Download or read book Fatigue Life Prediction Under Thermal Mechanical Loading in a Nickel Base Superalloy written by H. Bernard and published by . This book was released on 1993 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal-mechanical fatigue of IN-100, a cast nickel base superalloy, was previously shown to involve mainly early crack growth using either bare or aluminized specimens. This crack growth was found to be controlled by interdendritic oxidation. A model for engineering life to crack initiation is thus proposed to describe this microcrack growth phase using local stresses in a microstructural volume element at the crack tip. The identification of damage equations involves fatigue crack growth data on compact tension (CT) specimens, interdendritic oxidation kinetics measurements and fatigue crack growth on CT specimens that have been embrittled by previous oxidation at high temperature. The application of this model to life prediction is shown for low cycle fatigue and thermal-mechanical fatigue specimens of bare and coated specimens as well as for thermal shock experiments.
Download or read book Thermomechanical Fatigue Behavior of Materials written by Huseyin Sehitoglu and published by ASTM International. This book was released on 1993 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue under Thermal and Mechanical Loading Mechanisms Mechanics and Modelling written by J. Bressers and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Symposium "Fatigue under Thermal and Mechanical Loading", held at Petten (The Netherlands) on May 22-24, 1995, was jointly organized by the Institute for Advanced Materials of The Joint Research Centre, E. C. , and by the Societe Fran~se de Metallurgie et de Materiaux. The fast heating and cooling cycles experienced by many high temperature components cause thermally induced stresses, which often operate in combination with mechanical loads. The resulting thermal / mechanical fatigue cycle leads to material degradation mechanisms and failure modes typical of service cycles. The growing awareness that the synergism between the combined thermal and mechanical loads can not be reproduced by means of isothermal tests, has resulted in an increasing interest in thermal and thermo-mechanical fatigue testing. This trend has been reinforced by the constant pull by industry for more performant, yet safer high temperature systems, pushing the materials to the limit of their properties. Dedicated ASTM meetings in particular have set the scene for this area of research. The proceedings of the symposium organized by D. A. Spera and D. F. Mowbray in 1975 provided a reference book on thermal fatigue which reflects the knowledge and experimental capabilities of the mid-seventies.
Download or read book Towards the Development of a Physics Based Thermo Mechanical Fatigue Life Prediction Model for a Single Crystalline Ni Base Superalloy written by Robert Amaro and published by . This book was released on 2014 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: A long term effort has been underway to develop a mechanism-based model for life prediction under thermo-mechanical fatigue (TMF) cycling. A model has been developed which is based upon the impingement of slip bands upon oxidized regions and subsequent initiation of a crack due to stress concentration. The concept of an effective cycle temperature, Teff, and the dynamic nature of the material are critical components of the model and result in the ability to produce very accurate life predictions. It has also been shown that the model is capable of addressing complexities such as imposed high cycle fatigue (HCF) while still producing excellent agreement with the experiment. However, given the fact that this material is used for jet engine turbine blades and that such blades have cooling holes which act as notches, the next step in the development of this model is to incorporate it into a notched environment. The principal features of the TMF model are reviewed and a strategy for full integration into notched fatigue life prediction is discussed. Recent experimental results are presented which are based upon simulating smooth bar conditions at the notch root and a first approach to numerical simulation (called Q fit) is presented. Suggestions for further research are discussed.
Download or read book Thermomechanical fatigue behavior of materials written by Michael J. Verrilli and published by ASTM International. This book was released on 1996 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermomechanical Fatigue Behavior of Materials written by Michael A. McGaw and published by ASTM International. This book was released on 2003 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: "ASTM Stock Number: STP1428. - "Fourth Symposium on Thermomechanical Fatigue Behavior of Materials, held in Dallas, Texas on November 7-8, 2001. The Symposium was sponsored by ASTM Committee E08 on Fatigue and Fracture and its Subcommittee E08.05 on Cyclic Deformation and Fat. - Includes bibliographical references and indexes. ASTM International; 2011.
