Download or read book Fascination Multicopter written by Roland Büchi and published by Verlag für Technik und Handwerk. This book was released on with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: The model-making sector of multicopters is very young. It started at the beginning of the new millennium with commercial products for flying camera inspections. Hobby users were able to fly their first systems in 2005, when the first toy companies launched relatively inexpensive toys with four propellers arranged horizontally. It was not until today's microprocessor technology, which can evaluate sensors for position stabilisation and change the speeds of the motors accordingly, that this fascinating subject became accessible for model building. This book is intended to help understand the functional principle, the motors, sensors, and control systems used and, on the other hand, to give an overview of what can be done today with this technology. Compared to the previous book, much new and updated information has been added and the ready-made systems that can be bought today are also discussed. From the content: • How it works • Components of a quadrocopter • Some flight mechanics • Adjusting the controls • GPS, photo, and film flight • Design of motors and propellers • Tri-, Hexa-, Octocopter, general Multicopter • Semi-scale models, Depron superstructures • Commissioning, flight school • Sources of error and first flight • Literature

Download or read book Fascination Quadcopter written by Roland Büchi and published by BoD – Books on Demand. This book was released on 2016-01-12 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt: For quadcopters there are many names. They are also called quadrocopter, quadricopter, drone, multicopter or simply 'UFO'. This type of model construction is very young. It began early in the new millennium with commercial products for flying camera inspections. One sees quadcopters in all sizes and price ranges on the market. They start with the toy quadcopters, which are small and, despite their low price, often surprisingly robust. In this model division, a similar trend can be observed as with helicopter and airplane models. The smaller and cheaper systems are often built as ‘ready to fly’, while larger systems are often available as kits. Contents: - Functionality - Ready to fly quadcopters - Components - GPS, photo and film flight - Flight mechanics - Setting the controller - Dimensioning of motors and propellers - Special shapes, tri-, hexa- and octocopters - Initial operation, sources of errors and flight

Download or read book The Big Book of Drones written by Roland Büchi and published by Verlag für Technik und Handwerk. This book was released on with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drones – or more precisely multicopters – have opened a whole new way of model making. Highly developed control electronics, powerful electric motors and high-performance batteries make things possible that were still science fiction until recently. At the same time, completely new applications have emerged: Photo and film flights, automated flights and action-packed FPV races make these models interesting for technology enthusiasts. Roland Büchi – a drone expert from the very beginning – provides all the information you need in this book if you want to get involved with multicopters. He offers beginners the information they need for a successful start and advanced pilots the basics for special missions. In short: Anyone who wants to fly drones successfully need this book! From the content: • Development history of quadrocopters and drones • Control functions and technical background • Sensors and GPS • GPS system • Automated flight, flying from waypoints • Photo and film flight, telemetry and FPV • First Person View, FPV • FPV Race • Remote control and intelligent operation • Applications and legal issues • Some flight mechanics and control technology • Design of the propulsion system • Design and construction of multicopters • First flight and flight school

Download or read book DIY Drone and Quadcopter Projects written by The Editors of Make: and published by Maker Media, Inc.. This book was released on 2016-04-22 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drones, quadcopters, Uncrewed Aerial Vehicles (UAVs): whatever they're called, remotely-controlled aircraft have changed the way we see the world, the way we manage crops, the way we sell real estate, and the way we make war. This book contains tutorials about how to understand what drones can do, and projects about how to make your own flying craft, from some of the earliest practitioners in the field.

Download or read book Industrial System Engineering for Drones written by Neeraj Kumar Singh and published by Apress. This book was released on 2019-07-15 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore a complex mechanical system where electronics and mechanical engineers work together as a cross-functional team. Using a working example, this book is a practical “how to” guide to designing a drone system. As system design becomes more and more complicated, systematic, and organized, there is an increasingly large gap in how system design happens in the industry versus what is taught in academia. While the system design basics and fundamentals mostly remain the same, the process, flow, considerations, and tools applied in industry are far different than that in academia. Designing Drone Systems takes you through the entire flow from system conception to design to production, bridging the knowledge gap between academia and the industry as you build your own drone systems. What You’ll LearnGain a high level understanding of drone systems Design a drone systems and elaborating the various aspects and considerations of design Review the principles of the industrial system design process/flow, and the guidelines for drone systems Look at the challenges, limitations, best practices, and patterns of system design Who This Book Is For Primarily for beginning or aspiring system design experts, recent graduates, and system design engineers. Teachers, trainers, and system design mentors can also benefit from this content.

