Download or read book Plastic Deformation of Ceramics written by R.C. Bradt and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume, "Plastic Deformation of Ceramics," constitutes the papers of an international symposium held at Snowbird, Utah from August 7-12, 1994. It was attended by nearly 100 scientists and engineers from more than a dozen countries representing academia, national laboratories, and industry. Two previous conferences on this topic were held at The Pennsylvania State University in 1974 and 1983. Therefore, the last major international conference focusing on the deformation of ceramic materials was held more than a decade ago. Since the early 1980s, ceramic materials have progressed through an evolutionary period of development and advancement. They are now under consideration for applications in engineering structures. The contents of the previous conferences indicate that considerable effort was directed towards a basic understanding of deformation processes in covalently bonded or simple oxide ceramics. However, now, more than a decade later, the focus has completely shifted. In particular, the drive for more efficient heat engines has resulted in the development of silicon-based ceramics and composite ceramics. The discovery of high-temperature cupric oxide-based superconductors has created a plethora of interesting perovskite-Iike structured ceramics. Additionally, nanophase ceramics, ceramic thin films, and various forms of toughened ceramics have potential applications and, hence, their deformation has been investigated. Finally, new and exciting areas of research have attracted interest since 1983, including fatigue, nanoindentation techniques, and superplasticity.
Download or read book Ceramic matrix composites and other systems written by Antonio Miravete and published by Woodhead Publishing. This book was released on 1993 with total page 924 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cyclic Deformation Fracture and Nondestructive Evaluation of Advanced Materials written by Michael R. Mitchell and published by ASTM International. This book was released on 1992 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Matrix Composites written by R. Warren and published by Springer Science & Business Media. This book was released on 1991-12-31 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: By combining the properties and strengths of various materials it is possible to produce a hybrid or composite material with properties ideally suited to a specific application, and this is particularly important for developing new materials for rapidly growing high-technology industries.
Download or read book Fracture Mechanics of Ceramics written by R.C. Bradt and published by Springer. This book was released on 2005-07-29 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 8th International Symposium on fracture mechanics of ceramics was held in on the campus of the University of Houston, Houston, TX, USA, on February 25-28, 2003. With the natural maturing of the fields of structural ceramics, this symposium focused on nano-scale materials, composites, thin films and coatings as well as glass. The symposium also addressed new issues on fundamentals of fracture mechanics and contact mechanics, and a session on reliability and standardization.
Download or read book Ceramic Matrix Composites written by Krishan K. Chawla and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials science and engineering (MS&E) is by its very nature an inter disciplinary activity. Researchers from a wide variety of disciplines, metal lurgy, ceramics, physics, chemistry, mechanics, electrical and electronic engineering, etc. can and do participate in the MS&E activities. The need and desirability of such an interdisciplinary effort is understandable inas much as advanced or high-performance materials are critical for any of the modern industries. It is almost a given axiom that progress in any field (energy, building materials, transportation, electronics, aerospace, electric power, consumer products, etc.) depends on the availability of suitable In this regard, let me quote from materials having specific characteristics. another work of mine: It is a truism that technological development depends on advances in the field of materials. One does not have to be an expert to realize that a most advanced turbine or aircraft design is of no use if adequate materials to bear the service loads and conditions are not available. Whatever the field may be, the final limitation on advancement depends on materials [1]. It is pertinent to quote from some other sources about a fundamental change that is occurring in the materials field: A fundamental reversal in the relationship between human beings and materials [has occurred]. Its economic consequences are likely to be profound. Historically humans have adapted such natural materials as stone, wood, clay, vegetable fiber and animal tissue to economic uses.
Download or read book Ceramic Matrix Composites written by Narottam P. Bansal and published by John Wiley & Sons. This book was released on 2014-10-27 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive source of information on various aspects of ceramic matrix composites (CMC). It covers ceramic and carbon fibers; the fiber-matrix interface; processing, properties and industrial applications of various CMC systems; architecture, mechanical behavior at room and elevated temperatures, environmental effects and protective coatings, foreign object damage, modeling, life prediction, integration and joining. Each chapter in the book is written by specialists and internationally renowned researchers in the field. This book will provide state-of-the-art information on different aspects of CMCs. The book will be directed to researchers working in industry, academia, and national laboratories with interest and professional competence on CMCs. The book will also be useful to senior year and graduate students pursuing degrees in ceramic science and engineering, materials science and engineering, aeronautical, mechanical, and civil or aerospace engineering. Presents recent advances, new approaches and discusses new issues in the field, such as foreign object damage, life predictions, multiscale modeling based on probabilistic approaches, etc. Caters to the increasing interest in the application of ceramic matrix composites (CMC) materials in areas as diverse as aerospace, transport, energy, nuclear, and environment. CMCs are considered ans enabling technology for advanced aeropropulsion, space propulsion, space power, aerospace vehicles, space structures, as well as nuclear and chemical industries. Offers detailed descriptions of ceramic and carbon fibers; fiber-matrix interface; processing, properties and industrial applications of various CMC systems; architecture, mechanical behavior at room and elevated temperatures, environmental effects and protective coatings, foreign object damage, modeling, life prediction, integration/joining.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book American Society of Composites Ninth International Conference Proceedings written by Amer Society Composi and published by CRC Press. This book was released on 1994-09-23 with total page 1338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Cycle Fatigue of Structural Materials written by W. O. Soboyejo and published by Minerals, Metals, & Materials Society. This book was released on 1997 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examining underlying mechanisms governing the high-cycle fatigue behavior of structural materials, this book from Materials Week '97 focuses on the high-cycle fatigue behavior of existing aluminum, nickel, and titanium-base alloys. Mechanical and empirical approaches to the assessment of environment and temperature effects are examined, along with probable approaches for the prediction of high-cycle fatigue behavior under both uniaxial and multiaxial stresses.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1989 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Acoustic Emission Testing written by Christian U. Grosse and published by Springer Nature. This book was released on 2021-07-14 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to Acoustic Emission Testing and its applications to different materials like concrete, steel, ceramics, geotechnical materials, polymers, biological structures and wood. Acoustic Emission Techniques (AET) techniques have been studied in engineering for a long time. The techniques are applied more and more to practical investigations and are more and more standardized in codes. This is because the degradation of structures due to ageing urgently demand for maintenance and rehabilitation of structures in service. It results in the need for the development of advanced and efficient inspection techniques. In mechanical engineering and concerning the monitoring of machines and mechanical components, AE is a widely accepted observing deterioration in the frame of structural health monitoring. The advantages of AE like sensitivity, damage localization potential, non-intrusive nature as well as developments in signal analysis and data transmission allow applications that could not be considered decades ago. As such, AE techniques draw great attention to diagnostic applications and in material testing. This book covers all levels from the description of AE basics for AE beginners (level of a student) to sophisticated AE algorithms and applications to real large-scale structures as well as the observation of the cracking process in laboratory specimen to study fracture processes. This book has proved its worth over the past twelve years. Now in its second edition, it will be a resource that sets the standard and equips readers for the future. All chapters from the 1st edition have been updated and rewritten and eight extra chapters (e.g also regarding AE tomography, AE in plate-like structures and AE for investigations of hardening of fresh concrete) have been added.
