Download or read book Fabrication of GaN Based Light Emitting Diodes LEDs with Specific Side Wall Structures written by 陳君彥 and published by . This book was released on 2017 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fabrication of GaN Based Light Emitting Diodes LEDs with Specific Structures written by 李侑霖 and published by . This book was released on 2018 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book III Nitride Based Light Emitting Diodes and Applications written by Tae-Yeon Seong and published by Springer. This book was released on 2017-05-18 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised edition of this important book presents updated and expanded coverage of light emitting diodes (LEDs) based on heteroepitaxial GaN on Si substrates, and includes new chapters on tunnel junction LEDs, green/yellow LEDs, and ultraviolet LEDs. Over the last two decades, significant progress has been made in the growth, doping and processing technologies of III-nitride based semiconductors, leading to considerable expectations for nitride semiconductors across a wide range of applications. LEDs are already used in traffic signals, signage lighting, and automotive applications, with the ultimate goal of the global replacement of traditional incandescent and fluorescent lamps, thus reducing energy consumption and cutting down on carbon-dioxide emission. However, some critical issues must be addressed to allow the further improvements required for the large-scale realization of solid-state lighting, and this book aims to provide the readers with details of some contemporary issues on which the performance of LEDs is seriously dependent. Most importantly, it describes why there must be a breakthrough in the growth of high-quality nitride semiconductor epitaxial layers with a low density of dislocations, in particular, in the growth of Al-rich and In-rich GaN-based semiconductors. The quality of materials is directly dependent on the substrates used, such as sapphire and Si, and the book discusses these as well as topics such as efficiency droop, growth in different orientations, polarization, and chip processing and packaging technologies. Offering an overview of the state of the art in III-Nitride LED science and technology, the book will be a core reference for researchers and engineers involved with the developments of solid state lighting, and required reading for students entering the field.
Download or read book III Nitride LEDs written by Shengjun Zhou and published by Springer Nature. This book was released on 2022-05-26 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights state-of-the-art in III-nitrides-based light-emitting diodes (LEDs). Motivated by the application prospects in lighting, high-resolution display, and health & medicine, the book systematically introduces the physical fundamentals, epitaxial growth, and device fabrications of III-nitride-based LEDs. Important topics including the structures of chips, device reliability and measurements and the advances in mini and micro LEDs are also discussed. The book is completed with a decade of research experience of the author’s team in the design and fabrication of III-nitrides-based LEDs, presenting the novel achievements in the stress control of the large mismatch heterostructures, defect formation and inhibition mechanism of the heteroepitaxial growth, LED epitaxial technologies, and the fabrication of high-efficient flip-chip LEDs. The book comprises of a valuable reference source for researchers and professionals engaged in the research and development of III-nitrides-based LEDs.
Download or read book Fabrication of GaN Based Light Emitting Diodes with Anodized Aluminum Oxide Nanoporous Pattern Structures written by 蔡宗杰 and published by . This book was released on 2013 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Light Emitting Diodes written by Jinmin Li and published by Springer. This book was released on 2019-01-07 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive in scope, this book covers the latest progresses of theories, technologies and applications of LEDs based on III-V semiconductor materials, such as basic material physics, key device issues (homoepitaxy and heteroepitaxy of the materials on different substrates, quantum efficiency and novel structures, and more), packaging, and system integration. The authors describe the latest developments of LEDs with spectra coverage from ultra-violet (UV) to the entire visible light wavelength. The major aspects of LEDs, such as material growth, chip structure, packaging, and reliability are covered, as well as emerging and novel applications beyond the general and conventional lightings. This book, written by leading authorities in the field, is indispensable reading for researchers and students working with semiconductors, optoelectronics, and optics. Addresses novel LED applications such as LEDs for healthcare and wellbeing, horticulture, and animal breeding; Editor and chapter authors are global leading experts from the scientific and industry communities, and their latest research findings and achievements are included; Foreword by Hiroshi Amano, one of the 2014 winners of the Nobel Prize in Physics for his work on light-emitting diodes.
Download or read book Fabrication of GaN Based Light Emitting Diodes with Specific Current Blocking and Surface Passivation Layers written by and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fabrication of GaN InGaN Based Light Emitting Diodes LEDs written by 王子峯 and published by . This book was released on 2019 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fabrication of GaN Based Light Emitting Diodes with Specific Ga2O3 and ZrO2 Layers written by and published by . This book was released on 2021 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fabrication and Characterization of GaN Grown on Silicon Vertical Structure Light Emitting Diodes written by Paulo Ki and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Solid State Lighting and LEDs written by Zhe Chuan Feng and published by CRC Press. This book was released on 2017-06-12 with total page 723 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook addresses the development of energy-efficient, environmentally friendly solid-state light sources, in particular semiconductor light emitting diodes (LEDs) and other solid-state lighting devices. It reflects the vast growth of this field and impacts in diverse industries, from lighting to communications, biotechnology, imaging, and medicine. The chapters include coverage of nanoscale processing, fabrication of LEDs, light diodes, photodetectors and nanodevices, characterization techniques, application, and recent advances. Readers will obtain an understanding of the key properties of solid-state lighting and LED devices, an overview of current technologies, and appreciation for the challenges remaining. The handbook will be useful to material growers and evaluators, device design and processing engineers, newcomers, students, and professionals in the field.
