Download or read book Materials Science and Technology of Optical Fabrication written by Tayyab I. Suratwala and published by John Wiley & Sons. This book was released on 2018-10-16 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the fundamental science of grinding and polishing by examining the chemical and mechanical interactions over many scale lengths Manufacturing next generation optics has been, and will continue to be, enablers for enhancing the performance of advanced laser, imaging, and spectroscopy systems. This book reexamines the age-old field of optical fabrication from a materials-science perspective, specifically the multiple, complex interactions between the workpiece (optic), slurry, and lap. It also describes novel characterization and fabrication techniques to improve and better understand the optical fabrication process, ultimately leading to higher quality optics with higher yield. Materials Science and Technology of Optical Fabrication is divided into two major parts. The first part describes the phenomena and corresponding process parameters affecting both the grinding and polishing processes during optical fabrication. It then relates them to the critical resulting properties of the optic (surface quality, surface figure, surface roughness, and material removal rate). The second part of the book covers a number of related topics including: developed forensic tools used to increase yield of optics with respect to surface quality (scratch/dig) and fracture loss; novel characterization and fabrication techniques used to understand/quantify the fundamental phenomena described in the first part of the book; novel and recent optical fabrication processes and their connection with the fundamental interactions; and finally, special techniques utilized to fabricate optics with high damage resistance. Focuses on the fundamentals of grinding and polishing, from a materials science viewpoint, by studying the chemical and mechanical interactions/phenomena over many scale lengths between the workpiece, slurry, and lap Explains how these phenomena affect the major characteristics of the optic workpiece—namely surface figure, surface quality, surface roughness, and material removal rate Describes methods to improve the major characteristics of the workpiece as well as improve process yield, such as through fractography and scratch forensics Covers novel characterization and fabrication techniques used to understand and quantify the fundamental phenomena of various aspects of the workpiece or fabrication process Details novel and recent optical fabrication processes and their connection with the fundamental interactions Materials Science and Technology of Optical Fabrication is an excellent guidebook for process engineers, fabrication engineers, manufacturing engineers, optical scientists, and opticians in the optical fabrication industry. It will also be helpful for students studying material science and applied optics/photonics.
Download or read book Inkjet Technology for Digital Fabrication written by Ian M. Hutchings and published by John Wiley & Sons. This book was released on 2012-11-09 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whilst inkjet technology is well-established on home and small office desktops and is now having increasing impact in commercial printing, it can also be used to deposit materials other than ink as individual droplets at a microscopic scale. This allows metals, ceramics, polymers and biological materials (including living cells) to be patterned on to substrates under precise digital control. This approach offers huge potential advantages for manufacturing, since inkjet methods can be used to generate structures and functions which cannot be attained in other ways. Beginning with an overview of the fundamentals, this bookcovers the key components, for example piezoelectric print-heads and fluids for inkjet printing, and the processes involved. It goes on to describe specific applications, e.g. MEMS, printed circuits, active and passive electronics, biopolymers and living cells, and additive manufacturing. Detailed case studies are included on flat-panel OLED displays, RFID (radio-frequency identification) manufacturing and tissue engineering, while a comprehensive examination of the current technologies and future directions of inkjet technology completes the coverage. With contributions from both academic researchers and leading names in the industry, Inkjet Technology for Digital Fabrication is a comprehensive resource for technical development engineers, researchers and students in inkjet technology and system development, and will also appeal to researchers in chemistry, physics, engineering, materials science and electronics.
Download or read book Ceramic Fabrication Technology written by Roy W. Rice and published by CRC Press. This book was released on 2002-11-08 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridging the gap between textbook science and real-world engineering and operational applications, this reference presents comprehensive and easy-to-follow summaries and evaluations of fabrication techniques for ceramic and ceramic composite specimens and components. The author addresses both conventional and alternative powder-based fabrication, chemical vapor deposition, melt processing, and reaction processing. Topics include the preparation of ceramic powders, plastic forming, colloidal processing, the use of additives to aid densification, hot pressing, the fabrication of filaments for reinforcement, rapid prototyping, and gaseous impurities.
Download or read book Fabrication and Welding Engineering written by Roger Timings and published by Routledge. This book was released on 2008 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers basic sheet-metal fabrication and welding engineering principles and applications. This title includes chapters on non-technical but essential subjects such as health and safety, personal development and communication of technical information. It contains illustrations that demonstrate the practical application of the procedures described.
