Download or read book Fatigue Crack Growth in Riveted Joints written by Scott Anthony Fawaz and published by . This book was released on 1997 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fibre Metal Laminates written by Ad Vlot and published by Springer Science & Business Media. This book was released on 2001-09-30 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Like New, No Highlights,No Markup,all pages are intact.
Download or read book A Practical Engineering Approach to Predicting Fatigue Crack Growth in Riveted Lap Joints written by C. E. Harris and published by . This book was released on 2000 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: An extensive experimental database has been assembled from very detailed teardown examinations of fatigue cracks found in rivet holes of fuselage structural components. Based on this experimental database, a comprehensive analysis methodology was developed to predict the onset of widespread fatigue damage in lap joints of fuselage structure. Several computer codes were developed with specialized capabilities to conduct the various analyses that make up the comprehensive methodology. Over the past several years, the authors have interrogated various aspects of the analysis methods to determine the degree of computational rigor required to produce numerical predictions with acceptable engineering accuracy. This study led to the formulation of a practical engineering approach to predicting fatigue crack growth in riveted lap joints. This paper describes the practical engineering approach and compares predictions with the results from several experimental studies.
Download or read book Riveted Lap Joints in Aircraft Fuselage written by Andrzej Skorupa and published by Springer Science & Business Media. This book was released on 2012-06-23 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue of the pressurized fuselages of transport aircraft is a significant problem all builders and users of aircraft have to cope with for reasons associated with assuring a sufficient lifetime and safety, and formulating adequate inspection procedures. These aspects are all addressed in various formal protocols for creating and maintaining airworthiness, including damage tolerance considerations. In most transport aircraft, fatigue occurs in lap joints, sometimes leading to circumstances that threaten safety in critical ways. The problem of fatigue of lap joints has been considerably enlarged by the goal of extending aircraft lifetimes. Fatigue of riveted lap joints between aluminium alloy sheets, typical of the pressurized aircraft fuselage, is the major topic of the present book. The richly illustrated and well-structured chapters treat subjects such as: structural design solutions and loading conditions for fuselage skin joints; relevance of laboratory test results for simple lap joint specimens to riveted joints in a real structure; effect of various production and design related variables on the riveted joint fatigue behaviour; analytical and experimental results on load transmission in mechanically fastened lap joints; theoretical and experimental analysis of secondary bending and its implications for riveted joint fatigue performance; nucleation and shape development of fatigue cracks in riveted longitudinal lap joints; overview of experimental investigations into the multi-site damage for full scale fuselage panels and riveted lap joint specimens; fatigue crack growth and fatigue life prediction methodology for riveted lap joints; residual strength predictions for riveted lap joints in a fuselage structure. The major issues of each chapter are recapitulated in the last section.
Download or read book Small Fatigue Cracks written by K.S. Ravichandran and published by Elsevier. This book was released on 1999-09-30 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the fully peer-reviewed papers presented at the Third Engineering Foundation Conference on Small Fatigue Cracks, held under the chairmanship of K.S. Ravichandran and Y. Murakami during December 6-11, 1998, at the Turtle Bay Hilton, Oahu, Hawaii. This book presents a state-of-the-art description of the mechanics, mechanisms and applications of small fatigue cracks by most of the world's leading experts in this field. Topics ranging from the mechanisms of crack initiation, small crack behavior in metallic, intermetallic, ceramic and composite materials, experimental measurement, mechanistic and theoretical models, to the role of small cracks in fretting fatigue and the application of small crack results to the aging aircraft and high-cycle fatigue problems, are covered.
Download or read book Fatigue of Structures and Materials written by J. Schijve and published by Springer Science & Business Media. This book was released on 2008-12-16 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue of structures and materials covers a wide scope of different topics. The purpose of the present book is to explain these topics, to indicate how they can be analyzed, and how this can contribute to the designing of fatigue resistant structures and to prevent structural fatigue problems in service. Chapter 1 gives a general survey of the topic with brief comments on the signi?cance of the aspects involved. This serves as a kind of a program for the following chapters. The central issues in this book are predictions of fatigue properties and designing against fatigue. These objectives cannot be realized without a physical and mechanical understanding of all relevant conditions. In Chapter 2 the book starts with basic concepts of what happens in the material of a structure under cyclic loads. It illustrates the large number of variables which can affect fatigue properties and it provides the essential background knowledge for subsequent chapters. Different subjects are presented in the following main parts: • Basic chapters on fatigue properties and predictions (Chapters 2–8) • Load spectra and fatigue under variable-amplitude loading (Chapters 9–11) • Fatigue tests and scatter (Chapters 12 and 13) • Special fatigue conditions (Chapters 14–17) • Fatigue of joints and structures (Chapters 18–20) • Fiber-metal laminates (Chapter 21) Each chapter presents a discussion of a speci?c subject.