Download or read book Fabrication of High Performance Vertical Structure Metallic Substrate GaN and AlGaInP based Light Emitting Diodes written by 郭德明 and published by . This book was released on 2011 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fabrication and Characterization of GaN based Light Emitting Diodes written by Ka-kuen Leung and published by . This book was released on 2010 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book GaN Micro LED Integration with Thin Film Transistors for Flexible Displays written by Mohsen Asad and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The research presented provides a systematic attempt to address the major challenges for the development of flexible micro-light-emitting diode (LED) displays. The feasibility of driving GaN-based micro-LEDs with a-Si:H-based thin-film transistors by using a thin-film bonding and transfer process was initially proposed. This approach was implemented to create an inverted pixel structure where the cathode of the LED is connected directly to the drain contact of the drive TFT resulting in a pixel circuit having more than 2× higher brightness compared to a standard pixel design. This "paste-and-cut" technique was further demonstrated for the development of flexible displays, enabling the study of the effect of mechanical strain and self-heating of the devices on plastic. Through a finite-element analysis, it was determined that the applied stress-induced strain near the quantum wells of the micro-LEDs are negligible for devices with diameters smaller than 20 microns. Thermal simulation of the LEDs on plastic revealed that a copper bond layer thicker than 600 nm can be used to alleviate self-heating effects of the micro-LEDs. Using these design parameters, micro-LED arrays with 20 micron diameter were integrated onto flexible substrates to validate the theoretical predictions. Further scaling of the LED size revealed substrate bending also tilts the direction of the LED structure, allowing further extraction of light. This effect was demonstrated using nanowire LEDs with a 250 nm diameter transferred onto plastic, where the light output could be enhanced by 2× through substrate bending. Finally, through the removal of bulk defect and surface states, fabrication of highly efficient micro-LEDs having > 400% increase in light output (compared to conventional diodes) was achieved. This outcome was accomplished through the removal of the defective buffer region adjacent to the active layers of the LED and minimization of the non-radiative recombination at the sidewalls. The former was accomplished through the removal of the buffer layer after separation of the LED from the process wafer while the latter is accomplished using a surround cathode gate electrode to deplete free carriers from the sidewall of the forward-biased LED. The resulting performance enhancements provided a basis for high-brightness flexible micro-LED displays developed in this dissertation.
Download or read book Nitride Semiconductor Light Emitting Diodes LEDs written by Jian-Jang Huang and published by Woodhead Publishing. This book was released on 2017-10-24 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nitride Semiconductor Light-Emitting Diodes (LEDs): Materials, Technologies, and Applications, Second Edition reviews the fabrication, performance and applications of the technology, encompassing the state-of-the-art material and device development, along with considerations regarding nitride-based LED design. This updated edition is based on the latest research and advances, including two new chapters on LEDs for large displays and laser lighting. Chapters cover molecular beam epitaxy (MBE) growth of nitride semiconductors, modern metalorganic chemical vapor deposition (MOCVD) techniques, the growth of nitride-based materials, and gallium nitride (GaN)-on-sapphire and GaN-on-silicon technologies for LEDs. Nanostructured, non-polar and semi-polar nitride-based LEDs, as well as phosphor-coated nitride LEDs, are also discussed. The book also addresses the performance of nitride LEDs, including photonic crystal LEDs, surface plasmon enhanced LEDs, color tuneable LEDs, and LEDs based on quantum wells and quantum dots. Further chapters discuss the development of LED encapsulation technology and fundamental efficiency droop issues in gallium indium nitride (GaInN) LEDs. It is a technical resource for academics, physicists, materials scientists, electrical engineers, and those working in the lighting, consumer electronics, automotive, aviation, and communications sectors. - Features new chapters on laser lighting, addressing the latest advances on this topic - Reviews fabrication, performance, and applications of this technology that encompass the state-of-the-art material and device development - Covers the performance of nitride LEDs, including photonic crystal LEDs, surface plasmon enhanced LEDs, color tuneable LEDs, and LEDs based on quantum wells and quantum dots - Highlights applications of nitride LEDs, including liquid crystal display (LCD) backlighting, infra-red emitters, and automotive lighting - Provides a comprehensive discussion of gallium nitride on both silicon and sapphire substrates
Download or read book Study and Fabrication of GaN based Micro Light Emitting Diodes written by 陳建儒 and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fabrication and Analysis of GaN based Nanorod Light Emitting Diodes written by 王振印 and published by . This book was released on 2008 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt:
