Download or read book Fatigue Damage Accumulation Due to Complex Random Vibration Environments written by Mark Edward Paulus and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue Damage written by Christi Lalanne and published by CRC Press. This book was released on 2002-03-29 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: About the Series: This important new series of five volumes has been written with both the professional engineers and the academic in mind. Christian Lalanne explores every aspect of vibration and shock, two fundamental and crucially important areas of mechanical engineering, from both the theoretical and practical standpoints. As all products need to be designed to withstand the environmental conditions to which they are likely to be subjected, prototypes must be verified by calculation and laboratory tests, the latter according to specifications from national or international standards. The concept of tailoring the product to its environment has gradually developed whereby, from the very start of a design project, through the to the standards specifications and testing procedures on th e prototype, the real environment in which the product being tested will be functioning is taken into account. The five volumes of Mechanical Shock and Vibration cover all the issues that need to be addressed in this area of mechanical engineering. The theoretical analyses are placed in the context of the real world and of laboratory tests - essential for the development of specifications. Volume IV: Fatigue Damage Fatigue damage in a system with one degree of freedom is one of the two criteria applied when comparing the severity of vibratory environments. The same criterion is also employed for a specifciation representing the effects produced by the set of vibrations imposed in a real environment. In this volume, which is devoted to the calculation of fatigue damage, the author explores the hypotheses adopted to describe the behavior of material suffering fatigue and the laws of fatigue accumulation. He also considers the methods of counting the response peaks, which are used to establish the histogram when it is impossible to use the probability density of the peaks obtained with a Gaussian signal. The expressions for mean damage and its standard deviation are established and other hypotheses are tested.
Download or read book Mechanical Vibration and Shock Analysis Fatigue Damage written by Christian Lalanne and published by John Wiley & Sons. This book was released on 2014-04-16 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue damage in a system with one degree of freedom is one of the two criteria applied when comparing the severity of vibratory environments. The same criterion is also used for a specification representing the effects produced by the set of vibrations imposed in a real environment. In this volume, which is devoted to the calculation of fatigue damage, Christian Lalanne explores the hypotheses adopted to describe the behavior of material affected by fatigue and the laws of fatigue accumulation. The author also considers the methods for counting response peaks, which are used to establish the histogram when it is not possible to use the probability density of the peaks obtained with a Gaussian signal. The expressions for mean damage and its standard deviation are established and other hypotheses are tested.
Download or read book Mechanical Vibration and Shock Analysis Fatigue Damage written by Christian Lalanne and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Vibration and Shock Analysis, Second Edition Volume 4: Fatigue Damage Fatigue damage in a system with one degree of freedom is one of the two criteria applied when comparing the severity of vibratory environments. The same criterion is also employed for a specification representing the effects produced by the set of vibrations imposed in a real-world environment. In this volume, which is devoted to the calculation of fatigue damage, the author explores the various hypotheses and models used to describe the behavior of material suffering fatigue and the laws of fatigue accumulation. He also considers the methods of counting response peaks, which are used to establish a histogram when it is impossible to use the probability density of the peaks obtained with a Gaussian signal. The expressions for mean damage and its standard deviation are established and other hypotheses are tested. The Mechanical Vibration and Shock Analysis five-volume series has been written with both the professional engineer and the academic in mind. Christian Lalanne explores every aspect of vibration and shock, two fundamental and extremely significant areas of mechanical engineering, from both a theoretical and practical point of view. The five volumes cover all the necessary issues in this area of mechanical engineering. The theoretical analyses are placed in the context of both the real world and the laboratory, which is essential for the development of specifications.
Download or read book Non Gaussian Random Vibration Fatigue Analysis and Accelerated Test written by Yu Jiang and published by Springer Nature. This book was released on 2021-09-15 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the theory, method and application of non-Gaussian random vibration fatigue analysis and test. The main contents include statistical analysis method of non-Gaussian random vibration, modeling and simulation of non-Gaussian/non-stationary random vibration, response analysis under non-Gaussian base excitation, non-Gaussian random vibration fatigue life analysis, fatigue reliability evaluation of structural components under Gaussian/non-Gaussian random loadings, non-Gaussian random vibration accelerated test method and application cases. From this book, the readers can not only learn how to reproduce the non-Gaussian vibration environment actually experienced by the product, but also know how to evaluate the fatigue life and reliability of the structure under non-Gaussian random excitation.
