Download or read book Fatigue and Fracture Reliability Engineering written by J.J. Xiong and published by Springer Science & Business Media. This book was released on 2011-01-22 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue and Fracture Reliability Engineering is an attempt to present an integrated and unified approach to reliability determination of fatigue and fracture behaviour, incorporating probability, statistics and other related areas. A series of original and practical approaches, are suggested in Fatigue and Fracture Reliability Engineering, including new techniques in determining fatigue and fracture performances. It also carries out an investigation into static and fatigue properties, and into the failure mechanisms of unnotched and notched CFR composite laminates with different lay-ups to optimize the stacking sequence effect. Further benefits include: a novel convergence-divergence counting procedure to extract all load cycles from a load history of divergence-convergence waves; practical scatter factor formulae to determine the safe fatigue crack initiation and propagation lives from the results of a single full-scale test of a complete structure; and a nonlinear differential kinetic model for describing the dynamical behaviour of an atom at a fatigue crack tip. Fatigue and Fracture Reliability Engineering is intended for practising engineers in marine, civil construction, aerospace, offshore, automotive and chemical industries. It is also useful reading for researchers on doctoral programmes, and is appropriate for advanced undergraduate and postgraduate programmes in any mechanically-oriented engineering discipline.
Download or read book Fatigue and Fracture Reliability Engineering written by and published by . This book was released on 2011-07-11 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue and Fracture Reliability Engineering written by Jun Jiang Xiong and published by Springer. This book was released on 2011-01-24 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue and Fracture Reliability Engineering is an attempt to present an integrated and unified approach to reliability determination of fatigue and fracture behaviour, incorporating probability, statistics and other related areas. A series of original and practical approaches, are suggested in Fatigue and Fracture Reliability Engineering, including new techniques in determining fatigue and fracture performances. It also carries out an investigation into static and fatigue properties, and into the failure mechanisms of unnotched and notched CFR composite laminates with different lay-ups to optimize the stacking sequence effect. Further benefits include: a novel convergence-divergence counting procedure to extract all load cycles from a load history of divergence-convergence waves; practical scatter factor formulae to determine the safe fatigue crack initiation and propagation lives from the results of a single full-scale test of a complete structure; and a nonlinear differential kinetic model for describing the dynamical behaviour of an atom at a fatigue crack tip. Fatigue and Fracture Reliability Engineering is intended for practising engineers in marine, civil construction, aerospace, offshore, automotive and chemical industries. It is also useful reading for researchers on doctoral programmes, and is appropriate for advanced undergraduate and postgraduate programmes in any mechanically-oriented engineering discipline.
Download or read book Proceedings of Fatigue Durability and Fracture Mechanics written by S. Seetharamu and published by Springer. This book was released on 2017-11-01 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of Fatigue Durability India 2016, which was held on September 28–30 at J N Tata Auditorium, Indian Institute of Science, Bangalore. This 2nd International Conference & Exhibition brought international industrial experts and academics together on a single platform to facilitate the exchange of ideas and advances in the field of fatigue, durability and fracture mechanics and its applications. This book comprises articles on a broad spectrum of topics from design, engineering, testing and computational evaluation of components and systems for fatigue, durability, and fracture mechanics. The topics covered include interdisciplinary discussions on working aspects related to materials testing, evaluation of damage, nondestructive testing (NDT), failure analysis, finite element modeling (FEM) analysis, fatigue and fracture, processing, performance, and reliability. The contents of this book will appeal not only to academic researchers, but also to design engineers, failure analysts, maintenance engineers, certification personnel, and R&D professionals involved in a wide variety of industries.
Download or read book NDT Methods Applied to Fatigue Reliability Assessment of Structures written by Jamshid Mohammadi and published by Amer Society of Civil Engineers. This book was released on 2004 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report contains nine specific-application cases of various nondestructive test (NDT) methods in fatigue and fracture reliability assessment of structures.
Download or read book Fatigue Design and Reliability written by G. Marquis and published by Elsevier. This book was released on 1999-02-19 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume represents a selection of papers presented at the Third International Symposium on Fatigue Design, Fatigue Design 1998, held in Espoo, Finland, 26-29 May, 1998. One objective of this symposium series was to help bridge the gap that sometimes exists between researchers and engineers responsible for designing components against fatigue failure. The 21 selected papers provide an up-to-date survey of engineering practice and a preview of design methods that are advancing toward application. Reliability was selected as a key theme for FD'98. During the design of components and structures, it is not sufficient to combine mean material properties, average usage parameters, and pre-selected safety factors. The engineer must also consider potential scatter in material properties, different end users, manufacturing tolerances and uncertainties in fatigue damage models. Judgement must also be made about the consequences of potential failure and the required degree of reliability for the structure or component during its service life. Approaches to ensuring reliability may vary greatly depending on the structure being designed. Papers in this volume intentionally provide a multidisciplinary perspective on the issue. Authors represent the ground vehicle, heavy equipment, power generation, ship building and other industries. Identical solutions cannot be used in all cases because design methods must always provide a balance between accuracy and simplicity. The point of balance will shift depending on the type of input data available and the component being considered.
