Download or read book Fatigue in Ferroelectric Ceramics and Related Issues written by Doru Constantin Lupascu and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: A major barrier to the introduction of ferroelectric devices into mass markets remains their limited reliability due to fatigue. The underlying physical and chemical mechanisms of this material fatigue phenomenon are extremely complex, and the relevant influences range from single-point defects to macroscopic boundary conditions. This book summarizes the different aspects of fatigue in ferroelectrics. It is primarily concerned with bulk material effects. Mechanical, electrical, and physico-chemical processes are described; reference data are given for different loading regimes and boundary conditions; and various fatigue models are compared. The monograph also demonstrates how the results of acoustic emission and of microscopy studies reveal the microscopic origins of fatigue in ferroelectric devices.
Download or read book Fatigue in Ferroelectric Ceramics and Related Issues written by D. C. Lupascu and published by . This book was released on 2014-09-01 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Simulation on Fatigue Behavior of Ferroelectric Ceramics written by Yongqiang Wang and published by . This book was released on 1997 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue Crack Growth in Ferroelectric Ceramics Under Cycle Electric Field written by Li Chen Collier and published by . This book was released on 1994 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gallium Nitride Electronics written by Rüdiger Quay and published by Springer Science & Business Media. This book was released on 2008-04-05 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on nearly a decade of materials and electronics research at the leading research institution on the nitride topic in Europe. It is a comprehensive monograph and tutorial that will be of interest to graduate students of electrical engineering, communication engineering, and physics; to materials, device, and circuit engineers in research and industry; to all scientists with a general interest in advanced electronics.
Download or read book Piezoelectricity written by Walter Heywang and published by Springer Science & Business Media. This book was released on 2008-11-14 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discovered in 1880, piezoelectric materials play a key role in an innovative market of several billions of dollars. Recent advances in applications derive from new materials and their development, as well as to new market requirements. With the exception of quartz, ferroelectric materials are used for they offer both high efficiency and sufficient versatility to meet adequately the multidimensional requirements for application. Consequently, strong emphasis is placed on tailoring materials and technology, whether one deals with single crystals, ceramics or plastic materials. Tailoring requires a basic understanding of both physical principles and technical possibilities and limitations. This report elucidates these developments by a broad spectrum of examples, comprising ultrasound in medicine and defence industry, frequency control, signal processing by SAW-devices, sensors, actuators, including novel valves for modern motor management. It delivers a mutual fertilization of technology push and market pull that should be of interest not only to materials scientists or engineers but also to managers who dedicate themselves to a sound future-oriented R&D policy.
Download or read book Nanocrystals written by C.N.R. Rao and published by Springer Science & Business Media. This book was released on 2007-04-03 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the most comprehensive book on nanocrystals on the market. It is an up-to-date monograph on an important aspect of nanoscience and technology. It opens with an elegant introduction including a brief historical account. Emphasis is then given to diverse synthetic methods, both chemical and physical, in addition to modern hybrid methods. Tables providing information at a glance, cartoons and schematic diagrams, make the monograph appealing to read.
Download or read book Organic Semiconductors in Sensor Applications written by Daniel A. Bernards and published by Springer Science & Business Media. This book was released on 2008-02-22 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic semiconductors offer unique characteristics which have prompted the application of organic semiconductors and their devices in physical, chemical, and biological sensors. This book covers this emerging field by discussing both optically- and electrically-based sensor concepts. Novel transducers based on organic light-emitting diodes and organic thin-film transistors, as well as systems-on-a-chip architectures are presented. Functionalization techniques are also outlined.
Download or read book Evolution of Thin Film Morphology written by Matthew Pelliccione and published by Springer Science & Business Media. This book was released on 2008-01-29 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of this book is on modeling and simulations used in research on the morphological evolution during film growth. The authors emphasize the detailed mathematical formulation of the problem. The book will enable readers themselves to set up a computational program to investigate specific topics of interest in thin film deposition. It will benefit those working in any discipline that requires an understanding of thin film growth processes.
Download or read book Into The Nano Era written by Howard Huff and published by Springer Science & Business Media. This book was released on 2008-09-14 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Even as we tentatively enter the nanotechnology era, we are now encountering the 50th anniversary of the invention of the IC. Will silicon continue to be the pre-eminent material and will Moore’s Law continue unabated, albeit in a broader economic venue, in the nanotechnology era? This monograph addresses these issues by a re-examination of the scientific and technological foundations of the micro-electronics era. It also features two visionary articles of Nobel laureates.
Download or read book Crystallography and the World of Symmetry written by Sanat K. Chatterjee and published by Springer Science & Business Media. This book was released on 2008-09-19 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Symmetry exists in realms from crystals to patterns, in external shapes of living or non-living objects, as well as in the fundamental particles and the physical laws that govern them. In fact, the search for this symmetry is the driving force for the discovery of many fundamental particles and the formulation of many physical laws. While one can not imagine a world which is absolutely symmetrical nor can one a world which is absolutely asymmetrical. These two aspects of nature are intermingled with each other inseparably. This is the basis of the existence of aperiodicity manifested in the liquid crystals and also quasi-crystals also discussed in “Crystallography and the World of Symmetry”.
Download or read book The Physics of Organic Superconductors and Conductors written by Andrei Lebed and published by Springer Science & Business Media. This book was released on 2008-03-26 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: This bang up-to-date volume contains the distilled wisdom of some of the world’s leading minds on the subject. Inside, there is a treasure trove of general (tutorial) and topical reviews, written by leading researchers in the area of organic superconductors and conductors. The papers hail from all over the world, as far afield as the USA and Australia. They cover contemporary topics such as unconventional superconductivity, non-Fermi-liquid properties, and the quantum Hall effect.
Download or read book Reactive Sputter Deposition written by Diederik Depla and published by Springer Science & Business Media. This book was released on 2008-06-24 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this valuable work, all aspects of the reactive magnetron sputtering process, from the discharge up to the resulting thin film growth, are described in detail, allowing the reader to understand the complete process. Hence, this book gives necessary information for those who want to start with reactive magnetron sputtering, understand and investigate the technique, control their sputtering process and tune their existing process, obtaining the desired thin films.
Download or read book Hartree Fock Slater Method for Materials Science written by Hirohiko Adachi and published by Springer Science & Business Media. This book was released on 2006-03-08 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molecular-orbital calculations for materials design such as alloys, ceramics, and coordination compounds are now possible for experimentalists. Molecuar-orbital calculations for the interpretation of chemical effect of spectra are also possible for experimentalists. The most suitable molecular-orbital calculation method for these purpose is the DV-Xa method, which is robust in such a way that the calculation converges to a result even if the structure of the molecule or solid is impossible in the pressure and temperature ranges on earth. This book specially addresses the methods to design novel materials and to predict the spectralline shape of unknown materials using the DV-Xa molecular-orbital method, but is also useful for those who want to calculate electronic structures of materials using any kind of method.
Download or read book Morphology Control of Materials and Nanoparticles written by Yoshio Waseda and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first major compilation of new advances covering the current status and topics related to the processing and production of precisely controlled materials. It provides a unique source of information and guidance for specialists and non-specialists alike. This book represents an extended introductory treatise on the fundamental aspects, new methods for the precise control of morphology (size, shape, composition, structure etc.) and accurate materials characterization, from both the basic science and the applied engineering viewpoints.
Download or read book Internal Friction in Metallic Materials written by Mikhail S. Blanter and published by Springer Science & Business Media. This book was released on 2007-05-17 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a unique collection of experimental data in the field of internal friction, anelastic relaxation, and damping properties of metallic materials. It reviews virtually all anelastic relaxation phenomena ever published. The reader is also supplied with explanations of the basic physical mechanisms of internal friction, a summary of typical effects for different groups of metals, and more than 2000 references to original papers.
Download or read book Lifetime Spectroscopy written by Stefan Rein and published by Springer Science & Business Media. This book was released on 2005-06-23 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lifetime spectroscopy is one of the most sensitive diagnostic tools for the identification and analysis of impurities in semiconductors. Since it is based on the recombination process, it provides insight into precisely those defects that are relevant to semiconductor devices such as solar cells. This book introduces a transparent modeling procedure that allows a detailed theoretical evaluation of the spectroscopic potential of the different lifetime spectroscopic techniques. The various theoretical predictions are verified experimentally with the context of a comprehensive study on different metal impurities. The quality and consistency of the spectroscopic results, as explained here, confirms the excellent performance of lifetime spectroscopy.
