Download or read book Fast Optical and Process Proximity Correction Algorithms for Integrated Circuit Manufacturing written by Nicolas Bailey Cobb and published by . This book was released on 1998 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book EDA for IC Implementation Circuit Design and Process Technology written by Luciano Lavagno and published by CRC Press. This book was released on 2018-10-03 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting a comprehensive overview of the design automation algorithms, tools, and methodologies used to design integrated circuits, the Electronic Design Automation for Integrated Circuits Handbook is available in two volumes. The second volume, EDA for IC Implementation, Circuit Design, and Process Technology, thoroughly examines real-time logic to GDSII (a file format used to transfer data of semiconductor physical layout), analog/mixed signal design, physical verification, and technology CAD (TCAD). Chapters contributed by leading experts authoritatively discuss design for manufacturability at the nanoscale, power supply network design and analysis, design modeling, and much more. Save on the complete set.
Download or read book Handbook of Algorithms for Physical Design Automation written by Charles J. Alpert and published by CRC Press. This book was released on 2008-11-12 with total page 1044 pages. Available in PDF, EPUB and Kindle. Book excerpt: The physical design flow of any project depends upon the size of the design, the technology, the number of designers, the clock frequency, and the time to do the design. As technology advances and design-styles change, physical design flows are constantly reinvented as traditional phases are removed and new ones are added to accommodate changes in technology. Handbook of Algorithms for Physical Design Automation provides a detailed overview of VLSI physical design automation, emphasizing state-of-the-art techniques, trends and improvements that have emerged during the previous decade. After a brief introduction to the modern physical design problem, basic algorithmic techniques, and partitioning, the book discusses significant advances in floorplanning representations and describes recent formulations of the floorplanning problem. The text also addresses issues of placement, net layout and optimization, routing multiple signal nets, manufacturability, physical synthesis, special nets, and designing for specialized technologies. It includes a personal perspective from Ralph Otten as he looks back on the major technical milestones in the history of physical design automation. Although several books on this topic are currently available, most are either too broad or out of date. Alternatively, proceedings and journal articles are valuable resources for researchers in this area, but the material is widely dispersed in the literature. This handbook pulls together a broad variety of perspectives on the most challenging problems in the field, and focuses on emerging problems and research results.
Download or read book Electronic Design Automation for IC Implementation Circuit Design and Process Technology written by Luciano Lavagno and published by CRC Press. This book was released on 2017-02-03 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second of two volumes in the Electronic Design Automation for Integrated Circuits Handbook, Second Edition, Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology thoroughly examines real-time logic (RTL) to GDSII (a file format used to transfer data of semiconductor physical layout) design flow, analog/mixed signal design, physical verification, and technology computer-aided design (TCAD). Chapters contributed by leading experts authoritatively discuss design for manufacturability (DFM) at the nanoscale, power supply network design and analysis, design modeling, and much more. New to This Edition: Major updates appearing in the initial phases of the design flow, where the level of abstraction keeps rising to support more functionality with lower non-recurring engineering (NRE) costs Significant revisions reflected in the final phases of the design flow, where the complexity due to smaller and smaller geometries is compounded by the slow progress of shorter wavelength lithography New coverage of cutting-edge applications and approaches realized in the decade since publication of the previous edition—these are illustrated by new chapters on 3D circuit integration and clock design Offering improved depth and modernity, Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology provides a valuable, state-of-the-art reference for electronic design automation (EDA) students, researchers, and professionals.
Download or read book China Semiconductor Technology International Conference 2010 CSTIC 2010 written by Han-Ming Wu and published by The Electrochemical Society. This book was released on 2010-03 with total page 1203 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our mission is to provide a forum for world experts to discuss technologies, address the growing needs associated with silicon technology, and exchange their discoveries and solutions for current issues of high interest. We encourage collaboration, open discussion, and critical reviews at this conference. Furthermore, we hope that this conference will also provide collaborative opportunities for those who are interested in the semiconductor industry in Asia, particularly in China.
Download or read book Design for Manufacturability and Yield for Nano Scale CMOS written by Charles Chiang and published by Springer Science & Business Media. This book was released on 2007-06-15 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book walks the reader through all the aspects of manufacturability and yield in a nano-CMOS process. It covers all CAD/CAE aspects of a SOC design flow and addresses a new topic (DFM/DFY) critical at 90 nm and beyond. This book is a must read book the serious practicing IC designer and an excellent primer for any graduate student intent on having a career in IC design or in EDA tool development.
