Download or read book Fatigue Data Handbook written by A. Buch and published by Trans Tech Publications Ltd. This book was released on 1998-03-17 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative handbook presents an extensive compilation of data covering all important fatigue situations - fatigue strength of steels and other materials, notch- , size-, and mean stress effects, influence of temperature and corrosion, influence of special surface treatments, fatigue of structural elements and welds, aircraft fatigue, multilevel loading test programs, fatigue performance prediction etc.As is well known, fatigue investigations are often extremely time-consuming. The results of the tests depend upon numerous factors, and therefore handbook data must include all of the parameters which affect reported test results. The calculation of fatigue life and strength cannot be performed without having appropriate information concerning the specific fatigue situation. Nor can test programs be properly prepared without knowing the service conditions and the results of previous tests as, otherwise, the results obtained cannot be generalized. Information on component fatigue behaviour is of importance not only to machine designers but also to production engineers in charge of component manufacture, since processing strongly affects fatigue strength, and to maintenance engineers in charge of the operation and repair of cyclically loaded machine elements.

Download or read book Fatigue Data Book written by ASM International and published by ASM International. This book was released on 1994-12-31 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Properties of Aluminum Alloys written by John Gilbert Kaufman and published by ASM International. This book was released on 2008-01-01 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of data collected and maintained for many years as the property of a large aluminum company, which decided in 1997 to make it available to other engineers and materials specialists. In tabular form, presents data on the tensile and creep properties of eight species of wrought alloys and five species of cast alloys in the various shapes used in applications. Then looks at the fatigue data for several alloys under a range of conditions and loads. The data represent the typical or average findings, and though some were developed years ago, the collection is the largest and most detailed available. There is no index.

Download or read book Metal Fatigue Analysis Handbook written by Yung-Li Lee and published by Elsevier. This book was released on 2011-08-17 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understand why fatigue happens and how to model, simulate, design and test for it with this practical, industry-focused reference Written to bridge the technology gap between academia and industry, the Metal Fatigue Analysis Handbook presents state-of-the-art fatigue theories and technologies alongside more commonly used practices, with working examples included to provide an informative, practical, complete toolkit of fatigue analysis. Prepared by an expert team with extensive industrial, research and professorial experience, the book will help you to understand: Critical factors that cause and affect fatigue in the materials and structures relating to your work Load and stress analysis in addition to fatigue damage-the latter being the sole focus of many books on the topic How to design with fatigue in mind to meet durability requirements How to model, simulate and test with different materials in different fatigue scenarios The importance and limitations of different models for cost effective and efficient testing Whilst the book focuses on theories commonly used in the automotive industry, it is also an ideal resource for engineers and analysts in other disciplines such as aerospace engineering, civil engineering, offshore engineering, and industrial engineering. The only book on the market to address state-of-the-art technologies in load, stress and fatigue damage analyses and their application to engineering design for durability Intended to bridge the technology gap between academia and industry - written by an expert team with extensive industrial, research and professorial experience in fatigue analysis and testing An advanced mechanical engineering design handbook focused on the needs of professional engineers within automotive, aerospace and related industrial disciplines

Download or read book Atlas of Fatigue Curves written by Howard E. Boyer and published by ASM International. This book was released on 1985-12-31 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains more than 500 fatigue curves for industrial ferrous and nonferrous alloys. Also includes an explanation of fatigue testing and interpretation of test results. Each curve is presented independently and includes an explanation of its particular importance.

Download or read book Fatigue and Fracture written by F. C. Campbell and published by ASM International. This book was released on 2012-01-01 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book emphasizes the physical and practical aspects of fatigue and fracture. It covers mechanical properties of materials, differences between ductile and brittle fractures, fracture mechanics, the basics of fatigue, structural joints, high temperature failures, wear, environmentally-induced failures, and steps in the failure analysis process."--publishers website.