Download or read book Integrated Circuit Fabrication Technology written by David J. Elliott and published by McGraw-Hill Companies. This book was released on 1982 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book III V Integrated Circuit Fabrication Technology written by Shiban Tiku and published by CRC Press. This book was released on 2016-04-27 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: GaAs processing has reached a mature stage. New semiconductor compounds are emerging that will dominate future materials and device research, although the processing techniques used for GaAs will still remain relevant. This book covers all aspects of the current state of the art of III-V processing, with emphasis on HBTs. It is aimed at practicing
Download or read book Metal Fabrication Technology written by MUKHERJEE, SYAMAL and published by PHI Learning Pvt. Ltd.. This book was released on 2010-10 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive presentation of the fundamental concepts and applications of metal fabrication technology. Designed primarily for undergraduate and postgraduate students of mechanical engineering and production engineering, the book will also be useful for students of engineering diploma programmes in the above fields and certificate courses in metal fabrication and erection, as well as for practising engineers and consultants involved in welding, fabrication, erection, production planning, testing and design. The initial chapters of the book provide an overview of the metal fabrication industry, as well as an exhaustive discussion of the properties of the various engineering materials, heat treatment processes, and frame analysis. The focus then shifts to production planning and control, production line design, as well as drawing, marking and layout. The ensuing chapters explain elaborately the various metal cutting processes, metal forming methods, and manufacturing processes. Assembly and erection, joining and welding, fault analysis and inspection, and metal finishing are covered subsequently. The various systematic guidelines for erection as well as the different prohibited welding methods and welding defects are elucidated. The final chapter of the book is devoted to health and safety issues relevant to fabrication and erection. The book contains numerous illustrations that enable the students to gain a thorough understanding of the subject matter. The review questions at the end of each chapter help to test their comprehension of the underlying concepts.
Download or read book Fabrication Technology written by and published by . This book was released on 1974 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Photomask Fabrication Technology written by Benjamin G. Eynon and published by McGraw Hill Professional. This book was released on 2005-08-11 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photomasks, the printing masters for the fabrication of integrated circuits, have become a necessity of modern semiconductor manufacturing. This book details the science and technology of industrial photo mask production, including fundamental principles, industrial production flows, and technological evolution.
Download or read book DIgital Fabrications written by Lisa Iwamoto and published by Princeton Architectural Press. This book was released on 2013-07-02 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Fabrications, the second volume in our new Architecture Briefs series, celebrates the design ingenuity made possible by digital fabrication techniques. Author Lisa Iwamoto explores the methods architects use to calibrate digital designs with physical forms. The book is organized according to five types of digital fabrication techniques: tessellating, sectioning, folding, contouring, and forming. Projects are shown both in their finished forms and in working drawings, templates, and prototypes, allowing the reader to watch the process of each fantastic construction unfold. Digital Fabrications presents projects designed and built by emerging practices that pioneer techniques and experiment with fabrication processes on a small scale with a do-it-yourself attitude. Featured architects include AEDS/Ammar Eloueini, Atelier Manferdini, Brennan Buck, MOS, Office dA, Florencia Pita/MOD, Mafoomby, URBAN A+O, SYSTEMarchitects, Andrew Kudless/Matsys, IwamotoScott, Atelier Hitoshi Abe, Chris Bosse, Tom Wiscombe/EMERGENT, Thom Faulders Architecture, Jeremy Ficca, SPAN, GNUFORM, Heather Roberge, PATTERNS, Ruy Klein, and servo.
Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer. This book was released on 2014-11-26 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers in detail the various aspects of joining materials to form parts. A conceptual overview of rapid prototyping and layered manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Unusual and emerging applications such as micro-scale manufacturing, medical applications, aerospace, and rapid manufacturing are also discussed. This book provides a comprehensive overview of rapid prototyping technologies as well as support technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. This book also: Reflects recent developments and trends and adheres to the ASTM, SI, and other standards Includes chapters on automotive technology, aerospace technology and low-cost AM technologies Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered
Download or read book A Manual For Biomaterials scaffold Fabrication Technology written by Gilson Khang and published by World Scientific Publishing Company. This book was released on 2007-07-03 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tissue engineering has been recognized as offering an alternative technique to whole-organ and tissue transplantation for diseased, failed, or malfunctioned organs. To reconstruct a new tissue via tissue engineering, the following triad components are needed: (1) cells which are harvested and dissociated from the donor tissue; (2) biomaterials as scaffold substrates in which cells are attached and cultured, resulting in implantation at the desired site of the functioning tissue; and (3) growth factors which promote and/or prevent cell adhesion, proliferation, migration, and differentiation. Of these three key components, scaffolds play a critical role in tissue engineering. This timely book focuses on the preparation and characterization of scaffold biomaterials for the application of tissue-engineered scaffolds. More importantly, it serves as an experimental guidebook on the standardization of the fabrication process and characterization of scaffolding technology.
Download or read book Fab written by Neil Gershenfeld and published by Basic Books. This book was released on 2008-07-31 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: What if you could someday put the manufacturing power of an automobile plant on your desktop? It may sound far-fetched-but then, thirty years ago, the notion of "personal computers" in every home sounded like science fiction. According to Neil Gershenfeld, the renowned MIT scientist and inventor, the next big thing is personal fabrication -the ability to design and produce your own products, in your own home, with a machine that combines consumer electronics with industrial tools. Personal fabricators (PF's) are about to revolutionize the world just as personal computers did a generation ago. PF's will bring the programmability of the digital world to the rest of the world, by being able to make almost anything-including new personal fabricators. In FAB , Gershenfeld describes how personal fabrication is possible today, and how it is meeting local needs with locally developed solutions. He and his colleagues have created "fab labs" around the world, which, in his words, can be interpreted to mean "a lab for fabrication, or simply a fabulous laboratory." Using the machines in one of these labs, children in inner-city Boston have made saleable jewelry from scrap material. Villagers in India used their lab to develop devices for monitoring food safety and agricultural engine efficiency. Herders in the Lyngen Alps of northern Norway are developing wireless networks and animal tags so that their data can be as nomadic as their animals. And students at MIT have made everything from a defensive dress that protects its wearer's personal space to an alarm clock that must be wrestled into silence. These experiments are the vanguard of a new science and a new era-an era of "post-digital literacy" in which we will be as familiar with digital fabrication as we are with the of information processing. In this groundbreaking book, the scientist pioneering the revolution in personal fabrication reveals exactly what is being done, and how. The technology of FAB will allow people to create the objects they desire, and the kind of world they want to live in.
Download or read book Composite Technology 2e written by Hauke Lengsfeld and published by . This book was released on 2021-06-18 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepreg materials are pre-impregnated fibers for the manufacture of composite components, and are widely applied in the wind energy and aerospace industries. The properties of these semi-finished products, the type of processing, and the component design collectively play an important role in the quality and suitability for mass production of a fiber composite component. This book provides a holistic approach, showing the influence and mutual interaction of the parameters involved in the production of fiber composite components. Composite Technology gives an overview of the current state of prepreg technology, generation, and development as well as their variations and trends. It covers the fundamentals of prepreg preparation and starting materials; processing technology and automation; interactions between construction/design and material and between tooling material and composite components/design; testing of prepreg semi-finished products and components; and typical error patterns. New in this second edition is an extension of the coverage to include thermoplastic prepregs (TPPs) and their production, processing, and testing. Further updates on prepreg production and processing are also included.
Download or read book Science Technology and Applications of Metals in Additive Manufacturing written by Bhaskar Dutta and published by Elsevier. This book was released on 2019-08-15 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science, Technology and Applications of Metal Additive Manufacturing provides a holistic picture of metal Additive Manufacturing (AM) that encompasses the science, technology and applications for the use of metal AM. Users will find design aspects, various metal AM technologies commercially available, a focus on merits and demerits, implications for qualification and certification, applications, cost modeling of AM, and future directions. This book serves as an educational guide, providing a holistic picture of metal AM that encompasses science, technology and applications for the real-life use of metal AM. Includes an overall understanding of metal additive manufacturing, Including steps involved (process flow) Discusses available commercial metal AM technologies and their relative strengths and weaknesses Reviews the process of qualification of AM parts, various applications, cost modeling, and the future directions of metal AM
Download or read book Micro and Nano Fabrication Technology written by Jiwang Yan and published by Springer. This book was released on 2018-07-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on the state-of-the-art micro/nanofabrication technologies for creating miniature structures with high precision. These multidisciplinary technologies include mechanical, electrical, optical, physical, and chemical methods, as well as hybrid processes, covering subtractive and additive material manufacturing, as well as net-shape manufacturing. The materials the volume deals with include metals, alloys, semiconductors, polymers, crystals, glass, ceramics, composites, and nanomaterials. The volume is composed of 30 chapters, which are grouped into five parts. Engaging with the latest research in the field, these chapters provide important perspectives on key topics, from process developments at the shop level to scientific investigations at the academic level, offering both experimental work and theoretical analysis. Moreover, the content of this volume is highly interdisciplinary in nature, with insights from not only manufacturing technology but also mechanical/material science, optics, physics, chemistry, and more.
Download or read book Semiconductor Fabrication written by Dinesh C. Gupta and published by ASTM International. This book was released on 1989 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:
