Download or read book Biaxial Multiaxial Fatigue and Fracture written by Andrea Carpinteri and published by Elsevier. This book was released on 2003-03-19 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European Structural Integrity Society (ESIS) Technical Commitee on Fatigue of Engineering Materials and Structures (TC3) decided to compile a Special Technical Publication (ESIS STP) based on the 115 papers presented at the 6th International Conference on Biaxial/Multiaxial Fatigue and Fracture. The 25 papers included in the STP have been extended and revised by the authors. The conference was held in Lisbon, Portugal, on 25-28 June 2001, and was chaired by Manual De Freitas, Instituto Superior Tecnico, Lisbon. The meeting, organised by the Instituto Superior Tecnico and sponsored by the Portuguese Minesterio da Cienca e da Tecnologia and by the European Structural Integrity Society, was attended by 151 delegates from 20 countries. The papers in the present book deal with the theoretical, numerical and experimental aspects of the Multiaxial fatigue and fracture of engineering materials and structures. They are divided in to the following six sections; Multiaxial Fatigue of Welded Structures; High cycle Multiaxial fatigue; Non proportional and Variable-Amplitude loading; Defects, Notches, Crack Growth; Low Cycle Multiaxial Fatigue; Applications and Testing Methods. As is well-known, most engineering components and structures in the mechanical, aerospace, power generation, and other industries are subjected to multiaxial loading during their service life. One of the most difficult tasks in design against fatigue and fracture is to translate the information gathered from uniaxial fatigue and fracture tests on engineering materials into applications involving complex states of cyclic stress-strain conditions. This book is the result of co-operation between many researchers from different laboratories, universities and industries in a number of countries.

Download or read book Multiaxial Fatigue and Deformation written by Sreeramesh Kalluri and published by ASTM International. This book was released on 2000 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains papers from a May 1999 symposium, describing state-of-the-art multiaxial testing techniques and analytical methods for characterizing fatigue and deformation behaviors of engineering materials. Papers are classified into sections on multiaxial strength of materials, multiaxial deformation,

Download or read book Multiaxial Fatigue written by Darrell Socie and published by SAE International. This book was released on 1999-12-15 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides practicing engineers, researchers, and students with a working knowledge of the fatigue design process and models under multiaxial states of stress and strain. Readers are introduced to the important considerations of multiaxial fatigue that differentiate it from uniaxial fatigue.

Download or read book Advances in Multiaxial Fatigue written by David L. McDowell and published by ASTM International. This book was released on 1993 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers presented at the ASTM Symposium on Multiaxial Fatigue, held in San Diego, November 1991, to communicate the most recent international advances in multiaxial cyclic deformation and fatigue research as well as applications to component analysis and design. The 24 papers are grouped into five ca

Download or read book Multiaxial Fatigue written by Keith John Miller and published by ASTM International. This book was released on 1985 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Multiaxial Fatigue written by and published by . This book was released on 1985 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Multiaxial Fatigue and Deformation Testing Techniques written by and published by . This book was released on 1911 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Multiaxial Notch Fatigue written by L. Susmel and published by CRC Press. This book was released on 2009-04-20 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A summary of methods for designing real components against multiaxial fatigue, this book explains the Modified Wöhler Curve Method, focusing attention on both the high- and the medium-cycle fatigue regime, and discusses the existing links between the multiaxial fatigue criterion and physical properties. The author explains how to employ the method he developed to estimate fatigue damage in notched and welded components. He investigates the Modified Manson-Coffin Curve method and includes about 4500 experimental fatigue results generated by testing plain, notched, and welded specimens under constant-amplitude proportional and non-proportional multiaxial fatigue loading.

Download or read book Biaxial and Multiaxial Fatigue EGF 3 written by M. W. Brown and published by . This book was released on 1989 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 36 paper spresented in this volume were presented at the second international conference on biaxial/multiaxial fatigue.

Download or read book Multiaxial Fatigue written by Gail E. Leese and published by . This book was released on 1989 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fatigue Design of Welded Joints and Components written by A Hobbacher and published by Woodhead Publishing. This book was released on 1996-10-31 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: These recommendations present general methods for the assessment of fatigue damage in welded components, which may affect the limit states of a structure, such as ultimate limit state and serviceability limited state. Fatigue resistance data is given for welded components made of wrought or extruded products of ferritic/pearlitic or banitic structural steels up to fy = 700 Mpa and of aluminium alloys commonly used for welded structures.

