Download or read book Failure Analysis of the Aircraft Landing Gear Component written by and published by . This book was released on 2000 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Design of Aircraft Landing Gear written by Robert Kyle Schmidt and published by SAE International. This book was released on 2021-02-18 with total page 1092 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aircraft landing gear and its associated systems represent a compelling design challenge: simultaneously a system, a structure, and a machine, it supports the aircraft on the ground, absorbs landing and braking energy, permits maneuvering, and retracts to minimize aircraft drag. Yet, as it is not required during flight, it also represents dead weight and significant effort must be made to minimize its total mass. The Design of Aircraft Landing Gear, written by R. Kyle Schmidt, PE (B.A.Sc. - Mechanical Engineering, M.Sc. - Safety and Aircraft Accident Investigation, Chairman of the SAE A-5 Committee on Aircraft Landing Gear), is designed to guide the reader through the key principles of landing system design and to provide additional references when available. Many problems which must be confronted have already been addressed by others in the past, but the information is not known or shared, leading to the observation that there are few new problems, but many new people. The Design of Aircraft Landing Gear is intended to share much of the existing information and provide avenues for further exploration. The design of an aircraft and its associated systems, including the landing system, involves iterative loops as the impact of each modification to a system or component is evaluated against the whole. It is rare to find that the lightest possible landing gear represents the best solution for the aircraft: the lightest landing gear may require attachment structures which don't exist and which would require significant weight and compromise on the part of the airframe structure design. With those requirements and compromises in mind,The Design of Aircraft Landing Gear starts with the study of airfield compatibility, aircraft stability on the ground, the correct choice of tires, followed by discussion of brakes, wheels, and brake control systems. Various landing gear architectures are investigated together with the details of shock absorber designs. Retraction, kinematics, and mechanisms are studied as well as possible actuation approaches. Detailed information on the various hydraulic and electric services commonly found on aircraft, and system elements such as dressings, lighting, and steering are also reviewed. Detail design points, the process of analysis, and a review of the relevant requirements and regulations round out the book content. The Design of Aircraft Landing Gear is a landmark work in the industry, and a must-read for any engineer interested in updating specific skills and students preparing for an exciting career.
Download or read book Stress Analysis of a Component of an Aircraft Landing Gear written by Seubpong Leelavanichkul and published by . This book was released on 2001 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Materials Failure Analysis with Case Studies from the Aerospace and Automotive Industries written by Abdel Salam Hamdy Makhlouf and published by Butterworth-Heinemann. This book was released on 2015-09-01 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Materials Failure Analysis: With Case Studies from the Aerospace and Automotive Industries provides a thorough understanding of the reasons materials fail in certain situations, covering important scenarios, including material defects, mechanical failure as a result of improper design, corrosion, surface fracture, and other environmental causes. The book begins with a general overview of materials failure analysis and its importance, and then logically proceeds from a discussion of the failure analysis process, types of failure analysis, and specific tools and techniques, to chapters on analysis of materials failure from various causes. Later chapters feature a selection of newer examples of failure analysis cases in such strategic industrial sectors as aerospace, oil & gas, and chemicals. Covers the most common types of materials failure, analysis, and possible solutions Provides the most up-to-date and balanced coverage of failure analysis, combining foundational knowledge, current research on the latest developments, and innovations in the field Ideal accompaniment for those interested in materials forensic investigation, failure of materials, static failure analysis, dynamic failure analysis, fatigue life prediction, rotorcraft, failure prediction, fatigue crack propagation, bevel pinion failure, gasketless flange, thermal barrier coatings Presents compelling new case studies from key industries to demonstrate concepts Highlights the role of site conditions, operating conditions at the time of failure, history of equipment and its operation, corrosion product sampling, metallurgical and electrochemical factors, and morphology of failure
Download or read book Failure Analysis of Heat Treated Steel Components written by Lauralice de Campos Franceschini Canale and published by ASM International. This book was released on 2008 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aircraft Landing Gear Design written by Norman S. Currey and published by AIAA. This book was released on 1988 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the only book available today that covers military and commercial aircraft landing gear design. It is a comprehensive text that will lead students and engineers from the initial concepts of landing gear design through final detail design. The book provides a vital link in landing gear design technology from historical practices to modern design trends, and it considers the necessary airfield interface with landing gear design. The text is backed up by calculations, specifications, references, working examples.
Download or read book Overview of Aircraft Landing Gear Shimmy Analysis Methods written by A-5 Aerospace Landing Gear Systems Committee and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Aerospace Information Report (AIR) provides an overview of the tire properties, strut properties, damper properties, and other landing gear mechanical properties that contribute to shimmy stability and are required for shimmy analysis. A variety of analysis techniques and assumptions are presented. This report provides information on the contributions of each landing gear component to shimmy stability. Landing gear shimmy design considerations, modeling assumptions, and analysis techniques are provided. The report fills a need for a document that addresses landing gear shimmy behavior and shimmy analysis broadly but concisely from the perspective of aircraft landing gear design and analysis. Other resources in the shimmy literature are more focused on specific components of shimmy modeling, such as tire modeling, or are documenting research on specific landing gears and aircraft.
Download or read book Handbook of Case Histories in Failure Analysis Volume 2 written by Khlefa Alarbe Esaklul and published by ASM International. This book was released on 1992-01-01 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents more than 120 expert failure analysis case histories from industries including automotive, aerospace, utilities, oil and gas, petrochemical, biomedical, ground transportation, off-highway vehicles, and more. Volume 2 builds on the tremendous acceptance of Volume 1 by the failure analysis community. The two volumes can also be purchased as a set for a special discounted price. Learn how others have investigated and solved failures in various industries involving a wide range of failure modes, materials, and analysis techniques.
Download or read book Advances in Aircraft Landing Gear written by Robert Kyle Schmidt and published by SAE International. This book was released on 2015-08-24 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aircraft landing gear system is relatively unique on board an aircraft—it is both structure and machine, supporting the aircraft on the ground, yet providing functions such as energy absorption during landing, retraction, steering, and braking. Advances in Aircraft Landing Gear is a collection of eleven hand-picked technical papers focusing on the significant advancements that have occurred in this field concerning numeric modeling, electric actuation, and composite materials. Additionally, papers discussing self-powered landing gear and more electrical overall aircraft architectures have been included. The content of Advances in Aircraft Landing Gear is divided into two sections: Analysis and Design Methods; and Electric Actuation, Control, and Taxi. For those looking for more information on aircraft landing gears, the SAE A-5 committee (the Aerospace Landing Gear Systems Committee), which meets twice a year, serves as a useful forum for discussion on landing gear issues and development. A current listing of documents produced and maintained by this committee appears in the appendix.
Download or read book Structural Health Monitoring Damage Detection Systems for Aerospace written by Markus G. R. Sause and published by Springer Nature. This book was released on 2021 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book presents established methods of structural health monitoring (SHM) and discusses their technological merit in the current aerospace environment. While the aerospace industry aims for weight reduction to improve fuel efficiency, reduce environmental impact, and to decrease maintenance time and operating costs, aircraft structures are often designed and built heavier than required in order to accommodate unpredictable failure. A way to overcome this approach is the use of SHM systems to detect the presence of defects. This book covers all major contemporary aerospace-relevant SHM methods, from the basics of each method to the various defect types that SHM is required to detect to discussion of signal processing developments alongside considerations of aerospace safety requirements. It will be of interest to professionals in industry and academic researchers alike, as well as engineering students. This article/publication is based upon work from COST Action CA18203 (ODIN - http://odin-cost.com/), supported by COST (European Cooperation in Science and Technology). COST (European Cooperation in Science and Technology) is a funding agency for research and innovation networks. Our Actions help connect research initiatives across Europe and enable scientists to grow their ideas by sharing them with their peers. This boosts their research, career and innovation.
