequency in the literature of medicine and the health care professions. Abbreviations and acronyms are given in capital letters, with no punctuation, and with concise definitions. The beginning sections also include symbols, genetic symbols, and the Greek alphabet and symbols.

Download or read book The Fatigue of Metals written by Herbert John Gough and published by . This book was released on 1924 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: