Download or read book Tuneable Film Bulk Acoustic Wave Resonators written by Spartak Gevorgian and published by Springer Science & Business Media. This book was released on 2013-02-01 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: To handle many standards and ever increasing bandwidth requirements, large number of filters and switches are used in transceivers of modern wireless communications systems. It makes the cost, performance, form factor, and power consumption of these systems, including cellular phones, critical issues. At present, the fixed frequency filter banks based on Film Bulk Acoustic Resonators (FBAR) are regarded as one of the most promising technologies to address performance -form factor-cost issues. Even though the FBARs improve the overall performances the complexity of these systems remains high.a Attempts are being made to exclude some of the filters by bringing the digital signal processing (including channel selection) as close to the antennas as possible. However handling the increased interference levels is unrealistic for low-cost battery operated radios. Replacing fixed frequency filter banks by one tuneable filter is the most desired and widely considered scenario. As an example, development of the software based cognitive radios is largely hindered by the lack of adequate agile components, first of all tuneable filters. In this sense the electrically switchable and tuneable FBARs are the most promising components to address the complex cost-performance issues in agile microwave transceivers, smart wireless sensor networks etc.Tuneable Film Bulk Acoustic Wave Resonators discusses FBAR need, physics, designs, modelling, fabrication and applications. Tuning of the resonant frequency of the FBARs is considered. Switchable and tuneable FBARs based on electric field induced piezoelectric effect in paraelectric phase ferroelectrics are covered. The resonance of these resonators may be electrically switched on and off and tuned without hysteresis.The book is aimed at microwave and sensor specialists in the industry and graduate students. Readers will learn about principles of operation and possibilities of the switchable and tuneable FBARs, and will be given general guidelines for designing, fabrication and applications of these devices."

Download or read book Surface Acoustic Wave Devices in Telecommunications written by Ken-Ya Hashimoto and published by Springer Science & Business Media. This book was released on 2000-06-21 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface acoustic wave (SAW) devices are widely used in mobile communications, a rapidly evolving market. This book gives an overview on the latest SAW technologies with an emphasis on the design and simulation of devices, such as resonator-based devices employing the SH-type leaky SAW.

Download or read book Graphene Photonics written by Jia-Ming Liu and published by Cambridge University Press. This book was released on 2018-12-13 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene is a single-layer crystal of carbon, the thinnest two-dimensional material. It has unique electronic and photonic properties.

Download or read book Piezoelectric MEMS Resonators written by Harmeet Bhugra and published by Springer. This book was released on 2017-01-09 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces piezoelectric microelectromechanical (pMEMS) resonators to a broad audience by reviewing design techniques including use of finite element modeling, testing and qualification of resonators, and fabrication and large scale manufacturing techniques to help inspire future research and entrepreneurial activities in pMEMS. The authors discuss the most exciting developments in the area of materials and devices for the making of piezoelectric MEMS resonators, and offer direct examples of the technical challenges that need to be overcome in order to commercialize these types of devices. Some of the topics covered include: Widely-used piezoelectric materials, as well as materials in which there is emerging interest Principle of operation and design approaches for the making of flexural, contour-mode, thickness-mode, and shear-mode piezoelectric resonators, and examples of practical implementation of these devices Large scale manufacturing approaches, with a focus on the practical aspects associated with testing and qualification Examples of commercialization paths for piezoelectric MEMS resonators in the timing and the filter markets ...and more! The authors present industry and academic perspectives, making this book ideal for engineers, graduate students, and researchers.

Download or read book Carbon Nanotube and Graphene Device Physics written by H.-S. Philip Wong and published by Cambridge University Press. This book was released on 2011 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first introductory textbook to explain the properties and performance of practical nanotube devices and related applications.

Download or read book Perovskite Photovoltaics written by Aparna Thankappan and published by Academic Press. This book was released on 2018-06-29 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: Perovskite Photovoltaics: Basic to Advanced Concepts and Implementation examines the emergence of perovskite photovoltaics, associated challenges and opportunities, and how to achieve broader development. Consolidating developments in perovskite photovoltaics, including recent progress solar cells, this text also highlights advances and the research necessary for sustaining energy. Addressing different photovoltaics fields with tailored content for what makes perovskite solar cells suitable, and including commercialization examples of large-scale perovskite solar technology. The book also contains a detailed analysis of the implementation and economic viability of perovskite solar cells, highlighting what photovoltaic devices need to be generated by low cost, non-toxic, earth abundant materials using environmentally scalable processes. This book is a valuable resource engineers, scientists and researchers, and all those who wish to broaden their knowledge on flexible perovskite solar cells. - Includes contributions by leading solar cell academics, industrialists, researchers and institutions across the globe - Addresses different photovoltaics fields with tailored content for what makes perovskite solar cells different - Provides commercialization examples of large-scale perovskite solar technology, giving users detailed analysis on the implementation, technical challenges and economic viability of perovskite solar cells

Download or read book Oxide Electronics written by Asim K. Ray and published by John Wiley & Sons. This book was released on 2021-04-12 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxide Electronics Multiple disciplines converge in this insightful exploration of complex metal oxides and their functions and properties Oxide Electronics delivers a broad and comprehensive exploration of complex metal oxides designed to meet the multidisciplinary needs of electrical and electronic engineers, physicists, and material scientists. The distinguished author eschews complex mathematics whenever possible and focuses on the physical and functional properties of metal oxides in each chapter. Each of the sixteen chapters featured within the book begins with an abstract and an introduction to the topic, clear explanations are presented with graphical illustrations and relevant equations throughout the book. Numerous supporting references are included, and each chapter is self-contained, making them perfect for use both as a reference and as study material. Readers will learn how and why the field of oxide electronics is a key area of research and exploitation in materials science, electrical engineering, and semiconductor physics. The book encompasses every application area where the functional and electronic properties of various genres of oxides are exploited. Readers will also learn from topics like: Thorough discussions of High-k gate oxide for silicon heterostructure MOSFET devices and semiconductor-dielectric interfaces An exploration of printable high-mobility transparent amorphous oxide semiconductors Treatments of graphene oxide electronics, magnetic oxides, ferroelectric oxides, and materials for spin electronics Examinations of the calcium aluminate binary compound, perovoksites for photovoltaics, and oxide 2Degs Analyses of various applications for oxide electronics, including data storage, microprocessors, biomedical devices, LCDs, photovoltaic cells, TFTs, and sensors Suitable for researchers in semiconductor technology or working in materials science, electrical engineering, and physics, Oxide Electronics will also earn a place in the libraries of private industry researchers like device engineers working on electronic applications of oxide electronics. Engineers working on photovoltaics, sensors, or consumer electronics will also benefit from this book.

Download or read book Metal Nanocrystals written by Kallum M. Koczkur and published by American Chemical Society. This book was released on 2020-07-31 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our society depends heavily on metals. They are ubiquitous construction materials, critical interconnects in integrated circuits, common coinage materials, and more. Excitingly, new uses for metals are emerging with the advent of nanoscience, as metal crystals with nanoscale dimensions can display new and tunable properties. The optical and photothermal properties of metal nanocrystals have led to cancer diagnosis and treatment platforms now in clinical trials, while, at the same time, the ability to tune the surface features of metal nanocrystals is giving rise to designer catalysts that enable more sustainable use of precious resources. These are just two examples of how metal nanocrystals are addressing important social needs.

Download or read book Lab on Fiber Technology written by Andrea Cusano and published by Springer. This book was released on 2014-07-29 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on a research field that is rapidly emerging as one of the most promising ones for the global optics and photonics community: the “lab-on-fiber” technology. Inspired by the well-established "lab on-a-chip" concept, this new technology essentially envisages novel and highly functionalized devices completely integrated into a single optical fiber for both communication and sensing applications. Based on the R&D experience of some of the world's leading authorities in the fields of optics, photonics, nanotechnology, and material science, this book provides a broad and accurate description of the main developments and achievements in the lab-on-fiber technology roadmap, also highlighting the new perspectives and challenges to be faced. This book is essential for scientists interested in the cutting-edge fiber optic technology, but also for graduate students.

Download or read book Fantastic Phenomena written by and published by Children's Press(CT). This book was released on 2007-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The experiments in this book will help you get the lowdown on all the cool and fantastic phenomena that are right in front of you!

Download or read book Frontiers of Graphene and Carbon Nanotubes written by Kazuhiko Matsumoto and published by Springer. This book was released on 2015-03-05 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on carbon nanotubes and graphene as representatives of nano-carbon materials, and describes the growth of new technology and applications of new devices. As new devices and as new materials, nano-carbon materials are expected to be world pioneers that could not have been realized with conventional semiconductor materials, and as those that extend the limits of conventional semiconductor performance. This book introduces the latest achievements of nano-carbon devices, processes, and technology growth. It is anticipated that these studies will also be pioneers in the development of future research of nano-carbon devices and materials. This book consists of 18 chapters. Chapters 1 to 8 describe new device applications and new growth methods of graphene, and Chapters 9 to 18, those of carbon nanotubes. It is expected that by increasing the advantages and overcoming the weak points of nanocarbon materials, a new world that cannot be achieved with conventional materials will be greatly expanded. We strongly hope this book contributes to its development.

