Download or read book Factory Planning Manual written by Michael Schenk and published by Springer Science & Business Media. This book was released on 2009-10-29 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: The central purpose of this book is to impart knowledge, skills and practical - plementation methods for the planning and operation of adaptable production - cilities and factories. It addresses planning methods and procedures for various types of production facility up to and including entire factories, and is aimed at practicing factory planners and students alike. The book provides facts and demonstrates practical processes using case studies for the purposes of illustration, so that ultimately skills can be acquired that make independent practical implementation and app- cation possible. It is based on up-to-the-minute practical experience and univ- sally applicable knowledge of the planning and technological design of adaptable production facilities (manufacturing and assembly) and factories. In comparison to existing, thematically-similar reference books, what is in- vative about this manual is that it provides the impulse for a more flexible pl- ning approach for the efficient design of adaptable production facilities using - sponsive, unconventional planning and organizational solutions. The book aims to provide a way of integrating systematic and situation-driven planning methods in a meaningful way. Situation-driven planning is becoming increasingly important to production facilities in these fast-moving times of change, in particular in terms of resource and energy efficiency. Existing technical and organizational course of action in terms of resources (both human and technical) need to be selected for the specific case at hand, and changes (to workshops, products, processes and equ- ment) need to be managed.
Download or read book Handbook Factory Planning and Design written by Hans-Peter Wiendahl and published by Springer. This book was released on 2015-04-20 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook introduces a methodical approach and pragmatic concept for the planning and design of changeable factories that act in strategic alliances to supply the ever-changing needs of the global market. In the first part, the change drivers of manufacturing enterprises and the resulting new challenges are considered in detail with focus on an appropriate change potential. The second part concerns the design of the production facilities and systems on the factory levels work place, section, building and site under functional, organisational, architectural and strategic aspects keeping in mind the environmental, health and safety aspects including corporate social responsibility. The third part is dedicated to the planning and design method that is based on a synergetic interaction of process and space. The accompanying project management of the planning and construction phase and the facility management for the effective utilization of the built premises close the book. The Authors Prof. em. Dr.-Ing. Dr. mult. h.c. Hans-Peter Wiendahl has been director for 23 years of the Institute of Factory planning and Logistics at the Leibniz University of Hannover in Germany. Prof. Dipl.-Ing. Architekt BDA Jürgen Reichardt is Professor at the Muenster school of architecture and partner of RMA Reichardt – Maas – Associate Architects in Essen Germany. Prof. Dr.-Ing. habil. Peter Nyhuis is Managing Director of the Institute of Factory Planning and Logistics at the Leibniz University of Hannover in Germany.
Download or read book Factory Planning Guide written by George B. Tims and published by . This book was released on 1950 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Planning and Scheduling in Manufacturing and Supply Chains written by Yuri Mauergauz and published by Springer. This book was released on 2016-04-25 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a guide to modern production planning methods based on new scientific achievements and various practical planning rules of thumb. Several numerical examples illustrate most of the calculation methods, while the text includes a set of programs for calculating production schedules and an example of a cloud-based enterprise resource planning (ERP) system. Despite the relatively large number of books dedicated to this topic, Advanced Planning and Scheduling is the first book of its kind to feature such a wide range of information in a single work, a fact that inspired the author to write this book and publish an English translation. This work consists of two parts, with the first part addressing the design of reference and mathematical models, bottleneck models and multi-criteria models and presenting various sample models. It describes demand-forecasting methods and also includes considerations for aggregating forecasts. Lastly, it provides reference information on methods for data stocking and sorting. The second part of the book analyzes various stock planning models and the rules of safety stock calculation, while also considering the stock traffic dynamics in supply chains. Various batch computation methods are described in detail, while production planning is considered on several levels, including supply planning for customers, master planning, and production scheduling. This book can be used as a reference and manual for current planning methods. It is aimed at production planning department managers, company information system specialists, as well as scientists and PhD students conducting research in production planning. It will also be a valuable resource for students at universities of applied sciences.
Download or read book Manufacturing Plant Layout written by Edward John Phillips and published by . This book was released on 1997 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: A step-by-step guide to planning new factories and plant rearrangements, this book describes proven analytical methods for: Calculating space requirements, Activity-pair relationships, Materials handling analysis, Generating alternative layout. This proven strategy masterfully weaves together the very best elements of layout methods for manufacturing cells, JIT, demand-flow and constraint-based flow manufacturing philosophies, in addition to traditional job shop and assembly line operations. Learn how to methodically reduce or totally rid a design of profit eroders during the plan/design of a cost efficient manufacturing layout.
Download or read book Factory Operations written by Richard Crowson and published by CRC Press. This book was released on 2005-12-21 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume two of the second edition of the comprehensive Handbook of Manufacturing Engineering illuminates the role of the manufacturing engineer as the key component of factory operation. The focus is on the planning and instruction duties that are critical to successful operations management, which fall upon the manufacturing engineer who may be unf
Download or read book Factory Planning Guide written by Lloyd G. Foster and published by . This book was released on 1949 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Management Bulletin Production Planning and Control in Office Operations written by United States. Bureau of the Budget and published by . This book was released on 1949 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manufacturing facilities written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pipeline Planning and Construction Field Manual written by E. Shashi Menon and published by Gulf Professional Publishing. This book was released on 1978-06-26 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pipeline Planning and Construction Field Manual aims to guide engineers and technicians in the processes of planning, designing, and construction of a pipeline system, as well as to provide the necessary tools for cost estimations, specifications, and field maintenance. The text includes understandable pipeline schematics, tables, and DIY checklists. This source is a collaborative work of a team of experts with over 180 years of combined experience throughout the United States and other countries in pipeline planning and construction. Comprised of 21 chapters, the book walks readers through the steps of pipeline construction and management. The comprehensive guide that this source provides enables engineers and technicians to manage routine auditing of technical work output relative to technical input and established expectations and standards, and to assess and estimate the work, including design integrity and product requirements, from its research to completion. Design, piping, civil, mechanical, petroleum, chemical, project production and project reservoir engineers, including novices and students, will find this book invaluable for their engineering practices. - Back-of-the envelope calculations - Checklists for maintenance operations - Checklists for environmental compliance - Simulations, modeling tools and equipment design - Guide for pump and pumping station placement
Download or read book Fundamentals of Game Development written by Heather Chandler and published by Jones & Bartlett Learning. This book was released on 2011-08-24 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: What is a game? -- The game industry -- Roles on the team -- Teams -- Effective communication -- Game production overview -- Game concept -- Characters, setting, and story -- Game requirements -- Game plan -- Production cycle -- Voiceover and music -- Localization -- Testing and code releasing -- Marketing and public relations.
Download or read book Enabling Manufacturing Competitiveness and Economic Sustainability written by Michael F. Zaeh and published by Springer Science & Business Media. This book was released on 2013-09-12 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 5th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2013) is "Enabling Manufacturing Competitiveness and Economic Sustainability. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems' economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability, scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. Industry challenges and future directions for research and development needed to help both practitioners and academicians are presented. About the Editor Prof. Dr.-Ing. Michael F. Zaeh, born in 1963, has been and is Professor for and Manufacturing Technology since 2002 and, together with Prof. Dr.-Ing. Gunther Reinhart, Head of the Institute for Machine Tools and Industrial Management (iwb) at the Technische Universitaet Muenchen (TUM). After studying general mechanical engineering, he was doctoral candidate under Prof. Dr.-Ing. Joachim Milberg at TUM from 1990 until 1993 and received his doctorate in 1993. From 1994 to 1995, he was department leader under Prof. Dr.-Ing. Gunther Reinhart. From 1996 to 2002, he worked for a machine tool manufacturer in several positions, most recently as a member of the extended management. Prof. Dr.-Ing. Michael F. Zaeh is an associated member of the CIRP and member of acatech, WGP and WLP. His current researches include among others Joining and Cutting Technologies like Laser Cutting and Welding as well as Friction Stir Welding, Structural Behaviour and Energy Efficiency of Machine Tools and Manufacturing Processes like Additive Manufacturing.