Download or read book Machine Learning in VLSI Computer Aided Design written by Ibrahim (Abe) M. Elfadel and published by Springer. This book was released on 2019-03-15 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with an up-to-date account of the use of machine learning frameworks, methodologies, algorithms and techniques in the context of computer-aided design (CAD) for very-large-scale integrated circuits (VLSI). Coverage includes the various machine learning methods used in lithography, physical design, yield prediction, post-silicon performance analysis, reliability and failure analysis, power and thermal analysis, analog design, logic synthesis, verification, and neuromorphic design. Provides up-to-date information on machine learning in VLSI CAD for device modeling, layout verifications, yield prediction, post-silicon validation, and reliability; Discusses the use of machine learning techniques in the context of analog and digital synthesis; Demonstrates how to formulate VLSI CAD objectives as machine learning problems and provides a comprehensive treatment of their efficient solutions; Discusses the tradeoff between the cost of collecting data and prediction accuracy and provides a methodology for using prior data to reduce cost of data collection in the design, testing and validation of both analog and digital VLSI designs. From the Foreword As the semiconductor industry embraces the rising swell of cognitive systems and edge intelligence, this book could serve as a harbinger and example of the osmosis that will exist between our cognitive structures and methods, on the one hand, and the hardware architectures and technologies that will support them, on the other....As we transition from the computing era to the cognitive one, it behooves us to remember the success story of VLSI CAD and to earnestly seek the help of the invisible hand so that our future cognitive systems are used to design more powerful cognitive systems. This book is very much aligned with this on-going transition from computing to cognition, and it is with deep pleasure that I recommend it to all those who are actively engaged in this exciting transformation. Dr. Ruchir Puri, IBM Fellow, IBM Watson CTO & Chief Architect, IBM T. J. Watson Research Center
Download or read book Computational Lithography written by Xu Ma and published by John Wiley & Sons. This book was released on 2011-01-06 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Unified Summary of the Models and Optimization Methods Used in Computational Lithography Optical lithography is one of the most challenging areas of current integrated circuit manufacturing technology. The semiconductor industry is relying more on resolution enhancement techniques (RETs), since their implementation does not require significant changes in fabrication infrastructure. Computational Lithography is the first book to address the computational optimization of RETs in optical lithography, providing an in-depth discussion of optimal optical proximity correction (OPC), phase shifting mask (PSM), and off-axis illumination (OAI) RET tools that use model-based mathematical optimization approaches. The book starts with an introduction to optical lithography systems, electric magnetic field principles, and the fundamentals of optimization from a mathematical point of view. It goes on to describe in detail different types of optimization algorithms to implement RETs. Most of the algorithms developed are based on the application of the OPC, PSM, and OAI approaches and their combinations. Algorithms for coherent illumination as well as partially coherent illumination systems are described, and numerous simulations are offered to illustrate the effectiveness of the algorithms. In addition, mathematical derivations of all optimization frameworks are presented. The accompanying MATLAB® software files for all the RET methods described in the book make it easy for readers to run and investigate the codes in order to understand and apply the optimization algorithms, as well as to design a set of optimal lithography masks. The codes may also be used by readers for their research and development activities in their academic or industrial organizations. An accompanying MATLAB® software guide is also included. An accompanying MATLAB® software guide is included, and readers can download the software to use with the guide at ftp://ftp.wiley.com/public/sci_tech_med/computational_lithography. Tailored for both entry-level and experienced readers, Computational Lithography is meant for faculty, graduate students, and researchers, as well as scientists and engineers in industrial organizations whose research or career field is semiconductor IC fabrication, optical lithography, and RETs. Computational lithography draws from the rich theory of inverse problems, optics, optimization, and computational imaging; as such, the book is also directed to researchers and practitioners in these fields.