Download or read book Airfield Compatibility written by Kyle Schmidt and published by SAE International. This book was released on 2022-05-27 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Landing gear provides an intriguing and compelling challenge, combining many fields of science and engineering. Designed to guide the interested reader through the fundamentals aircraft wheel, brake and brake control design system, this book presents a specific element of landing gear design in an accessible way. The author’s two volume treatise, The Design of Aircraft Landing, was the inspiration for this book. The Design of Aircraft Landing is a landmark work for the industry and utilizes over 1,000 pages to present a complete, in-depth study of each component that must considered when designing an aircraft’s landing gear. While recognizing that not everyone may need the entire treatise, Aircraft Wheels, Brakes, and Brake Controls: Key Principles for Landing Gear Design is one of three quick reference guides focusing on one key element of aircraft design and landing gear design. This volume features an overview of brakes, aircraft deceleration, brake sizing, brake design, braking accessories, wheels, brake control as well as brake issues and concerns. R. Kyle Schmidt has over 25 years’ experience across three countries and has held a variety of variety of engineering roles relating to the development of new landing gears and the sustainment of existing landing gears in service.
Download or read book A Human Error Approach to Aviation Accident Analysis written by Douglas A. Wiegmann and published by Routledge. This book was released on 2017-12-22 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: Human error is implicated in nearly all aviation accidents, yet most investigation and prevention programs are not designed around any theoretical framework of human error. Appropriate for all levels of expertise, the book provides the knowledge and tools required to conduct a human error analysis of accidents, regardless of operational setting (i.e. military, commercial, or general aviation). The book contains a complete description of the Human Factors Analysis and Classification System (HFACS), which incorporates James Reason's model of latent and active failures as a foundation. Widely disseminated among military and civilian organizations, HFACS encompasses all aspects of human error, including the conditions of operators and elements of supervisory and organizational failure. It attracts a very broad readership. Specifically, the book serves as the main textbook for a course in aviation accident investigation taught by one of the authors at the University of Illinois. This book will also be used in courses designed for military safety officers and flight surgeons in the U.S. Navy, Army and the Canadian Defense Force, who currently utilize the HFACS system during aviation accident investigations. Additionally, the book has been incorporated into the popular workshop on accident analysis and prevention provided by the authors at several professional conferences world-wide. The book is also targeted for students attending Embry-Riddle Aeronautical University which has satellite campuses throughout the world and offers a course in human factors accident investigation for many of its majors. In addition, the book will be incorporated into courses offered by Transportation Safety International and the Southern California Safety Institute. Finally, this book serves as an excellent reference guide for many safety professionals and investigators already in the field.
Download or read book New Materials for Next Generation Commercial Transports written by Committee on New Materials for Advanced Civil Aircraft and published by National Academies Press. This book was released on 1996-03-29 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major objective of this book was to identify issues related to the introduction of new materials and the effects that advanced materials will have on the durability and technical risk of future civil aircraft throughout their service life. The committee investigated the new materials and structural concepts that are likely to be incorporated into next generation commercial aircraft and the factors influencing application decisions. Based on these predictions, the committee attempted to identify the design, characterization, monitoring, and maintenance issues that are critical for the introduction of advanced materials and structural concepts into future aircraft.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Case Histories in Failure Analysis Volume 1 written by Khlefa Alarbe Esaklul and published by ASM International. This book was released on 1992-01-01 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains 115 never-before published failure analysis case studies contributed by experts from around the world. Contents: Aircraft, Electrical Equipment Fasteners, Ground Transportation, High Temperature, Miscellaneous, Non-Metallic Materials, Process Equipment, Rotating Equipment, Structures. Learn how others have solved failures in various industries such as automotive, aerospace, utilities, oil and gas, petrochemical, biomedical, ground transportation, off-highway vehicles, and more.
Download or read book LANDING GEAR SYSTEM ANALYSIS written by David Bruce Tremblay and published by . This book was released on 1970 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report utilizes a matrix format to conduct an analysis of the basic functions of the landing gear system. The interplays of components are identified and the contribution which each component makes in the completion of the function is defined. The analysis is further expanded into a detailed component analysis identifying the modes of failure and physical characteristics brought into play in the completion of each function. These observations are then collated and trends are noted. Potential improvements and needs are defind for future development methods. (Author).
Download or read book SEM TEM Fractography Handbook written by McDonnell Douglas Astronautics Company and published by . This book was released on 1975 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt:
