Download or read book Handbook on Face Gear Drives with a Spur Involute Pinion written by Faydor L. Litvin and published by . This book was released on 2000 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of face gears in power transmission and drive systems has a significant number of benefits. Face gears allow a variety of new transmission arrangements as well as high reduction ratio capability. This leads to drive system weight reduction and improvements in performance. In this work, basic information about the design and analysis of face gear drives is presented. The work considers face gears in mesh with spur involute pinions for both intersecting axes and offset drives. Tooth geometry, kinematics, generation of face gears with localized bearing contact by cutting and grinding, avoidance of tooth undercutting, avoidance of tooth pointing, tooth contact analysis, and algorithms for the simulation of meshing and contact are all topics which are discussed. In addition, applications of face gear drives are presented. Included are design uses in aerospace applications such as helicopter transmissions, split-torque face gear arrangements, comparisons of face gears with bevel gears, and general design considerations.
Download or read book Face gear Drives Design Analysis and Testing for Helicopter Transmission Applications written by and published by . This book was released on 1992 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Face Gear Drive with Spur Involute Pinion Geometry Generation by a Worm Stress Analysis written by and published by . This book was released on 2002 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: A face gear drive with a spur involute pinion is considered. The generation of the face gear is based on application of a grinding or cutting worm whereas the conventional method of generation is based on application of an involute shaper. An analytical approach for determination of: (1) the worm thread surface, (2) avoidance of singularities of the worm thread surface, (3) dressing of the worm, and (4) determination of stresses of the face-gear drive, is proposed. A computer program for simulation of meshing and contact of the pinion and face-gear has been developed. Correction of machine-tool settings is proposed for reduction of the shift of the bearing contact caused by misalignment. An automatic development of the model of five contacting teeth has been proposed for stress analysis. Numerical examples for illustration of the developed theory are provided.
Download or read book Handbook on Face Gear Drives with a Spur Involute Pinion written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-13 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of face gears in power transmission and drive systems has a significant number of benefits. Face gears allow a variety of new transmission arrangements as well as high reduction ratio capability. This leads to drive system weight reduction and improvements in performance. In this work, basic information about the design and analysis of face gear drives is presented. The work considers face gears in mesh with spur involute pinions for both intersecting axes and offset drives. Tooth geometry, kinematics, generation of face gears with localized bearing contact by cutting and grinding, avoidance of tooth undercutting, avoidance of tooth pointing, tooth contact analysis, and algorithms for the simulation of meshing and contact arc all topics which are discussed. In addition, applications of face gear drives are presented. Included are design uses in aerospace applications such as helicopter transmissions, split-torque face gear arrangements, comparisons of face gears with bevel gears, and general design considerations. Litvin, F. L. and Egelja, A. and Tan, J. and Chen, D. Y.-D. and Heath, G. Glenn Research Center NCC3-356; RTOP 581-30-13; DA Proj. 1L1-62211-A4-7A
Download or read book Face Gear Drive with Helical Involute Pinion written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-05-31 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new type of face-gear drive with intersected axes of rotation formed by a helical involute pinion and conjugated face-gear has been investigated. Generation of face-gears by a shaper free of undercutting and pointing has been investigated. A new method of grinding or cutting of face-gears by a worm of special shape has been developed. A computerized design procedure has been developed to avoid undercutting and pointing by a shaper or by a generating worm. Also, a method to determine the limitations of the helix angle magnitude has been developed. The method provides a localization of the bearing contact to reduce the shift of bearing contact caused by misalignment. The analytical method provides a simulation of the meshing and contact of misaligned gear drives. An automatic mesh generation method has been developed and used to conduct a 3D contact stress analysis of several teeth. The theory developed is illustrated with several examples.Litvin, Faydor L. and Fuentes, Alfonso and Gonzalez-Perez, Ignacio and Piscopo, Alessandro and Ruzziconi, PaoloGlenn Research CenterSHAPERS; GEAR TEETH; TRANSMISSIONS (MACHINE ELEMENTS); STRESS ANALYSIS; SINGULARITY (MATHEMATICS); HELICES; MECHANICAL ENGINEERING; AXES OF ROTATION; COMPUTER SYSTEMS DESIGN; CONJUGATION; MISALIGNMENT; POSITION (LOCATION); MECHANICAL DRIVES; HELICOPTERS; GRID GENERATION (MATHEMATICS)
Download or read book Design Generation and Tooth Contact Analysis TCA of Asymmetric Face Gear Drive With Modified Geometry written by and published by . This book was released on 2001 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new type of face gear drive for application in transmissions, particularly in helicopters, has been developed. The new geometty differs from the existing geometry by application of asymmetric profiles and double-crowned pinion of the face gear mesh. The paper describes the computerized design, simulation of meshing and contact, and stress analysis by finite element method. Special purpose computer codes have been developed to conduct the analysis. The analysis of this new type of face gear is illustrated with a numerical example.
Download or read book Grandview United Church 1891 1967 Past and Present written by and published by . This book was released on 1967* with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Theory and Practice of Worm Gear Drives written by Ilés Dudás and published by Butterworth-Heinemann. This book was released on 2005-11-04 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Worm gears are special gears that resemble screws, and can be used to drive other gears. Worm gears, enable two non-touching shafts in a machine to mesh (join) together. This publication, unique in that it combines both theoretical and practical design aspects, including the latest results of research and development, provides detailed treatment of the theory and production of worm drives, as well as the overarching subject of production geometry of helicoidal surfaces.Included are mathematical models for a number of practical applications; a description of dressing equipment required; treatment of inspection and measurement; the use of intelligent systems; worm gearing for power transmission; selection criteria.·Covers theory and practice of the production and use of these common machine elements·Ideal for researchers and engineers dealing with mechanical drives, gears and manufacturing·The first single volume text in this diverse field
Download or read book Gears written by Vincenzo Vullo and published by Springer Nature. This book was released on 2020-01-24 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book explores the geometric and kinematic design of the various types of gears most commonly used in practical applications, also considering the problems concerning their cutting processes. The cylindrical spur and helical gears are first considered, determining their main geometric quantities in the light of interference and undercut problems, as well as the related kinematic parameters. Particular attention is paid to the profile shift of these types of gears either generated by rack-type cutter or by pinion-rack cutter. Among other things, profile-shifted toothing allows to obtain teeth shapes capable of greater strength and more balanced specific sliding, as well as to reduce the number of teeth below the minimum one to avoid the operating interference or undercut. These very important aspects of geometric-kinematic design of cylindrical spur and helical gears are then generalized and extended to the other examined types of gears most commonly used in practical applications, such as: straight bevel gears; crossed helical gears; worm gears; spiral bevel and hypoid gears. Finally, ordinary gear trains, planetary gear trains and face gear drives are discussed. Includes fully-developed exercises to draw the reader's attention to the problems that are of interest to the designer, as well as to clarify the calculation procedure Topics are addressed from a theoretical standpoint, but in such a way as not to lose sight of the physical phenomena that characterize the various types of gears which are examined The analytical and numerical solutions are formulated so as to be of interest not only to academics, but also to designers who deal with actual engineering problems concerning the gears
Download or read book Gear Geometry and Applied Theory written by Faydor L. Litvin and published by Cambridge University Press. This book was released on 2004-09-06 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised, expanded edition covers the theory, design, geometry, and manufacture of all types of gears and gear drives. An invaluable reference for designers, theoreticians, students, and manufacturers, the second edition includes advances in gear theory, gear manufacturing, and computer simulation. Among the new topics are: new geometry for gears and pumps; new design approaches for planetary gear trains and bevel gear drives; an enhanced approach for stress analysis; new methods of grinding and gear shaving; and new theory on the simulation and its application. First Edition published by Pearson Education Hb (1994): 0-132-11095-4
Download or read book New Geometry of Worm Face Gear Drives With Conical and Cylindrical Worms Generation Simulation of Meshing and Stress Analysis written by and published by . This book was released on 2002 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: New geometry of face worm gear drives with conical and cylindrical worms is proposed. The generation of the face worm-gear is based on application of a tilted head-cutter (grinding tool) instead of application of a hob applied at present. The generation of a conjugated worm is based on application of a tilted head-cutter (grinding tool) as well. The bearing contact of the gear drive is localized and is oriented longitudinally. A predesigned parabolic function of transmission errors for reduction of noise and vibration is provided. The stress analysis of the gear drive is performed using a three-dimensional finite element analysis. The contacting model is automatically generated. The developed theory is illustrated with numerical examples.
Download or read book Direct Gear Design written by Alexander L. Kapelevich and published by CRC Press. This book was released on 2013-03-22 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last several decades, gearing development has focused on improvements in materials, manufacturing technology and tooling, thermal treatment, and coatings and lubricants. In contrast, gear design methods have remained frozen in time, as the vast majority of gears are designed with standard tooth proportions. This over-standardization significantly limits the potential performance of custom gear drives, especially in demanding aerospace or automotive applications. Direct Gear Design introduces an alternate gear design approach to maximize gear drive performance in custom gear applications. Developed by the author, the Direct Gear Design® method has been successfully implemented in a wide variety of custom gear transmissions over the past 30 years. The results are maximized gear drive performance, increased transmission load capacity and efficiency, and reduced size and weight. This book explains the method clearly, making it easy to apply to actual gear design. Describes the origin and theoretical foundations of the Direct Gear Design approach as well as some of its applications—and its limits Details the optimization techniques and the specifics of Direct Gear Design Discusses how this approach can be used with asymmetric gears to further improve performance Describes tolerance selection, manufacturing technologies, and measurement methods of custom gears Compares Direct Gear Design with traditional gear design from both an analytical and an experimental perspective Illustrates the applicability and benefits of this gear design approach with implementation examples Written by an engineer for engineers, this book presents a unique alternative to traditional gear design. It inspires readers to explore ways of improving gear transmission performance in custom gear applications, from higher transmission load capacity, efficiency, and reliability to lower size, weight, and cost.
Download or read book Face Gear Drives written by Faydor Litvin and published by . This book was released on 1992-10-01 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis and Design of Machine Elements written by Wei Jiang and published by John Wiley & Sons. This book was released on 2019-01-30 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: Incorporating Chinese, European, and International standards and units of measurement, this book presents a classic subject in an up-to-date manner with a strong emphasis on failure analysis and prevention-based machine element design. It presents concepts, principles, data, analyses, procedures, and decision-making techniques necessary to design safe, efficient, and workable machine elements. Design-centric and focused, the book will help students develop the ability to conceptualize designs from written requirements and to translate these design concepts into models and detailed manufacturing drawings. Presents a consistent approach to the design of different machine elements from failure analysis through strength analysis and structural design, which facilitates students’ understanding, learning, and integration of analysis with design Fundamental theoretical topics such as mechanics, friction, wear and lubrication, and fluid mechanics are embedded in each chapter to illustrate design in practice Includes examples, exercises, review questions, design and practice problems, and CAD examples in each self-contained chapter to enhance learning Analysis and Design of Machine Elements is a design-centric textbook for advanced undergraduates majoring in Mechanical Engineering. Advanced students and engineers specializing in product design, vehicle engineering, power machinery, and engineering will also find it a useful reference and practical guide.
Download or read book Gear Geometry and Applied Theory written by Faydor L. Litvin and published by Cambridge University Press. This book was released on 2004-09-06 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised, expanded, edition covers the theory, design, geometry and manufacture of all types of gears and gear drives. This is an invaluable reference for designers, theoreticians, students, and manufacturers. This edition includes advances in gear theory, gear manufacturing, and computer simulation. Among the new topics are: 1. New geometry for modified spur and helical gears, face-gear drives, and cycloidal pumps. 2. New design approaches for one stage planetary gear trains and spiral bevel gear drives. 3. An enhanced approach for stress analysis of gear drives with FEM. 4. New methods of grinding face gear drives, generating double crowned pinions, and improved helical gear shaving. 5. Broad application of simulation of meshing and TCA. 6. New theories on the simulation of meshing for multi-body systems, detection of cases wherein the contact line on generating surfaces may have its own envelope, and detection and avoidance of singularities of generated surfaces.
Download or read book Geometry Design and Generation of Face gear Drives written by Jyh-Chiang Wang and published by . This book was released on 1992 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gears written by Vincenzo Vullo and published by Springer Nature. This book was released on 2020-02-21 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the geometric and kinematic design of the various types of gears most commonly used in practical applications, also considering the problems concerning their cutting processes. The cylindrical spur and helical gears are first considered, determining their main geometric quantities in the light of interference and undercut problems, as well as the related kinematic parameters. Particular attention is paid to the profile shift of these types of gears either generated by rack-type cutter or by pinion-rack cutter. Among other things, profile-shifted toothing allows to obtain teeth shapes capable of greater strength and more balanced specific sliding, as well as to reduce the number of teeth below the minimum one to avoid the operating interference or undercut. These very important aspects of geometric-kinematic design of cylindrical spur and helical gears are then generalized and extended to the other examined types of gears most commonly used in practical applications, such as straight bevel gears; crossed helical gears; worm gears; spiral bevel and hypoid gears. Finally, ordinary gear trains, planetary gear trains and face gear drives are discussed. This is the most advanced reference guide to the state of the art in gear engineering. Topics are addressed from a theoretical standpoint, but in such a way as not to lose sight of the physical phenomena that characterize the various types of gears which are examined. The analytical and numerical solutions are formulated so as to be of interest not only to academics, but also to designers who deal with actual engineering problems concerning the gears