Download or read book Extending Moore s Law through Advanced Semiconductor Design and Processing Techniques written by Wynand Lambrechts and published by CRC Press. This book was released on 2018-09-13 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a methodological understanding of the theoretical and technical limitations to the longevity of Moore’s law. The book presents research on factors that have significant impact on the future of Moore’s law and those factors believed to sustain the trend of the last five decades. Research findings show that boundaries of Moore’s law primarily include physical restrictions of scaling electronic components to levels beyond that of ordinary manufacturing principles and approaching the bounds of physics. The research presented in this book provides essential background and knowledge to grasp the following principles: Traditional and modern photolithography, the primary limiting factor of Moore’s law Innovations in semiconductor manufacturing that makes current generation CMOS processing possible Multi-disciplinary technologies that could drive Moore's law forward significantly Design principles for microelectronic circuits and components that take advantage of technology miniaturization The semiconductor industry economic market trends and technical driving factors The complexity and cost associated with technology scaling have compelled researchers in the disciplines of engineering and physics to optimize previous generation nodes to improve system-on-chip performance. This is especially relevant to participate in the increased attractiveness of the Internet of Things (IoT). This book additionally provides scholarly and practical examples of principles in microelectronic circuit design and layout to mitigate technology limits of previous generation nodes. Readers are encouraged to intellectually apply the knowledge derived from this book to further research and innovation in prolonging Moore’s law and associated principles.
Download or read book Machine Learning Applications in Electronic Design Automation written by Haoxing Ren and published by Springer Nature. This book was released on 2023-01-01 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a single-source reference to key machine learning (ML) applications and methods in digital and analog design and verification. Experts from academia and industry cover a wide range of the latest research on ML applications in electronic design automation (EDA), including analysis and optimization of digital design, analysis and optimization of analog design, as well as functional verification, FPGA and system level designs, design for manufacturing (DFM), and design space exploration. The authors also cover key ML methods such as classical ML, deep learning models such as convolutional neural networks (CNNs), graph neural networks (GNNs), generative adversarial networks (GANs) and optimization methods such as reinforcement learning (RL) and Bayesian optimization (BO). All of these topics are valuable to chip designers and EDA developers and researchers working in digital and analog designs and verification.
Download or read book Manufacturability Aware Routing in Nanometer VLSI written by David Z. Pan and published by Now Publishers Inc. This book was released on 2010-05-04 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper surveys key research challenges and recent results of manufacturability aware routing in nanometer VLSI designs. The manufacturing challenges have their root causes from various integrated circuit (IC) manufacturing processes and steps, e.g., deep sub-wavelength lithography, random defects, via voids, chemical-mechanical polishing, and antenna-effects. They may result in both functional and parametric yield losses. The manufacturability aware routing can be performed at different routing stages including global routing, track routing, and detail routing, guided by both manufacturing process models and manufacturing-friendly rules. The manufacturability/yield optimization can be performed through both correct-by-construction (i.e., optimization during routing) as well as construct-by-correction (i.e., post-routing optimization). This paper will provide a holistic view of key design for manufacturability issues in nanometer VLSI routing.
Download or read book Nanoscale Devices written by Brajesh Kumar Kaushik and published by CRC Press. This book was released on 2018-11-16 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary aim of this book is to discuss various aspects of nanoscale device design and their applications including transport mechanism, modeling, and circuit applications. . Provides a platform for modeling and analysis of state-of-the-art devices in nanoscale regime, reviews issues related to optimizing the sub-nanometer device performance and addresses simulation aspect and/or fabrication process of devices Also, includes design problems at the end of each chapter
Download or read book Recent Topics on Modeling of Semiconductor Processes Devices and Circuits written by Rasit Onur Topaloglu and published by Bentham Science Publishers. This book was released on 2011-09-09 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The last couple of years have been very busy for the semiconductor industry and researchers. The rapid speed of production channel length reduction has brought lithographic challenges to semiconductor modeling. These include stress optimization, transisto"
Download or read book Optical Microlithography written by and published by . This book was released on 2007 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Istc cstic 2009 cistc written by David Huang and published by The Electrochemical Society. This book was released on 2009-03 with total page 1124 pages. Available in PDF, EPUB and Kindle. Book excerpt: ISTC/CSTIC is an annual semiconductor technology conference covering all the aspects of semiconductor technology and manufacturing, including devices, design, lithography, integration, materials, processes, manufacturing as well as emerging semiconductor technologies and silicon material applications. ISTC/CSTIC 2009 was merged by ISTC (International Semiconductor Technology Conference) and CSTIC (China Semiconductor Technology International Conference), the two industry leading technical conferences in China, and consisted of one plenary session and nine technical symposia. This issue of ECS Transactions contains 159 papers from the conference.
Download or read book Fast Simulation Methods for Non planar Phase and Multilayer Defects in DUV and EUV Photomasks for Lithography written by Michael Christopher Lam and published by . This book was released on 2005 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Linking TCAD and EDA Through Pattern Matching written by Frank Edward Gennari and published by . This book was released on 2004 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:
