Download or read book Teaching and Education in Fracture and Fatigue written by H.P. Rossmanith and published by CRC Press. This book was released on 2003-09-02 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings contains the best contributions to the series of seminars held in Vienna (1992), Miskolc, Hungary (1993 and 1994) and Vienna (1995) and provides a valuable resource for those concerned with the teaching of fracture and fatigue. It presents a wide range of approaches relevant to course and curriculum development. It is aimed particu

Download or read book Fatigue and Fracture 1996 written by and published by . This book was released on 1996 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second of two volumes on the subject containing papers from a symposium of the July 1996 meeting. Thirty papers are arranged in four sections on new areas of fracture mechanics; material fracture toughness; failure assessment diagram method user experience (with four application-type papers); an

Download or read book Fracture and Fatigue in Wood written by Ian Smith and published by John Wiley & Sons. This book was released on 2003-06-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Damage in wood is principally the result of fatigue. Fatigue is the process of progressive localised irreversible change in a material, and may culminate in cracks or complete fracture if conditions that initiated or propagated the process persist. Comprehensive understanding of fatigue and fracture in engineered wood components must be founded on a proper understanding of the damage processes. Although wood is the world's most widely used structural material, whether measured by volume consumed or value of finished construction, its behaviour is not well understood even by people who have spent their careers studying it. * What is known about failure processes comes almost entirely from empirical evidence collected for engineering purposes. * Hypotheses about behaviour of wood are based on macroscopic observation of specimens during and following tests. * With only limited resources and the need to obtain practical results quickly, the timber engineering research community has steered away from the scientific approach. * Forestry practices are changing and are known to influence characteristics of wood cells therefore there is a need to periodically reassess the mechanical properties of visually graded lumber the blackbox approach. Fatigue and Fracture of Wood examines the above issues from a scientific point of view by drawing on the authors' own research as well as previously published material. Unlike the empirical research, the book begins by examining growth of wood. It briefly examines its structure in relation to how trees grow, before assessing the fatigue and fracture of wood and discussing the scientific methods of modelling fatigue. * Covers from macro to micro behaviour of wood * Presents direct evidence of how wood fractures using Scanning Electron Microscopy * The first book to present a physically correct model for fracture in wood * Provides experimental proof of so-called memory in wood (i.e. dependence of fatigue behaviour on the loading sequence) * Givse practical illustrations of how theories and models can be applied in practice An essential resource for wood scientists/engineers, timber-engineering practitioners, and graduate students studying wood and solid mechanics.

Download or read book Fatigue and Fracture written by F. C. Campbell and published by ASM International. This book was released on 2012-01-01 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book emphasizes the physical and practical aspects of fatigue and fracture. It covers mechanical properties of materials, differences between ductile and brittle fractures, fracture mechanics, the basics of fatigue, structural joints, high temperature failures, wear, environmentally-induced failures, and steps in the failure analysis process."--publishers website.

Download or read book ASM HANDBOOK VOLUME 4F written by ASM INTERNATIONAL. and published by . This book was released on 2024 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fatigue Damage Crack Growth and Life Prediction written by F. Ellyin and published by Springer Science & Business Media. This book was released on 1996-11-30 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue failure is a multi-stage process. It begins with the initiation of cracks, and with continued cyclic loading the cracks propagate, finally leading to the rupture of a component or specimen. The demarcation between the above stages is not well-defined. Depending upon the scale of interest, the variation may span three orders of magnitude. For example, to a material scientist an initiated crack may be of the order of a micron, whereas for an engineer it can be of the order of a millimetre. It is not surprising therefore to see that investigation of the fatigue process has followed different paths depending upon the scale of phenomenon under investigation. Interest in the study of fatigue failure increased with the advent of industrial ization. Because of the urgent need to design against fatigue failure, early investiga tors focused on prototype testing and proposed failure criteria similar to design formulae. Thus, a methodology developed whereby the fatigue theories were proposed based on experimental observations, albeit at times with limited scope. This type of phenomenological approach progressed rapidly during the past four decades as closed-loop testing machines became available.

Download or read book Fatigue 96 written by G. Lütjering and published by Elsevier. This book was released on 1996-05-20 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the 6th International Fatigue Congress, besides covering the entire field of fatigue, was to promote the intimate connection between basic science and engineering application by the selection of appropriate session topics. Fatigue is the main cause of failure of engineering structures and components. Making reliable fatigue predictions is highly difficult because knowledge about fatigue mechanisms in all stages of the fatigue process must be developed much further. In addition, the decreasing availability of raw materials and energy resources forces engineers to continually reduce the weight of constructions. This congress presents research results also particularly for new materials, including composites. Researchers, on the other hand, are confronted with the engineering demands. Futhermore, the overwhelming development which is presently taking place in the field of computer software and hardware dealing with fatigue problems is outlined along with the directions of future developments in all areas of fatigue. Close to 300 fully peer-reviewed papers are published in the proceedings, including nearly 30 overview and keynote papers covering the various session topics. The proceedings should therefore serve as a comprehensive review of the fatigue field at the present state-of-the-art, suitable for scientists, engineers and students.

