Download or read book Failure Analysis written by Marius Bazu and published by John Wiley & Sons. This book was released on 2011-03-08 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failure analysis is the preferred method to investigate product or process reliability and to ensure optimum performance of electrical components and systems. The physics-of-failure approach is the only internationally accepted solution for continuously improving the reliability of materials, devices and processes. The models have been developed from the physical and chemical phenomena that are responsible for degradation or failure of electronic components and materials and now replace popular distribution models for failure mechanisms such as Weibull or lognormal. Reliability engineers need practical orientation around the complex procedures involved in failure analysis. This guide acts as a tool for all advanced techniques, their benefits and vital aspects of their use in a reliability programme. Using twelve complex case studies, the authors explain why failure analysis should be used with electronic components, when implementation is appropriate and methods for its successful use. Inside you will find detailed coverage on: a synergistic approach to failure modes and mechanisms, along with reliability physics and the failure analysis of materials, emphasizing the vital importance of cooperation between a product development team involved the reasons why failure analysis is an important tool for improving yield and reliability by corrective actions the design stage, highlighting the ‘concurrent engineering' approach and DfR (Design for Reliability) failure analysis during fabrication, covering reliability monitoring, process monitors and package reliability reliability resting after fabrication, including reliability assessment at this stage and corrective actions a large variety of methods, such as electrical methods, thermal methods, optical methods, electron microscopy, mechanical methods, X-Ray methods, spectroscopic, acoustical, and laser methods new challenges in reliability testing, such as its use in microsystems and nanostructures This practical yet comprehensive reference is useful for manufacturers and engineers involved in the design, fabrication and testing of electronic components, devices, ICs and electronic systems, as well as for users of components in complex systems wanting to discover the roots of the reliability flaws for their products.

Download or read book Microelectronics Failure Analysis written by and published by ASM International. This book was released on 2004-01-01 with total page 813 pages. Available in PDF, EPUB and Kindle. Book excerpt: For newcomers cast into the waters to sink or swim as well as seasoned professionals who want authoritative guidance desk-side, this hefty volume updates the previous (1999) edition. It contains the work of expert contributors who rallied to the job in response to a committee's call for help (the committee was assigned to the update by the Electron

Download or read book Reliability Characterisation of Electrical and Electronic Systems written by Jonathan Swingler and published by Woodhead Publishing. This book was released on 2020-11-15 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book charts how reliability engineering has moved from the use of sometimes arbitrary standards to an empirical scientific approach of understanding operating conditions, failure mechanisms, the need for testing for a more realistic characterisation and, new for the second edition, includes the monitoring of performance/robustness in the field. Reliability Characterisation of Electrical and Electronic Systems brings together a number of experts and key players in the discipline to concisely present the fundamentals and background to reliability theory, elaborate on the current thinking and developments behind reliability characterisation, and give a detailed account of emerging issues across a wide range of applications. The second edition has a new section titled Reliability Condition Monitoring and Prognostics for Specific Application which provides a guide to critical issues in key industrial sectors such as automotive and aerospace. There are also new chapters on areas of growing importance such as reliability methods in high-temperature electronics and reliability and testing of electric aircraft power systems. Reviews emerging areas of importance such as reliability methods in high-temperature electronics and reliability testing of electric vehicles Looks at the failure mechanisms, testing methods, failure analysis, characterisation techniques and prediction models that can be used to increase reliability Facilitates a greater understanding of operating conditions, failure mechanisms and the need for testing

Download or read book Micro and Opto Electronic Materials and Structures Physics Mechanics Design Reliability Packaging written by Ephraim Suhir and published by Springer Science & Business Media. This book was released on 2007-05-26 with total page 1471 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides the most comprehensive, up-to-date and easy-to-apply information on the physics, mechanics, reliability and packaging of micro- and opto-electronic materials. It details their assemblies, structures and systems, and each chapter contains a summary of the state-of-the-art in a particular field. The book provides practical recommendations on how to apply current knowledge and technology to design and manufacture. It further describes how to operate a viable, reliable and cost-effective electronic component or photonic device, and how to make such a device into a successful commercial product.

Download or read book Failure Modes and Mechanisms in Electronic Packages written by P. Singh and published by Springer Science & Business Media. This book was released on 1997-11-30 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the proliferation of packaging technology, failure and reliability have become serious concerns. This invaluable reference details processes that enable detection, analysis and prevention of failures. It provides a comprehensive account of the failures of device packages, discrete component connectors, PCB carriers and PCB assemblies.