Download or read book Graphene Functionalization Strategies written by Anish Khan and published by Springer Nature. This book was released on 2019-10-17 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses various aspects of graphene fictionalization strategies from inorganic oxides and organic moieties including preparation, design, and characterization of functionalization material and its applications. Including illustrations and tables summarizing the latest research on manufacturing, design, characterization and applications of graphene functionalization, it describes graphene functionalization using different techniques and materials and highlights the latest technologies in the field of manufacturing and design. This book is a valuable reference resource for lecturers, students, researchers and industrialists working in the field of material science, especially polymer composites.

Download or read book Molecular Plasmonics written by Wolfgang Fritzsche and published by John Wiley & Sons. This book was released on 2014-07-29 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adopting a novel approach, this book provides a unique "molecular perspective" on plasmonics, concisely presenting the fundamentals and applications in a way suitable for beginners entering this hot field as well as for experienced researchers and practitioners. It begins by introducing readers to the optical effects that occur at the nanoscale and particularly their modification in the presence of biomolecules, followed by a concise yet thorough overview of the different methods for the actual fabrication of nanooptical materials. Further chapters address the relevant nanooptics, as well as the various approaches to combining nanostructures and biomolecules to achieve certain desired functionalities for applications in the fields of probing, sensing and particle manipulation. For analytical biologists, physical chemists, materials scientists and medicinal chemists.

Download or read book Fundamentals and Applications of Nanophotonics written by Joseph W. Haus and published by Woodhead Publishing. This book was released on 2016-01-09 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals and Applications of Nanophotonics includes a comprehensive discussion of the field of nanophotonics, including key enabling technologies that have the potential to drive economic growth and impact numerous application domains such as ICT, the environment, healthcare, military, transport, manufacturing, and energy. This book gives readers the theoretical underpinnings needed to understand the latest advances in the field. After an introduction to the area, chapters two and three cover the essential topics of electrodynamics, quantum mechanics, and computation as they relate to nanophotonics. Subsequent chapters explore materials for nanophotonics, including nanoparticles, photonic crystals, nanosilicon, nanocarbon, III-V, and II-VI semiconductors. In addition, fabrication and characterization techniques are addressed, along with the importance of plasmonics, and the applications of nanophotonics in devices such as lasers, LEDs, and photodetectors. - Covers electrodynamics, quantum mechanics and computation as these relate to nanophotonics - Reviews materials, fabrication and characterization techniques for nanophotonics - Describes applications of the technology such as lasers, LEDs and photodetectors

Download or read book Optical Antennas written by Mario Agio and published by Cambridge University Press. This book was released on 2013-01-03 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: This consistent and systematic review of recent advances in optical antenna theory and practice brings together leading experts in the fields of electrical engineering, nano-optics and nano-photonics, physical chemistry and nanofabrication. Fundamental concepts and functionalities relevant to optical antennas are explained, together with key principles for optical antenna modelling, design and characterisation. Recognising the tremendous potential of this technology, practical applications are also outlined. Presenting a clear translation of the concepts of radio antenna design, near-field optics and field-enhanced spectroscopy into optical antennas, this interdisciplinary book is an indispensable resource for researchers and graduate students in engineering, optics and photonics, physics and chemistry.

Download or read book Tribology of Graphene written by Oleksiy V. Penkov and published by Elsevier. This book was released on 2020-01-08 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology of Graphene: Simulation Methods, Preparation Methods, and Their Applications provides an exhaustive reference guide on the tribology of graphene-based materials. The book begins with a discussion on the selection of the proper graphene-based material and then segues into how to choose a deposition method, how to control of its structure and properties, and the most effective working conditions and applications. The latest developments in theoretical simulations of graphene friction, preparation methods, and effective applications are all reviewed, as are the ways various graphene coatings can be successfully employed to decrease friction and wear in nano-, micro- and macro-mechanical applications. - Synthesizes the broad current research in tribological applications of graphene all in one place - Covers theoretical simulations and preparation methods, including insights on how to put them into practice, allowing for quicker and more effective selection of graphene-based material - Provides a broader perspective by discussing both graphene-based composites and additives

Download or read book FOUNDATIONS FOR MICROWAVE ENGINEERING 2ND ED written by Robert E. Collin and published by John Wiley & Sons. This book was released on 2007 with total page 948 pages. Available in PDF, EPUB and Kindle. Book excerpt: About The Book: The book covers the major topics of microwave engineering. Its presentation defines the accepted standard for both advanced undergraduate and graduate level courses on microwave engineering. It is an essential reference book for the practicing microwave engineer