Download or read book Creep Resistant Steels written by Fujio Abe and published by Elsevier. This book was released on 2008-03-14 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creep-resistant steels are widely used in the petroleum, chemical and power generation industries. Creep-resistant steels must be reliable over very long periods of time at high temperatures and in severe environments. Understanding and improving long-term creep strength is essential for safe operation of plant and equipment. This book provides an authoritative summary of key research in this important area.The first part of the book describes the specifications and manufacture of creep-resistant steels. Part two covers the behaviour of creep-resistant steels and methods for strengthening them. The final group of chapters analyses applications in such areas as turbines and nuclear reactors.With its distinguished editors and international team of contributors, Creep-resistant steels is a valuable reference for the power generation, petrochemical and other industries which use high strength steels at elevated temperatures. - Describes the specifications and manufacture of creep-resistant steels - Strengthening methods are discussed in detail - Different applications are analysed including turbines and nuclear reactors

Download or read book Power Piping written by Charles Becht (IV.) and published by American Society of Mechanical Engineers. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This essential new volume provides background information, historical perspective, and expert commentary on the ASME B31.1 Code requirements for power piping design and construction. It provides the most complete coverage of the Code that is available today and is packed with additional information useful to those responsible for the design and mechanical integrity of power piping. The author, Dr. Becht, is a long-serving member of ASME piping code committees and is the author of the highly successful book, Process Piping: The Complete Guide to ASME B31.3, also published by ASME Press and now in its third edition. Dr. Becht explains the principal intentions of the Code, covering the content of each of the Code's chapters. Book inserts cover special topics such as spring design, design for vibration, welding processes and bonding processes. Appendices in the book include useful information for pressure design and flexibility analysis as well as guidelines for computer flexibility analysis and design of piping systems with expansion joints. From the new designer wanting to know how to size a pipe wall thickness or design a spring to the expert piping engineer wanting to understand some nuance or intent of the Code, everyone whose career involves process piping will find this to be a valuable reference.

Download or read book Wheel Rail Interface Handbook written by R. Lewis and published by Elsevier. This book was released on 2009-09-25 with total page 865 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many of the engineering problems of particular importance to railways arise at interfaces and the safety-critical role of the wheel/rail interface is widely acknowledged. Better understanding of wheel/rail interfaces is therefore critical to improving the capacity, reliability and safety of the railway system.Wheel-rail interface handbook is a one-stop reference for railway engineering practitioners and academic researchers. Part one provides the fundamentals of contact mechanics, wear, fatigue and lubrication as well as state-of-the-art research and emerging technologies related to the wheel/rail interface and its management. Part two offers an overview of industrial practice from several different regions of the world, thereby providing an invaluable international perspective with practitioners' experience of managing the wheel/rail interface in a variety of environments and circumstances.This comprehensive volume will enable practising railway engineers, in whatever discipline of railway engineering – infrastructure, vehicle design and safety, and so on – to enhance their understanding of wheel/rail issues, which have a major influence on the running of a reliable, efficient and safe railway. - One-stop reference on the important topic of wheel rail-interfaces - Presents the fundamentals of contact mechanics, wear, fatigue and lubrication - Examines state-of-the-art research and emerging technologies related to wheel-rail interface and its management

Download or read book Principles of Hyperplasticity written by Guy T. Houlsby and published by Springer Science & Business Media. This book was released on 2007-04-18 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: The approach to plasticity theory developed here is firmly rooted in thermodynamics. Emphasis is placed on the use of potentials and the derivation of incremental response, necessary for numerical analysis. The derivation of constitutive models for irreversible behaviour entirely from two scalar potentials is shown. The use of potentials allows models to be very simply defined, classified and, if necessary, developed and it permits dependent and independent variables to be interchanged, making possible different forms of a model for different applications. The theory is extended to include treatment of rate-dependent materials and a powerful concept, in which a single plastic strain is replaced by a plastic strain function, allowing smooth transitions between elastic and plastic behaviour is introduced. This monograph will benefit academic researchers in mechanics, civil engineering and geomechanics and practising geotechnical engineers; it will also interest numerical analysts in engineering mechanics.

Download or read book Metal and Ceramic Matrix Composites written by Brian Cantor and published by CRC Press. This book was released on 2003-11-01 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from leading experts in their respective fields, Metal and Ceramic Matrix Composites provides a comprehensive overview of topics on specific materials and trends. It is a subject regularly included as a final year option in materials science courses and is also of much industrial and academic interest. The book begins wit

Download or read book IUTAM Symposium on Creep in Structures written by S. Murakami and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings contain 48 innovative papers consolidating the development of creep research since 1990 and discussing the new horizons in this fundamental field of applied mechanics in the coming century. This volume is useful for researchers and graduate course students in the relevant fields.