Download or read book Introduction to Unified Mechanics Theory with Applications written by Cemal Basaran and published by Springer Nature. This book was released on 2021-02-02 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text describes the mathematical formulation and proof of the unified mechanics theory (UMT) which is based on the unification of Newton’s laws and the laws of thermodynamics. It also presents formulations and experimental verifications of the theory for thermal, mechanical, electrical, corrosion, chemical and fatigue loads, and it discusses why the original universal laws of motion proposed by Isaac Newton in 1687 are incomplete. The author provides concrete examples, such as how Newton’s second law, F = ma, gives the initial acceleration of a soccer ball kicked by a player, but does not tell us how and when the ball would come to a stop. Over the course of Introduction to Unified Mechanics Theory, Dr. Basaran illustrates that Newtonian mechanics does not account for the thermodynamic changes happening in a system over its usable lifetime. And in this context, this book explains how to design a system to perform its intended functions safely over its usable life time and predicts the expected lifetime of the system without using empirical models, a process currently done using Newtonian mechanics and empirical degradation/failure/fatigue models which are curve-fit to test data. Written as a textbook suitable for upper-level undergraduate mechanics courses, as well as first year graduate level courses, this book is the result of over 25 years of scientific activity with the contribution of dozens of scientists from around the world including USA, Russia, Ukraine, Belarus, Spain, China, India and U.K.
Download or read book Thermomechanical Fatigue Behaviour of Coated and Bare Nickel Based Superalloy Single Crystals written by E. Chataigner and published by . This book was released on 1996 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: The thermal-mechanical fatigue behaviour of chromium-aluminium coated [001] single crystals of AM1, a nickel-base superalloy for turbine blades, is studied using a "diamond" shape cycle from 600‡ to 1100‡C. Comparison with bare specimens does not show any significant difference in thermal-mechanical fatigue nor in isothermal low cycle fatigue at high temperature. Metallographic observations on fracture surfaces and longitudinal sections of specimens tested to fatigue life or to a definite fraction of expected life have shown that the major crack tends to initiate from casting micropores in the sub-surface area very early in bare and coated specimens, under low cycle fatigue or thermal-mechanical fatigue. But the interaction between oxidation and fatigue cracking seems to play a major role. A simple model proposed by Reuchet and Rémy has been identified for this single crystal superalloy. Its application to the life prediction under low cycle fatigue and thermal-mechanical fatigue for bare and coated single crystals with different orientations is shown.
Download or read book Thermo mechanical Fatigue Behavior of Materials written by Huseyin Sehitoglu and published by ASTM International. This book was released on 2000 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multiaxial Fatigue and Fracture written by E. Macha and published by Elsevier. This book was released on 1999-09-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 18 papers selected from 90 presented at the Fifth International Conference on Biaxial/Multiaxial Fatigue and Fracture held in Cracow, Poland 8-12 September 1997. The papers in this book deal with theoretical, computational and experimental aspects of the multiaxial fatigue and fracture of engineering materials and structures. The papers are divided into the following four categories: 1. Proportional cyclic loading 2. Non-proportional cyclic loading 3. Variable amplitude and random loading 4. Crack growthMost papers in this publication talk about the behaviour of constructional materials and elements of machines under non-proportional loading and under variable amplitude and random loading, which are more realistic load histories met in industrial practice. Variable amplitude loading under cyclic load with basic frequency and random loading under load with a continuous band of frequency is classified here. This book gives a review of the latest world success and directions of investigations on multiaxial fatigue and fracture. More and more often publications are results of the co-operation of researchers from different laboratories and countries. Seven out of eighteen papers included here were worked out by international authors teams. This is a symptom of the times, when science and investigations know no borders.
Download or read book Thermo Mechanical Fatigue Life Prediction Methods written by H. Sehitoglu and published by . This book was released on 1992 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synergistic effects of oxidation on high temperature isothermal and thermo-mechanical fatigue behavior are studied. Experiments were conducted under different strain-temperature variations and atmospheres to reveal the varying severities of oxide induced failure. Conditions conducive to intergranular creep damage under thermo-mechanical fatigue are identified, and the competing damage mechanisms are classified for steels, Ni-based superalloys, and Al alloys. Requirements and a solution procedure are outlined for a thermo-mechanical fatigue life prediction model which is then applied to 1070 steel, MarM-247 nickel-based superalloy, and A12xxx-T4 aluminum alloy.
