Download or read book Factors Affecting the Design for Corrosion Protection in Concrete Offshore and Marine Structures written by P. Fidjestol and published by . This book was released on 1987 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recommendations for the Design and Construction of Concrete Sea Structures written by FEDERATION INTERNATIONALE DE LA PRECONTRAINTE. LONDON. and published by . This book was released on 1977 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Marine and Offshore Corrosion written by Kenneth A Chandler and published by Elsevier. This book was released on 2014-05-12 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Marine and Offshore Corrosion describes the principles of effective corrosion control treatments in marine environments, with emphasis on economic solutions to corrosion. The book explains chemical or electrochemical reaction of an alloy with its environment leading to corrosion, and mechanical loss of the metal by erosion, abrasion, or wear resulting also in corrosion. A main consideration of erosion control that the engineer should look into is the economic side. Other considerations that he should investigate are the strength of a structure, time for construction, availability of materials, and costs. The book also discusses the marine environment consisting of sea water, temperature fluctuations, dissolved gases, hydrogen sulphide, ammonia, carbon dioxide, electrical conductivity, fouling. The text describes the selection of materials to be used in marine environments, surface preparation of steel before painting, the type of paint, and metallic coatings. Some of the factors in selecting coating systems are: cost and estimated life before the first scheduled maintenance, adhesion properties, moisture tolerance, elasticity, chemical resistance, impact resistance, bacterial resistance. The factors affecting maintenance include environmental conditions, quality of initial protection applied, type of structure, as well as the design and purpose of the structure. The book has been prepared for engineers and designers who are not corrosion specialists but have to deal with marine corrosion problems as part of their day-to-day professional activities. The text will also turn out to be useful for engineers with general interest in structure, building, or machinery maintenance specially those located near coastal areas.
Download or read book Corrosion Control for Offshore Structures written by Ramesh Singh and published by Gulf Professional Publishing. This book was released on 2014-08-12 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: A variable game changer for those companies operating in hostile, corrosive marine environments, Corrosion Control for Offshore Structures provides critical corrosion control tips and techniques that will prolong structural life while saving millions in cost. In this book, Ramesh Singh explains the ABCs of prolonging structural life of platforms and pipelines while reducing cost and decreasing the risk of failure. Corrosion Control for Offshore Structures places major emphasis on the popular use of cathodic protection (CP) combined with high efficiency coating to prevent subsea corrosion. This reference begins with the fundamental science of corrosion and structures and then moves on to cover more advanced topics such as cathodic protection, coating as corrosion prevention using mill applied coatings, field applications, and the advantages and limitations of some common coating systems. In addition, the author provides expert insight on a number of NACE and DNV standards and recommended practices as well as ISO and Standard and Test Methods. Packed with tables, charts and case studies, Corrosion Control for Offshore Structures is a valuable guide to offshore corrosion control both in terms of its theory and application. Prolong the structural life of your offshore platforms and pipelines Understand critical topics such as cathodic protection and coating as corrosion prevention with mill applied coatings Gain expert insight on a number of NACE and DNV standards and recommended practices as well as ISO and Standard Test Methods.
Download or read book Petroleum and Marine Technology Information Guide written by J. Hutcheon and published by CRC Press. This book was released on 2003-09-02 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1981 as the Offshore Information Guide this guide to information sources has been hailed internationally as an indispensable handbook for the oil, gas and marine industries.
Download or read book Concrete in Coastal Structures written by Richard Thomas Lingen Allen and published by Thomas Telford. This book was released on 1998 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describing the nature of the marine environment and the effects of man-made structures on the behaviour of the sea, this books deals with hydraulic design, the material properties of concrete and the design and specification of structures for coastal environments.
