Download or read book Factory Operations written by Richard Crowson and published by CRC Press. This book was released on 2005-12-21 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume two of the second edition of the comprehensive Handbook of Manufacturing Engineering illuminates the role of the manufacturing engineer as the key component of factory operation. The focus is on the planning and instruction duties that are critical to successful operations management, which fall upon the manufacturing engineer who may be unf
Download or read book Effects of Music on Factory Production written by and published by Stanford University Press. This book was released on with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Factory Planning Manual written by Michael Schenk and published by Springer Science & Business Media. This book was released on 2009-10-29 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: The central purpose of this book is to impart knowledge, skills and practical - plementation methods for the planning and operation of adaptable production - cilities and factories. It addresses planning methods and procedures for various types of production facility up to and including entire factories, and is aimed at practicing factory planners and students alike. The book provides facts and demonstrates practical processes using case studies for the purposes of illustration, so that ultimately skills can be acquired that make independent practical implementation and app- cation possible. It is based on up-to-the-minute practical experience and univ- sally applicable knowledge of the planning and technological design of adaptable production facilities (manufacturing and assembly) and factories. In comparison to existing, thematically-similar reference books, what is in- vative about this manual is that it provides the impulse for a more flexible pl- ning approach for the efficient design of adaptable production facilities using - sponsive, unconventional planning and organizational solutions. The book aims to provide a way of integrating systematic and situation-driven planning methods in a meaningful way. Situation-driven planning is becoming increasingly important to production facilities in these fast-moving times of change, in particular in terms of resource and energy efficiency. Existing technical and organizational course of action in terms of resources (both human and technical) need to be selected for the specific case at hand, and changes (to workshops, products, processes and equ- ment) need to be managed.
Download or read book Digital Factory for Human oriented Production Systems written by Luca Canetta and published by Springer Science & Business Media. This book was released on 2011-07-10 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital factory is a comprehensive approach providing methodologies, models and tools that support manufacturing enterprises in the rearrangement of their organizational structures to deal with expected changes in manufacturing processes and markets. Digital Factory for Human-oriented Production Systems investigates the impact of the digital factory through a consideration of the entire product/process lifecycle, and the broad network of product engineering, material and component suppliers, manufacturing equipment suppliers, and customers involved in current and next generation manufacturing. It covers the utilization and integration of: human body ergonomics models; production system discrete event simulation; 3D/virtual and augmented reality visualization; collaborative design tools; automatic data capture; and knowledge management systems based on semantic web ontologies integrated by a continuous data management. The coverage of various types of factory and manufacturing phases, representations and simulations allows researchers in academia and industry to perform a dynamic analysis and up-to-date modeling of the processes involved. Digital Factory for Human-oriented Production Systems describes the tools that allow a move towards the integrated digital factory and underlines the business impact that companies can obtain by adopting these tools. As well as benefiting international organizations, the proposed methodologies and technologies have also been developed in order to facilitate their adoption by small or medium-sized businesses, making them relevant to all product engineers and managers who want improve the efficiency and effectiveness of their enterprises.
Download or read book Fats and Oils Production Consumption and Factory and Warehouse Stocks written by United States. Bureau of the Census and published by . This book was released on 1964 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fats and oils production consumption and factory and warehouse stocks written by and published by . This book was released on 1977 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Factory written by and published by . This book was released on 1927 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vols. 24, no. 3-v. 34, no. 3 include: International industrial digest.
Download or read book Factory the Magazine of Management written by and published by . This book was released on 1925 with total page 1026 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Men s Factory made Clothing Industry written by United States. Bureau of Foreign and Domestic Commerce and published by . This book was released on 1916 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Statistical Report on the Factory and Building Production of the Dominion of New Zealand written by New Zealand. Census and Statistics Department and published by . This book was released on 1928 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Hybrid Factory in United States The Japanese Style Management and Production System in the Global Economy written by Jorge Carrillo and published by Jorge Carrillo Viveros. This book was released on with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Business written by Lawrence J. Gitman and published by . This book was released on 2024-09-16 with total page 1455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Business covers the scope and sequence of most introductory business courses. The book provides detailed explanations in the context of core themes such as customer satisfaction, ethics, entrepreneurship, global business, and managing change. Introduction to Business includes hundreds of current business examples from a range of industries and geographic locations, which feature a variety of individuals. The outcome is a balanced approach to the theory and application of business concepts, with attention to the knowledge and skills necessary for student success in this course and beyond. This is an adaptation of Introduction to Business by OpenStax. You can access the textbook as pdf for free at openstax.org. Minor editorial changes were made to ensure a better ebook reading experience. Textbook content produced by OpenStax is licensed under a Creative Commons Attribution 4.0 International License.
