Download or read book Composite Materials written by Glenn C. Grimes and published by ASTM International. This book was released on 1992 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation In papers presented at the Tenth ASTM Conference on Composite Materials, held in San Francisco, April 1990, important composite materials technical issues are discussed in eight sections: compression test methodology analysis and development; general test methodology analysis and development; material mechanical properties and failure criteria; advanced materials analysis and test; analysis, test, and certification of structure; quality assurance and process control; interlaminar fracture analysis and test; and damage, flows, and repair. Member price, $95. Annotation copyrighted by Book News, Inc., Portland, OR.

Download or read book Fatigue under Thermal and Mechanical Loading Mechanisms Mechanics and Modelling written by J. Bressers and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Symposium "Fatigue under Thermal and Mechanical Loading", held at Petten (The Netherlands) on May 22-24, 1995, was jointly organized by the Institute for Advanced Materials of The Joint Research Centre, E. C. , and by the Societe Fran~se de Metallurgie et de Materiaux. The fast heating and cooling cycles experienced by many high temperature components cause thermally induced stresses, which often operate in combination with mechanical loads. The resulting thermal / mechanical fatigue cycle leads to material degradation mechanisms and failure modes typical of service cycles. The growing awareness that the synergism between the combined thermal and mechanical loads can not be reproduced by means of isothermal tests, has resulted in an increasing interest in thermal and thermo-mechanical fatigue testing. This trend has been reinforced by the constant pull by industry for more performant, yet safer high temperature systems, pushing the materials to the limit of their properties. Dedicated ASTM meetings in particular have set the scene for this area of research. The proceedings of the symposium organized by D. A. Spera and D. F. Mowbray in 1975 provided a reference book on thermal fatigue which reflects the knowledge and experimental capabilities of the mid-seventies.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.

Download or read book Fatigue Damage Accumulation in Various Metal Matrix Composites written by and published by . This book was released on 1987 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fatigue of Composite Materials written by K.L. Reifsnider and published by Elsevier. This book was released on 2012-12-02 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the first comprehensive review of its kind on the long-term behaviour of composite materials and structures subjected to time variable mechanical, thermal, and chemical influences, a subject of critical importance to the design, development, and certification of high performance engineering structures. Specific topics examined include damage, damage characterization, and damage mechanics; fatigue testing and evaluation; fatigue behaviour of short and long fibre reinforced polymer and metal matrix materials; viscoelastic and moisture effects; delamination; statistical considerations; the modeling of cumulative damage development; and life prediction. The volume provides an extensive presentation of data, discussions, and comparisons on the behaviour of the major types of material systems in current use, as well as extensive analysis and modeling (including the first presentation of work not found elsewhere). The book will be of special interest to engineers concerned with reliability, maintainability, safety, certification, and damage tolerance; to materials developers concerned with making materials for long-term service, especially under severe loads and environments, and to lecturers, students, and researchers involved in material system design, performance, solid mechanics, fatigue, durability, and composite materials. The scope of the work extends from entry level material to the frontiers of the subject.

Download or read book Fatigue Testing and Damage Development in Continuous Fiber Reinforced Metal Matrix Composites written by W. S. Johnson and published by . This book was released on 1988 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metal Matrix Composites written by W. Steven Johnson and published by ASTM International. This book was released on 1989 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fourteen peer-reviewed papers on testing techniques, analysis approaches, and descriptions of various failure processes. From the Symposium on [title] held at Sparks, NV, April 1988. Annotation copyright Book News, Inc. Portland, Or.

Download or read book Fatigue of Materials at Very High Numbers of Loading Cycles written by Hans-Jürgen Christ and published by Springer Spektrum. This book was released on 2018-12-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents the final reports of the scientific projects funded within the DFG-SPP1466 and, hence, provides the reader with the possibility to familiarize with the leading edge of VHCF research. It draws a balance on the existing knowledge and its enhancement by the joint research action of the priority program. Three different material classes are dealt with: structural metallic materials, long-fiber-reinforced polymers and materials used in micro-electro-mechanical systems. The project topics address the development of suitable experimental techniques for high-frequency testing and damage monitoring, the characterization of damage mechanisms and damage evolution, the development of mechanism-based models and the transfer of the obtained knowledge and understanding into engineering regulations and applications.

Download or read book An Introduction to Metal Matrix Composites written by T. W. Clyne and published by Cambridge University Press. This book was released on 1993 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal matrix composites constitute a new class of materials, now starting to make a major industrial impact in fields as diverse as aerospace, automotives and electronics. This book gives a comprehensive, integrated coverage of these materials, including the background to analytical-, experimental-, production and application-oriented aspects. Clear pictorial descriptions are given of the basic principles governing various properties and characteristics; these encompass mechanical, thermal, electrical, environmental and wear behaviour. Coverage also extends to material processing and component fabrication aspects and to a survey of commercial usage. This book is aimed primarily at scientists, engineers, production managers and all those involved in research on new materials in general, and metal matrix composites in particular, but may also be suitable for use as a text in beginning graduate and advanced undergraduate courses.