Download or read book Introduction to continuum damage mechanics written by L. Kachanov and published by Springer Science & Business Media. This book was released on 1986-05-31 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern engineering materials subjected to unfavorable mechanical and environmental conditions decrease in strength due to the accumulation of microstructural changes. For example, considering damage in metals we can mention creep damage, ductile plastic damage, embrittlement of steels and fatigue damage. To properly estimate the value of damage when designing reliable structures it is necessary to formulate the damage phenomenon in terms of mechanics. Then it is possible to analyse various engineering problems using analytical and computational techniques. During the last two decades the basic principles of continuum damage mechanics were formulated and some special problems were solved. Many scientific papers were published and several conferences on damage mechanics took place. Now continuum damage mechanics is rapidly developing branch of fracture mechanics. This book is probably the first one on the subject; it contains a sys tematic description of the basic aspects of damage mechanics and some of its applications. In general, a theoretical description of damage can be rather compli cated. The experiments in this field are difficult (especially under multiax ial stress and non-proportional loading). Therefore, experimental data, as a rule, are scarce. Determination of functions and constants, which play a role in the complex variants of the theory, from available experimental data is often practically impossible. ix L.M. Kachanov The problems of damage mechanics are mainly engineering ones. Therefore, the author tries to avoid superfluous mathematical formalism. Some more details of the book's subject can be found in the list of con tents.
Download or read book Vibration Fatigue by Spectral Methods written by Janko Slavič and published by Elsevier. This book was released on 2020-08-20 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration Fatigue by Spectral Methods relates the structural dynamics theory to the high-cycle vibration fatigue. The book begins with structural dynamics theory and relates the uniaxial and multiaxial vibration fatigue to the underlying structural dynamics and signal processing theory. Organized in two parts, part I gives the theoretical background and part II the selected experimental research. The time- and frequency- domain aspects of signal processing in general, related to structural dynamics and counting methods are covered in detail. It also covers all the underlying theory in structural dynamics, signal processing, uniaxial & multiaxial fatigue; including non-Gaussianity and non-stationarity. Finally, it provides the latest research on multiaxial vibration fatigue and the non-stationarity and non-Gaussianity effects. This book is for engineers, graduate students, researchers and industry professionals working in the field of structural durability under random loading and vibrations and also those dealing with fatigue of materials and constructions. Introduces generalized structural dynamics theory of multiaxial vibration fatigue Maximizes understanding of structural dynamics theory in relation to frequency domain fatigue Illustrates connections between experimental work and theory with case studies, cross-referencing, and parallels to accelerated vibration testing
Download or read book The Inherent Variation in Fatigue Damage Resulting from Random Vibration written by William David Mark and published by . This book was released on 1961 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Vibration Shock Fatigue damage written by Christian Lalanne and published by . This book was released on 2002 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue Damage Due to Wide band Random Vibration written by John Warner Shipley and published by . This book was released on 1966 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Atlas of Fatigue Curves written by Howard E. Boyer and published by ASM International. This book was released on 1985-12-31 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains more than 500 fatigue curves for industrial ferrous and nonferrous alloys. Also includes an explanation of fatigue testing and interpretation of test results. Each curve is presented independently and includes an explanation of its particular importance.
Download or read book Mechanical Vibration and Shock Analysis Fatigue Damage written by Christian Lalanne and published by Wiley-ISTE. This book was released on 2009-07-27 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Vibration and Shock Analysis, Second Edition Volume 4: Fatigue Damage Fatigue damage in a system with one degree of freedom is one of the two criteria applied when comparing the severity of vibratory environments. The same criterion is also employed for a specification representing the effects produced by the set of vibrations imposed in a real-world environment. In this volume, which is devoted to the calculation of fatigue damage, the author explores the various hypotheses and models used to describe the behavior of material suffering fatigue and the laws of fatigue accumulation. He also considers the methods of counting response peaks, which are used to establish a histogram when it is impossible to use the probability density of the peaks obtained with a Gaussian signal. The expressions for mean damage and its standard deviation are established and other hypotheses are tested. The Mechanical Vibration and Shock Analysis five-volume series has been written with both the professional engineer and the academic in mind. Christian Lalanne explores every aspect of vibration and shock, two fundamental and extremely significant areas of mechanical engineering, from both a theoretical and practical point of view. The five volumes cover all the necessary issues in this area of mechanical engineering. The theoretical analyses are placed in the context of both the real world and the laboratory, which is essential for the development of specifications.