Download or read book Marine Concrete Structures written by Mark Alexander and published by Woodhead Publishing. This book was released on 2016-09-13 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Marine Concrete Structures: Design, Durability and Performance comprehensively examines structures located in, under, or in close proximity to the sea. A major emphasis of the book is on the long-term performance of marine concrete structures that not only represent major infrastructure investment and provision, but are also required to operate with minimal maintenance. Chapters review the design, specification, construction, and operation of marine concrete structures, and examine their performance and durability in the marine environment. A number of case studies of significant marine concrete structures from around the world are included which help to reinforce the principles outlined in earlier chapters and provide useful background to these types of structures. The result is a thorough and up-to-date reference source that engineers, researchers, and postgraduate students in this field will find invaluable. Covers, in detail, the design, specification, construction, and operation of marine concrete structures Examines the properties and performance of concrete in the marine environment Provides case studies on significant marine concrete structures and durability-based design from around the world
Download or read book Corrosion and Corrosion Protection of Wind Power Structures in Marine Environments written by Andreas Momber and published by Academic Press. This book was released on 2024-04-07 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion and Corrosion Protection of Wind Power Structures in Marine Environments: Volume 2: Corrosion Protection Measures offers the first comprehensive review on corrosion and corrosion protection of offshore wind power structures. The book extensively discusses corrosion phenomena and corrosion types in different marine corrosion zones, including the modeling of corrosion processes and interactions between corrosion and structural stability. The book addresses important design issues, namely materials selection relevant to their performance in marine environments, corrosion allowance, and constructive design. Active and passive corrosion protection measures are emphasized, with special sections on cathodic corrosion protection and the use of protective coatings. Seawater related issues associated with cathodic protection, such as calcareous deposit formation, hydrogen formation, and fouling, are discussed. With respect to protective coatings, the book considers, for the first time, complete loading scenarios, including corrosive loads, mechanical loads, and special loads, and covers a wide range of coating materials. Problems associated with fouling and bacterial-induced corrosion are extensively reviewed. The book closes with a chapter on recent developments in maintenance strategies, inspection techniques, and repair technologies. The book will be of special interest to materials scientists, materials developers, corrosion engineers, maintenance engineers, civil engineers, steel work designers, mechanical engineers, marine engineers, chemists, and coating specialists. Offshore wind power is an emerging renewable technology and a key factor for a cleaner environment. Offshore wind power structures are situated in a demanding and challenging marine environment. The structures are loaded in a complex way, including mechanical loads and corrosive loads. Corrosion is one of the major limiting factors to the reliability and performance of the technology. Maintenance and repair of corrosion protection systems are particularly laborious and costly. Explores the literature between 1950 and 2020 and contains over 2000 references Offers the most complete monograph on the issue Covers all aspects of corrosion protection in detail, including coatings, cathodic protection, corrosion allowance, constructive design, as well as maintenance and repair Delivers the most complete review on corrosion of metals in marine/offshore environments Focuses on all aspects of offshore wind power structures, namely foundations, towers, internal sections, connection flanges, and transformation platforms
Download or read book Corrosion and Corrosion Protection of Wind Power Structures in Marine Environments written by Andreas Momber and published by Academic Press. This book was released on 2024-04-06 with total page 777 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion and Corrosion Protection of Wind Power Structures in Marine Environments: Volume 1: Introduction and Corrosive Loads offers the first comprehensive review on corrosion and corrosion protection of offshore wind power structures. The book provides extensive discussion on corrosion phenomena and types in different marine corrosion zones, including the modeling of corrosion processes and interactions between corrosion and structural stability. The book addresses important design issues, namely materials selection relative to performance in marine environments, corrosion allowance, and constructive design. Active and passive corrosion protection measures are emphasized, with special sections on cathodic corrosion protection and the use of protective coatings. Seawater related issues associated with cathodic protection, such as calcareous deposit formation, hydrogen formation and fouling, are discussed. With respect to protective coatings, the book considers for the first time complete loading scenarios, including corrosive loads, mechanical loads, and special loads, and covers a wide range of coating materials. Problems associated with fouling and bacterial-induced corrosion are extensively reviewed. The book closes with a chapter on recent developments in maintenance strategies, inspection techniques, and repair technologies. The book is of special interest to materials scientists, materials developers, corrosion engineers, maintenance engineers, civil engineers, steel work designers, mechanical engineers, marine engineers. Offshore wind power is an emerging renewable technology and a key factor for a cleaner environment. Offshore wind power structures are situated in a demanding and challenging marine environment. The structures are loaded in a complex way, including mechanical loads and corrosive loads. Corrosion is one of the major limiting factors to the reliability and performance of the technology. Maintenance and repair of corrosion protection systems are particularly laborious and costly. Explores the literature between 1950 and 2020 and contains over 2000 references Offers the most complete monograph on the issue Covers all aspects of corrosion protection in detail, including coatings, cathodic protection, corrosion allowance, and constructive design, as well as maintenance and repair Delivers the most complete review on corrosion of metals in marine/offshore environments Focuses on all aspects of offshore wind power structures, including foundations, towers, internal sections, connection flanges, and transformation platforms
Download or read book Corrosion and Corrosion Control for Offshore and Marine Construction written by International Conference on Corrosion and Corrosion Control for Offshore and Marine Construction (1988 : Xiamen) and published by . This book was released on 1989 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and construction of concrete sea structures 4th edition written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1985-01-01 with total page 39 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion Prevention and Control written by and published by . This book was released on 1989 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials in Marine Technology written by Robert L. Reuben and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials in Marine Technology covers the important aspects of metallurgy and materials engineering which must be taken into account when designing for marine environments. The purpose is to aid materials selection and the incorporation of materials data into the design, manufacture and inspection strategy. Recent advances in materials technology, including the use of new materials for marine applications Alloys, Polymers and Composites are examined in detail. The integrated approach is design oriented and is supported by recent case studies.