Download or read book Trip report on the astm 28th national symposium on fatigue and fracture mechanics saratoga springs new york June 25 27 1996 written by P. H. Davies and published by . This book was released on 1996 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Notch Effects in Fatigue and Fracture written by G. Pluvinage and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: As Directors of this NATO Workshop, we welcome this opportunity to record formally our thanks to the NATO Scientific Affairs Division for making our meeting possible through generous financial support and encouragement. This meeting has two purposes: the first obvious one because we have collected scientists from East, far East and west to discuss new development in the field of fracture mechanics: the notch fracture mechanics. The second is less obvious but perhaps in longer term more important that is the building of bridges between scientists in the frame of a network called Without Walls Institute on Notch Effects in Fatigue and Fracture". Physical perception of notch effects is not so easy to understand as the presence of a geometrical discontinuity as a worst effect than the simple reduction of cross section. Notch effects in fatigue and fracture is characterised by the following fundamental fact: it is not the maximum local stress or stress which governs the phenomena of fatigue and fracture. The physic shows that a process volume is needed probably to store the necessary energy for starting and propagating the phenomenon. This is a rupture of the traditional "strength of material" school which always give the prior importance of the local maximum stress. This concept of process volume was strongly affirmed during this workshop.

Download or read book Fatigue and Fracture Mechanics written by Kenneth L. Jerina and published by ASTM International. This book was released on 2000 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fatigue and Fracture Mechanics written by Sreeramesh Kalluri and published by . This book was released on 2011 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fatigue and Fracture Mechanics written by and published by . This book was released on 1911 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fatigue of Structures and Materials written by J. Schijve and published by Springer Science & Business Media. This book was released on 2008-12-16 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue of structures and materials covers a wide scope of different topics. The purpose of the present book is to explain these topics, to indicate how they can be analyzed, and how this can contribute to the designing of fatigue resistant structures and to prevent structural fatigue problems in service. Chapter 1 gives a general survey of the topic with brief comments on the signi?cance of the aspects involved. This serves as a kind of a program for the following chapters. The central issues in this book are predictions of fatigue properties and designing against fatigue. These objectives cannot be realized without a physical and mechanical understanding of all relevant conditions. In Chapter 2 the book starts with basic concepts of what happens in the material of a structure under cyclic loads. It illustrates the large number of variables which can affect fatigue properties and it provides the essential background knowledge for subsequent chapters. Different subjects are presented in the following main parts: • Basic chapters on fatigue properties and predictions (Chapters 2–8) • Load spectra and fatigue under variable-amplitude loading (Chapters 9–11) • Fatigue tests and scatter (Chapters 12 and 13) • Special fatigue conditions (Chapters 14–17) • Fatigue of joints and structures (Chapters 18–20) • Fiber-metal laminates (Chapter 21) Each chapter presents a discussion of a speci?c subject.

Download or read book The Mechanics of Fracture and Fatigue written by A. P. Parker and published by Spon Press. This book was released on 1981 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nonlinear Fracture Mechanics for Engineers written by Ashok Saxena and published by CRC Press. This book was released on 1998-03-31 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture mechanics is an essential tool for engineers in a number of different engineering disciplines. For example, an engineer in a metals- or plastics-dependent industry might use fracture mechanics to evaluate and characterize materials, while another in aerospace or construction might use fracture mechanics-based methods for product design and service life-time estimation. This balanced treatment, which covers both applied engineering and mathematical aspects of the topic, provides a much-needed multidisciplinary treatment of the field suitable for the many diverse applications of the subject. While texts on linear elastic fracture mechanics abound, no complete treatments of the complex topic of nonlinear fracture mechanics have been available in a textbook format - until now. Written by an author with extensive industry credentials as well as academic experience, Nonlinear Fracture Mechanics for Engineers examines nonlinear fracture mechanics and its applications in mechanics, materials testing, and life prediction of components. The book includes the first-ever complete examination of creep and creep-fatigue crack growth. Examples and problems reinforce the concepts presented. A complete chapter on applications and case studies involving nonlinear fracture mechanics completes this thorough evaluation of this dynamic field of study.

Download or read book Applications of Continuum Damage Mechanics to Fatigue and Fracture written by David L. McDowell and published by ASTM International. This book was released on 1997 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains papers from the May 1996 Symposium on Applications of Continuum Damage Mechanics (CDM) to Fatigue and Fracture. Papers in Section I deal with various aspects of modeling damage in composite materials, such as high temperature environmental degradation, fatigue, and viscous damage in metal a

Download or read book Fatigue and Fracture Mechanics written by and published by . This book was released on 1997 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: