Download or read book Failure Mechanics in Advanced Polymeric Composites written by George A. Kardomateas and published by . This book was released on 1994 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Failure Mechanics in Advanced Polymeric Composites written by George A. Kardomateas and published by . This book was released on 1994 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fracture Failure Analysis of Fiber Reinforced Polymer Matrix Composites written by Sanjay Mavinkere Rangappa and published by Springer Nature. This book was released on 2021-04-19 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a unified approach to fracture behavior of natural and synthetic fiber-reinforced polymer composites on the basis of fiber orientation, the addition of fillers, characterization, properties and applications. In addition, the book contains an extensive survey of recent improvements in the research and development of fracture analysis of FRP composites that are used to make higher fracture toughness composites in various applications.The FRP composites are an emerging area in polymer science with many structural applications. The rise in materials failure by fracture has forced scientists and researchers to develop new higher strength materials for obtaining higher fracture toughness. Therefore, further knowledge and insight into the different modes of fracture behavior of FRP composites are critical to expanding the range of their application.
Download or read book Failure Mechanisms in Polymer Matrix Composites written by Paul Robinson and published by Elsevier. This book was released on 2012-01-19 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer matrix composites are increasingly replacing traditional materials, such as metals, for applications in the aerospace, automotive and marine industries. Because of the relatively recent development of these composites there is extensive on-going research to improve the understanding and modelling of their behaviour – particularly their failure processes. As a consequence there is a strong demand among design engineers for the latest information on this behaviour in order to fully exploit the potential of these materials for a wide range of weight-sensitive applications. Failure mechanisms in polymer matrix composites explores the main types of composite failure and examines their implications in specific applications.Part one discusses various failure mechanisms, including a consideration of manufacturing defects and addressing a variety of loading forms such as impact and the implications for structural integrity. This part also reviews testing techniques and modelling methods for predicting potential failure in composites. Part two investigates the effects of polymer-matrix composite failure in a range of industries including aerospace, automotive and other transport, defence, marine and off-shore applications. Recycling issues and environmental factors affecting the use of composite materials are also considered.With its distinguished editors and international team of expert contributors Failure mechanisms in polymer matrix composites is a valuable reference for designers, scientists and research and development managers working in the increasing range of industries in which composite materials are extensively used. The book will also be a useful guide for academics studying in the composites field. - Discusses various failure mechanisms, including manufacturing defects - Reviews testing techniques and modelling methods for predicting potential failure - Investigates failure in aerospace, automotive, defence, marine and off-shore applications
Download or read book Failure of Fibre Reinforced Polymer Composites written by Mohamed Thariq Hameed Sultan and published by CRC Press. This book was released on 2021-12-14 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proposed book focusses on the theme of failure of polymer composites, focusing on vital aspects of enhancing failure resistance, constituents and repair including associated complexities. It discusses characterization and experimentation of the composites under loading with respect to the specific environment and applications. Further, it includes topics as green composites, advanced materials and composite joint failure, buckling failure, and fiber-metal composite failure. It explains preparation, applications of composites for weight sensitive applications, leading to potential applications and formulations, fabrication of polymer products based on bio-resources. Provides exhaustive understanding of failure and fatigue of polymer composites Covers the failure of fiber reinforced polymer composites, composite joint failure, fiber-metal composite, and laminate failure Discusses how to enhance the resistance against failure of the polymer composites Provides input to industry related and academic orientated research problems Represents an organized perspective and analysis of materials processing, material design, and their failure under loading This book is aimed at researchers, graduate students in composites, fiber reinforcement, failure mechanism, materials science, and mechanical engineering.
Download or read book Numerical Modelling of Failure in Advanced Composite Materials written by Pedro P. Camanho and published by Woodhead Publishing. This book was released on 2015-08-07 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Modelling of Failure in Advanced Composite Materials comprehensively examines the most recent analysis techniques for advanced composite materials. Advanced composite materials are becoming increasingly important for lightweight design in aerospace, wind energy, and mechanical and civil engineering. Essential for exploiting their potential is the ability to reliably predict their mechanical behaviour, particularly the onset and propagation of failure. Part One investigates numerical modeling approaches to interlaminar failure in advanced composite materials. Part Two considers numerical modelling approaches to intralaminar failure. Part Three presents new and emerging advanced numerical algorithms for modeling and simulation of failure. Part Four closes by examining the various engineering and scientific applications of numerical modeling for analysis of failure in advanced composite materials, such as prediction of impact damage, failure in textile composites, and fracture behavior in through-thickness reinforced laminates. - Examines the most recent analysis models for advanced composite materials in a coherent and comprehensive manner - Investigates numerical modelling approaches to interlaminar failure and intralaminar failure in advanced composite materials - Reviews advanced numerical algorithms for modeling and simulation of failure - Examines various engineering and scientific applications of numerical modelling for analysis of failure in advanced composite materials
Download or read book Failure Analysis and Fractography of Polymer Composites written by Emile Greenhalgh and published by Elsevier. This book was released on 2009-09-28 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growing use of polymer composites is leading to increasing demand for fractographic expertise. Fractography is the study of fracture surface morphologies and it gives an insight into damage and failure mechanisms, underpinning the development of physically-based failure criteria. In composites research it provides a crucial link between predictive models and experimental observations. Finally, it is vital for post-mortem analysis of failed or crashed polymer composite components, the findings of which can be used to optimise future designs.Failure analysis and fractography of polymer composites covers the following topics: methodology and tools for failure analysis; fibre-dominated failures; delamination-dominated failures; fatigue failures; the influence of fibre architecture on failure; types of defect and damage; case studies of failures due to overload and design deficiencies; case studies of failures due to material and manufacturing defects; and case studies of failures due to in-service factors.With its distinguished author, Failure analysis and fractography of polymer composites is a standard reference text for researchers working on damage and failure mechanisms in composites, engineers characterising manufacturing and in-service defects in composite structures, and investigators undertaking post-mortem failure analysis of components. The book is aimed at both academic and industrial users, specifically final year and postgraduate engineering and materials students researching composites and industry designers and engineers in aerospace, civil, marine, power and transport applications. - Examines the study of fracture surface morphologies in uderstanding composite structural behaviour - Discusses composites research and post-modern analysis of failed or crashed polymer composite components - Provides an overview of damage mechanisms, types of defect and failure criteria
Download or read book Advanced Polymer Composites and Polymers in the Civil Infrastructure written by L.C. Hollaway and published by Elsevier. This book was released on 2001-07-12 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, the fabrication technologies for the production of advanced polymer composites have been revolutionised by sophisticated manufacturing techniques. These methods have enabled polymer composite materials to produce good quality laminates with minimal voids and accurate fibre alignment. This book familiarises and provides a background to the understanding and use of advanced polymer composites in the civil infrastructure; numerous examples have been provided to illustrate the use and versatility of the material. Furthermore, the book discusses the current fabrication techniques, design methods and formulae for the design of structural composite systems. In addition it discusses the fundamentals of geosynthetics used in geotechnical engineering. The book introduces the fibres and matrices that are used to manufacture composites, their mechanical and in-service properties and their long term loading characteristics; all these properties are specifically associated with the construction industry. The chapters then discuss the design aspects for 'all composite' units, as well as systems used for the renewal of civil infrastructure. Finally, the book demonstrated the unique possibilities of combining composites with conventional materials to form units in which the various materials making up the unit are loaded in the mode that specifically suits their mechanical characteristics.
Download or read book Failure of Fibre Reinforced Polymer Composites written by K. Jayakrishna and published by CRC Press. This book was released on 2024-10-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proposed book focusses on failure of polymer composites, ways to enhance failure resistance, constituents and repair including associated complexities. It discusses characterization and experimentation of the composites under loading and topics as green composites, advanced materials and composite joint failure, buckling failure and so forth.
Download or read book Going to Extremes written by National Research Council and published by National Academies Press. This book was released on 2005-10-22 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced polymer matrix composites (PMC) have many advantages such as light weight and high specific strength that make them useful for many aerospace applications. Enormous uncertainty exists, however, in predicting long-term changes in properties of PMCs under extreme environmental conditions, which has limited their use. To help address this issue, the Department of Defense requested a study from the NRC to identify the barriers and limitations to the use of PMCs in extreme environments. The study was to focus on issues surrounding methodologies for predicting long-term performance. This report provides a review of the challenges facing application of PMCs in extreme environments, the current understanding of PMC properties and behavior, an analysis of the importance of data in developing effective models, and recommendations for improving long-term predictive methodologies.
Download or read book Repair of Advanced Composites for Aerospace Applications written by Mohamed Thariq Hameed Sultan and published by CRC Press. This book was released on 2022-03-22 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the repair of polymer composites for critical components in aerospace industries. It also covers the complexities of failure and repair of composites, types of fiber reinforcement and bonding. It includes special topics on damage assessment using on-site inspection (NDT and THz techniques) and automated repair processes for reliability and repeatability. Repair of Advanced Composites for Aerospace Applications also describes the characterization, modelling and simulation of the composites' damage mechanisms with respect to specific environments and applications. Failures associated with various composite repairing techniques for aerospace applications are also covered. Key Features: • Addresses the composites development process including damage detection and repair for aerospace applications. • Covers research on the multi-scale process modelling, material modelling, self-healing, repairing and their analyses. • Concentrates on the repair of composites for weight-sensitive applications in automobiles and aerospace. • Analyses perspectives on materials processing and material design. • Details composite joints, their failure, and operations of aircraft component in various environments. This book is aimed at researchers, professionals and graduate students in composite materials, manufacturing, aerospace engineering, advanced materials design and manufacturing, composite materials repair, and hybrid materials repair.