Download or read book Introduction to Manufacturing written by Michel Baudin and published by Taylor & Francis. This book was released on 2022-12-27 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Introduction to Manufacturing focuses students on the issues that matter to practicing industrial engineers and managers. It offers a systems perspective on designing, managing, and improving manufacturing operations. On each topic, it covers the key issues, with pointers on where to dig deeper. Unlike the many textbooks on operations management, supply chain management, and process technology, this book weaves together these threads as they interact in manufacturing. It has five parts: Getting to Know Manufacturing: Fundamental concepts of manufacturing as an economic activity, from manufacturing strategy to forecasting market demand Engineering the Factory: Physical design of factories and processes, the necessary infrastructure and technology for manufacturing Making Information Flow: The "central nervous system" that triggers and responds to events occurring in production Making Materials Flow: The logistics of manufacturing, from materials handling inside the factory via warehousing to supply chain management Enhancing Performance: Managing manufacturing performance and methods to maintain and improve it, both in times of normal operations and emergencies Supported with rich illustrations and teaching aids, Introduction to Manufacturing is essential reading for industrial engineering and management students – of all ages and backgrounds – engaged in the vital task of making the things we all use.
Download or read book Technology Guide written by Hans-Jörg Bullinger and published by Springer Science & Business Media. This book was released on 2009-05-10 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Use this technology guide to find descriptions of today’s most essential global technologies. Clearly structured and simply explained, the book’s reference format invites even the casual reader to explore the stimulating innovative ideas it contains.
Download or read book Integrative Production Technology written by Christian Brecher and published by Springer. This book was released on 2017-01-09 with total page 1128 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed volume contains the research results of the Cluster of Excellence “Integrative Production Technology for High-Wage Countries”, funded by the German Research Society (DFG). The approach to the topic is genuinely interdisciplinary, covering insights from fields such as engineering, material sciences, economics and social sciences. The book contains coherent deterministic models for integrative product creation chains as well as harmonized cybernetic models of production systems. The content is structured into five sections: Integrative Production Technology, Individualized Production, Virtual Production Systems, Integrated Technologies, Self-Optimizing Production Systems and Collaboration Productivity.The target audience primarily comprises research experts and practitioners in the field of production engineering, but the book may also be beneficial for graduate students.
Download or read book Proceedings of the 3rd Conference on Physical Modeling for Virtual Manufacturing Systems and Processes written by Jan C. Aurich and published by Springer Nature. This book was released on 2023-07-10 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an open access book reporting the results of nine years research of the International Research Training Group (IRTG) 2057, funded by the German Research Foundation (DFG). The IRTG is a joint venture between the TU Kaiserslautern, the University of California Berkeley, and University of California Davis. The book is content-driven mainly by two disciplines: engineering and computer science. Through the application of scientific knowledge and advanced computer-based methods in conjunction with physical models on a level unrealized in the past, technologies and methods are promoted, which can be used for planning and optimization of manufacturing systems and processes. As a result, fundamental understanding as well as extensive systems, tools and computational algorithms, which significantly improve the integration of advanced computational methods for solving problems of manufacturing systems and processes will be available. This open access book is of interest to any researcher dealing with process and factory planning in manufacturing, like for cutting and additive manufacturing.
Download or read book Advances in Sustainable and Competitive Manufacturing Systems written by Américo Azevedo and published by Springer Science & Business Media. This book was released on 2013-06-25 with total page 1644 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings includes the set of revised papers from the 23rd International Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2013). This conference aims to provide an international forum for the exchange of leading edge scientific knowledge and industrial experience regarding the development and integration of the various aspects of Flexible Automation and Intelligent Manufacturing Systems covering the complete life-cycle of a company’s Products and Processes. Contents will include topics such as: Product, Process and Factory Integrated Design, Manufacturing Technology and Intelligent Systems, Manufacturing Operations Management and Optimization and Manufacturing Networks and MicroFactories.