Download or read book The Second Joint NASA FAA DoD Conference on Aging Aircraft written by and published by . This book was released on 1999 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biaxial Multiaxial Fatigue and Fracture written by Andrea Carpinteri and published by Elsevier. This book was released on 2003-03-19 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European Structural Integrity Society (ESIS) Technical Commitee on Fatigue of Engineering Materials and Structures (TC3) decided to compile a Special Technical Publication (ESIS STP) based on the 115 papers presented at the 6th International Conference on Biaxial/Multiaxial Fatigue and Fracture. The 25 papers included in the STP have been extended and revised by the authors. The conference was held in Lisbon, Portugal, on 25-28 June 2001, and was chaired by Manual De Freitas, Instituto Superior Tecnico, Lisbon. The meeting, organised by the Instituto Superior Tecnico and sponsored by the Portuguese Minesterio da Cienca e da Tecnologia and by the European Structural Integrity Society, was attended by 151 delegates from 20 countries. The papers in the present book deal with the theoretical, numerical and experimental aspects of the Multiaxial fatigue and fracture of engineering materials and structures. They are divided in to the following six sections; Multiaxial Fatigue of Welded Structures; High cycle Multiaxial fatigue; Non proportional and Variable-Amplitude loading; Defects, Notches, Crack Growth; Low Cycle Multiaxial Fatigue; Applications and Testing Methods. As is well-known, most engineering components and structures in the mechanical, aerospace, power generation, and other industries are subjected to multiaxial loading during their service life. One of the most difficult tasks in design against fatigue and fracture is to translate the information gathered from uniaxial fatigue and fracture tests on engineering materials into applications involving complex states of cyclic stress-strain conditions. This book is the result of co-operation between many researchers from different laboratories, universities and industries in a number of countries.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1973 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book FAA NASA International Symposium on Advanced Structural Integrity Methods for Airframe Durability and Damage Tolerance Part 2 written by and published by . This book was released on 1994 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fracture Mechanics of Metals Composites Welds and Bolted Joints written by Bahram Farahmand and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the preliminary stage of designing new structural hardware to perform a given mission in a fluctuating load environment, there are several factors that the designer should consider. Trade studies for different design configurations should be performed and, based on strength and weight considerations, among others, an optimum configuration selected. The selected design must withstand the environment in question without failure. Therefore, a comprehensive structural analysis that consists of static, dynamic, fatigue, and fracture is necessary to ensure the integrity of the structure. Engineers must also consider the feasibility of fabricating the structural hardware in the material selection process. During the past few decades, fracture mechanics has become a necessary discipline for the solution of many structural problems in which the survivability of structure containing pre-existing flaws is of great interest. These problems include structural failures resulting from cracks that are inherent in the material, or defects that are introduced in the part due to improper handling or rough machining, that must be assessed through fracture mechanics concepts.
Download or read book Structural Integrity of Aging Airplanes written by Satya N. Atluri and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emergence of civil aviation as a means of mass transportation is primarily due to the large scale construction of jet airplanes in the past 30 years or so. A large number of these jet airplanes is currently operating at or beyond their designed fatigue lives. Thus, the structural integrity of these aging airplanes has become an issue of major concern to all nations of the world. To bring the needed technical and research focus on the issues involved in the life-enhancement and safety-assurance of aging airplanes, the Federal Aviation Administration sponsored a symposium in Atlanta, GA, USA, during 20-22 March 1990. This symposium, under the title "International Symposium on Structural Integrity of Aging Airplanes· was organized jointly be the Georgia Institute of Technology (Center for Computational Mechanics) and the Transportation Systems Center (Cambridge, MA) of the U.S. Department of Transportation. Industrial and academic experts from several countries in North America, Europe and Asia, were invited to discuss their experiences and proposed solutions. This monograph contains the original papers that represent the expanded and edited versions of the talks presented at this symposium. This book aims to bring the collective experience, from across the world, with problems related to the structural integrity of aging airplanes to the attention of the professional and research community at large - in the hope that it may stimulate further fruitful research on this important topic of global concern.