Download or read book Microelectronics Failure Analysis written by EDFAS Desk Reference Committee and published by ASM International. This book was released on 2011 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes bibliographical references and index.

Download or read book Reliability of Semiconductor Lasers and Optoelectronic Devices written by Robert Herrick and published by Woodhead Publishing. This book was released on 2021-03-06 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability of Semiconductor Lasers and Optoelectronic Devices simplifies complex concepts of optoelectronics reliability with approachable introductory chapters and a focus on real-world applications. This book provides a brief look at the fundamentals of laser diodes, introduces reliability qualification, and then presents real-world case studies discussing the principles of reliability and what occurs when these rules are broken. Then this book comprehensively looks at optoelectronics devices and the defects that cause premature failure in them and how to control those defects. Key materials and devices are reviewed including silicon photonics, vertical-cavity surface-emitting lasers (VCSELs), InGaN LEDs and lasers, and AlGaN LEDs, covering the majority of optoelectronic devices that we use in our everyday lives, powering the Internet, telecommunication, solid-state lighting, illuminators, and many other applications. This book features contributions from experts in industry and academia working in these areas and includes numerous practical examples and case studies.This book is suitable for new entrants to the field of optoelectronics working in R&D. - Includes case studies and numerous examples showing best practices and common mistakes affecting optoelectronics reliability written by experts working in the industry - Features the first wide-ranging and comprehensive overview of fiber optics reliability engineering, covering all elements of the practice from building a reliability laboratory, qualifying new products, to improving reliability on mature products - Provides a look at the reliability issues and failure mechanisms for silicon photonics, VCSELs, InGaN LEDs and lasers, AIGaN LEDs, and more

Download or read book Reliability and Failure of Electronic Materials and Devices written by Milton Ohring and published by Academic Press. This book was released on 2014-10-14 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability and Failure of Electronic Materials and Devices is a well-established and well-regarded reference work offering unique, single-source coverage of most major topics related to the performance and failure of materials used in electronic devices and electronics packaging. With a focus on statistically predicting failure and product yields, this book can help the design engineer, manufacturing engineer, and quality control engineer all better understand the common mechanisms that lead to electronics materials failures, including dielectric breakdown, hot-electron effects, and radiation damage. This new edition adds cutting-edge knowledge gained both in research labs and on the manufacturing floor, with new sections on plastics and other new packaging materials, new testing procedures, and new coverage of MEMS devices. Covers all major types of electronics materials degradation and their causes, including dielectric breakdown, hot-electron effects, electrostatic discharge, corrosion, and failure of contacts and solder joints New updated sections on "failure physics," on mass transport-induced failure in copper and low-k dielectrics, and on reliability of lead-free/reduced-lead solder connections New chapter on testing procedures, sample handling and sample selection, and experimental design Coverage of new packaging materials, including plastics and composites

Download or read book Structural Analysis in Microelectronics and Fiber Optic Systems written by and published by . This book was released on 1996 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Semiconductor Device Reliability written by A. Christou and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication is a compilation of papers presented at the Semiconductor Device Reliabi lity Workshop sponsored by the NATO International Scientific Exchange Program. The Workshop was held in Crete, Greece from June 4 to June 9, 1989. The objective of the Workshop was to review and to further explore advances in the field of semiconductor reliability through invited paper presentations and discussions. The technical emphasis was on quality assurance and reliability of optoelectronic and high speed semiconductor devices. The primary support for the meeting was provided by the Scientific Affairs Division of NATO. We are indebted to NATO for their support and to Dr. Craig Sinclair, who admin isters this program. The chapters of this book follow the format and order of the sessions of the meeting. Thirty-six papers were presented and discussed during the five-day Workshop. In addi tion, two panel sessions were held, with audience participation, where the particularly controversial topics of bum-in and reliability modeling and prediction methods were dis cussed. A brief review of these sessions is presented in this book.