Download or read book Multicopter Design and Control Practice written by Quan Quan and published by Springer Nature. This book was released on 2020-04-17 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the sister book to “Introduction to Multicopter Design and Control,” published by Springer in 2017, this book focuses on using a practical process to help readers to deepen their understanding of multicopter design and control. Novel tools with tutorials on multicopters are presented, which can help readers move from theory to practice. Experiments presented in this book employ: (1) The most widely-used flight platform – multicopters – as a flight platform; (2) The most widely-used flight pilot hardware – Pixhawk – as a control platform; and (3) One of the most widely-used programming languages in the field of control engi-neering – MATLAB + Simulink – as a programming language. Based on the current advanced development concept Model-Based Design (MBD)process, the three aspects mentioned above are closely linked. Each experiment is implemented in MATLAB and Simulink, and the numerical simula-tion test is carried out on a built simulation platform. Readers can upload the controller to the Pixhawk autopilot using automatic code generation technology and form a closed loop with a given real-time simulator for Hardware-In-the-Loop (HIL) testing. After that, the actual flight with the Pixhawk autopilot can be performed. This is by far the most complete and clear guide to modern drone fundamentals I’ve seen.It covers every element of these advanced aerial robots and walks through examples and tutorials based on the industry’s leading open-source software and tools. Read this book, and you’ll be well prepared to work at the leading edge of this exciting new industry. Chris Anderson, CEO 3DR and Chairman, the Linux Foundation’s Dronecode Project The development of a multicopter and its applications is very challenging in the robotics area due to the multidomain knowledge involved. This book systematically addresses the design, simulation and implementation of multicopters with the industrial leading workflow – Model-Based Design, commonly used in the automotive and aero-defense industries. With this book, researchers and engineers can seamlessly apply the concepts, workflows, and tools in other engineering areas, especially robot design and robotics ap-plication development. Dr. Yanliang Zhang, Founder of Weston Robot, EX-product Manager of Robotics System Toolbox at the MathWorks

Download or read book Build a Drone written by Barry Davies and published by Simon and Schuster. This book was released on 2016-11-22 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within the last couple of years, the usage of drones in both the public and private (military) sector has exploded. People are talking about drones, building drones, and something most people didn’t know of a few years ago is now a household name. Build a Drone will not only teach you how to build your very own drone, but will explain their history in the military and the impact they will have—and are starting to have—on our everyday lives. Author Barry Davies has built drones for DARPA (Defense Advanced Research Projects Agency) and AAI (one of America’s largest drone manufacturers), as well as six experimental ones for MIT. He not only understands their use in the world, but knows the ins-and-outs of how they can be created and handled. Explained in simple terms with full-color step-by-step directions, Davies will explain how to build your very own drone from ones created specifically for this book. Whether you plan on using drones for recreation or a more serious purpose (from search and rescue through farming to scanning construction work on a high-rise apartment buildings), Build a Drone will make sure that you not only understand how to construct a drone, but the proper and safe ways to maintain and handle them.

Download or read book Brushless Motors and Controllers written by Roland Büchi and published by BoD – Books on Demand. This book was released on 2012 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, brushless DC motors and controllers have begun an unparalleled triumph in model construction and in all technical fields. This book is intended to show how a brushless motor works. The basic principle is discussed first, before all the key terms such as kV and rpm/V, operating voltage, load and idle current, torque, turns, electrical and mechanical power, losses, efficiency, etc. are explained. A brushless motor can't work without a brushless controller, it requires a three-phase AC voltage. To increase the speed properly, the controller must have information on the rotor position. This can be done by Hall sensors or directly via the motor windings. All that will be taken into account in the book.

Download or read book Computer Gaming World written by and published by . This book was released on 1994 with total page 1252 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Drones For Dummies written by Mark LaFay and published by John Wiley & Sons. This book was released on 2015-06-19 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fast and easy way to pick out, set up, and learn to fly your drone Ready to soar into the world of unmanned aircraft? Drones For Dummies introduces you to the fascinating world of UAVs. Written in plain English and brimming with friendly instruction, Drones For Dummies provides you with the information you need to find and purchase the right drone for your needs, examples of ways to use a drone, and even drone etiquette and the laws and regulations governing consumer drone usage. Plus, you'll discover the basics of flight, including how to use a drone to capture photos and video. Originally designed to assist in military and special operations applications, the use of drones has expanded into the public service sector and the consumer market for people looking to have a good time flying an aircraft remotely. Drones For Dummies covers everything you need to know to have fun with your UAV, and is packed with cool ways to expand your drone's use beyond simply flying. Pick the perfect drone to suit your needs Properly set up and fly a drone Use a drone to capture images and footage with a camera Tips for maintaining your drone If you're interested in the exciting new technology of unmanned aircraft vehicles, Drones For Dummies helps you take flight.