Download or read book Fatigue and Fracture Mechanics of High Risk Parts written by Bahram Farahmand and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the preliminary stage of designing new structural hardware that must perform a given mission in a fluctuating load environment, there are several factors the designers should consider. Trade studies for different design configurations should be performed and, based on strength and weight considerations, among others, an optimum configuration selected. The selected design must be able to withstand the environment in question without failure. Therefore, a comprehen sive structural analysis that consists of static, dynamic, fatigue, and fracture is necessary to ensure the integrity of the structure. During the past few decades, fracture mechanics has become a necessary discipline for the solution of many structural problems. These problems include the prevention of failures resulting from preexisting cracks in the parent material, welds or that develop under cyclic loading environment during the life of the structure. The importance of fatigue and fracture in nuclear, pressure vessel, aircraft, and aerospace structural hardware cannot be overemphasized where safety is of utmost concern. This book is written for the designer and strength analyst, as well as for the material and process engineer who is concerned with the integrity of the structural hardware under load-varying environments in which fatigue and frac ture must be given special attention. The book is a result of years of both acade mic and industrial experiences that the principal author and co-authors have accumulated through their work with aircraft and aerospace structures.
Download or read book Applications of Automation Technology to Fatigue and Fracture Testing and Analysis written by Arthur A. Braun and published by ASTM International. This book was released on 1997 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: From a November 1995 symposium in Norfolk, Virginia 11 papers report on how computers are playing an ever greater role in testing for fatigue and fracture as applications have become more sophisticated and hardware smaller and more powerful over the past few years. Covering data acquisition, simulat
Download or read book Probabilistic Methods in Fatigue and Fracture written by A. B. O. Soboyejo and published by . This book was released on 2001 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book presents an in-depth report on probabilistic methods used to study fatigue and fracture of engineering materials. It is divided into three sections: fatigue; reliability modeling; and statistical methods. The book will serve as a useful new reference on probabilistic methods in fatigue and fracture. It should be of interest to researchers and engineers in industry and academia.
Download or read book In Service Fatigue Reliability of Structures written by Sergei V. Petinov and published by Springer. This book was released on 2018-04-09 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with the latest know-how and tools needed to assess the in-service strength and reliability of welded structures. It addresses the two principal mechanisms of structural material deterioration, fatigue and corrosion, which affect the in-service behavior of structures. In this regard, the primary focus is on fatigue in connection with various structural failure scenarios. Realistic and typical examples of welded structures’ design and residual life assessment are used throughout the book in order to show readers the complexity of real-world assessments. The book offers a valuable resource for master’s students in mechanical and civil engineering, and for engineers whose work involves fatigue design and in-service inspections of welded structures.
Download or read book Engineering Against Fracture written by S. G. Pantelakis and published by Springer Science & Business Media. This book was released on 2009-02-14 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within the last thirty years there is a growing acknowledgement that prevention of catastrophic failures necessitates engagement of a large pool of expertise. Herein it is not excessive to seek advice from disciplines like materials science, structural engineering, mathematics, physics, reliability engineering and even economics. Today’s engineering goals, independently of size; do not have the luxury of being outsideaglobalperspective.Survivaloftheintegratedmarketsand?nancialsystems require a web of safe transportation, energy production and product manufacturing. It is perhaps the ?rst decade in engineering history that multidisciplinary - proaching is not just an idea that needs to materialise but has matured beyond infancy. We can witness such transition by examining engineering job descriptions and postgraduate curricula. The undertaking of organising a conference to re?ect the above was not easy and de?nitely, not something that was brought to life without a lot of work and c- st mitment. The 1 Conference of Engineering Against Fracture from its conceptual day until completion was designed in a way of underlying the need of bringing all the key players on a common ground that once properly cultivated can ?ourish. To achieve that the conference themes were numerous and despite their, in principle notional differences, it was apparent that the attendees established such common ground through argumentation. The reader can see this from the variety of research areas re?ected by the works and keynote lecturers presented.
Download or read book Fracture at all Scales written by Guy Pluvinage and published by Springer. This book was released on 2016-09-13 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of selected papers from the 2014 New Trends in Fatigue and Fracture (NT2F14) Conference, which was held in Belgrade, Serbia. This prestigious conference brought together delegates from around the globe to discuss how to characterize, predict and analyze the fatigue and fracture of engineering materials, components, and structures using theoretical, experimental, numerical and practical approaches. It highlights some important new trends in fracture mechanics presented at the conference, such as: • two-parameter fracture mechanics, arising from the coupling of fracture toughness and stress constraints • high-performance steel for gas and oil transportation and production (pressure vessels and boilers) • safety and reliability of welded joints This book includes 12 contributions from well-known international scientists and a special tribute dedicated to the scientific contributions of Stojan Sedmark, who passed away in 2014.
Download or read book Fatigue and Fracture of Adhesively Bonded Composite Joints written by Anastasios Vassilopoulos and published by Woodhead Publishing. This book was released on 2014-11-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is commonly accepted that the majority of engineering failures happen due to fatigue or fracture phenomena. Adhesive bonding is a prevailing joining technique, widely used for critical connections in composite structures. However, the lack of knowledge regarding fatigue and fracture behaviour, and the shortage of tools for credible fatigue design, hinders the potential benefits of adhesively bonded joints. The demand for reliable and safe structures necessitates deep knowledge in this area in order to avoid catastrophic structural failures. This book reviews recent research in the field of fatigue and fracture of adhesively-bonded composite joints. The first part of the book discusses the experimental investigation of the reliability of adhesively-bonded composite joints, current research on understanding damage mechanisms, fatigue and fracture, durability and ageing as well as implications for design. The second part of the book covers the modelling of bond performance and failure mechanisms in different loading conditions.
Download or read book Topics in Fracture and Fatigue written by A.S. Argon and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture in structural materials remains a vital consideration in engineering systems, affecting the reliability of machines throughout their lives. Impressive advances in both the theoretical understanding of fracture mechanisms and practical developments that offer possibilities of control have re-shaped the subject over the past four decades. The contributors to this volume, including some of the most prominent researchers in the field, give their long-range perspectives of the research on the fracture of solids and its achievements. The subjects covered in this volume include: statistics of brittle fracture, transition of fracture from brittle to ductile, mechanics and mechanisms of ductile separation of heterogenous solids, the crack tip environment in ductile fracture, and mechanisms and mechanics of fatigue. Materials considered range from the usual structural solids to composites. The chapters include both theoretical points of view and discussions of key experiments. Contributors include: from MIT, A.S. Argon, D.M. Parks; from Cambridge, M.F. Ashby; from U.C. Santa Barbara, A.G. Evans, R. McMeeking; from Glasgow, J. Hancock; from Harvard, J.W. Hutchinson, J.R. Rice; from Sheffield, K.J. Miller; from Brown, A. Needleman; from the Ecole des Mines, A. Pineau; from U.C. Berkeley, R. O. Ritchie; and from Copenhagen, V. Tvergaard.
Download or read book Applications of Automation Technology in Fatigue and Fracture Testing and Analysis written by Arthur A. Braun and published by ASTM International. This book was released on 2002 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Damage and Fracture Mechanics written by Taoufik Boukharouba and published by Springer Science & Business Media. This book was released on 2009-08-09 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: The First African InterQuadrennial ICF Conference “AIQ-ICF2008” on Damage and Fracture Mechanics – Failure Analysis of Engineering Materials and Structures”, Algiers, Algeria, June 1–5, 2008 is the first in the series of InterQuadrennial Conferences on Fracture to be held in the continent of Africa. During the conference, African researchers have shown that they merit a strong reputation in international circles and continue to make substantial contributions to the field of fracture mechanics. As in most countries, the research effort in Africa is und- taken at the industrial, academic, private sector and governmental levels, and covers the whole spectrum of fracture and fatigue. The AIQ-ICF2008 has brought together researchers and engineers to review and discuss advances in the development of methods and approaches on Damage and Fracture Mechanics. By bringing together the leading international experts in the field, AIQ-ICF promotes technology transfer and provides a forum for industry and researchers of the host nation to present their accomplishments and to develop new ideas at the highest level. International Conferences have an important role to play in the technology transfer process, especially in terms of the relationships to be established between the participants and the informal exchange of ideas that this ICF offers.
Download or read book Metal Fatigue written by L.P. Pook and published by Springer Science & Business Media. This book was released on 2007-04-30 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents important concepts in metal fatigue in a straightforward manner, for the benefit of readers who must understand more advanced documents on a wide range of metal fatigue topics. The text shows how metal fatigue problems are solved in engineering practice. The book assumes no prior knowledge of metal fatigue, requiring only a basic understanding of stress analysis and mathematics covered in engineering undergraduate courses.