Download or read book Cyclic Plasticity of Metals written by Hamid Jahed and published by Elsevier. This book was released on 2021-11-11 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cyclic Plasticity of Metals: Modeling Fundamentals and Applications provides an exhaustive overview of the fundamentals and applications of various cyclic plasticity models including forming and spring back, notch analysis, fatigue life prediction, and more. Covering metals with an array of different structures, such as hexagonal close packed (HCP), face centered cubic (FCC), and body centered cubic (BCC), the book starts with an introduction to experimental macroscopic and microscopic observations of cyclic plasticity and then segues into a discussion of the fundamentals of the different cyclic plasticity models, covering topics such as kinematics, stress and strain tensors, elasticity, plastic flow rule, and an array of other concepts. A review of the available models follows, and the book concludes with chapters covering finite element implementation and industrial applications of the various models. - Reviews constitutive cyclic plasticity models for various metals and alloys with different cell structures (cubic, hexagonal, and more), allowing for more accurate evaluation of a component's performance under loading - Provides real-world industrial context by demonstrating applications of cyclic plasticity models in the analysis of engineering components - Overview of latest models allows researchers to extend available models or develop new ones for analysis of an array of metals under more complex loading conditions
Download or read book High Temperature Fatigue written by R.P. Skelton and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: About 35 years ago, thermal fatigue was identified as an important phenomenon which limited the lifetime of high temperature plant. In the intervening years many investigations have been carried out, primarily to give guidance on likely endurance (especially in the presence of time dependent deformation) but latterly, with the introduction of sophisticated testing machines, to provide knowledge of the underlying mechanisms of failure. A previous edited book (Fatigue at High Temperature, Elsevier Applied Science Publishers, 1983) summarised the state-of-the-art of high temperature fatigue testing and examined the factors influencing life, such as stress state, environment and microstructural effects. It also considered, in some detail, cyclic crack growth as a more rigorous approach to life limitation. The aim of the present volume (which in style and format follows exactly the same lines as its predecessor) is once again to pursue the desire to translate detailed laboratory knowledge into engineering design and assessment. There is, for example, a need to consider the limitations of the laboratory specimen and its relationship with engineering features. Many design procedures still rely on a simple endurance approach based on failure of a smooth specimen, and this is taken to indicate crack initiation in the component. In this volume, therefore, crack propagation is covered only incidentally, emphasis being placed instead on basic cyclic stress strain properties, non-isothermal behaviour, metallography, failure criteria and the need for agreed testing procedures.
Download or read book Comprehensive Structural Integrity written by Ian Milne and published by Elsevier. This book was released on 2003-07-25 with total page 4647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this major reference work is to provide a first point of entry to the literature for the researchers in any field relating to structural integrity in the form of a definitive research/reference tool which links the various sub-disciplines that comprise the whole of structural integrity. Special emphasis will be given to the interaction between mechanics and materials and structural integrity applications. Because of the interdisciplinary and applied nature of the work, it will be of interest to mechanical engineers and materials scientists from both academic and industrial backgrounds including bioengineering, interface engineering and nanotechnology. The scope of this work encompasses, but is not restricted to: fracture mechanics, fatigue, creep, materials, dynamics, environmental degradation, numerical methods, failure mechanisms and damage mechanics, interfacial fracture and nano-technology, structural analysis, surface behaviour and heart valves. The structures under consideration include: pressure vessels and piping, off-shore structures, gas installations and pipelines, chemical plants, aircraft, railways, bridges, plates and shells, electronic circuits, interfaces, nanotechnology, artificial organs, biomaterial prostheses, cast structures, mining... and more. Case studies will form an integral part of the work.
Download or read book THERMEC 97 written by Tetsuo Sakai and published by . This book was released on 1997 with total page 1274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Technical Memorandum written by and published by . This book was released on 1990 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engine Structures written by and published by . This book was released on 1988 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