Download or read book Factory Physics written by Wallace J. Hopp and published by Waveland Press. This book was released on 2011-08-31 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our economy and future way of life depend on how well American manufacturing managers adapt to the dynamic, globally competitive landscape and evolve their firms to keep pace. A major challenge is how to structure the firms environment so that it attains the speed and low cost of high-volume flow lines while retaining the flexibility and customization potential of a low-volume job shop. The books three parts are organized according to three categories of skills required by managers and engineers: basics, intuition, and synthesis. Part I reviews traditional operations management techniques and identifies the necessary components of the science of manufacturing. Part II presents the core concepts of the book, beginning with the structure of the science of manufacturing and a discussion of the systems approach to problem solving. Other topics include behavioral tendencies of manufacturing plants, push and pull production systems, the human element in operations management, and the relationship between quality and operations. Chapter conclusions include main points and observations framed as manufacturing laws. In Part III, the lessons of Part I and the laws of Part II are applied to address specific manufacturing management issues in detail. The authors compare and contrast common problems, including shop floor control, long-range aggregate planning, workforce planning and capacity management. A main focus in Part III is to help readers visualize how general concepts in Part II can be applied to specific problems. Written for both engineering and management students, the authors demonstrate the effectiveness of a rule-based and data driven approach to operations planning and control. They advance an organized framework from which to evaluate management practices and develop useful intuition about manufacturing systems.
Download or read book The Dark Factory and the Future of Manufacturing written by Philip J. Gisi and published by CRC Press. This book was released on 2024-02-19 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world of manufacturing is undergoing significant changes driven by various factors and technological advancements. Automation and robotics technologies are revolutionizing manufacturing processes. Robotic systems are being increasingly used for repetitive and precise tasks, improving efficiency, quality, and safety. The Internet of Things (IoT) is enabling connectivity and data exchange between devices and systems. Manufacturing generates vast amounts of data and is leveraging this data through advanced analytics, providing valuable insights to optimize production processes, predict maintenance needs, and improve supply chain management. Additive Manufacturing has also gained significant traction in manufacturing. It enables the creation of complex parts and prototypes, customization, and rapid prototyping. Supply chains are becoming more interconnected and digitally integrated. Technologies such as blockchain enable transparent and secure transactions, traceability, and efficient inventory management. These trends and others are reshaping the manufacturing industry, promoting increased efficiency, agility, and sustainability. Manufacturers must be aware, understand, and embrace these changes to stay competitive and meet the evolving demands of customers in the modern era. This book enhances the awareness and understanding of these core technologies by explaining what they are and how they are being used in manufacturing. In addition, it provides practical suggestions on how to advance manufacturing in light of these changes. The book provides a view into the future and direction on how to navigate the journey to a more automated, smarter, and continuously learning factory. This book consolidates the major elements of the fourth industrial revolution and describes them in clear terms within the context of integrated manufacturing. It creates awareness and a fundamental understanding of the advanced technologies that are coming together to facilitate highly automated, smarter, agile, and sustainable operations.
Download or read book The Hybrid Factory in Europe written by H. Kumon and published by Springer. This book was released on 2004-08-31 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book evaluates the conditions for the international transfer of Japanese-style management and production techniques to Europe. Using an investigation of Japanese manufacturing companies with operations in Europe, the authors shed light on 'hybrid factories', which combine elements of Japanese and European management and production techniques.
Download or read book Future of Airplane Factory written by George Nicholas Bullen and published by SAE International. This book was released on 2019-05-28 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Future of Airplane Factory: Digitally Optimized Intelligent Airplane Factory defines the architecture, key building blocks, and roadmap for actualizing a future airplane factory (FAF) that is digitally optimized for intelligent airplane assembly. They fit and integrate with other FAF building blocks that aggregate to a Digitally Optimized Intelligent Airplane Factory (DOIAF). The word "intelligent" refers to the ability of a system to make right decisions and take right action in the highly dynamic and fluid environment of the modern airplane manufacturing space. The event-driven dynamics inherent in the complexity of this environment drive the need for expert knowledge which resides in intelligence systems incorporating the experience of experts. Expert knowledge need not be smart, brilliant, or possess genius as long as the outcomes are derived from right decisions resulting in right actions-applied rapidly to sustain an optimized factory enterprise. Complete factory enterprise visibility requires a higher order of decision capability that current operating systems do not have. A highly visible factory collects and displays data and information as it happens-at a rate beyond the ability of humans and current systems to analyze, process, decide, and act upon. Expert systems are constructed to present humans with right decisions in the form of optimal choices for right actions by incorporating the knowledge of experts into the logic for the decision. Structured Knowledge-Based Expert Systems (SKBES) are incorporated in this book and defined as a critical component for full enterprise actionable visibility. The power of the Digitally Optimized Intelligent Airplane Factory not only is found in its ability to unify the factory, reduce touch labor, improve quality, and streamline throughput but it also enables a significant reduction in above-the-shop-floor support and management. Such an ecosystem frees the human to focus on the complexity of interpersonal responsibilities. If the use of a DOIAF can be viewed as a holistic mechanism, then the human can be the agent engaging with that mechanism; improving negotiations for pricing, contracts, or other person-to-person events that require instinct and relationship.
Download or read book The Australian Army Uniform and the Government Clothing Factory written by Anneke van Mosseveld and published by Springer. This book was released on 2018-02-13 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reveals the business history of the Australian Government Clothing Factory as it introduced innovative changes in the production and design of the Australian Army uniform during the twentieth century. While adopting a Schumpeterian interpretation of the concept of innovation, Anneke van Mosseveld traces the driving forces behind innovation and delivers a comprehensive explanation of the resulting changes in the combat uniform. Using an array of archival sources, this book displays details of extensive collaborations between the factory, the Army and scientists in the development of camouflage patterns and military textiles. It uncovers a system of intellectual property management to protect the designs of the uniform, and delivers new insights into the wider economic influences and industry linkages of the Government owned factory.