Download or read book Offshore Research Focus written by and published by . This book was released on 1992 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Understanding Biocorrosion written by T Liengen and published by Elsevier. This book was released on 2014-11-14 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biocorrosion refers to corrosion influenced by bacteria adhering to surfaces in biofilms. Biocorrosion is a major problem in areas such as cooling systems and marine structures where biofilms can develop. This book summarises key recent research in this subject. Part one looks at theories of biocorrosion and measurement techniques. Part two discusses how bacteria and biofilms result in biocorrosion. The final part of the book includes case studies of biocorrosion in areas as diverse as buildings, fuels, marine environments and cooling systems. Provides a detailed overview of biocorrosion and the different scientific and/or industrial problems related to microbially induced corrosion Introduces a variety of investigative techniques and methodologies that are employed in diagnosing and evaluating microbially induced corrosion Includes case studies on: biodeterioration of building materials; biocorrosion issues associated with diesel and biofuels; marine biocorrosion; corrosion of open recirculating cooling water systems and cooling system components; the effect of H2S on steel corrosion
Download or read book Essentials of Offshore Structures written by D.V. Reddy and published by CRC Press. This book was released on 2013-06-24 with total page 687 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essentials of Offshore Structures: Framed and Gravity Platforms examines the engineering ideas and offshore drilling platforms for exploration and production. This book offers a clear and acceptable demonstration of both the theory and application of the relevant procedures of structural, fluid, and geotechnical mechanics to offshore structures. It makes available a multitude of "solved problems" and "sample problems to solve" which give readers a strong understanding of the analysis and design of steel-framed and base-supported concrete gravity offshore structures. The book highlights sensible engineering applications for offshore structural design, research, and development; it can also be useful to those working in the design industry. The user will have a detailed overview of the various structures used in the offshore environment and the preliminary costing factors that will influence their choice for the site. Analytical principles emphasized in the book will help the user to clearly comprehend the various issues that need to be taken into account in the analysis and design of an offshore structure, using the API code. The book includes extensive worked-out problems and sample problems for use by the students and instructors, with a Solution Manual. The seabed pile/gravity foundation analyses and design are clearly outlined with their embedment characteristics and problems worked out. A global description of environmental forces has been given that includes those due to wave, wind, current, tides, earthquakes, ice floe/sheet action, and limit ice-load on Arctic structures. The book outlines the various factors that influence the material choice for offshore structures including fatigue and corrosion of the platforms in the ocean environment. Separate chapters detail the factors that influence the pile embedment and concrete gravity foundation characteristics, material choice including fatigue and corrosion, estimation of ocean environmental forces that will be exerted on the offshore structures, and the analysis fundamentals that the reader needs to possess. The last two chapters give detailed insights into the analysis and design of framed and concrete gravity platform offshore structures using API code procedures. Overall, this book is a comprehensive presentation of the analysis and design of steel and concrete offshore structures.
Download or read book Offshore Structures written by Mohamed A. El-Reedy and published by Gulf Professional Publishing. This book was released on 2019-11-06 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offshore Structures: Design, Construction and Maintenance, Second Edition covers all types of offshore structures and platforms employed worldwide. As the ultimate reference for selecting, operating and maintaining offshore structures, this book provides a roadmap for designing structures which will stand up even in the harshest environments. Subsea pipeline design and installation is also covered in this edition, as is the selection of the proper type of offshore structure, the design procedure for the fixed offshore structure, nonlinear analysis (Push over) as a new technique to design and assess the existing structure, and more. With this book in hand, engineers will have the most up-to-date methods for performing a structural lifecycle analysis, implementing maintenance plans for topsides and jackets and using non-destructive testing. Provides a one-stop guide to offshore structure design and analysis Presents easy-to-understand methods for structural lifecycle analysis Contains expert advice for designing offshore platforms for all types of environments