Download or read book Failure Analysis in Biocomposites Fibre Reinforced Composites and Hybrid Composites written by Mohammad Jawaid and published by Woodhead Publishing. This book was released on 2018-09-17 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failure Analysis in Biocomposites, Fibre-Reinforced Composites and Hybrid Composites covers key aspects of fracture and failure in natural/synthetic fiber reinforced polymer based composite materials, ranging from crack propagation, to crack growth, and from notch-size effect, to damage-tolerant design. The book describes a broad range of techniques and strategies for the compositional and failure analysis of polymeric materials and products. It also illustrates the application of analytical methods for solving commonly encountered problems. Topics of interest include failure analysis, mechanical and physical properties, structural health monitoring, durability and life prediction, modelling of damage processes of natural fiber, synthetic fibers, and more. Written by leading experts in the field, and covering composite materials developed from different natural fibers and their hybridization with synthetic fibers, the book's chapters provide cutting-edge, up-to-date research on the characterization, analysis and modelling of composite materials. - Contains contributions from leading experts in the field - Discusses recent progress on failure analysis, SHM, durability, life prediction and the modelling of damage in natural fiber-based composite materials - Covers experimental, analytical and numerical analysis - Provides detailed and comprehensive information on mechanical properties, testing methods and modelling techniques
Download or read book Advanced Polymeric Materials written by Gabriel O. Shonaike and published by CRC Press. This book was released on 2003-04-14 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring contributions from experts at some of the world's leading academic and industrial institutions, Advanced Polymeric Materials: Structure Property Relationships brings into book form a wealth of information previously available primarily only within computer programs. In a welcome narrative treatment, it provides comprehensive coverage of p
Download or read book Advanced Topics in Characterization of Composites written by Michael R. Kessler and published by Trafford Publishing. This book was released on 2004 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Topics in Characterization of Composites is a product of the ''Characterization of Composite Materials" graduate course in the Department of Mechanical Engineering at The University of Tulsa. It contains a series of chapters describing characterization techniques for polymer-matrix composite materials. Topics covered include: -thermal analysis using DSC, -residual stresses, -single-fiber fragmentation testing, -creep and creep nature, -impact testing, -infrared thermography, -air-coupled ultrasonics, -structural health monitoring, and -fractography. The chapters include comprehensive literature reviews, background information, and best practices in experimental composites evaluation.
Download or read book Mechanics of Composite and Multi functional Materials Volume 7 written by Carter Ralph and published by Springer. This book was released on 2015-11-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental Mechanics of Composite, Hybrid, and Multifunctional Materials, Volume 7 of the Proceedings of the 2015SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the seventh volume of nine from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: Multifunctional Materials Hybrid Materials Novel Composites Nano- and Particle-Reinforced Composites Additive Manufacturing of Composites Digital Imaging of Composites Damage Detection Non-Destructive Evaluation Fatigue and Fracture of Composites Manufacturing and Joining of Composites Advanced Composites Applications
Download or read book Failure Criteria in Fibre Reinforced Polymer Composites written by M. Hinton and published by Elsevier. This book was released on 2004-08-27 with total page 1269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fiber reinforced polymer composites are an extremely broad and versatile class of material.Their high strength coupled with lightweight leads to their use wherever structural efficiency is at a premium. Applications can be found in aircraft, process plants, sporting goods and military equipment. However they are heterogeneous in construction and antisotropic, which makes making strength prediction extremely difficult especially compared to that of a metal. This book brings together the results of a 12year worldwide failure exercise encompassing 19 theories in a single volume. Each contributor describes their own theory and employs it to solve 14 challenging problems. The accuracy of predictions and the performance of the theories are assessed and recommendations made on the uses of the theories in engineering design.All the necessary information is provided for the methodology to be readily employed for validating and benchmarking new theories as they emerge.Brings together 19 failure theories, with many application examples.Compares the leading failure theories with one another and with experimental dataFailure to apply these theories could result in potentially unsafe designs or over design.
Download or read book Damage and Failure of Composite Materials written by Ramesh Talreja and published by Cambridge University Press. This book was released on 2012-06-07 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together materials mechanics and modelling, this book provides a complete guide to damage mechanics of composite materials for engineers.