Download or read book Structural Analysis in Microelectronics and Fiber Optics 1996 written by Ephraim Suhir and published by . This book was released on 1996 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the November 1996 symposium. Contains 18 papers arranged in sections on structural reliability and dynamics, structural analysis of IC packages, solder alloys and joints, and fiber-optic and optoelectronic structures. Specific topics include singular solutions of interfacial stresses

Download or read book Extreme Environment Electronics written by John D. Cressler and published by CRC Press. This book was released on 2017-12-19 with total page 1041 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unfriendly to conventional electronic devices, circuits, and systems, extreme environments represent a serious challenge to designers and mission architects. The first truly comprehensive guide to this specialized field, Extreme Environment Electronics explains the essential aspects of designing and using devices, circuits, and electronic systems intended to operate in extreme environments, including across wide temperature ranges and in radiation-intense scenarios such as space. The Definitive Guide to Extreme Environment Electronics Featuring contributions by some of the world’s foremost experts in extreme environment electronics, the book provides in-depth information on a wide array of topics. It begins by describing the extreme conditions and then delves into a description of suitable semiconductor technologies and the modeling of devices within those technologies. It also discusses reliability issues and failure mechanisms that readers need to be aware of, as well as best practices for the design of these electronics. Continuing beyond just the "paper design" of building blocks, the book rounds out coverage of the design realization process with verification techniques and chapters on electronic packaging for extreme environments. The final set of chapters describes actual chip-level designs for applications in energy and space exploration. Requiring only a basic background in electronics, the book combines theoretical and practical aspects in each self-contained chapter. Appendices supply additional background material. With its broad coverage and depth, and the expertise of the contributing authors, this is an invaluable reference for engineers, scientists, and technical managers, as well as researchers and graduate students. A hands-on resource, it explores what is required to successfully operate electronics in the most demanding conditions.

Download or read book Microelectronics Fialure Analysis Desk Reference Seventh Edition written by Tejinder Gandhi and published by ASM International. This book was released on 2019-11-01 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Electronic Device Failure Analysis Society proudly announces the Seventh Edition of the Microelectronics Failure Analysis Desk Reference, published by ASM International. The new edition will help engineers improve their ability to verify, isolate, uncover, and identify the root cause of failures. Prepared by a team of experts, this updated reference offers the latest information on advanced failure analysis tools and techniques, illustrated with numerous real-life examples. This book is geared to practicing engineers and for studies in the major area of power plant engineering. For non-metallurgists, a chapter has been devoted to the basics of material science, metallurgy of steels, heat treatment, and structure-property correlation. A chapter on materials for boiler tubes covers composition and application of different grades of steels and high temperature alloys currently in use as boiler tubes and future materials to be used in supercritical, ultra-supercritical and advanced ultra-supercritical thermal power plants. A comprehensive discussion on different mechanisms of boiler tube failure is the heart of the book. Additional chapters detailing the role of advanced material characterization techniques in failure investigation and the role of water chemistry in tube failures are key contributions to the book.

Download or read book IEEE International Reliability Physics Symposium Proceedings written by International Reliability Physics Symposium and published by . This book was released on 2004 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1997 with total page 2304 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Focus on Semiconductor Research written by Thomas B. Elliot and published by Nova Publishers. This book was released on 2005 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes within its scope studies of the structural, electrical, optical and acoustical properties of bulk, low-dimensional and amorphous semiconductors; computational semiconductor physics; interface properties, including the physics and chemistry of heterojunctions, metal-semiconductor and insulator-semiconductor junctions; all multi-layered structures involving semiconductor components. Dopant incorporation. Growth and preparation of materials, including both epitaxial (e.g. molecular beam and chemical vapour methods) and bulk techniques; in situ monitoring of epitaxial growth processes, also included are appropriate aspects of surface science such as the influence of growth kinetics and chemical processing on layer and device properties. The physics of semiconductor electronic and optoelectronic devices are examined , including theoretical modelling and experimental demonstration; all aspects of the technology of semiconductor device and circuit fabrication. Relevant areas of 'molecular electronics' and semiconductor structures incorporating Langmuir- Blodgett films; resists, lithography and metallisation where they are concerned with the definition of small geometry structure. The structural, electrical and optical characterisation of materials and device structures are also included. The scope encompasses materials and device reliability: reliability evaluation of technologies; failure analysis and advanced analysis techniques such as SEM, E-beam, optical emission microscopy, acoustic microscopy techniques; liquid crystal techniques; noise measurement, reliability prediction and simulation; reliability indicators; failure mechanisms, including charge migration, trapping, oxide breakdown, hot carrier effects, electro-migration, stress migration; package- related failure mechanisms; effects of operational and environmental stresses on reliability.

Download or read book Vibration Analysis for Electronic Equipment written by Dave S. Steinberg and published by Wiley-Interscience. This book was released on 2000-07-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the analysis of various types of vibration environments that can lead to the failure of electronic systems or components.