Download or read book SAE Fatigue Design Handbook written by Society of Automotive Engineers. Fatigue Design and Evaluation Committee and published by SAE International. This book was released on 1997 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers, in a single source, current technologies and procedures on all of the major elements of fatigue design. Intended as a handbook for industrial use, this book describes the major elements of the fatigue design process and how those elements must be tied together in a comprehensive product evaluation. Using this handbook will save the design engineer time, while ensuring understanding of the important elements of the fatigue design process.

Download or read book Properties of Aluminum Alloys written by John Gilbert Kaufman and published by ASM International. This book was released on 1999-01-01 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of data collected and maintained for many years as the property of a large aluminum company, which decided in 1997 to make it available to other engineers and materials specialists. In tabular form, presents data on the tensile and creep properties of eight species of wrought alloys and five species of cast alloys in the various shapes used in applications. Then looks at the fatigue data for several alloys under a range of conditions and loads. The data represent the typical or average findings, and though some were developed years ago, the collection is the largest and most detailed available. There is no index.

Download or read book Fatigue and Tribological Properties of Plastics and Elastomers written by Laurence W. McKeen and published by Butterworth-Heinemann. This book was released on 2009-11-17 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part of a series of core databooks within the William Andrew Plastics Design Library, Fatigue and Tribological Properties of Plastics and Elastomers provides a comprehensive collection of graphical multipoint data and tabular data covering fatigue and tribology.The concept of fatigue is very straightforward: if an object is subjected to a stress or deformation, and it is repeated, the object becomes weaker. This weakening of plastic material is called fatigue. Tribology is the science and technology of surfaces in contact with each other and therefore covers friction, lubrication and wear. The reduction of wear and fatigue and the improvement of lubrication are key bottom-line issues for engineers and scientists involved in the plastics industry and product design with plastics.Fatigue and Tribological Properties of Plastics and Elastomers, Second Edition is an update of all that has changed in the world of plastics since the 1st edition appeared nearly 15 years ago, and has been reorganized from a polymer chemistry point of view. - A hard-working reference tool: part of the daily workflow of engineers and scientists involved in the plastics industry and product design with plastics - The reduction of wear and fatigue and the improvement of lubrication are key bottom-line issues - The data in this book provide engineers with the tools they need to design for low failure rates

Download or read book Fatigue and Durability of Structural Materials written by Gary R. Halford and published by ASM International. This book was released on 2006 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue and Durability of Structural Materials explains how mechanical material behavior relates to the design of structural machine components. The major emphasis is on fatigue and failure behavior using engineering models that have been developed to predict, in advance of service, acceptable fatigue and other durability-related lifetimes. The book covers broad classes of materials used for high-performance structural applications such as aerospace components, automobiles, and power generation systems. Coverage focuses on metallic materials but also addresses unique capabilities of important nonmetals. The concepts are applied to behavior at room or ambient temperatures; a planned second volume will address behavior at higher-temperatures. The volume is a repository of the most significant contributions by the authors to the art and science of material and structural durability over the past half century. During their careers, including 40 years of direct collaboration, they have developed a host of durability models that are based on sound physical and engineering principles. Yet, the models and interpretation of behavior have a unique simplicity that is appreciated by the practicing engineer as well as the beginning student. In addition to their own pioneering work, the authors also present the work of numerous others who have provided useful results that have moved progress in these fields. This book will be of immense value to practicing mechanical and materials engineers and designers charged with producing structural components with adequate durability. The coverage is appropriate for a range of technical levels from undergraduate engineering students through material behavior researchers and model developers. It will be of interest to personnel in the automotive and off-highway vehicle manufacturing industry, the aeronautical industry, space propulsion and the power generation/conversion industry, the electric power industry, the machine tool industry, and any industry associated with the design and manufacturing of mechanical equipment subject to cyclic loads.

Download or read book Fatigue Design Handbook written by James A. Graham and published by SAE International. This book was released on 1968 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Statistical Analysis of Fatigue Data written by R. E. Little and published by ASTM International. This book was released on 1981 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is commonly assumed in analysing fatigue data that there is a definite functional relationship between life in number of cycles and stress level. However, as has been pointed out several times (1, 2), an examination of the data shows considerable scatter. Even with carefully prepared smooth specimens, all from the same heat of steel, treated in the same manner and tested in the same laboratory, a range of 2 to 1 in number of cycles for failure at the same stress level is normal (1) and a range of 10 to 1 is not unusual (2). If the specimens are tested by different laboratories, slightly varying techniques will introduce further scatter (3).

Download or read book Metal Fatigue Analysis Handbook written by Yung-Li Lee and published by Elsevier. This book was released on 2011-10-06 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understand why fatigue happens and how to model, simulate, design and test for it with this practical, industry-focused reference Written to bridge the technology gap between academia and industry, the Metal Fatigue Analysis Handbook presents state-of-the-art fatigue theories and technologies alongside more commonly used practices, with working examples included to provide an informative, practical, complete toolkit of fatigue analysis. Prepared by an expert team with extensive industrial, research and professorial experience, the book will help you to understand: - Critical factors that cause and affect fatigue in the materials and structures relating to your work - Load and stress analysis in addition to fatigue damage—the latter being the sole focus of many books on the topic - How to design with fatigue in mind to meet durability requirements - How to model, simulate and test with different materials in different fatigue scenarios - The importance and limitations of different models for cost effective and efficient testing Whilst the book focuses on theories commonly used in the automotive industry, it is also an ideal resource for engineers and analysts in other disciplines such as aerospace engineering, civil engineering, offshore engineering, and industrial engineering. - The only book on the market to address state-of-the-art technologies in load, stress and fatigue damage analyses and their application to engineering design for durability - Intended to bridge the technology gap between academia and industry - written by an expert team with extensive industrial, research and professorial experience in fatigue analysis and testing - An advanced mechanical engineering design handbook focused on the needs of professional engineers within automotive, aerospace and related industrial disciplines

Download or read book Fatigue in Composites written by Bryan Harris and published by Woodhead Publishing. This book was released on 2003-10-31 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: A survey of work on the fatigue behavior of composites dealing with the problems met with by materials scientists and designers in aerospace, automotive, marine, and structural engineering. Including a historical review, standards, micromechanical aspects, life-prediction methods for constant stress and variable stress, and fatigue in practical situations.

Download or read book Multiaxial Fatigue written by Darrell Socie and published by SAE International. This book was released on 1999-12-15 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides practicing engineers, researchers, and students with a working knowledge of the fatigue design process and models under multiaxial states of stress and strain. Readers are introduced to the important considerations of multiaxial fatigue that differentiate it from uniaxial fatigue.

Download or read book Fundamentals of Metal Fatigue Analysis written by Julie A. Bannantine and published by Pearson. This book was released on 1990 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to present current methods and techniques of fatigue analysis, with a focus on developing basic skills for selecting appropriate analytical techniques. Contains numerous worked examples, chapter summaries, and problems. (vs. Fuchs/Stevens).

Download or read book Fatigue of Materials written by Subra Suresh and published by Cambridge University Press. This book was released on 1998-10-29 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a leading researcher in the field, this revised and updated second edition of a highly successful book provides an authoritative, comprehensive and unified treatment of the mechanics and micromechanisms of fatigue in metals, non-metals and composites. The author discusses the principles of cyclic deformation, crack initiation and crack growth by fatigue, covering both microscopic and continuum aspects. The book begins with discussions of cyclic deformation and fatigue crack initiation in monocrystalline and polycrystalline ductile alloys as well as in brittle and semi-/non-crystalline solids. Total life and damage-tolerant approaches are then introduced in metals, non-metals and composites followed by more advanced topics. The book includes an extensive bibliography and a problem set for each chapter, together with worked-out example problems and case studies. This will be an important reference for anyone studying fracture and fatigue in materials science and engineering, mechanical, civil, nuclear and aerospace engineering, and biomechanics.