Download or read book Applications of Continuum Damage Mechanics to Fatigue and Fracture written by David L. McDowell and published by ASTM International. This book was released on 1997 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains papers from the May 1996 Symposium on Applications of Continuum Damage Mechanics (CDM) to Fatigue and Fracture. Papers in Section I deal with various aspects of modeling damage in composite materials, such as high temperature environmental degradation, fatigue, and viscous damage in metal a

Download or read book Long term Behavior of Composites written by T. Kevin O'Brien and published by ASTM International. This book was released on 1983 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Damping in Fiber Reinforced Composite Materials written by Pramod Kumar and published by Woodhead Publishing. This book was released on 2023-01-13 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: Damping in Fiber Reinforced Composite Materials starts with an introduction to the basic concepts of damping in composite materials. Methods of modeling damping are then covered, along with recent developments in measuring techniques, both local, like polar scanning and global techniques like the Resonalyser method (based on measuring modal damping ratios of composite material plates). The effect of other factors, such as stress, strain-level, stiffness and frequency that need to be considered when determining damping behavior in composite materials are also discussed in detail. Other chapters present a parametric study of a two-phase composite material using different micromechanical models such as Unified micromechanics, and Hashin and Eshelby's to predict elastic moduli and loss factors. A bridging model that incorporates the effect of fiber packaging factors is then compared to FEM results. Final sections cover the effect of the interphase on the mechanical properties of the composite, present a nonlinear model for the prediction of damping in viscoelastic materials, and provide practical examples of damping and principles of vibration control. - Introduces the basics of damping and dynamic analysis in composite materials - Explains damping mechanisms in fiber reinforced composites and modeling principles - Covers recent developments in measuring techniques for the identification of damping in composite materials - Explains the use of a dynamic mechanical analyzer for predicting damping in composite materials - Contains micromechanical studies, modeling of two and three-phase composites, and modeling of non-linear damping - Includes experimental results that validate micromechanical models

Download or read book Mechanisms of Fatigue Damage in Boron aluminum Composites written by and published by . This book was released on 1980 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Micromechanics of Composite Materials written by Jacob Aboudi and published by Butterworth-Heinemann. This book was released on 2013 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summary: A Generalized Multiscale Analysis Approach brings together comprehensive background information on the multiscale nature of the composite, constituent material behaviour, damage models and key techniques for multiscale modelling, as well as presenting the findings and methods, developed over a lifetime's research, of three leading experts in the field. The unified approach presented in the book for conducting multiscale analysis and design of conventional and smart composite materials is also applicable for structures with complete linear and nonlinear material behavior, with numerous applications provided to illustrate use. Modeling composite behaviour is a key challenge in research and industry; when done efficiently and reliably it can save money, decrease time to market with new innovations and prevent component failure.

Download or read book Advances in Fracture Research written by K. Salama and published by Elsevier. This book was released on 2013-10-22 with total page 3063 pages. Available in PDF, EPUB and Kindle. Book excerpt: Held every four years, the International Congress on Fracture is the premier international forum for the exchange of ideas between scientists and engineers involved in producing and using materials resistant to fracture and fatigue. This major six-volume work which forms the proceedings of the Seventh International Congress on Fracture therefore provides the most comprehensive account available of the current status of research into fracture and fatigue, and the application of this knowledge to the design, fabrication and operation of materials and structures. As such, it will be an essential reference for materials scientists and mechanical, structural, aeronautical and design engineers with an interest in fracture and its prevention.

Download or read book Defects and Damage in Composite Materials and Structures written by Rikard Benton Heslehurst and published by CRC Press. This book was released on 2014-04-21 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advantages of composite materials include a high specific strength and stiffness, formability, and a comparative resistance to fatigue cracking and corrosion. However, not forsaking these advantages, composite materials are prone to a wide range of defects and damage that can significantly reduce the residual strength and stiffness of a structure or result in unfavorable load paths. Emphasizing defect identification and restitution, Defects and Damage in Composite Materials and Structures explains how defects and damage in composite materials and structures impact composite component performance. Providing ready access to an extensive, descriptive list of defects and damage types, this must-have reference: Examines defect criticality in composite structures Recommends repair actions to restore structural integrity Discusses failure modes and mechanisms of composites due to defects Reviews NDI processes for finding and identifying defects in composite materials Relating defect detection methods to defect type, the author merges his experience in the field of in-service activities for composite airframe maintenance and repair with indispensable reports and articles on defects and damage in advanced composite materials from the last 50 years.

Download or read book The Handbook of Advanced Materials written by and published by John Wiley & Sons. This book was released on 2004-07-01 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written to educate readers about recent advances in the area of new materials used in making products. Materials and their properties usually limit the component designer. * Presents information about all of these advanced materials that enable products to be designed in a new way * Provides a cost effective way for the design engineer to become acquainted with new materials * The material expert benefits by being aware of the latest development in all these areas so he/she can focus on further improvements