Download or read book Mechanical Vibration and Shock Analysis Sinusoidal Vibration written by Christian Lalanne and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Vibration and Shock Analysis, Second Edition Volume 1: Sinusoidal Vibration The relative and absolute response of a mechanical system with a single degree of freedom is considered for arbitrary excitation, and its transfer function defined in various forms. The characteristics of sinusoidal vibration are examined in the context both of the real world and of laboratory tests, and for both transient and steady state response of the single-degree-of-freedom system. Viscous damping and then nonlinear damping are considered. The various types of swept sine perturbations and their properties are described and, for the one-degree-of-freedom system, the consequence of an inappropriate choice of sweep rate are considered. From the latter, rules governing the choice of suitable sweep rates are developed. The Mechanical Vibration and Shock Analysis five-volume series has been written with both the professional engineer and the academic in mind. Christian Lalanne explores every aspect of vibration and shock, two fundamental and extremely significant areas of mechanical engineering, from both a theoretical and practical point of view. The five volumes cover all the necessary issues in this area of mechanical engineering. The theoretical analyses are placed in the context of both the real world and the laboratory, which is essential for the development of specifications.
Download or read book Mechanical Vibration and Shock Analysis Random Vibration written by Christian Lalanne and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Vibration and Shock Analysis, Second Edition Volume 3: Random Vibration The vast majority of vibrations encountered in a real-world environment are random in nature. Such vibrations are intrinsically complicated, but this volume describes a process enabling the simplification of the analysis required, and the analysis of the signal in the frequency domain. Power spectrum density is also defined, with the requisite precautions to be taken in its calculation described together with the processes (windowing, overlapping) necessary for improved results. A further complementary method, the analysis of statistical properties of the time signal, is described. This enables the distribution law of the maxima of a random Gaussian signal to be determined and simplifies calculation of fatigue damage to be made by the avoidance of the direct counting of peaks. The Mechanical Vibration and Shock Analysis five-volume series has been written with both the professional engineer and the academic in mind. Christian Lalanne explores every aspect of vibration and shock, two fundamental and extremely significant areas of mechanical engineering, from both a theoretical and practical point of view. The five volumes cover all the necessary issues in this area of mechanical engineering. The theoretical analyses are placed in the context of both the real world and the laboratory, which is essential for the development of specifications.
Download or read book Safety and Reliability of Complex Engineered Systems written by Luca Podofillini and published by CRC Press. This book was released on 2015-09-03 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety and Reliability of Complex Engineered Systems contains the Proceedings of the 25th European Safety and Reliability Conference, ESREL 2015, held 7-10 September 2015 in Zurich, Switzerland. It includes about 570 papers accepted for presentation at the conference. These contributions focus on theories and methods in the area of risk, safety and
Download or read book Random Fatigue written by K. Sobczyk and published by Academic Press. This book was released on 2012-12-02 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: For many years fatigue has been a significant and difficult problem for engineers, especially for those who design structures such as aircraft, bridges, pressure vessels, and cranes. Fatigue of engineering materials is commonly regarded as an important deterioration process and a principal mode of failure for various structural and mechanical systems. This book presents a unified approach to stochastic modeling of the fatigue phenomenon, particularly the fatigue crack growth process. The main approaches to construction of these stochastic models are presented to show their methodological consistency and potential usefulness in engineering practice. The analyses contained in this work should also inspire the development of new approaches for designing and performing fatigue experiments.
Download or read book Random Vibration and Spectral Analysis Vibrations al atoires et analyse spectral written by A. Preumont and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: I became interested in Random Vibration during the preparation of my PhD dissertation, which was concerned with the seismic response of nuclear reactor cores. I was initiated into this field through the cla.ssical books by Y.K.Lin, S.H.Crandall and a few others. After the completion of my PhD, in 1981, my supervisor M.Gera.din encouraged me to prepare a course in Random Vibration for fourth and fifth year students in Aeronautics, at the University of Liege. There was at the time very little material available in French on that subject. A first draft was produced during 1983 and 1984 and revised in 1986. These notes were published by the Presses Poly techniques et Universitaires Romandes (Lausanne, Suisse) in 1990. When Kluwer decided to publish an English translation ofthe book in 1992, I had to choose between letting Kluwer translate the French text in-extenso or doing it myself, which would allow me to carry out a sustantial revision of the book. I took the second option and decided to rewrite or delete some of the original text and include new material, based on my personal experience, or reflecting recent technical advances. Chapter 6, devoted to the response of multi degree offreedom structures, has been completely rewritten, and Chapter 11 on random fatigue is entirely new. The computer programs which have been developed in parallel with these chapters have been incorporated in the general purpose finite element software SAMCEF, developed at the University of Liege.