Download or read book Nanoelectronics Circuits and Communication Systems written by Vijay Nath and published by Lecture Notes in Electrical En. This book was released on 2019-08-16 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Building Your Own Drones written by John Baichtal and published by Que Publishing. This book was released on 2015-08-25 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Absolutely no experience needed! Build your drone, step-by-step, with this full-color, hands-on guide! You’ve heard about drones. You’ve seen drones. Now, build your own—it’s a lot easier than you think! Drones are the newest frontier for the DIY/maker community, and you don’t need to be a technical expert to build one. John Baichtal, the #1 author of hardware hacking books for beginners, will teach you all the skills you need. First, Baichtal shows you the amazing drones others have built. Then, he walks you through several complete projects: quadcopters, UAVs, ROVs, and more. Not ready to start from scratch? No problem: Baichtal helps you choose from today’s best new kits. Hundreds of full-color step-by-step photos teach you every step, every skill. When you’re ready for more advanced concepts, Baichtal explains them in plain English. Discover what drones are and why they’re so exciting Explore today’s most imaginative projects, from 3D-printed mini quadcopters to floating robot armies Compare kits, from $200 up: Parallax ELEV-8, DJI Phantom 2 Vision+, OpenROV, Actobotics Nomad, Brooklyn Aerodrome Flack, and more Create your own practical Drone Builder’s Workbench Build complete rocket, blimp, waterborne, and automotive drones Construct both fully autonomous and radio-controlled drones Choose and assemble your chassis (airframe), motor, props, flight control, power system, accessories, and software Integrate Arduino to make radio-controlled drones operate autonomously Teach a drone to navigate via RFID tags Learn all the basic electronics and programming you’ll need

Download or read book Autonomous Driving written by Markus Maurer and published by Springer. This book was released on 2016-05-21 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book takes a look at fully automated, autonomous vehicles and discusses many open questions: How can autonomous vehicles be integrated into the current transportation system with diverse users and human drivers? Where do automated vehicles fall under current legal frameworks? What risks are associated with automation and how will society respond to these risks? How will the marketplace react to automated vehicles and what changes may be necessary for companies? Experts from Germany and the United States define key societal, engineering, and mobility issues related to the automation of vehicles. They discuss the decisions programmers of automated vehicles must make to enable vehicles to perceive their environment, interact with other road users, and choose actions that may have ethical consequences. The authors further identify expectations and concerns that will form the basis for individual and societal acceptance of autonomous driving. While the safety benefits of such vehicles are tremendous, the authors demonstrate that these benefits will only be achieved if vehicles have an appropriate safety concept at the heart of their design. Realizing the potential of automated vehicles to reorganize traffic and transform mobility of people and goods requires similar care in the design of vehicles and networks. By covering all of these topics, the book aims to provide a current, comprehensive, and scientifically sound treatment of the emerging field of “autonomous driving".

Download or read book Applications of Robotics in Industry Using Advanced Mechanisms written by Janmenjoy Nayak and published by Springer Nature. This book was released on 2019-09-03 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shares important findings on the application of robotics in industry using advanced mechanisms, including software and hardware. It presents a collection of recent trends and research on various advanced computing paradigms such as soft computing, robotics, smart automation, power control, and uncertainty analysis. The book constitutes the proceedings of the 1st International Conference on Application of Robotics in Industry using Advanced Mechanisms (ARIAM2019), which offered a platform for sharing original research findings, presenting innovative ideas and applications, and comparing notes on various aspects of robotics. The contributions highlight the latest research and industrial applications of robotics, and discuss approaches to improving the smooth functioning of industries. Moreover, they focus on designing solutions for complex engineering problems and designing system components or processes to meet specific needs, with due considerations for public health and safety, including cultural, societal, and environmental considerations. Taken together, they offer a valuable resource for researchers, scientists, engineers, professionals and students alike.

Download or read book Drone University written by John M. Glover and published by Droneuniversity. This book was released on 2014-10-18 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book makes it easy to design and build your own long or short range FPV autonomous drone. The book breaks down all the required and optional components into six easy to understand sub-systems; Airframe System, Radio Control / Autopilot System, Camera System, Power System, Ground Control Station, and the Drive Train System. Other chapters will provide flying tips, check lists and a many surprises in-between.

Download or read book Proceedings of the International Conference on Modern Research in Aerospace Engineering written by Sanjay Singh and published by Springer. This book was released on 2018-02-09 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes high-quality research papers presenting the latest advances in aerospace and related engineering fields. The papers are organized according to six broad areas (i) Aerospace Propulsion, (ii) Space Research, Avionics and Instrumentation, (iii) Aerodynamics Wind Tunnel and Computational fluid dynamics (CFD), (iv) Structural Analysis and Finite Element Method (FEM), (v) Materials, Manufacturing and Air Safety and (vi) Aircraft Environmental and Control System and Stability, making it easy for readers to find the information they require. Offering insights into the state of the art in aerospace engineering, the original research presented is valuable to academics, researchers, undergraduate and postgraduate students as well as professionals in industry and R&D. The clearly written book can be used for the validation of data, and the development of experimental and simulation techniques as well as other mathematical approaches.

Download or read book The Future of Business written by Rohit Talwar and published by Fast Future Publishing Ltd . This book was released on 2015-03-15 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Future of Business explores how the commercial world is being transformed by the complex interplay between social, economic and political shifts, disruptive ideas, bold strategies and breakthroughs in science and technology. Over 60 contributors from 21 countries explore how the business landscape will be reshaped by factors as diverse as the modification of the human brain and body, 3D printing, alternative energy sources, the reinvention of government, new business models, artificial intelligence, blockchain technology, and the potential emergence of the Star Trek economy.