Download or read book Comprehensive Structural Integrity written by Ian Milne and published by Elsevier. This book was released on 2003-07-25 with total page 4647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this major reference work is to provide a first point of entry to the literature for the researchers in any field relating to structural integrity in the form of a definitive research/reference tool which links the various sub-disciplines that comprise the whole of structural integrity. Special emphasis will be given to the interaction between mechanics and materials and structural integrity applications. Because of the interdisciplinary and applied nature of the work, it will be of interest to mechanical engineers and materials scientists from both academic and industrial backgrounds including bioengineering, interface engineering and nanotechnology. The scope of this work encompasses, but is not restricted to: fracture mechanics, fatigue, creep, materials, dynamics, environmental degradation, numerical methods, failure mechanisms and damage mechanics, interfacial fracture and nano-technology, structural analysis, surface behaviour and heart valves. The structures under consideration include: pressure vessels and piping, off-shore structures, gas installations and pipelines, chemical plants, aircraft, railways, bridges, plates and shells, electronic circuits, interfaces, nanotechnology, artificial organs, biomaterial prostheses, cast structures, mining... and more. Case studies will form an integral part of the work.
Download or read book Introduction to Fatigue in Metals and Composites written by R.L. Carlson and published by Springer Science & Business Media. This book was released on 1995-11-30 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Fatigue in Metals and Composites provides a balanced treatment of the phenomenon of fatigue in metals, nonmetals and composites with polymeric, metallic and ceramic matrices. The applicability of the safe life philosophy of design is examined for each of the materials. Attention is also focused on the stable crack growth phase of fatigue and differences in the operative mechanisms for the various classes of materials are considered. The impacts of these differences on the development of damage tolerance strategies are examined. Among topics discussed are; variable amplitude loading with tensile and compressive overload; closure obstruction; bridging mechanisms; mixed mode states; small cracks; delamination mechanisms and environmental conditions. The arrangement and presentation of the topics are such that An Introduction to Fatigue in Metals and Composites can serve as a course text for mechanical, civil, aeronautical and astronautical engineering and material science courses as well as a reference for engineers who are concerned with fatigue testing and aircraft, automobile and engine design.
Download or read book Mechanical Testing Methodology for Ceramic Design and Reliability written by David C. Cranmer and published by CRC Press. This book was released on 1998-02-06 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describing the theoretical aspects of chemistry and microstructure that affect mechanical properties, this work offers coverage of ceramic mechanical property measurement techniques for use in component design as well as lifetime and reliability predictions. It presents procedures from both room- and elevated-temperature applications.
Download or read book Durability of Ceramic Matrix Composites written by Longbiao Li and published by Woodhead Publishing. This book was released on 2020-02-07 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Durability of Ceramic-Matrix Composites presents the latest information on these high-temperature structural materials and their outstanding advantages over more conventional materials, including their high specific strength, high specific modulus, high temperature resistance and good thermal stability. The critical nature of the application of these advanced materials makes it necessary to have a complete understanding of their characterization. This book focuses explicitly on the durability of CMCs and will be extremely valuable for materials scientists and engineers who are dealing with the simulation of durability response and fatigue of ceramic matrix composites. - Provides the latest theoretical and applied research in the field of ceramic matrix composites, particularly as it relates to usage in aerospace propulsion systems - Presents extensive information on the micromechanics of damage evolution, lifetime prediction and durability in ceramic matrix composites - Details parameter studies that are valuable for materials development and lifetime durability studies
Download or read book Microstructure Property Correlations for Hard Superhard and Ultrahard Materials written by Valentine Kanyanta and published by Springer. This book was released on 2016-05-31 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses microstructure-property correlations and explores key microstructure features and how they affect the properties of a material. The authors discuss the effect of manufacturing and processing routes on microstructure and properties. They identify appropriate microstructure and mechanical characterization techniques essential for developing accurate microstructure-property relationships. The techniques include high resolution imaging methods and properties measurements such as hardness, strength, elastic modulus, and fracture toughness. Current and future trends in hard and superhard material design are revealed by the authors, including nanostructured materials, biomimicry, and novel manufacturing technologies.