Download or read book FAA NASA International Symposium on Advanced Structural Integrity Methods for Airframe Durability and Damage Tolerance written by Charles E. Harris and published by . This book was released on 1994 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Identification of Damage Using Lamb Waves written by Zhongqing Su and published by Springer Science & Business Media. This book was released on 2009-09-01 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lamb waves are guided waves that propagate in thin plate or shell structures. There has been a clear increase of interest in using Lamb waves for identifying structural damage, entailing intensive research and development in this field over the past two decades. Now on the verge of maturity for diverse engineering applications, this emerging technique serves as an encouraging candidate for facilitating continuous and automated surveillance of the integrity of engineering structures in a cost-effective manner. In comparison with conventional nondestructive evaluation techniques such as ultrasonic scanning and radiography which have been well developed over half a century, damage identification using Lamb waves is in a stage of burgeoning development, presenting a number of technical challenges in application that need to be addressed and circumvented. It is these two aspects that have encouraged us to write this book, with the intention of consolidating the knowledge and know-how in the field of Lamb-wave-based damage identification, and of promoting widespread attention to mature application of this technique in the practical engineering sphere. This book provides a comprehensive description of key facets of damage identification technique using Lamb waves, based on the authors’ knowledge, comprehension and experience, ranging from fundamental theory through case studies to engineering applications.
Download or read book Fibre Metal Laminates written by Ad Vlot and published by Springer Science & Business Media. This book was released on 2011-06-28 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fibre metal laminates were developed at Delft University of Technology in The Netherlands, from the beginning of the 1980s. This is a new family of hybrid materials consisting of thin metal layers bonded together by fibres embedded in an adhesive. As a result of this build-up, fibre metal laminates possess a mixture of the characteristics of both metals and composite materials. Initial development led to the `Arall' variant using aramid fibres, which was first applied on the C-17 military transport aircraft around 1990. Large-scale application became possible with a variant using glass fibres, dubbed `Glare', which was selected for the Airbus A380 super jumbo in 2001. This is the first book to discuss these new materials and it deals mostly with Glare. It covers most of the relevant aspects of the materials, from static mechanical properties, fatigue and impact to design, production and maintenance of aircraft structures. This book contains the basic information on these new materials necessary for engineers and aircraft operators alike.
Download or read book Composite Joints and Connections written by P Camanho and published by Elsevier. This book was released on 2011-10-12 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growing use of composites over metals for structural applications has made a thorough understanding of the behaviour of composite joints in various applications essential for engineers, but has also presented them with a new set of problems. Composite joints and connections addresses these differences and explores the design, modelling and testing of bonded and bolted joints and connections.Part one discusses bolted joints whilst part two examines bonded joints. Chapters review reinforcement techniques and applications for composite bolted and bonded joints and investigate the causes and effects of fatigue and stress on both types of joint in various applications and environments. Topics in part one include metal hybridization, glass-reinforced aluminium (GLARE), hybrid fibre metal laminates (FML), glass fibre reinforced polymer (GFRP) and carbon fibre reinforced polymer (CFRP) composites. Topics in part two include calculation of strain energy release rates, simulating fracture and fatigue failure using cohesive zone models, marine and aerospace applications, advanced modelling, stress analysis of bonded patches and scarf repairs.Composite joints and connections is a valuable reference for composite manufacturers and composite component fabricators, the aerospace, automotive, shipbuilding and civil engineering industries and for anyone involved in the joining and repair of composite structures. - Explores the design, modelling and testing of bonded and bolted joints and connections - Reviews reinforcement techniques and applications for composite bolted and bonded joints - Investigates the causes and effects of fatigue and stress on bolted and bonded joints in various applications and environments
Download or read book Bridge Maintenance Safety Management Life Cycle Sustainability and Innovations written by Hiroshi Yokota and published by CRC Press. This book was released on 2021-04-20 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridge Maintenance, Safety, Management, Life-Cycle Sustainability and Innovations contains lectures and papers presented at the Tenth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2020), held in Sapporo, Hokkaido, Japan, April 11–15, 2021. This volume consists of a book of extended abstracts and a USB card containing the full papers of 571 contributions presented at IABMAS 2020, including the T.Y. Lin Lecture, 9 Keynote Lectures, and 561 technical papers from 40 countries. The contributions presented at IABMAS 2020 deal with the state of the art as well as emerging concepts and innovative applications related to the main aspects of maintenance, safety, management, life-cycle sustainability and technological innovations of bridges. Major topics include: advanced bridge design, construction and maintenance approaches, safety, reliability and risk evaluation, life-cycle management, life-cycle sustainability, standardization, analytical models, bridge management systems, service life prediction, maintenance and management strategies, structural health monitoring, non-destructive testing and field testing, safety, resilience, robustness and redundancy, durability enhancement, repair and rehabilitation, fatigue and corrosion, extreme loads, and application of information and computer technology and artificial intelligence for bridges, among others. This volume provides both an up-to-date overview of the field of bridge engineering and significant contributions to the process of making more rational decisions on maintenance, safety, management, life-cycle sustainability and technological innovations of bridges for the purpose of enhancing the welfare of society. The Editors hope that these Proceedings will serve as a valuable reference to all concerned with bridge structure and infrastructure systems, including engineers, researchers, academics and students from all areas of bridge engineering.
